Optimization of process parameters of refractance window drying for aonla slices and comparison with other drying techniques.

BACKROUND: Aonla is as a good source of antioxidants due to its high ascorbic acid and polyphenol contents. However, because of its high acidity and astringent taste, aonla is rarely consumed in its fresh form. As the constituents in aonla are heat sensitive, it is essential to find a suitable drying method for preservation. Therefore, refractance window drying (RWD) of aonla slices was studied as it has the potential of retaining heat-sensitive compounds. RESULTS: The effect of RWD process variables, namely water temperature (75, 82.5, 90 °C) and slice thickness (2, 4, 6 mm), on different quality parameters of dehydrated aonla was studied. Increasing water temperature resulted in significantly higher ascorbic acid content, titratable acidity and product temperature, while total phenolic content, free radical scavenging activity and moisture content decreased. With the exception of product temperature, higher slice thickness led to an increase in the values of all the parameters. At the optimized processing conditions of 83 °C water temperature and 4 mm slice thickness, the ascorbic acid content, total phenolic content, free radical scavenging activity, titratable acidity and moisture content values were found to be 269.03 mg (100 g)-1, 242.33 mg (100 g)-1, 87.11%, 3.62% and 4% respectively. The aonla slices subjected to RWD also possessed 4-6% higher phytochemical content than osmotically dried and hot-air-dried samples. CONCLUSION: This research highlights the effectiveness of RWD in preserving heat-sensitive compounds in food like aonla. The RW-dried slices had a smoother and more uniform microstructure compared to osmotically dried and hot-air-dried samples. © 2024 Society of Chemical Industry.

α-Amylase inhibitory, antioxidant and emulsification potential of glycoproteinaceous bioactive molecule from Lactobacillus delbrueckii.

The bioactive components of microbial origin have been extensively applied to restrict the enormous enzyme-catalyzed processes. Hence, the present study was executed to explore the α -amylase inhibition (AAI) potential of glycoprotein isolated from Lactobacillus delbrueckii (LGp) to regulate in vitro starch hydrolysis. As a non-competitive inhibitor, the protein exhibited AAI (85%) with, IC50 135 ± 0.55 µg/mL. It was stable over a broad range of pH (3-11) and temperature (25-75 °C). Furthermore, LGp was significantly effective against amylase and starch from different sources. In addition, it also exhibited antioxidant and emulsifying potential. The UV, FT-IR and fluorescence analysis affirm the alterations in amylase molecular conformation after interaction with the LGp inhibitor. These results provide a substantial basis for the future use of LGp for controlled starch hydrolysis in vitro and as an antioxidant and emulsifying agent in the food industry.

Development and evaluation of a vacuum impregnation system for enhancement of biochemical properties of food materials.

Vacuum impregnation is a novel methodology for adding various substances to porous foods. This study aimed to develop a cost effective automate system for vacuum impregnation of food materials to enhance their nutritional, functional and sensory properties depending on the functionality of the impregnation solution. The developed vacuum impregnation system includes a vacuum chamber, vacuum pump and an automation setup for creating and maintaining vacuum conditions, feeding impregnated solutions to the samples and releasing vacuum. Fresh-cut spinach leaves were impregnated with ascorbic acid (AsA) and calcium chloride (Cacl2) (10% concentration) in the setup in order to test the effect of the process on some biochemical properties. Statistical analysis revealed significant effect of vacuum impregnation on the biochemical properties (total soluble solids, total phenolic content, flavonoid content and free radical scavenging activity) and color of spinach leaves during storage up to 4 days. Impregnation process showed significant increase in the total phenolic and flavonoid content of the spinach leaves. Increment up to 78% in antioxidant activity was seen for the uncoated impregnated leaves as compared to 59% activity in untreated samples. Thus, products with desired parameters can be produced with this process with minimal impact on their properties at a lower cost and in a shorter time period.

Impact of LAB Fermentation on the Nutrient Content, Amino Acid Profile, and Estimated Glycemic Index of Sorghum, Pearl Millet, and Kodo Millet.

INTRODUCTION: Millets, owing to their rich nutritional and low-to-moderate glycemic index values, are termed superfoods; however, some anti-nutritional factors, such as tannins, limit the absorption of micro and macronutrients. Non-thermal processing technologies, such as fermentation, can improve nutrient content and reduce these anti-nutritional factors. METHODS: The effect of a controlled submerged fermentation of whole grain sorghum, pearl millet, and dehusked Kodo millet using mixed lactic acid bacteria (LAB) culture in tofu whey-based media on the proximate, antioxidant, tannin content, vitamin B, amino acids profile and estimated glycemic index (eGI) of different millets were evaluated. RESULTS: The protein content (2-12.5%), carbohydrate content (2-13.6%), antioxidant activity (3-49%), vitamin B complex, amino acid profile (89-90%), and eGI of whole grain sorghum, pearl millet, and dehusked Kodo millet improved due to LAB-assisted submerged fermentation. In contrast, fat (4-15%), ash (56-67%), crude fiber (5-34%), minerals, tannin and resistant starch content decreased due to LAB fermentation. CONCLUSION: Controlled LAB fermentation can improve the nutritional quality of sorghum and millets while reducing anti-nutritional factors. This non-thermal process can be adopted industrially to produce more palatable and nutritionally superior millet products.

Bubble ascent and rupture in mud volcanoes.

Large gas bubbles can reach the surface of pools of mud and lava where they burst, often through the formation and expansion of circular holes. Bursting bubbles release volatiles and generate spatter, and hence play a key role in volcanic degassing and volcanic edifice construction. Here, we study the ascent and rupture of bubbles using a combination of field observations at Pâclele Mici (Romania), laboratory experiments with mud from the Imperial Valley (California, USA), numerical simulations and theoretical models. Numerical simulations predict that bubbles ascend through the mud as elliptical caps that develop a dimple at the apex as they impinge on the free surface. We documented the rupture of bubbles in nature and under laboratory conditions using high-speed video. The bursting of mud bubbles starts with the nucleation of multiple holes, which form at a near-constant rate and in quick succession. The quasi-circular holes rapidly grow and coalesce, and the sheet evolves towards a filamentous structure that finally falls back into the mud pool, sometimes breaking up into droplets. The rate of expansion of holes in the sheet can be explained by a generalization of the Taylor-Culick theory, which is shown to hold independent of the fluid rheology.