Highly stable and fast-dissolving ascorbic acid-loaded microneedles.

OBJECTIVES: Ascorbic acid has many benefits to the skin. Numerous attempts to promote its topical delivery show great challenges since its chemical instability and poor skin impermeability. Microneedle delivery is a simple, safe, painless and effective means to deliver therapeutic or nourishing molecules into the skin. The purpose of this study was twofold: (a) to develop a new formulation of ascorbic acid-loaded microneedles to enhance ascorbic acid stability by investigating an optimal amount of polyethyleneimine as an additive to the dextran-based microneedle formulation and (b) to assess microneedle properties in terms of dissolving rate, skin penetration ability, biocompatibility and antimicrobial activity. METHODS: The microneedles formulated with ascorbic acid and varied polyethyleneimine concentrations were fabricated and subsequently tested for ascorbic acid stability using 2,2-diphenyl-1-picrylhydrazyl assay. The dissolution rate and skin penetration depth were investigated in porcine skin and the reconstructed human full-thickness skin model respectively. The skin irritation tests were done according to the Organisation for Economic Co-operation and Development Test Guideline No. 439. An antimicrobial disc susceptibility test was performed against Escherichia coli, Staphylococcus aureus and Staphylococcus epidermidis. RESULTS: Among varied amounts of 0%, 1.5%, 3.0% and 4.5% (w/v), the 3.0% polyethyleneimine showed the most desirable characteristics, including well-preserved shape integrity after demoulding, significantly improved stability of ascorbic acid (p < 0.001) from 33% to 96% antioxidant activity after 8 weeks of storage at 40°C, increased dissolving rate (p < 0.001) by being completely dissolved within 2 min after the skin insertion, passing skin penetration and biocompatibility tests as well as having a broad spectrum of antimicrobial property. CONCLUSION: With a safety profile and enhanced properties, the new formulation of ascorbic acid-loaded microneedles shows outstanding potential as commercially available cosmetics and healthcare products.

OBJECTIFS: L'acide ascorbique présente de nombreux avantages pour la peau. De nombreuses tentatives pour promouvoir sa délivrance topique présentent de grands défis en raison de son instabilité chimique et de sa faible imperméabilité cutanée. L'administration de micro-aiguilles est un moyen simple, sûr, indolore et efficace d'administrer des molécules thérapeutiques ou nourrissantes dans la peau. Le but de cette étude était double : a) développer une nouvelle formulation de microaiguilles chargées d'acide ascorbique pour améliorer la stabilité de l'acide ascorbique en étudiant une quantité optimale de polyéthylèneimine comme additif à la formulation de microaiguilles à base de dextrane ; et b) évaluer les propriétés des micro-aiguilles en termes de vitesse de dissolution, de capacité de pénétration cutanée, de biocompatibilité et d'activité antimicrobienne. MÉTHODES: Les microaiguilles formulées avec de l'acide ascorbique et des concentrations variées de polyéthylèneimine ont été fabriquées et ensuite testées pour la stabilité de l'acide ascorbique à l'aide d'un dosage de 2,2-diphényl-1-picrylhydrazyle. Le taux de dissolution et la profondeur de pénétration de la peau ont été étudiés dans la peau de porc et le modèle de peau humaine reconstruite de pleine épaisseur, respectivement. Les tests d'irritation cutanée ont été effectués conformément à la ligne directrice n° 439 de l'Organisation de coopération et de développement économiques. Un test de sensibilité du disque antimicrobien a été réalisé contre Escherichia coli, Staphylococcus aureus et Staphylococcusepidermidis. RÉSULTATS: Parmi des quantités variées de 0, 1,5, 3,0 et 4,5 % (p/v), la polyéthylèneimine à 3,0 % a montré les caractéristiques les plus souhaitables, notamment une intégrité de forme bien préservée après démoulage, une stabilité significativement améliorée de l'acide ascorbique (p ⟨ 0,001) de 33 % à 96 % d'activité antioxydante après 8 semaines de stockage à 40 °C, augmentation du taux de dissolution (p ⟨ 0,001) en étant complètement dissous dans les2 minutes suivant l'insertion de la peau, en passant les tests de pénétration cutanée et de biocompatibilité, ainsi qu'en ayant un large spectre de propriétés antimicrobiennes. CONCLUSION: Avec un profil d'innocuité et des propriétés améliorées, la nouvelle formulation de micro-aiguilles chargées d'acide ascorbique présente un potentiel exceptionnel en tant que produits cosmétiques et de soins de santé disponibles dans le commerce.

Kinetics of domain registration in multicomponent lipid bilayer membranes.

The kinetics of registration of lipid domains in the apposing leaflets of symmetric bilayer membranes is investigated via systematic dissipative particle dynamics simulations. The decay of the distance between the centres of mass of the domains in the apposing leaflets is almost linear during early stages, and then becomes exponential during late times. The time scales of both linear and exponential decays are found to increase with decreasing strength of interleaflet coupling. The ratio between the time scales of the exponential and linear regimes decreases with increasing domain size, implying that the decay of the distance between the domains' centres of mass is essentially linear for large domains. These numerical results are largely in agreement with the recent theoretical predictions of Han and Haataja [Soft Matter, 2013, 9, 2120-2124]. We also found that the domains become elongated during the registration process.

Zinc Oxide Synthesis from Extreme Ratios of Zinc Acetate and Zinc Nitrate: Synergistic Morphology.

The synthesis of ZnO comprising different ratios of zinc acetate (ZA) and zinc nitrate (ZN) from the respective zinc precursor solutions was successfully completed via a simple precipitation method. Zinc oxide powders with different mole ratios of ZA/ZN were produced-80/1, 40/1, and 20/1. The crystallinity, microstructure, and optical properties of all produced ZnO powders were characterized using X-ray diffraction (XRD), scanning electron microscopy (SEM), and UV-Vis-NIR spectrophotometry. The average agglomerated particle sizes of ZnO-80/1, ZnO-40/1, and ZnO-20/1 were measured at 655, 640, and 620 nm, respectively, using dynamic light scattering (DLS). The optical properties of ZnO were significantly affected by the extreme ratio differences in the zinc precursors. ZnO-80/1 was found to have a unique coral-sheet structure morphology, which resulted in its superior ability to reflect near-infrared (NIR) radiation compared to ZnO-40/1 and ZnO-20/1. The NIR-shielding performances of ZnO were assessed using a thermal insulation test, where coating with ZnO-80/1 could lower the inner temperature by 5.2 °C compared with the neat glass substrate. Due to the synergistic effects on morphology, ZnO-80/1 exhibited the property of enhanced NIR shielding in curtailing the internal building temperature, which allows for its utilization as an NIR-reflective pigment coating in the construction of building envelopes.

Novel Solvent-Latex Mixing: Thermal Insulation Performance of Silica Aerogel/Natural Rubber Composite.

In this work, the novel natural rubber latex (NRL) mixing was approached. The mixing process was carried out by using n-hexane as the dispersed phase of silica aerogel which acted as thermal insulation filler prior to NRL mixing. The silica aerogel/NR composites were prepared with different silica aerogel contents of 20, 40, 60, 80, and 100 parts per hundred rubber (phr). The morphology of the 40 phr composite showed the NR macropore formation with silica aerogel intercalated layers. The optimal content of silica aerogels and n-hexane were the key to obtaining the NR macropore. The thermal insulation performance of silica aerogel/NR composites was investigated because of their porous structures. The thermal conductivity of the composites were lower than that of the neat NR sheet and decreased from 0.081 to 0.055 W m-1·K-1 with increasing silica aerogel content. The lower densities of the composites than that of the NR sheet were revealed noticeably. In addition, the silica aerogel/NR composites exhibited a higher heat retardant ability than that of the NR sheet, and the comparable glass transition temperatures (Tg) of the composites and the neat NR indicated the maintained flexibility at ambient temperature or higher, which can benefit various temperature applications. The overall results demonstrated that the silica aerogel/NR composites from the novel NRL mixing preparation could be a promising technique to develop the porous materials and be utilised as thermal insulation products and building constructions.

Leptospirosis research: fast, easy and reliable enumeration of mobile leptospires.

Leptospirosis caused by Leptospira interrogans is the most widespread zoonosis and a major public health problem worldwide. Based on light-scattering and absorption, quantification of leptospires using UV-VIS spectroscopy was used as an indirect counting technique by measuring the optical density and comparing this to automated direct counting using a counting chamber in combination with imaging and analyzing software. Two serovars, Bangkok and Copenhagenii, from log-phase growth were used for the establishment of standard curves. They were found to be linear and slightly different in gradient for each serovar. The ease, rapidity, and reliability of these two adapted and optimized counting techniques may provide a useful alternative enumeration technique for leptospirosis research.

Chemical force mapping of phosphate and carbon on acid-modified tapioca starch surface.

Surface chemical microstructure of hydrochloric acid hydrolyzed tapioca starch producing different amylose:amylopectin (Am:Ap) ratios were studied with scanning chemical force microscopy (CFM). The chemical force probes were functionalized of two types with -OH (phosphate specific) and -CH3 (carbon specific). Lateral force trace-minus-retrace (TMR) images from -OH and -CH3 probes revealed changes in the phosphate domains and the carbon backbone for the varying acid hydrolyzed tapioca starch compared to that of the native tapioca starch. Scanning electron micrographs (SEM) showed different degree of the granule surface disruption before and after hydrolysis. The exterior structures of the acid hydrolyzed starch granules were chemically investigated with CFM to study the relationships of the surface molecular structures and the Am:Ap ratios.

The stochastic model of non-equilibrium mutagen-induced alterations of DNA: implication to genetic instability in cancer.

Genetic alterations such as point mutations, chromosomal rearrangements, modification of DNA methylation and chromosome aberrations accumulate during the lifetime of an organism. They can be caused by intrinsic errors in the DNA replication and repair as well as by external factors such as exposure to mutagenic substances or radiation. The main purpose of the present work is to begin an exploration of the stochastic nature of non-equilibrium DNA alteration caused by events such as tautomeric shifts. This is done by modeling the genetic DNA code chain as a sequence of DNA-bit values ('1' for normal bases and '-1' for abnormal bases). We observe the number of DNA-bit changes resulting from the random point mutation process which, in the model, is being induced by a stochastic Brownian mutagen (BM) as it diffuses through the DNA-bit systems. Using both an analytical and Monte Carlo (MC) simulation techniques, we observe the local and global number of DNA-bit changes. It is found that in 1D, the local DNA-bit density behaves like 1/t, the global total number of the switched (abnormal) DNA-bit increases as t. The probability distribution P(b, 0, t) of b(0, t) is log-normal. It is also found that when the number of mutagens is increased, the number of the total abnormal DNA-bits does not grow linearly with the number of mutagens. All analytic results are in good agreement with the simulation results.

Effects of static magnetic field on growth of leptospire, Leptospira interrogans serovar canicola: immunoreactivity and cell division.

The effects of the exposure of the bacterium, Leptospira interrogans serovar canicola to a constant magnetic field with magnetic flux density from a permanent ferrite magnet=140+/-5 mT were studied. Changes in Leptospira cells after their exposure to the field were determined on the basis of changes in their growth behavior and agglutination immunoreactivity with a homologous antiserum using dark-field microscopy together with visual imaging. The data showed that the exposed Leptospira cells have lower densities and lower agglutination immunoreactivity than the unexposed control group. Interestingly, some of the exposed Leptospira cells showed abnormal morphologies such as large lengths. We discussed some of the possible reasons for these observations.

Leptospirosis: current situation and trends of specific laboratory tests.

Leptospirosis is re-emerging as a worldwide zoonosis and is caused by bacteria of the genus Leptospira. Human leptospirosis is associated with high temperature and humidity. Laboratory tests are indispensible for the early diagnosis and proper disease management. The demand for suitable leptospirosis point-of-care diagnostic tests grows with the awareness and number of incidences. Confirmation is achieved by the microscopic agglutination test, bacterial cultivation, PCR or histopathologic methods. However, high costs, poor standardization and/or elaborate sample preparation prevent routine use at the point of care. Cost-efficient, but insensitive serological methods dominate the diagnostic landscape and, likewise, urgently need improvement toward greater compliance with some of the point-of-care criteria. Combined application of antigen and antibody detection methods increases accuracy, but also new development or transfer of diagnostic technologies should be considered useful. Nano- and microparticle technology may play a key role in improving future antigen detection methods.

Development of a magnetic bead fluorescence microscopy immunoassay to detect and quantify Leptospira in environmental water samples.

Climate change, world population growth, and poverty have led to an increase in the incidence of leptospirosis. Leptospirosis is caused by pathogenic spirochaete bacteria that belong to the genus Leptospira. The bacteria are maintained in the renal tubules of the reservoir hosts (typically a rodent), then shed into the environment via the urine. Water is key for environmental survival and transmission, as leptospires can survive for several weeks in a moist environment. Therefore, environmental epidemiological studies are needed to study the contamination of environmental water sources. However, few such studies have been performed using cultivation of the isolates and PCR assays. But, leptospira cultivation can be easily contaminated by other organisms and takes usually several weeks. Moreover, PCR is a complex and costly analysis for the underdeveloped countries that have the highest incidence of leptospirosis. In this study, we describe two modifications of a fluorescence microscopy assay based on immuno-magnetic separation (IMS) to detect leptospires in environmental water samples that mainly differ in fluorescent dye staining. The first type uses acridine orange fluorescent dye staining combined with multiplexed IMS for sample screening. The detection limit ranged from 10(2) to 10(3) organisms per mL and largely depended on the capture efficiency (CE) of the immuno-magnetic particles. The second type uses serogroup-specific immuno-particles and direct fluorescence antibody staining (DFA) to detect leptospires; the detection limit of this second assay was approximately 10(1) cells per mL. Both assay types were applied to natural and experimentally infected water samples, which were also analysed with DFM and real-time PCR. Our data show that the fluorescent microscopy immunoassay successfully identified experimental leptospire contamination and was as sensitive as PCR. This modified immune-fluorescence assay may therefore enable epidemiological studies of leptospirosis.

Stochastic cellular automata model and Monte Carlo simulations of CD4+ T cell dynamics with a proposed alternative leukapheresis treatment for HIV/AIDS.

Acquired Immunodeficiency Syndrome (AIDS) is responsible for millions of deaths worldwide. To date, many drug treatment regimens have been applied to AIDS patients but none has resulted in a successful cure. This is mainly due to the fact that free HIV particles are frequently in mutation, and infected CD4(+) T cells normally reside in the lymphoid tissue where they cannot (so far) be eradicated. We present a stochastic cellular automaton (CA) model to computationally study what could be an alternative treatment, namely Leukapheresis (LCAP), to remove HIV infected leukocytes in the lymphoid tissue. We base our investigations on Monte Carlo computer simulations. Our major objective is to investigate how the number of infected CD4(+) T cells changes in response to LCAP during the short-time (weeks) and long-time (years) scales of HIV/AIDS progression in an infected individual. To achieve our goal, we analyze the time evolution of the CD4(+) T cell population in the lymphoid tissue (i.e., the lymph node) for HIV dynamics in treatment situations with various starting times and frequencies and under a no treatment condition. Our findings suggest that the effectiveness of the treatment depends mainly on the treatment starting time and the frequency of the LCAP. Other factors (e.g., the removal proportion, the treatment duration, and the state of removed cells) that likely influence disease progression are subjects for further investigation.

Leptospirosis research: fast, easy and reliable enumeration of mobile leptospires

Leptospirosis caused by Leptospira interrogans is the most widespread zoonosis and a major public health problem worldwide. Based on light-scattering and absorption, quantification of leptospires using UV-VIS spectroscopy was used as an indirect counting technique by measuring the optical density and comparing this to automated direct counting using a counting chamber in combination with imaging and analyzing software. Two serovars, Bangkok and Copenhagenii, from log-phase growth were used for the establishment of standard curves. They were found to be linear and slightly different in gradient for each serovar. The ease, rapidity, and reliability of these two adapted and optimized counting techniques may provide a useful alternative enumeration technique for leptospirosis research.