Selective decomposition of hydrazine over metal free carbonaceous materials.

Herein we report a combined experimental and computational investigation unravelling the hydrazine hydrate decomposition reaction on metal-free catalysts. The study focuses on commercial graphite and two different carbon nanofibers, pyrolytically stripped (CNF-PS) and high heat-treated (CNF-HHT), respectively, treated at 700 and 3000 °C to increase their intrinsic defects. Raman spectroscopy demonstrated a correlation between the initial catalytic activity and the intrinsic defectiveness of carbonaceous materials. CNF-PS with higher defectivity (ID/IG = 1.54) was found to be the best performing metal-free catalyst, showing a hydrazine conversion of 94% after 6 hours of reaction and a selectivity to H2 of 89%. In addition, to unveil the role of NaOH, CNF-PS was also tested in the absence of alkaline solution, showing a decrease in the reaction rate and selectivity to H2. Density functional theory (DFT) demonstrated that the single vacancies (SV) present on the graphitic layer are the only active sites promoting hydrazine decomposition, whereas other defects such as double vacancy (DV) and Stone-Wales (SW) defects are unable to adsorb hydrazine fragments. Two symmetrical and one asymmetrical dehydrogenation pathways were found, in addition to an incomplete decomposition pathway forming N2 and NH3. On the most stable hydrogen production pathway, the effect of the alkaline medium was elucidated through calculations concerning the diffusion and recombination of atomic hydrogen. Indeed, the presence of NaOH helps the extraction of H species without additional energetic barriers, as opposed to the calculations performed in a polarizable continuum medium. Considering the initial hydrazine dissociative adsorption, the first step of the dehydrogenation pathway is more favourable than the scission of the N-N bond, which leads to NH3 as the product. This first reaction step is crucial to define the reaction mechanisms and the computational results are in agreement with the experimental ones. Moreover, comparing two different hydrogen production pathways (with and without diffusion and recombination), we confirmed that the presence of sodium hydroxide in the experimental reaction environment can modify the energy gap between the two pathways, leading to an increased reaction rate and selectivity to H2.

Effects of oxygen functionalities on hydrous hydrazine decomposition over carbonaceous materials.

Metal-free heterogeneous catalysis is promising in the context of H2 generation. Therefore, establishing structure-activity relationships is a crucial issue to improve the development of more efficient catalysts. Herein, to evaluate the reactivity of the oxygen functionalities in carbonaceous materials, commercial functionalized pyrolytically stripped carbon nanofibers (CNFs) were used as catalysts in the liquid-phase hydrous hydrazine decomposition process and its activity was compared to that of a pristine CNF material. Different oxygenated groups were inserted by treating CNFs with hydrogen peroxide for 1 h (O1-H2O2) and HNO3 for 1 h (O1-HNO3) and 6 h (O6-HNO3). An increase in activity was observed as a function of the oxidizing agent strength (HNO3 > H2O2) and the functionalization time (6 h > 1 h). A thorough characterization of the catalysts demonstrated that the activity could be directly correlated with the oxygen content (O6-HNO3 > O1-HNO3 > O1-H2O2 > CNFs) and pointed out the active sites for the reaction at carbon-oxygen double bond groups (CO and COOH). Systematic DFT calculations supported rationalization of the experimental kinetic trends with respect to each oxygen group (CO, C-O-C, C-OH and COOH).

Non-destructive analysis of a mixed H2O-CO2 fluid in experimental noble-metal capsule by means of freezing and high-energy synchrotron X-ray diffraction.

High-pressure high-temperature syntheses that involve volatile-bearing aqueous fluids are typically accomplished by enclosing the samples in gas-tight welded shut noble-metal capsules, from which the bulk volatile content must be extracted to be analyzed with mass spectroscopy, hence making the analysis non-replicable. Here we describe a novel non-destructive method that ensures the identification and the quantitative estimate of the volatiles directly in the sealed capsule, focusing on fluid H2O-CO2 mixtures equilibrated with graphite at conditions of geological interest (1 GPa, 800 °C). We used a high-energy (77 keV) synchrotron X-ray radiation combined with a cryostat to produce X-ray diffraction patterns and X-ray diffraction microtomographic cross-sections of the volatile-bearing samples down to -180 °C, thus encompassing the conditions at which crystalline phases-solid CO2 and clathrate (CO2 hydrate)-form. The uncertainty of the method is < 15 mol%, which reflects the difference between the volatile proportion estimated by both Rietveld refinement of the diffraction data and by image analysis of the microtomograms, and the reference value measured by quadrupole mass spectrometry. Therefore, our method can be reliably applied to the analysis of frozen H2O-CO2 mixtures and, moreover, has the potential to be extended to experimental fluids of geological interest containing other volatiles, such as CH4, SO2 and H2S.

Role of defects in carbon materials during metal-free formic acid dehydrogenation.

Commercial graphite (GP), graphite oxide (GO), and two carbon nanofibers (CNF-PR24-PS and CNF-PR24-LHT) were used as catalysts for the metal-free dehydrogenation reaction of formic acid (FA) in the liquid phase. Raman and XPS spectroscopy demonstrated that the activity is directly correlated with the defectiveness of the carbon material (GO > CNF-PR24-PS > CNF-PR24-LHT > GP). Strong deactivation phenomena were observed for all the catalysts after 5 minutes of reaction. Density functional theory (DFT) calculations demonstrated that the single vacancies present on the graphitic layers are the only active sites for FA dehydrogenation, while other defects, such as double vacancies and Stone-Wales (SW) defects, rarely adsorb FA molecules. Two different reaction pathways were found, one passing through a carboxyl species and the other through a hydroxymethylene intermediate. In both mechanisms, the active sites were poisoned by an intermediate species such as CO and atomic hydrogen, explaining the catalyst deactivation observed in the experimental results.