RESUMO
Clay minerals are ubiquitous in subsurface environments and have long been recognized as having a limited or negligible impact on the fate of arsenic (As) due to their negatively charged surfaces. Here, we demonstrate the significant role of kaolinite (Kln), a pervasive clay mineral, in enhancing As(V) immobilization during ferrous iron (Fe(II)) oxidation at near-neutral pH. Our results showed that Fe(II) oxidation alone was not capable of immobilizing As(V) at relatively low Fe/As molar ratios (≤2) due to the generation of Fe(III)-As(V) nanocolloids that could still migrate easily as truly dissolved As did. In the presence of kaolinite, dissolved As(V) was significantly immobilized on the kaolinite surfaces via forming Kln-Fe(III)-As(V) ternary precipitates, which had large sizes (at micrometer levels) to reduce the As mobility. The kaolinite-induced heterogeneous pathways for As(V) immobilization involved Fe(II) adsorption, heterogeneous oxidation of adsorbed Fe(II), and finally heterogeneous nucleation/precipitation of Fe(III)-As(V) phases on the edge surfaces of kaolinite. The surface precipitates were mixtures of amorphous basic Fe(III)-arsenate and As-rich hydrous ferric oxide. Our findings provide new insights into the role of clay minerals in As transformation, which is significant for the fate of As in natural and engineered systems.
Assuntos
Arseniatos , Caulim , Oxirredução , Caulim/química , Arseniatos/química , Ferro/química , Compostos Ferrosos/química , AdsorçãoRESUMO
In the context of the circular economy, the development of innovative and low-carbon concrete that incorporates different kinds of waste materials is gaining attention among the research community, regulatory agencies, and policymakers. These materials can be incorporated into concrete mixtures as aggregates or as fillers for improvement of product properties. This study aims to identify reliable designs for biochar-augmented cementitious products and general applications through technical, environmental, and economic assessments. The outcomes demonstrate that 5 wt% biochar addition could enhance the compressive strength of the final products. Using biochar, together with other recycled materials, can enormously reduce the environmental impacts, especially for global warming, enabling biochar-augmented cementitious products and general application as carbon-negative resources. The highest GWP reduction reached -720 kg CO2/tonne, equal to a 200% saving. A high quantity of biochar could be included in several specific applications (up to 60 wt%). The economic assessment highlights that the proposed designs are cost-effective and carbon tax can be significantly reduced. Carbon credits can also be earned for some carbon-negative designs. These findings can serve to mitigate GHG emissions and provide decision-makers with a reliable and holistic framework towards the goal of carbon neutrality.
Assuntos
Carbono , Carvão Vegetal , Análise Custo-Benefício , Aquecimento GlobalRESUMO
Selective and highly efficient extraction technologies for the recovery of critical metals including lithium, nickel, cobalt, and manganese from spent lithium-ion battery (LIB) cathode materials are essential in driving circularity. The tailored deep eutectic solvent (DES) choline chloride-formic acid (ChCl-FA) demonstrated a high selectivity and efficiency in extracting critical metals from mixed cathode materials (LiFePO4:Li(NiCoMn)1/3O2 mass ratio of 1:1) under mild conditions (80 °C, 120 min) with a solid-liquid mass ratio of 1:200. The leaching performance of critical metals could be further enhanced by mechanochemical processing because of particle size reduction, grain refinement, and internal energy storage. Furthermore, mechanochemical reactions effectively inhibited undesirable leaching of nontarget elements (iron and phosphorus), thus promoting the selectivity and leaching efficiency of critical metals. This was achieved through the preoxidation of Fe and the enhanced stability of iron phosphate framework, which significantly increased the separation factor of critical metals to nontarget elements from 56.9 to 1475. The proposed combination of ChCl-FA extraction and the mechanochemical reaction can achieve a highly selective extraction of critical metals from multisource spent LIBs under mild conditions.
Assuntos
Lítio , Reciclagem , Metais , Cobalto , Fontes de Energia Elétrica , FerroRESUMO
Low-carbon and high-efficiency binder is desirable for sustainable treatment of municipal solid waste incineration fly ash (MSWI FA). In this study, CaO or MgO was used to activate ground granulated blast furnace slag (GGBS) to form calcium silicate hydrate and magnesium silica hydrate gel for stabilization/solidification of hazardous MSWI FA. Experimental results showed that potential toxic elements (PTEs), such as Pb and Zn, significantly inhibited the formation of reaction products in CaO-GGBS system due to the complexation between Ca(OH)2 and PTEs, whereas PTEs only had insignificant inhibition on transformation from MgO to Mg(OH)2 in MgO-GGBS system, resulting in lower leachabilities of PTEs and higher mechanical strengths. Stabilization/solidification experiments demonstrated that MSWI FA (70 wt%) could be recycled by MgO-GGBS binder (30 wt%) into blocks with desirable 28-day compressive strengths (3.9 MPa) and PTEs immobilization efficiencies (99.8% for Zn and 99.7% for Pb). This work provides mechanistic insights on the immobilization mechanisms of PTEs in CaO/MgO-GGBS systems and suggests a promising MgO-GGBS binder for low-carbon treatment of MSWI FA.
Assuntos
Metais Pesados , Eliminação de Resíduos , Cinza de Carvão , Eliminação de Resíduos/métodos , Material Particulado , Carbono , Óxido de Magnésio , Chumbo , Metais Pesados/análise , Incineração/métodos , Resíduos Sólidos/análiseRESUMO
Electroplating sludge is a hazardous waste due to its high potential to leach toxic elements into the natural environment. To alleviate this issue, we tailored magnesium phosphate cement (MPC) as a low-carbon material for stabilization/solidification (S/S) of Zn-rich electroplating sludge. The interaction between MPC and ZnO was investigated to clarify the precipitate chemistry, microstructure transition, and chemical environment of Zn species in the MPC-treated Zn sludge system. Comprehensive characterization (by X-ray diffraction (XRD), 31P nuclear magnetic resonance (NMR), and extended X-ray absorption fine structure spectroscopy (EXAFS)) and thermodynamic modeling results revealed that the incorporated ZnO preferentially reacted with phosphate to form Zn3(PO4)2·2H2O/Zn3(PO4)2·4H2O, changing the orthophosphate environment in the MPC system. Stronger chemical bonding between Zn and phosphate in comparison to the bonding between Mg and phosphate also resulted in the formation of amorphous Zn3(PO4)2·2H2O/Zn3(PO4)2·4H2O. Zn3(PO4)2·4H2O precipitate appears to predominate at high {K+}{H+}{HPO42-} values, and the formation of Zn3(PO4)2·2H2O/Zn3(PO4)2·4H2O competed for the Mg sites in the MPC system, leading to the inhibition of formation of Mg-phosphate precipitates. Overall, this work uncovers the precipitate chemistry and microstructure transition of Zn species in the MPC system, providing new insights into the sustainable S/S of Zn-contaminated wastes by adopting MPC.
Assuntos
Metais Pesados , Óxido de Zinco , Galvanoplastia , Compostos de Magnésio , Metais Pesados/química , Fosfatos/química , Esgotos/química , Zinco/químicaRESUMO
Electron transfer mediated by iron minerals is considered as a critical redox step for the dynamics of pollutants in soil. Herein, we explored the reduction process of Cr(VI) with different crystalline ferric oxyhydroxides in the presence of pyrogenic carbon (biochar). Both low- and high-crystallinity ferric oxyhydroxides induced Cr(VI) immobilization mainly via the sorption process, with a limited reduction process. However, the Cr(VI) reduction immobilization was inspired by the copresence of biochar. Low-crystallinity ferric oxyhydroxide had an intense chemical combination with biochar and strong sorption for Cr(VI) via inner-sphere complexation, leading to the indirect electron transfer route for Cr(VI) reduction, that is, the electron first transferred from biochar to iron mineral through C-O-Fe binding and then to Cr(VI) with Fe(III)/Fe(II) transformation on ferric oxyhydroxides. With increasing crystallinity of ferric oxyhydroxides, the direct electron transfer between biochar and Cr(VI) became the main electron transfer avenue for Cr(VI) reduction. The indirect electron transfer was suppressed in the high-crystallinity ferric oxyhydroxides due to less sorption of Cr(VI), limited combination with biochar, and higher iron stability. This study demonstrates that electron transfer mechanisms involving iron minerals change with the mineral crystallization process, which would affect the geochemical process of contaminants with pyrogenic carbon.
Assuntos
Compostos Férricos , Poluentes Químicos da Água , Adsorção , Carbono , Carvão Vegetal/química , Cromo/química , Elétrons , Compostos Férricos/química , Ferro/química , Minerais , Poluentes Químicos da Água/análiseRESUMO
Biochar application is a promising strategy for the remediation of contaminated soil, while ensuring sustainable waste management. Biochar remediation of heavy metal (HM)-contaminated soil primarily depends on the properties of the soil, biochar, and HM. The optimum conditions for HM immobilization in biochar-amended soils are site-specific and vary among studies. Therefore, a generalized approach to predict HM immobilization efficiency in biochar-amended soils is required. This study employs machine learning (ML) approaches to predict the HM immobilization efficiency of biochar in biochar-amended soils. The nitrogen content in the biochar (0.3-25.9%) and biochar application rate (0.5-10%) were the two most significant features affecting HM immobilization. Causal analysis showed that the empirical categories for HM immobilization efficiency, in the order of importance, were biochar properties > experimental conditions > soil properties > HM properties. Therefore, this study presents new insights into the effects of biochar properties and soil properties on HM immobilization. This approach can help determine the optimum conditions for enhanced HM immobilization in biochar-amended soils.
Assuntos
Recuperação e Remediação Ambiental , Metais Pesados , Poluentes do Solo , Carvão Vegetal , Aprendizado de Máquina , Solo , Poluentes do Solo/análiseRESUMO
Phosphorus (P) as an essential nutrient for life sustains the productivity of food systems; yet misdirected P often accumulates in wastewater and triggers water eutrophication if not properly treated. Although technologies have been developed to remove P, little attention has been paid to the recovery of P from wastewater. This work provides a comprehensive review of the state-of-the-art P removal technologies in the science of wastewater treatment. Our analyses focus on the mechanisms, removal efficiencies, and recovery potential of four typical water and wastewater treatment processes including precipitation, biological treatment, membrane separation, and adsorption. The design principles, feasibility, operation parameters, and pros & cons of these technologies are analyzed and compared. Perspectives and future research of P removal and recovery are also proposed in the context of paradigm shift to sustainable water treatment technology.
RESUMO
To prevent the COVID-19 transmission, personal protective equipment (PPE) and packaging materials have been extensively used but often managed inappropriately, generating huge amount of plastic waste. In this review, we comprehensively discussed the plastic products utilized and the types and amounts of plastic waste generated since the outbreak of COVID-19, and reviewed the potential treatments for these plastic wastes. Upcycling of plastic waste into biochar was addressed from the perspectives of both environmental protection and practical applications, which can be verified as promising materials for environmental protections and energy storages. Moreover, novel upcycling of plastic waste into biochar is beneficial to mitigate the ubiquitous plastic pollution, avoiding harmful impacts on human and ecosystem through direct and indirect micro-/nano-plastic transmission routes, and achieving the sustainable plastic waste management for value-added products, simultaneously. This suggests that the plastic waste could be treated as a valuable resource in an advanced and green manner.
Assuntos
COVID-19 , COVID-19/epidemiologia , COVID-19/prevenção & controle , Carvão Vegetal , Ecossistema , Humanos , Pandemias/prevenção & controle , PlásticosRESUMO
The accumulation of microplastics (MPs) and nanoplastics (NPs) in terrestrial and aquatic ecosystems has raised concerns because of their adverse effects on ecosystem functions and human health. Plastic waste management has become a universal problem in recent years. Hence, sustainable plastic waste management techniques are vital for achieving the United Nations Sustainable Development Goals. Although many reviews have focused on the occurrence and impact of micro- and nanoplastics (MNPs), there has been limited focus on the management of MNPs. This review first summarizes the ecotoxicological impacts of plastic waste sources and issues related to the sustainable management of MNPs in the environment. This paper then critically evaluates possible approaches for incorporating plastics into the circular economy in order to cope with the problem of plastics. Pollution associated with MNPs can be tackled through source reduction, incorporation of plastics into the circular economy, and suitable waste management. Appropriate infrastructure development, waste valorization, and economically sound plastic waste management techniques and viable alternatives are essential for reducing MNPs in the environment. Policymakers must pay more attention to this critical issue and implement appropriate environmental regulations to achieve environmental sustainability.
Assuntos
Microplásticos , Poluentes Químicos da Água , Ecossistema , Poluição Ambiental , Humanos , Plásticos , Poluentes Químicos da Água/análiseRESUMO
Nitrogen-doped graphitic biochar (NBC) has boosted the development of nonradical peroxymonosulfate (PMS) activation in environmental remediation. However, the specific role of nitrogen species played in NBC-based nonradical carbocatalysis remains vaguely interpreted. To pinpoint the critical nitrogen speciation, a sophisticated thermo-mechanochemical manipulation was exploited to prepare a series of NBCs with similar dimensional structures and oxygen levels but different nitrogen species (i.e., dopants and vacancies). Different from conventional perspectives, nonradical NBC-based carbocatalysis was found to be preferably determined by the nitrogen vacancies more than their parent nitrogen dopants. Raman depth analysis evidenced that a complete transformation of nitrogen dopants into nitrogen vacancies could be achieved at 800 °C, where an excellent nonradical abatement of 4-chlorophenol (4-CH, 90.9% removal) was found for the NBC800 with a low PMS consumption (1.24 mM). According to PMS adsorption experiments, nitrogen vacancies exhibited the highest affinity toward the PMS molecules compared to nitrogen dopants, which accounted for the superior carbocatalysis. Electron paramagnetic resonance and Raman spectroscopic analyses indicated that the original PMS molecules were bound to positively charged nitrogen vacancies, and a robust metastable complex (*HSO5-) evolved subsequently via hydrogen abstraction by adjacent persistent free radicals. In situ Raman techniques could be adopted to estimate the level of nitrogen vacancies associated with the polarization of electron distribution. The flexible feature and practical prospects of nitrogen vacancy-based carbocatalysis were also observed in the remediation of simulated phenolic industrial wastewater. Overall, this study unravels the dilemma in the current NBC-based nonradical carbocatalysis and advances our understanding of nitrogen doping technology for next-generation biochar design.
Assuntos
Grafite , Adsorção , Carvão Vegetal , Nitrogênio , PeróxidosRESUMO
There is considerable debate about the sustainability of the hydraulic fracturing (HF) water cycle in North America. Recently, this debate has expanded to China, where HF activities continue to grow. Here, we provide a critical review of the HF water cycle in China, including water withdrawal practices and flowback and produced water (FPW) management and their environmental impacts, with a comprehensive comparison to the U.S. and Canada (North America). Water stress in arid regions, as well as water management challenges, FPW contamination of aquatic and soil systems, and induced seismicity are all impacts of the HF water cycle in China, the U.S., and Canada. In light of experience gained in North America, standardized practices for analyzing and reporting FPW chemistry and microbiology in China are needed to inform its efficient and safe treatment, discharge and reuse, and identification of potential contaminants. Additionally, conducting ecotoxicological studies is an essential next step to fully reveal the impacts of accidental FPW releases into aquatic and soil ecosystems in China. From a policy perspective, the development of China's unconventional resources lags behind North America's in terms of overall regulation, especially with regard to water withdrawal, FPW management, and routine monitoring. Our study suggests that common environmental risks exist within the world's two largest HF regions, and practices used in North America may help prevent or mitigate adverse effects in China.
Assuntos
Fraturamento Hidráulico , Poluentes Químicos da Água , Canadá , China , Ecossistema , América do Norte , Águas Residuárias , Água , Ciclo Hidrológico , Poluentes Químicos da Água/análiseRESUMO
Phosphorus (P) availability is closely related to the distributions of pH, O2 and phosphatase activities in the rhizosphere of plants growing in soils and sediments. In this study, the P uptake processes and mechanisms of Vallisneria natans (V. natans) during two vegetation periods (i.e., week three and six) were revealed using three noninvasive 2D imaging techniques: planar optode (PO), diffusive gradients in thin films (DGT) and zymography. The results showed that increased phosphatase activity, O2 concentration and root-induced acidification were observed together in the rhizosphere of root segments and tips. In week three, when V. natans was young, the flux of DGT-labile P accumulated more in the rhizosphere in comparison with the bulk sediment. This was because increased phosphatase activity (of up to 35%) and root-induced acidification (with pH decreasing by up to 0.25) enhanced P acquisition of V. natans by the third week. However, the flux of DGT-labile P turned to depletion during weeks three to six of V. natans growth, after Fe plaque formed at the matured stage. The constant hydrolysis of phosphatase and acidification could not compensate for the P demand of the roots by the sixth week. At this stage, Fe plaque become the P pool, due to P fixation with solid Fe(III) hydroxides. Subsequently, V. natans roots acquired P from Fe plaque via organic acid complexation of Fe(III).
Assuntos
Hydrocharitaceae , Poluentes Químicos da Água , Compostos Férricos , Sedimentos Geológicos , Fósforo , Rizosfera , Solo , Poluentes Químicos da Água/análiseRESUMO
Mono- and co-sorption of the three antibiotics i.e., norfloxacin (NOR), sulfamerazine (SMR) and oxytetracycline (OTC), to raw and NH4+-modified cassava waste biochar added to aqueous solutions were investigated. The NH4+-modified biochar showed higher sorption affinity for both NOR and SMR than the raw biochar, while the raw biochar showed higher sorption affinity for OTC than the modified biochar. The highest sorption to both biochars in both the mono- and competitive sorption systems was found for OTC followed by NOR and SMR. Sorption equilibrium in all systems analyzed was reached within 15 h. Electrostatic interactions among the ionic antibiotics in the multicomponent solution increased NOR and SMR sorption to both biochars. Antibiotics' mono- and co-sorption to biochars decreased with increasing solution pH. The co-sorption of NOR and SMR to the two biochars was regulated by π-π electron-donor-acceptor (EDA) interactions; besides, electrostatic interactions and Hydrogen (H-) bonding played an important part. Cation bridging might have been a potential mechanism to contribute to SMR sorption to the raw biochar, and OTC sorption to the NH4+-modified biochar. These observations will improve our understanding of the simultaneous removal of multiple antibiotics from water or wastewater.
Assuntos
Compostos de Amônio , Manihot , Adsorção , Antibacterianos , Carvão Vegetal , ÁguaRESUMO
The heterogeneous metal-organic framework Bi-BTC successfully catalyzed the synthesis of para-xylene from bio-based 2,5-dimethylfuran and acrylic acid in a promising yield (92 %), under relatively mild conditions (160 °C, 10â bar), and with a low reaction-energy barrier (47.3â kJ mol-1 ). The proposed reaction strategy also demonstrates a remarkable versatility for furan derivatives such as furan and 2-methylfuran.
RESUMO
Traditional liquid marbles (LMs), liquid droplets encapsulated by hydrophobic particles at the liquid-gas interface, are restricted by their short lifetime and low heat transfer efficiency. Herein, a new paradigm for LMs immersed in various liquid mediums with massive enhanced heat transfer and spatial recognition is designed; without compromising the structural integrity, the lifetime of the liquid marbles in liquid (LMIL) is extended by ≈1000 times compared to classical LMs in air or naked droplets in organic reagents. The LMIL shows promising reverse structural re-configurability while under external stimuli and maintaining their functionality for a very long period of time (≈weeks). These superior behaviors are further exploited as a miniature reactor with prolonged lifetimes and excellent temperature control, combined with its feasible operation, new opportunities will open up in the advanced chemical and biomedical engineering fields. It is also shown that LMIL can be applied in methylene blue degradation and 3D in-vitro yeast cell cultures. These findings have important implications for real-world use of LMs, with a number of applications in cell culture technology, lab-in-a-drop, polymerization, encapsulation, formulation, and drug delivery.
Assuntos
Carbonato de Cálcio , Azul de Metileno , Interações Hidrofóbicas e HidrofílicasRESUMO
Biochar has triggered a black gold rush in environmental studies as a carbon-rich material with well-developed porous structure and tunable functionality. While much attention has been placed on its apparent ability to store carbon in the ground, immobilize soil pollutants, and improve soil fertility, its temporally evolving in situ performance in these roles must not be overlooked. After field application, various environmental factors, such as temperature variations, precipitation events and microbial activities, can lead to its fragmentation, dissolution, and oxidation, thus causing drastic changes to the physicochemical properties. Direct monitoring of biochar-amended soils can provide good evidence of its temporal evolution, but this requires long-term field trials. Various artificial aging methods, such as chemical oxidation, wet-dry cycling and mineral modification, have therefore been designed to mimic natural aging mechanisms. Here we evaluate the science of biochar aging, critically summarize aging-induced changes to biochar properties, and offer a state-of-the-art for artificial aging simulation approaches. In addition, the implications of biochar aging are also considered regarding its potential development and deployment as a soil amendment. We suggest that for improved simulation and prediction, artificial aging methods must shift from qualitative to quantitative approaches. Furthermore, artificial preaging may serve to synthesize engineered biochars for green and sustainable environmental applications.
Assuntos
Carvão Vegetal , Poluentes do Solo , Carbono , Solo , Poluentes do Solo/análiseRESUMO
Acceleration of the anaerobic digestion (AD) process is crucial to achieving energy-efficient recycling of organic wastes. Hydrochar is produced by hydrothermal liquefaction of biomass, yet its application in the AD process is rarely reported. The present study showed that sewage sludge-derived hydrochar (SH) enhanced the methane production rate of glucose by 37%. SH increased the methane production rate from acetate but did not affect acidification and the methane production rate from H2/CO2. SH enhanced hydrogenotrophic methanogenesis, which could be due to direct interspecies electron transfer (DIET) by converting H+, e-, and CO2 to methane. Trichococcus and Methanosaeta were dominant in the AD process with SH. Label-free proteomic analysis showed Methanosaeta was involved in DIET as reflected by the up-regulation of proteins involved in hydrogenotrophic methanogenesis. Hydrochars derived from corn straw (CH), Enteromorpha algae (EH), and poplar wood (PH), as well as activated carbon (AC), were also tested in the AD process. SH, CH, and EH obviously increased the methane production rates, which were 39%, 15%, and 20% higher than the control experiment, respectively. It was neither electrical conductivity nor the total redox property of hydrochars and AC but the abundances of surface oxygen-containing functional groups that correlated to the methane production rates.
Assuntos
Elétrons , Oxigênio , Anaerobiose , Reatores Biológicos , Metano , Proteômica , EsgotosRESUMO
The selective degradation of recalcitrant antibiotics into byproducts with low toxicity and high biodegradability has been increasingly popular using peroxymonosulfate (PMS) based advanced oxidation processes (AOPs). In this paper, two Fe-based heterogeneous catalysts, bentonite supported Fe-Ni composite (BNF) and biochar-supported Fe composite (Fe/C), were tailored and comprehensively characterized for distinctive physicochemical properties, crystalline structures, and interfacial behaviors. Two widely used antibiotics, sulfapyridine (SPY) and oxytetracycline (OTCs) at their common concentrations in pharmaceutical wastewaters (250 and 10 mg L-1) were tested for degradation in three PMS-based oxidation processes, i.e., PMS, PMS-BNF, and PMS-Fe/C, respectively. Results demonstrated that a large amount of PMS (10 and 1 mM) could effectively remove SPY (0.385 min-1, 100% removal) and OTC (2.737 min-1, 100% removal) via1O2 derived from PMS self-decomposition and non-radical pathway, respectively. Additional Fe-based catalysts (0.5 g L-1 Fe/C and BNF) significantly reduced the PMS consumption (1 and 0.25 mM) and accelerated the reaction rate (1.08 and 5.05 min-1) of SPY and OTC removal. Moreover, the supplementary catalysts shifted the degradation route. The biochar matrix in Fe/C composite contributed to predominant interaction with PMS forming 1O2, which preferably attacked SPY via hydroxylation. In contrast, the redox-active Fe-Ni pairs induced SO4- formation, which could selectively degrade OTC through decarboxylation. Thus, these results are conducive to tailoring advanced yet low-cost heterogeneous catalysts for eco-friendly treatment of antibiotics-rich industrial wastewaters.
Assuntos
Antibacterianos , Bentonita , Carvão Vegetal , Águas Residuárias , Purificação da ÁguaRESUMO
The main objective of this work was to investigate the feasibility of using vacuum ultraviolet (VUV, 185 + 254 nm) and ultraviolet (UV, 254 nm) for the reduction of dissolved organic nitrogen (DON) and haloacetonitrile formation potential (HANFP) of surface water and treated effluent wastewater samples. The results showed that the reduction of dissolved organic carbon (DOC), DON, hydrophobicity (HPO), absorbance at 254 nm (UV254), and fluorescence excitation-emission matrix (FEEM) of both water samples by VUV was higher compared to using UV. The addition of H2O2 remarkably improved the performances of VUV and UV. VUV/H2O2 exhibited the highest removal efficiency for DOC and DON. Even though HANFP increased at the early stage, its concentration decreased (19-72%) at the end of treatment (60 min). Decreases in DON (30-41%) and DOC (51-57%) led to HANFP reduction (53-72%). Moreover, FEEM revealed that substantial reduction in soluble microbial product-like compounds (nitrogen-rich organic) had a strong correlation with HANFP reduction, implying that this group of compounds act as a main precursor of HANs. The VUV/H2O2 system significantly reduced HANFP more than UV/H2O2 and therefore is suitable for controlling HAN precursors and HAN formation in drinking water and reclaimed wastewater.