RESUMO
Sulforhodamine B (SRB) is widely utilized for cell staining and laser field. But its application is limited by aggregation-caused quenching (ACQ). In this work, we evaluated the use of UiO-66 and UiO-67 of Zr-based metal organic frameworks (Zr-MOFs) as the host to adsorb SRB molecules due to the high stabily and good loading capacity of Zr-MOFs. The fluorescence properties of the compounds were then discussed respectively. Due to the aperture difference between UiO-66 and UiO-67, they showed distinct fluorescence properties after loading SRB. When the concentration reaches 5 ppm, fluorescence quenching begins to occur in SRB@UiO-66, while it occurs in SRB@UiO-67 at 2 ppm. The solution of quenching phenomenon could open new avenues for the extensive use of SRB.
RESUMO
As a subseries of the covalent organic framework (COF) material family, polyimide-based covalent organic framework (PI-COF) material, which has the advantages of high stability of polyimide, high specific surface area, and controllable pores of COF material, is expected to be a new type of porous material with potential applications. Although the development of PI-COF is in the early stages during the past decade, it has attracted extensive attention and is widely used in heterogeneous catalysis, gas separation, and storage fields. Therefore, this review is aiming to give a comprehensive understanding of the recent progress of PI-COFs. This article summarizes the progress of PI-COF from three aspects: controllable structure design, synthesis method, and application. First of all, under the guidance of network chemical design principles, the topology type of PI-COF and the size and shape of the formed pores are summarized in terms of different organic monomers. Then the five synthetic strategies for the synthesis of PI-COF are analyzed. Finally, the applications of PI-COF in adsorption and separation, drug delivery, solar-to-electrochemical energy storage, photocatalysis, and electrocatalyst are introduced.
Assuntos
Estruturas Metalorgânicas , Adsorção , Catálise , Sistemas de Liberação de Medicamentos , PorosidadeRESUMO
Poly(butylene adipate-co-terephthalate) (PBAT), a polyester made of terephthalic acid (TPA), 1,4-butanediol, and adipic acid, is extensively utilized in plastic production and has accumulated globally as environmental waste. Biodegradation is an attractive strategy to manage PBAT, but an effective PBAT-degrading enzyme is required. Here, we demonstrate that cutinases are highly potent enzymes that can completely decompose PBAT films in 48 h. We further show that the engineered cutinases, by applying a double mutation strategy to render a more flexible substrate-binding pocket exhibit higher decomposition rates. Notably, these variants produce TPA as a major end-product, which is beneficial feature for the future recycling economy. The crystal structures of wild type and double mutation of a cutinase from Thermobifida fusca in complex with a substrate analogue are also solved, elucidating their substrate-binding modes. These structural and biochemical analyses enable us to propose the mechanism of cutinase-mediated PBAT degradation.
Assuntos
Adipatos , Poliésteres , Poliésteres/metabolismoRESUMO
Polypropylene has been used for applications requiring high mechanical properties, good adhesion, chemical stability and insulation. Whereas, Polypropylene itself is flammable, and its limiting oxygen index (LOI) is low, which cannot pass the UL-94 combustion test. Therefore, extensive use will cause a serious threat to human life and property. With the wide application of thermoplastic polypropylene in industry, the development of environmentally friendly flame retardant materials has become an important research direction. For the past dozen years, researchers have been exploring flame retardants with high flame retardant efficiency, low toxicity, less smoke or other excellent performance flame retardants. This paper reviews the research progress of some phosphorus-containing flame retardants on the flame retardant properties of polypropylene in recent years. Phosphorus flame retardant is a flame retardant with high flame retardant efficiency, good stability and wide application. The types and flame retardant properties of phosphorus flame retardant will be introduced, and the future research of phosphorus flame retardant is summarized, direction and development opportunities.
RESUMO
The mechanical properties of artificial skins are complicated to maintain under ensuring air permeability and antimicrobial. Thus, a series of hydrophilic antimicrobial polymer networks are prepared by crosslinking chitosan and polyvinyl alcohol with the lauramidopropyl betaine and hydrogen bond organic framework (CS/PVA/LPB/2D-HOF). The mechanical performance of the control groups and the complex are systematically evaluated to attain an artificial strength skin. The CS/PVA/LPB/2D-HOF complex exhibits strong mechanical abilities than other control groups. By analyzing the IR spectra and the morphology, the synergistic effect of hydrogen bonds between molecules and cracks significantly improves the mechanical properties of the complex. Its maximum tensile strength can reach 29 MPa, and its maximum load capacity can reach 3700 g. Notably, the composite membrane also performs an excellent antimicrobial activity. In vivo and in vitro experiments show that the hybrid membrane can promote tissue regeneration and wound healing (95ï¼ ). These results may open up the opportunity for future composite material investigations in the artificial skin and tissue engineering field.
Assuntos
Anti-Infecciosos/química , Betaína/química , Quitosana/química , Membranas Artificiais , Álcool de Polivinil/química , Pele Artificial , Cicatrização , Animais , Linhagem Celular , Feminino , Ligação de Hidrogênio , Camundongos , Camundongos Endogâmicos BALB C , Resistência à TraçãoRESUMO
In the course of time, significant amounts of heavy-ion pollutants have been dispersed into the environment. Rapid on-site detection of heavy metal ions is crucial to monitor their dispersion in the nascent stages. In this study, 2.2-µm-diameter polystyrene microspheres (PSM) were synthesized via emulsifier-free polymerization to coat polyacrylonitrile (PSM@PAN) and form core/shell-structured microspheres. Core/shell polystyrene/polyvinyltetrazole (PSM@PVT) microspheres were obtained after a cyano-to-tetrazole conversion reaction, loaded in an electrorheological device (ERD) display constructed using two indium tin oxide glasses with a spacer seal. The ERD loading dispersed the microsphere solution by scattering light through the ERD, resulting in a low transmittance in the absence of an alternating electric field (AEF). Particles in the fluid medium were polarized to induce negative and positive charges at each end of the particles under the AEF, and the resultant particle chains enhanced transmittance. The optimal frequency to generate the highest degree of particle chaining in the presence of an AEF is defined as its characteristic frequency (Fc), which also serves as an indicator to identify the shell materials. The Fc of PSM@PVT shifted from 350 kHz to 30 kHz after adsorbing Cr(VI) from the PVT coating. Transmittance of the ERD loading of PSM@PVT with Cr(VI) increased linearly with the concentration of Cr(VI). Approximately 40 ng mL-1 of the limit of detection was calculated in the linear range of 10-540 ng mL-1. The Fc of the PSM@PVT adsorbing the Cr(VI) was not influenced by Na(I), K(I), Ca(II), Mg(II), Fe(III), and Zn(II) coexisting in the ERD.
RESUMO
Polystyrene nanospheres (PNs) were embedded in bovine skin gelatin gels with a poly(N-isopropylacrylamide) (PNIPAAm) network, which were denoted as NGHHs, to generate thermoresponsive behavior. When 265 nm PNs were exploited to generate the pores, bovine skin gelatin extended to completely occupy the pores left by PNs below the lower critical solution temperature (LCST), forming a pore-less structure. Contrarily, above the LCST, the collapse of hydrogen bonding between bovine skin gelatin and PNIPAAm occurred, resulting in pores in the NGHH. The behavior of pore closing and opening below and above the LCST, respectively, indicates the excellent drug gating efficiency. Amoxicillin (AMX) was loaded into the NGHHs as smart antibiotic gating due to the pore closing and opening behavior. Accordingly, E. coli. and S. aureus were exploited to test the bacteria inhibition ratio (BIR) of the AMX-loaded NGHHs. BIRs of NGHH without pores were 48% to 46.7% at 25 and 37 °C, respectively, for E. coli during 12 h of incubation time. The BIRs of nanoporous NGHH could be enhanced from 61.5% to 90.4% providing a smart antibiotic gate of bovine skin gelatin gels against inflammation from infection or injury inflammation.
RESUMO
The fluorescent dye molecules have gained wide attention for their applications in areas such as imaging and sensor. However, the properties of the fluorescent dyes are limited due to the built-in problems such as the aggregation-caused quenching (ACQ). Herein, a fluorescent dye@MOF was developed by encapsulating fluorescent dye molecules into the channels of metal-organic frameworks (MOFs) to disperse them. This composite material SRB@UiO-66, equipping appreciable stability, was successfully obtained with sulfonyl rhodamine B (SRB) integrated into UiO-66. The composite material overtly accelerated the fluorescence property of SRB due to the limitation of nanometer channels on SRB, while UiO-66 has some fluorescence properties. Besides, SRB@UiO-66 with dual emission centers can be utilized as ratiometric sensors for Fe3+ detection in aqueous solution owing to their high sensitivity and selectivity. SRB@UiO-66 shows a new possibility to fabricate fluorescent molecular probes for the determination of heavy metal ions.
RESUMO
The binary blend materials containing the modified recycled rubber powder with maleic a hydride modified polypropylene thermoplastic elastomer were prepared by dynamic vulcanization and blended with a variety of additives such as activated agent, accelerator, solubilizer, and the crosslinking agent. The thermal properties and mechanical properties including tensile strengths and impact strengths of pristine rubber, polypropylene and their corresponding binary blends were investigated. Besides, the effects of the amount of rubber powder, polypropylene, crosslinking agent, accelerator, activator, and solvent were studied and the microstructures of the pristine rubber, pristine polypropylene, and their corresponding binary blends were observed by scanning electron microscopy. It was found that the compatibilizer could effectively disperse the size of 120 mesh of recycled rubber powder into the polypropylene in the same manner and the homogeneous tear section of the rubber/polypropylene thermoplastic elastomer was obtained. The results on the effects of additives on mechanical and morphological properties of recycled rubber/polypropylene binary blends guide the rational design of novel polymeric composites from recycled polymeric materials.
RESUMO
To afford an intact double network (sample abbr.: DN) hydrogel, two-step crosslinking reactions of poly(2-acrylamido-2-methylpropanesulfonic acid) (i.e., PAMPS first network) and then poly(acrylic acid) (i.e., PAA second network) were conducted both in the presence of crosslinker (N,N'-methylenebisacrylamide (MBAA)). Similar to the two-step processes, different contents of 2,2,6,6-tetramethyl-1-piperidinyloxy (TEMPO) oxidized cellulose nanofibers (TOCN: 1, 2, and 3 wt.%) were initially dispersed in the first network solutions and then crosslinked. The TOCN-containing PAMPS first networks subsequently soaked in AA and crosslinker and conducted the second network crosslinking reactions (TOCN was then abbreviated as T for DN samples). As the third step, various (T-)DN hydrogels were then treated with different concentrations of FeCl3(aq) solutions (5, 50, 100, and 200 mM). Through incorporations of ferric ions into (T-)DN hydrogels, notably, three purposes are targeted: (i) strengthen the (T-)DN hydrogels through ionic bonding, (ii) significantly render ionic conductivity of hydrogels, and (iii) serve as a catalyst for the forth step to proceed with in situ chemical oxidative polymerizations of pyrroles to afford polypyrrole-containing (sample abbr.: Py) hydrogels [i.e., (T-)Py-DN samples]. The characteristic functional groups of PAMPS, PAA, and Py were confirmed by FT-IR. Uniform microstructures were observed by cryo scanning electron microscopy (cryo-SEM). These results indicated that homogeneous composites of T-Py-DN hydrogels were obtained through the four-step process. All dry samples showed similar thermal degradation behaviors from the thermogravimetric analysis (TGA). The T2-Py5-DN sample (i.e., containing 2 wt.% TOCN with 5 mM FeCl3(aq) treatment) showed the best tensile strength and strain at breaking properties (i.e., σTb = 450 kPa and εTb = 106%). With the same compositions, a high conductivity of 3.34 × 10-3 S/cm was acquired. The tough T2-Py5-DN hydrogel displayed good conductive reversibility during several "stretching-and-releasing" cycles of 50-100-0%, demonstrating a promising candidate for bioelectronic or biomaterial applications.
RESUMO
In this study, we enhanced the toughness of epoxy resin by blending it with the diblock copolymer poly(ethylene oxideâ»bâ»Îµ-caprolactone) (PEO-b-PCL) with a benzoxazine monomer (PA-OH) as the thermal curing agent. After thermal curing, Fourier transform infrared spectroscopy revealed that intermolecular hydrogen bonding existed between the OH units of the epoxyâ»benzoxazine copolymer and the Câ»Oâ»C (C=O) units of the PEO (PCL) segment. Differential scanning calorimetry and dynamic mechanical analysis revealed that the glass transition temperature and storage modulus of the epoxyâ»benzoxazine matrix decreased significantly upon increasing the concentration of PEO-b-PCL. The Kwei equation predicted a positive value of q, consistent with intermolecular hydrogen bonding in this epoxyâ»benzoxazine/PEO-b-PCL blend system. Scanning electron microscopy revealed a wormlike structure with a high aspect ratio for PEO-b-PCL as the dispersed phase in the epoxyâ»benzoxazine matrix; this structure was responsible for the improved toughness.
RESUMO
Co3O4 nanostructures have been extensively studied as anode materials for rechargeable lithium-ion batteries (LIBs) because of their stability and high energy density. However, several drawbacks including low electrical transport and severe volume changes over a long period of operation have limited their utilities in LIBs. Rational composite design is becoming an attractive strategy to improve the performance and stability of potential lithium-ion-battery anode materials. Here, a simple method for synthesizing hollow Co3O4@TiO2 nanostructures using metal-organic frameworks as sacrificial templates is reported. Being used as an anode material for LIBs, the resulting composite exhibits remarkable cycling performance (1057 mAh g-1 at 100 mA g-1 after 100 cycles) and good rate performance. The optimized amorphous Co3O4@TiO2 hollow dodecahedron shows a significant improvement in electrochemical performance and shows a wide prospect as an advanced anode material for LIBs in the future.
RESUMO
In this study, we investigated the influence of methacryl-functionalized polyhedral oligomeric silsesquioxane (MA-POSS) nanoparticles as a plasticizer and thermal stabilizer for a poly(vinyl chloride) (PVC) homopolymer and for a poly(vinyl chloride)/dissononyl cyclohexane-1,2-dicarboxylate (PVC/DINCH) binary blend system. The PVC and the PVC/DINCH blend both became flexible, with decreases in their glass transition temperatures and increases in their thermal decomposition temperatures, upon an increase in MA-POSS content, the result of hydrogen bonding between the C=O groups of MA-POSS and the H-CCl units of the PVC, as determined using infrared spectroscopy. Furthermore, the first thermal decomposition temperature of the pure PVC, due to the emission of HCl, increased from 290 to 306 °C, that is, the MA-POSS nanoparticles had a retarding effect on the decomposition of the PVC matrix. In tensile tests, all the PVC/DINCH/MA-POSS ternary blends were transparent and displayed flexibility, but their modulus and tensile strength both decreased, while their elongation properties increased, upon an increase in MA-POSS concentration, both before and after thermal annealing. In contrast, the elongation decreased, but the modulus and tensile strength increased, after thermal annealing at 100 °C for 7 days.
RESUMO
An effective method of oxidation from paper pulps via 2,2,6,6-tetramethylpiperidine-1-oxy (TEMPO) compound to obtain TEMPO-oxidized cellulose nanofibers (TOCNs) was demonstrated. Following by acylation, TOCN having an atom transfer radical polymerization (ATRP) initiating site of bromoisobutyryl moiety (i.e., TOCN-Br) was successfully obtained. Through a facile and practical technique of surface-initiated initiators for continuous activator regeneration atom transfer radical polymerization (SI ICAR ATRP) of methyl methacrylate (MMA) from TOCN-Br, controllable grafting polymer chain lengths (Mn = ca. 10k-30k g/mol) with low polydispersity (PDI < 1.2) can be achieved to afford TOCN-g-Poly(methyl methacrylate) (PMMA) nanomaterials. These modifications were monitored by Fourier-transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), electron spectroscopy for chemical analysis (ESCA), and water contact angle analysis. Eventually, TOCN-g-PMMA/PMMA composites were prepared using the solvent blending method. Compared to the pristine PMMA (Tg = 100 °C; tensile strength (σT) = 17.1 MPa), the composites possessed high transparency with enhanced thermal properties and high tensile strength (Tg = 110 °C and σT = 37.2 MPa in 1 wt% TOCN containing case) that were investigated by ultraviolet-visible spectroscopy (UV-Vis), thermogravimetric analysis (TGA), dynamic mechanical analysis (DMA), and tensile tests. We demonstrated that minor amounts of TOCN-g-PMMA nanofillers can provide high efficacy in improving the mechanical and thermal properties of PMMA matrix.
RESUMO
A photoelectric conversion efficiency (PCE) of 4.9% was obtained under 100 mW cm-2 illumination by quantum-dot-sensitized solar cells (QDSSCs) using a CdS/Mn : CdSe sensitizer. CdS quantum dots (QDs) were deposited on a TiO2 mesoporous oxide film by successive ionic layer absorption and reaction. Mn2+ doping into CdSe QDs is an innovative and simple method-chemical bath co-deposition, that is, mixing the Mn ion source with CdSe precursor solution for Mn : CdSe QD deposition. Compared with the CdS/CdSe sensitizer without Mn2+ incorporation, the PCE was increased from 3.4% to 4.9%. The effects of Mn2+ doping on the chemical, physical and photovoltaic properties of the QDSSCs were investigated by energy dispersive spectrometry, absorption spectroscopy, photocurrent density-voltage characteristics and electrochemical impedance spectroscopy. Mn-doped CdSe QDs in QDSSCs can obtain superior light absorption, faster electron transport and slower charge recombination than CdSe QDs.
RESUMO
Isostructural zirconium-based metalâ»organic frameworks (Zr-MOFs) have attracted the attention of researchers because of their remarkable stability at high temperatures and high pressures and their chemical stabilities against acids and bases. Due to this stability, Zr-MOFs can be utilized in adsorption research, and the adsorption performance of a Zr-MOF depends on the pore size and the surroundings of the MOF. In this study, as the dimensions changed and the adsorption was carried out, the Zr-MOF material remained stable, and the adsorption of the best state was achieved at 235 mg/g. Through the simulation of theoretical kinetic models of Zr-MOFs, we initially postulated that the adsorption capacity is proportional to the pore size and that acid orange 7 (AO7) was adsorbed by the MOFs. Afterwards, we verified our hypotheses through a series of Brunauerâ»Emmettâ»Teller (BET) data analysis; non-local density function theory (NLDFT) was mainly used to analyze the data. Moreover, we determined that physical adsorption occurs on the surface of the MOFs during the adsorption process, while chemisorption occurs in the form of dye molecules combining with active sites. Ultimately, we concluded that the larger the pore size, the stronger the adsorption capacity, and this contribution casts a new light on the issue of wastewater treatment.
RESUMO
Zirconium based metal organic frameworks (Zr-MOFs) have become popular in engineering studies due to their high mechanical stability, thermostability and chemical stability. In our work, by using a theoretical kinetic adsorption isotherm, we can exert MOFs to an acid dye adsorption process, experimentally exploring the adsorption of MOFs, their external behavior and internal mechanism. The results indicate their spontaneous and endothermic nature, and the maximum adsorption capacity of this material for acid orange 7 (AO7) could be up to 358 mg·g-1 at 318 K, estimated by the Langmuir isotherm model. This is ascribed to the presence of an open active metal site that significantly intensified the adsorption, by majorly increasing the interaction strength with the adsorbates. Additionally, the enhanced π delocalization and suitable pore size of UiO-66 gave rise to the highest host-guest interaction, which further improves both the adsorption capacity and separation selectivity at low concentrations. Furthermore, the stability of UiO-66 was actually verified for the first time, through comparing the structure of the samples before and after adsorption mainly by Powder X-ray diffraction and thermal gravimetric analysis.