Quantum Gas-Enabled Direct Mapping of Active Current Density in Percolating Networks of Nanowires.

Electrically percolating nanowire networks are among the most promising candidates for next-generation transparent electrodes. Scientific interest in these materials stems from their intrinsic current distribution heterogeneity, leading to phenomena like percolating pathway rerouting and localized self-heating, which can cause irreversible damage. Without an experimental technique to resolve the current distribution and an underpinning nonlinear percolation model, one relies on empirical rules and safety factors to engineer materials. We introduce Bose-Einstein condensate microscopy to address the longstanding problem of imaging active current flow in 2D materials. We report on performance improvement of this technique whereby observation of dynamic redistribution of current pathways becomes feasible. We show how this, combined with existing thermal imaging methods, eliminates the need for assumptions between electrical and thermal properties. This will enable testing and modeling individual junction behavior and hot-spot formation. Investigating both reversible and irreversible mechanisms will contribute to improved performance and reliability of devices.

Tunable 2D Conjugated Porous Organic Polymer Films for Precise Molecular Nanofiltration and Optoelectronics.

Structural design of 2D conjugated porous organic polymer films (2D CPOPs), by tuning linkage chemistries and pore sizes, provides great adaptability for various applications, including membrane separation. Here, four free-standing 2D CPOP films of imine- or hydrazone-linked polymers (ILP/HLP) in combination with benzene (B-ILP/HLP) and triphenylbenzene (TPB-ILP/HLP) aromatic cores are synthesized. The anisotropic disordered films, composed of polymeric layered structures, can be exfoliated into ultrathin 2D-nanosheets with layer-dependent electrical properties. The bulk CPOP films exhibit structure-dependent optical properties, triboelectric nanogenerator output, and robust mechanical properties, rivaling previously reported 2D polymers and porous materials. The exfoliation energies of the 2D CPOPs and their mechanical behavior at the molecular level are investigated using density function theory (DFT) and molecular dynamics (MD) simulations, respectively. Exploiting the structural tunability, the comparative organic solvent nanofiltration (OSN) performance of six membranes having different pore sizes and linkages to yield valuable trends in molecular weight selectivity is investigated. Interestingly, the OSN performances follow the predicted transport modeling values based on theoretical pore size calculations, signifying the existence of permanent porosity in these materials. The membranes exhibit excellent stability in organic solvents at high pressures devoid of any structural deformations, revealing their potential in practical OSN applications.

Optimization of process parameters of refractance window drying for aonla slices and comparison with other drying techniques.

BACKROUND: Aonla is as a good source of antioxidants due to its high ascorbic acid and polyphenol contents. However, because of its high acidity and astringent taste, aonla is rarely consumed in its fresh form. As the constituents in aonla are heat sensitive, it is essential to find a suitable drying method for preservation. Therefore, refractance window drying (RWD) of aonla slices was studied as it has the potential of retaining heat-sensitive compounds. RESULTS: The effect of RWD process variables, namely water temperature (75, 82.5, 90 °C) and slice thickness (2, 4, 6 mm), on different quality parameters of dehydrated aonla was studied. Increasing water temperature resulted in significantly higher ascorbic acid content, titratable acidity and product temperature, while total phenolic content, free radical scavenging activity and moisture content decreased. With the exception of product temperature, higher slice thickness led to an increase in the values of all the parameters. At the optimized processing conditions of 83 °C water temperature and 4 mm slice thickness, the ascorbic acid content, total phenolic content, free radical scavenging activity, titratable acidity and moisture content values were found to be 269.03 mg (100 g)-1, 242.33 mg (100 g)-1, 87.11%, 3.62% and 4% respectively. The aonla slices subjected to RWD also possessed 4-6% higher phytochemical content than osmotically dried and hot-air-dried samples. CONCLUSION: This research highlights the effectiveness of RWD in preserving heat-sensitive compounds in food like aonla. The RW-dried slices had a smoother and more uniform microstructure compared to osmotically dried and hot-air-dried samples. © 2024 Society of Chemical Industry.

α-Amylase inhibitory, antioxidant and emulsification potential of glycoproteinaceous bioactive molecule from Lactobacillus delbrueckii.

The bioactive components of microbial origin have been extensively applied to restrict the enormous enzyme-catalyzed processes. Hence, the present study was executed to explore the α -amylase inhibition (AAI) potential of glycoprotein isolated from Lactobacillus delbrueckii (LGp) to regulate in vitro starch hydrolysis. As a non-competitive inhibitor, the protein exhibited AAI (85%) with, IC50 135 ± 0.55 µg/mL. It was stable over a broad range of pH (3-11) and temperature (25-75 °C). Furthermore, LGp was significantly effective against amylase and starch from different sources. In addition, it also exhibited antioxidant and emulsifying potential. The UV, FT-IR and fluorescence analysis affirm the alterations in amylase molecular conformation after interaction with the LGp inhibitor. These results provide a substantial basis for the future use of LGp for controlled starch hydrolysis in vitro and as an antioxidant and emulsifying agent in the food industry.

Development and evaluation of a vacuum impregnation system for enhancement of biochemical properties of food materials.

Vacuum impregnation is a novel methodology for adding various substances to porous foods. This study aimed to develop a cost effective automate system for vacuum impregnation of food materials to enhance their nutritional, functional and sensory properties depending on the functionality of the impregnation solution. The developed vacuum impregnation system includes a vacuum chamber, vacuum pump and an automation setup for creating and maintaining vacuum conditions, feeding impregnated solutions to the samples and releasing vacuum. Fresh-cut spinach leaves were impregnated with ascorbic acid (AsA) and calcium chloride (Cacl2) (10% concentration) in the setup in order to test the effect of the process on some biochemical properties. Statistical analysis revealed significant effect of vacuum impregnation on the biochemical properties (total soluble solids, total phenolic content, flavonoid content and free radical scavenging activity) and color of spinach leaves during storage up to 4 days. Impregnation process showed significant increase in the total phenolic and flavonoid content of the spinach leaves. Increment up to 78% in antioxidant activity was seen for the uncoated impregnated leaves as compared to 59% activity in untreated samples. Thus, products with desired parameters can be produced with this process with minimal impact on their properties at a lower cost and in a shorter time period.

Evaluation of thermo-adaptability between Tharparkar (Bos indicus) and crossbred (Bos indicus X Bos taurus) calves in a controlled environment.

The global warming driven climate change has increased the susceptibility of livestock around the globe to heat stress (HS), which reduces animal productivity and threatens the sustainability of marginal farmers. The objective of this investigation was to evaluate thermo-adaptability between Tharparkar calves (TC), an indigenous milch breed of India and crossbred calves (CC) during induced heat stress in controlled environment. For this purpose, 12 apparently healthy male calves (six in each group) aged 5-6 months, were selected. The experiment was conducted at physiologically comfortable temperature (25 °C), moderate HS (31 °C) and severe HS (37 °C) for 21 days each in a psychrometric chamber. In each experimental day, the calves were exposed to 6 h of heat. There were 7 days of acclimatization period before experiment and 10 days of recovery period at ambient temperature between each 21 day exposure period. During experimental period, the blood was collected at 1st, 6th, 11th, 16th, 21st day and among ten-day recovery period the blood was collected at 5th day. Physiological responses, serum electrolytes, metabolic enzymes profiles, antioxidant capacity, oxidative stress status and general endocrine milieu were studied. Relative mRNA expression study of Heat Shock Protein (HSP) 70, HSP90, induced Nitric Oxide Synthase (iNOS) and endothelial NOS (eNOS) were carried out by qPCR. There was significant (p < 0.05) change in the displacement in rectal temperature, respiration rate, serum alanine aminotransferase level between two breeds at moderate and severe HS. Similar change was observed in total antioxidant capacity, superoxide dismutase, and endocrinological parameters. The comparatively lower mRNA expression of HSP70 and higher expression of HSP90 in TC than CC point the better thermo-adaptability of the same. The results of the experiment indicated that TC are more thermo-adaptable than CC at different modality of stress in controlled temperature conditions.

Graphene Confers Ultralow Friction on Nanogear Cogs.

Friction-induced energy dissipation impedes the performance of nanomechanical devices. Nevertheless, the application of graphene is known to modulate frictional dissipation by inducing local strain. This work reports on the nanomechanics of graphene conformed on different textured silicon surfaces that mimic the cogs of a nanoscale gear. The variation in the pitch lengths regulates the strain induced in capped graphene revealed by scanning probe techniques, Raman spectroscopy, and molecular dynamics simulation. The atomistic visualization elucidates asymmetric straining of CC bonds over the corrugated architecture resulting in distinct friction dissipation with respect to the groove axis. Experimental results are reported for strain-dependent solid lubrication which can be regulated by the corrugation and leads to ultralow frictional forces. The results are applicable for graphene covered corrugated structures with movable components such as nanoelectromechanical systems, nanoscale gears, and robotics.

Non-destructive classification and prediction of aflatoxin-B1 concentration in maize kernels using Vis-NIR (400-1000 nm) hyperspectral imaging.

Aflatoxin-B1 contamination in maize is a major food safety issue across the world. Conventional detection technique of toxins requires highly skilled technicians and is time-consuming. Application of appropriate chemometrics along with hyperspectral imaging (HSI) can identify aflatoxin-B1 infected maize kernels. Present study was undertaken to classify 240 maize kernels inoculated with six different concentrations (25, 40, 70, 200, 300 and 500 ppb) of aflatoxin-B1 by using Vis-NIR HSI. The reflectance spectral data were pre-processed (multiplicative scatter correction (MSC), standard normal variate (SNV), Savitsky-Golay smoothing and their combinations) and classified using partial least square discriminant analysis (PLS-DA) and k-nearest neighbour (k-NN). PLS model was also developed to predict the concentration of aflatoxin-B1in naturally contaminated maize kernels inoculated with Aspergillus flavus. The potential wavelength (508 nm) was selected based on principal component analysis (PCA) loadings to distinguish between sterile and infected maize kernels. PCA score plots revealed a distinct separation of low contaminated samples (25, 40 and 70 ppb) from highly contaminated samples (200, 300 and 500 ppb) without any overlapping of data. The maximum classification accuracy of 94.7% was obtained using PLS-DA with SNV pre-processed data. Across all the combinations of pre-processing and classification models, the best efficiency (98.2%) was exhibited by k-NN model with raw data. The developed PLS model depicted good prediction accuracy ( R CV 2 = 0.820, SECV = 79.425, RPDCV = 2.382) during Venetian-blinds cross-validation. The results of pixel-wise classification (k-NN) and concentration distribution maps (PLS with raw spectra) were quite close to the result obtained by reference method (HPLC analysis) of aflatoxin-B1 detection.

Simulations of a weakly conducting droplet under the influence of an alternating electric field.

We investigate the electrohydrodynamics of an initially spherical droplet under the influence of an external alternating electric field by conducting axisymmetric numerical simulations using a charge-conservative volume-of-fluid based finite volume flow solver. The mean amplitude of shape oscillations of a droplet subjected to an alternating electric field for leaky dielectric fluids is similar to the steady-state deformation under an equivalent root mean squared direct electric field for all possible electrical conductivity ratio (Kr) and permittivity ratio (S) of the droplet to the surrounding fluid. In contrast, our simulations for weakly conducting media show that this equivalence between alternating and direct electric fields does not hold for Kr≠S . Moreover, for a range of parameters, the deformation obtained using the alternating and direct electric fields is qualitatively different, that is, for low Kr and high S , the droplet becomes prolate under alternating electric field but deforms to an oblate shape in the case of the equivalent direct electric field. A parametric study is conducted by varying the time period of the applied alternating electric field, the permittivity and the electrical conductivity ratios. It is observed that while increasing Kr has a negligible effect on the deformation dynamics of the droplet for KrS for both alternating and direct electric fields. We believe that our results may be of immense consequence in explaining the morphological evolution of droplets in a plethora of scenarios ranging from nature to biology.

Free-Standing Graphene Oxide and Carbon Nanotube Hybrid Papers with Enhanced Electrical and Mechanical Performance and Their Synergy in Polymer Laminates.

Hybrid nanomaterials fabricated by the heterogeneous integration of 1D (carbon nanotubes) and 2D (graphene oxide) nanomaterials showed synergy in electrical and mechanical properties. Here, we reported the infiltration of carboxylic functionalized single-walled carbon nanotubes (C-SWNT) into free-standing graphene oxide (GO) paper for better electrical and mechanical properties than native GO. The stacking arrangement of GO sheets and its alteration in the presence of C-SWNT were comprehensively explored through scanning electron microscopy, X-ray photoelectron spectroscopy (XPS) and X-ray diffraction. The C-SWNTs bridges between different GO sheets produce a pathway for the flow of electrical charges and provide a tougher hybrid system. The nanoscopic surface potential map reveals a higher work function of the individual functionalised SWNTs than surrounded GO sheets showing efficient charge exchange. We observed the enhanced conductivity up to 50 times and capacitance up to 3.5 times of the hybrid structure than the GO-paper. The laminate of polystyrene composites provided higher elastic modulus and mechanical strength when hybrid paper is used, thus paving the way for the exploitation of hybrid filler formulation in designing polymer composites.

Potential Inhibitors for SARS-CoV-2 and Functional Food Components as Nutritional Supplement for COVID-19: A Review.

The severe acute respiratory syndrome is a viral respiratory infection and commonly called as COVID-19, caused by severe acute respiratory syndrome coronavirus-2 (SARS-CoV-2). It widely transmitted through direct or indirect contact. Currently, no specific treatment against SARS-CoV-2 are available; only prevention and supportive strategy are the preventive measures. The present review emphasizes the latest research related to COVID-19 and SARS-CoV-2 virus as well as the current status of potential inhibitors identified. Recent interest in SARS-CoV-2 has focused on transmission, symptoms, structure, and its structural proteins that exhibit promising therapeutics targets for rapid identification of potential inhibitors. The quick identification of potential inhibitors and immune-boosting functional food ingredients are crucial to combat this pandemic disease. We also tried to give an overview of the functional food components as a nutritional supplement, which helps in boosting our immune system and could be useful in preventing the COVID-19 and/or to improve the outcome during therapy.

The dynamics of rising oil-coated bubbles: experiments and simulations.

Air bubbles rising through an aqueous medium have been studied extensively and are routinely used for the separation of particulates via froth flotation, a key step in many industrial processes. Oil-coated bubbles can be more effective for separating hydrophilic particles with low affinity for the air-water interface, but the rise dynamics of oil-coated bubbles has not yet been explored. In the present work, we report the first systematic study of the shape and rise trajectory of bubbles engulfed in a layer of oil. Results from direct observation of the coated bubbles with a high-speed camera are compared to computer simulations and confirm a pronounced effect of the oil coat on the bubble dynamics. We consistently find that the oil-coated bubbles display a more spherical shape and straighter trajectory, yet slower rise than uncoated bubbles of comparable size. These characteristics may provide practical benefits for flotation separations with oil-coated bubbles.

Effect of composition and storage time on some physico-chemical and rheological properties of probiotic soy-cheese spread.

Probiotic soy-cheese spread was prepared by fermenting soymilk with specific probiotic starter culture, and there after processing the coagulated mass. Soy cheese spread samples had more than 109 cfu/g of viable probiotic count at the time of preparation; and had around 17.6% protein, 25.3% fat and 19.8% total soluble sugar. Compared to commercially available dairy cheese spread, probiotic soy cheese spread had significantly higher protein and anti-oxidant activity. Soy cheese spreads, prepared from pure soymilk as well as by mixing with dairy milk, were studied with respect to the differences in their rheological behavior during storage at refrigerated conditions. A dynamic oscillatory test was used to measure the viscoelastic properties of spreads at 0, 7, 14, 21 and 28 days of storage. It was observed that the storage modulus (G') was higher than the loss modulus (G″) throughout the storage period indicating that the soy cheese spreads exhibit predominantly elastic behavior. The cheese spread sample prepared by adding okara in soymilk had the highest values of G' and complex viscosity (1120 Pa and 11.5 Pa s, respectively at an angular frequency of 100 s-1). G', G″ and viscosity of cheese spread did not change significantly up to 14 days, with values of 650, 225 Pa and 7.43 Pa s, respectively for the sample prepared from soymilk alone. However, these values increased thereafter which might be an indication of structural changes in the cheese spread samples.

Graphene as Barrier to Prevent Volume Increment of Air Bubbles over Silicone Polymer in Aqueous Environment.

The interaction of air bubbles with surfaces immersed in water is of fundamental importance in many fields of application ranging from energy to biology. However, many aspects of this topic such as the stability of surfaces in contact with bubbles remain unexplored. For this reason, in this work, we investigate the interaction of air bubbles with different kinds of dispersive surfaces immersed in water. The surfaces studied were polydimethylsiloxane (PDMS), graphite, and single layer graphene/PDMS composite. X-ray photoelectron spectroscopy (XPS) analysis allows determining the elemental surface composition, while Raman spectroscopy was used to assess the effectiveness of graphene monolayer transfer on PDMS. Atomic force microscopy (AFM) was used to study the surface modification of samples immersed in water. The surface wettability has been investigated by contact angle measurements, and the stability of the gas bubbles was determined by captive contact angle (CCA) measurements. CCA measurements show that the air bubble on graphite surface exhibits a stable behavior while, surprisingly, the volume of the air bubble on PDMS increases as a function of immersion time (bubble dynamic evolution). Indeed, the air bubble volume on the PDMS rises by increasing immersion time in water. The experimental results indicate that the dynamic evolution of air bubble in contact with PDMS is related to the rearrangement of surface polymer chains via the migration of the polar groups. On the contrary, when a graphene monolayer is present on PDMS, it acts as an absolute barrier suppressing the dynamic evolution of the bubble and preserving the optical transparency of PDMS.

Comparing the effects of three local anaesthetic agents on cardiac conduction system - A randomised study.

Background and Aims: This study aimed to compare the effects of three local anaesthetic (LA) agents, namely bupivacaine, levobupivacaine, and ropivacaine, on the cardiac conduction system as assessed by corrected QT (QTc) and P wave dispersion (PWD) intervals in lower limb orthopaedic surgeries and to find the most suitable LA agent that can be used for a long duration. Methods: The study included 75 patients with American Society of Anesthesiologists physical status I and II of either gender in the age group of 18-65 years undergoing elective lower limb orthopaedic surgeries under epidural anaesthesia. These were allocated to groups B (bupivacaine), L (levobupivacaine), and R (ropivacaine). We observed blood pressure, heart rate, respiratory rate, PWD, and QTc intervals from baseline value through Holter monitoring, pain assessment by visual analogue scale, and demand and total volume of LA consumed by patient-controlled analgesia devices. The repeated measures of ANOVA were carried out to find the effect of time and time-to-group interaction among the groups across the periods. Results: On intergroup comparison of QTc and PWD, no significant difference among groups was observed, but on intragroup analysis, a statistically significant increase in QTc and PWD from baseline was observed for each of groups B, L, and R at all time intervals. However, the mean increase in QTc and PWD recorded for Group B was higher than in groups L and R. Conclusions: Bupivacaine has the maximal tendency to prolong QTc and PWD. All three agents showed comparable haemodynamic effects and time to onset of sensory and motor blockade.

Impact of LAB Fermentation on the Nutrient Content, Amino Acid Profile, and Estimated Glycemic Index of Sorghum, Pearl Millet, and Kodo Millet.

INTRODUCTION: Millets, owing to their rich nutritional and low-to-moderate glycemic index values, are termed superfoods; however, some anti-nutritional factors, such as tannins, limit the absorption of micro and macronutrients. Non-thermal processing technologies, such as fermentation, can improve nutrient content and reduce these anti-nutritional factors. METHODS: The effect of a controlled submerged fermentation of whole grain sorghum, pearl millet, and dehusked Kodo millet using mixed lactic acid bacteria (LAB) culture in tofu whey-based media on the proximate, antioxidant, tannin content, vitamin B, amino acids profile and estimated glycemic index (eGI) of different millets were evaluated. RESULTS: The protein content (2-12.5%), carbohydrate content (2-13.6%), antioxidant activity (3-49%), vitamin B complex, amino acid profile (89-90%), and eGI of whole grain sorghum, pearl millet, and dehusked Kodo millet improved due to LAB-assisted submerged fermentation. In contrast, fat (4-15%), ash (56-67%), crude fiber (5-34%), minerals, tannin and resistant starch content decreased due to LAB fermentation. CONCLUSION: Controlled LAB fermentation can improve the nutritional quality of sorghum and millets while reducing anti-nutritional factors. This non-thermal process can be adopted industrially to produce more palatable and nutritionally superior millet products.

Investigation of Drought Stress on Chickpea (Cicer arietinum L.) Genotypes Employing Various Physiological Enzymatic and Non-Enzymatic Biochemical Parameters.

Drought stress is a universal crisis in sustaining the growth and production of major legumes, including the chickpea. Drought severely reduces the biomass of chickpea plants, with the effect on leaves appearing the most apparent. The aim of this study was to investigate, using various physiological and biochemical markers throughout the pod filling stage, how 78 desi chickpea genotypes tolerated drought stress. Most of the evaluated characteristics showed significant variations between control and drought treatments. The mean performance of most of the investigated parameters significantly decreased under moisture-stressed conditions. RWC, SWD, MSI, and CTD were investigated under terminal drought-stressed conditions. Except for saturated water deficit (SWD), all remaining characteristics declined with increasing stress. Genotypes SAGL152210, SAGL152252, SAGL152347, SAGL22-115, and JG11 were recognized as drought-tolerant based on physiological characteristics. Biochemical markers viz., protein content, total soluble sugar, lipid peroxidation, and proline content, had an impact on osmotic adjustment. Based on non-enzymatic biochemical traits, genotypes SAGL22-115, ICC4958, ICCV201108, ICCV201107, SAGL152252, and JG11 were identified for their capability to survive under drought-stressed conditions. H2O2 content, CAT, SOD, POD, APX, and DPPH were considered antioxidant agents. Genotypes SAGL152208, SAGL22-105, SAGL22-112, ICC201108, SAGL152278, SAGL152252, SAGL162371, SAGL162390, ICC 4958, and JG315 may be considered drought-tolerant based on antioxidant activities. These genotypes are believed to be better equipped with physio-biochemical mechanisms and antioxidant defense systems at the cellular level and can be used in breeding programs to breed drought-tolerant cultivar(s). They can also be screened in the future, allowing the line(s) that have remained consistent over time to be recognized and registered as drought-tolerant donors.

Texture-Induced Strain in a WS2 Single Layer to Monitor Spin-Valley Polarization.

Nanoscale-engineered surfaces induce regulated strain in atomic layers of 2D materials that could be useful for unprecedented photonics applications and for storing and processing quantum information. Nevertheless, these strained structures need to be investigated extensively. Here, we present texture-induced strain distribution in single-layer WS2 (1L-WS2) transferred over Si/SiO2 (285 nm) substrate. The detailed nanoscale landscapes and their optical detection are carried out through Atomic Force Microscopy, Scanning Electron Microscopy, and optical spectroscopy. Remarkable differences have been observed in the WS2 sheet localized in the confined well and at the periphery of the cylindrical geometry of the capped engineered surface. Raman spectroscopy independently maps the whole landscape of the samples, and temperature-dependent helicity-resolved photoluminescence (PL) experiments (off-resonance excitation) show that suspended areas sustain circular polarization from 150 K up to 300 K, in contrast to supported (on un-patterned area of Si/SiO2) and strained 1L-WS2. Our study highlights the impact of the dielectric environment on the optical properties of two-dimensional (2D) materials, providing valuable insights into the selection of appropriate substrates for implementing atomically thin materials in advanced optoelectronic devices.

Strain distribution in WS2 monolayers detected through polarization-resolved second harmonic generation.

Two-dimensional (2D) graphene and graphene-related materials (GRMs) show great promise for future electronic devices. GRMs exhibit distinct properties under the influence of the substrate that serves as support through uneven compression/ elongation of GRMs surface atoms. Strain in GRM monolayers is the most common feature that alters the interatomic distances and band structure, providing a new degree of freedom that allows regulation of their electronic properties and introducing the field of straintronics. Having an all-optical and minimally invasive detection tool that rapidly probes strain in large areas of GRM monolayers, would be of great importance in the research and development of novel 2D devices. Here, we use Polarization-resolved Second Harmonic Generation (P-SHG) optical imaging to identify strain distribution, induced in a single layer of WS2 placed on a pre-patterned Si/SiO2 substrate with cylindrical wells. By fitting the P-SHG data pixel-by-pixel, we produce spatially resolved images of the crystal armchair direction. In regions where the WS2 monolayer conforms to the pattern topography, a distinct cross-shaped pattern is evident in the armchair image owing to strain. The presence of strain in these regions is independently confirmed using a combination of atomic force microscopy and Raman mapping.