Hydrogen bond formation may enhance RDC-based discrimination of enantiomers.

The distinction of enantiomers based on residual anisotropic parameters obtained by alignment in chiral poly-γ-benzyl-L-glutamate (PBLG) is among the strongest in high-resolution NMR spectroscopy. However, large variations in enantiodifferentiation among different solutes are frequently observed. One hypothesis is that the formation of hydrogen bonds between solute and PBLG is important for the distinction of enantiomers. With a small set of three almost spherical enantiomeric pairs, for which 1DCH residual dipolar couplings are measured, we address this issue in a systematic way: borneol contains a single functional group that can act as a hydrogen bond donor, camphor has a single group that may act as a hydrogen bond acceptor, and quinuclidinol can act as both hydrogen bond donor and acceptor. The results are unambiguous: although camphor shows low enantiodifferentiation with PBLG and alignment that can be predicted well by the purely steric TRAMITE approach, the distinction of enantiomers for the other enantiomeric pairs is significantly higher with alignment properties that must involve a specific interaction in addition to steric alignment.

Determination of Configuration and Conformation of a Reserpine Derivative with Seven Stereogenic Centers Using Molecular Dynamics with RDC-Derived Tensorial Constraints*.

NMR-based determination of the configuration of complex molecules containing many stereocenters is often not possible using traditional NOE data and coupling patterns. Making use of residual dipolar couplings (RDCs), we were able to determine the relative configuration of a natural product containing seven stereocenters, including a chiral amine lacking direct RDC data. To identify the correct relative configuration out of 32 possible ones, experimental RDCs were used in three different approaches for data interpretation: by fitting experimental data based singular value decomposition (SVD) using a single alignment tensor and either (i) a single conformer or (ii) multiple conformers, or alternatively (iii) using molecular dynamics simulations with tensorial orientational constraints (MDOC). Even though in all three approaches one and the same configuration could be selected and clear discrimination between possible configurations was achieved, the experimental data was not fully satisfied by the methods based on single tensor approaches. While these two approaches are faster, only MDOC is able to fully reproduce experimental results, as the obtained conformational ensemble adequately covers the conformational space necessary to describe the molecule with inherent flexibility.

The simulation of NMR data of flexible molecules: sagittamide A as an example for MD simulations with orientational constraints.

The recently developed MDOC (Molecular Dynamics with Orientational Constraints) simulation is applied for the first time to a fully flexible molecule. MDOC simulations aim to single out the naturally existing configuration of molecules and to elucidate conformer populations. The performance of the method was first demonstrated on a well-studied test case, the five-membered ring lactone (α-methylene-γ-butyrolactone). In the case of sagittamide A, one-bond 1H-13C residual dipolar couplings (RDC) are used as orientational constraints that reorient the molecule or parts of it. In addition, NOE distances and 3J scalar couplings are used as constraints. Five possible configurations of sagittamide A (labelled a to e) are considered. One experimental RDC value per flexible unit was available and this was not sufficient to single out one valid configuration. The problem could be solved by including NOE distances as well as 3J couplings as complementary constraints into the MDOC simulations. In accordance with former investigations, we confirmed the configuration a for the natural product. A detailed analysis of conformers of the central chain of 6 chiral carbon atoms could be given by inspecting the MDOC trajectory. The relative abundance of these conformers is crucial in fulfilling all three sets of constraints.

Phenanthroline-A Versatile Ligand for Advanced Functional Polymeric Materials.

The controlled incorporation of phenanthroline moieties into polymers is introduced, demonstrating their application as metal-ion complexing ligands for the construction of advanced macromolecular structures. Specifically, two phenanthroline-containing monomers based on acrylate and styrene functionalities, were synthesized. Each monomer was readily copolymerized with either N,N-dimethylacrylamide or styrene via nitroxide-mediated polymerization, resulting in narrowly distributed polar or non-polar copolymers. To demonstrate the versatility of the established polymer systems, the polar polymer was employed for transition metal induced single-chain nanoparticle formation, verified by diffusion-ordered NMR and UV/Vis spectroscopy. Furthermore, the non-polar polymer allows facile incorporation of lanthanide ions, creating luminescent metallo-polymers, in-depth characterized by advanced photophysical experiments and 2D NMR measurements.

Borane-Catalyzed Synthesis of Quinolines Bearing Tetrasubstituted Stereocenters by Hydride Abstraction-Induced Electrocyclization.

The borane-catalyzed synthesis of quinoline derivatives bearing tetrasubstituted stereocenters from vinyl anilines has been developed. Mechanistic studies and quantum-mechanical investigations support the hydride abstraction/electrocyclization/hydride addition mechanism. The products were obtained in up to 99 % yield with a diastereoselectivity of >99 % in favour for the 3a-5-cis isomer.

Q.E.COSY: determining sign and size of small deuterium residual quadrupolar couplings using an extended E.COSY principle.

Residual quadrupolar couplings contain important structural information comparable with residual dipolar couplings. However, the measurement of sign and size of especially small residual quadrupolar couplings is difficult. Here, we present an extension of the E.COSY principle to spin systems consisting of a Spin 1 coupled to a spin ½ nucleus, which allows the determination of the sign of the quadrupolar coupling of the Spin 1 nucleus relative to the heteronuclear coupling between the spins. The so-called Q.E.COSY approach is demonstrated with its sign-sensitivity using variable angle NMR, stretched gels and liquid crystalline phases applied to various CD and CD3 groups. Especially the sign-sensitive measurement of residual quadrupolar couplings that remain unresolved in conventional deuterium 1D spectra is shown.

Correlations between lithium local structure and electrochemistry of layered LiCo(1-2x)Ni(x)Mn(x)O2 oxides: 7Li MAS NMR and EPR studies.

Advanced (7)Li MAS NMR technologies and high frequency EPR are combined to identify structural motifs and their relation to electrochemical properties of layered lithium-cobalt-nickel-manganese oxides LiCo1-2xNixMnxO2 (0 < x ≤ 0.5) used as cathode materials in lithium ion batteries. Structural-chemical shift regularities were established by systematic variation of the ratio of diamagnetic Co(3+) to paramagnetic Ni/Mn ions with variable valences. While EPR allows identifying the oxidation state of transition metal ions inside the layers, (7)Li NMR probes the local structure of Li with respect to transition metal ions located in two adjacent layers. For assignment of the lithium chemical shifts, we examine first magnetically diluted LiCo1-2xNixMnxO2 with x = 0.02, where paramagnetic ions are stabilized only in Mn(4+) and Ni(3+) form. Then the studies are extended towards the intermediate compositions with x = 0.10 and 0.33, containing simultaneously paramagnetic Mn(4+), Ni(3+) and Ni(2+) ions and diamagnetic Co(3+) ions. The benefit of using NMR with ultrafast spinning rates is demonstrated for the end composition LiNi0.5Mn0.5O2 having only paramagnetic Ni(2+) and Mn(2+) ions. The local structure of Li is quantified in respect of the number of Ni(2+) and Mn(4+) neighbors. It has been demonstrated that Ni(2+) and Mn(4+) are non-randomly distributed around Li and their distribution depends on the method of synthesis. The extent of local cationic order and its effect on the electrochemical properties of LiNi0.5Mn0.5O2 are discussed.

Formation of a polymer surface with a gradient of pore size using a microfluidic chip.

Here we demonstrate the generation of polymer monolithic surfaces possessing a gradient of pore and polymer globule sizes from ~0.1 to ~0.5 µm defined by the composition of two polymerization mixtures injected into a microfluidic chip. To generate the gradient, we used a PDMS microfluidic chip with a cascade micromixer with a subsequent reaction chamber for the formation of a continuous gradient film. The micromixer has zigzag channels of 400 × 680 µm(2) cross section and six cascades. The chip was used with a reversible bonding connection, realized by curing agent coating. After polymerization in the microfluidic chip the reversible bond was opened, resulting in a 450 µm thick polymer film possessing the pore size gradient. The gradient formation in the microfluidic reaction chamber was studied using microscopic laser-induced fluorescence (µLIF) and different model fluids. Formation of linear gradients was shown using the fluids of the same density by both diffusive mixing at flow rates of 0.001 mL/min and in a convective mixing regime at flow rates of 20 mL/min. By using different density fluids, formation of a two-dimensional wedge-like gradient controlled by the density difference and orientation of the microfluidic chip was observed.

Configuration verification via RDCs on the example of a tetra-substituted pyrrolidine ring.

The configurational analysis of organic compounds is an important application for high resolution NMR spectroscopy. In the present study, a tetra-substituted pyrrolidine with four chiral carbon atoms is analyzed using classical methods based on (3) J and NOE data in solution and compared and verified with recently introduced alternative approaches via residual dipolar couplings (RDCs) in two weak anisotropic alignment media. The molecule shows sufficient rigidity in the five-membered ring for the configurational characterization with the various techniques. However, the flexibility caused by the many freely rotating bonds potentially poses problems for the interpretation of data. It is shown that RDCs measured in poly-γ-benzyl-l-glutamate and a stretched polydimethylsiloxane gel provide useful information for the distinction of diastereomers, but the success varies with the data interpretation strategy used. Although a general improvement of corresponding correlation factors is observed when limiting data to a subset of dipolar couplings directly connected to the central ring, the distinction power is reduced because of the smaller number of RDCs available for potential model falsification. Singular value decomposition for fitting experimental RDCs is able to distinguish in most cases the correct from incorrect configurations, but the differences in correlation factors can be relatively small. Surprisingly, predicting RDCs using the rod model as implemented in PALES gives best results in distinguishing the eight possible diastereomers. It is also found that the use of proton-phosphorus and carbon-phosphorus RDCs helps with the configurational analysis of the model compound.

Heterobimetallic Eu(iii)/Pt(ii) single-chain nanoparticles: a path to enlighten catalytic reactions.

We introduce the formation and characterization of heterometallic single-chain nanoparticles entailing both catalytic and luminescent properties. A terpolymer containing two divergent ligand moieties, phosphines and phosphine oxides, is synthesized and intramolecularly folded into nanoparticles via a selective metal complexation of Pt(ii) and Eu(iii). The formation of heterometallic Eu(iii)/Pt(ii) nanoparticles is evidenced by size exclusion chromatography, multinuclear NMR (1H, 31P{1H}, 19F, 195Pt) as well as diffusion-ordered NMR and IR spectroscopy. Critically, we demonstrate the activity of the SCNPs as a homogeneous and luminescent catalytic system in the amination reaction of allyl alcohol.