An Ultrafast Conducting Polymer@MXene Positive Electrode with High Volumetric Capacitance for Advanced Asymmetric Supercapacitors.

Pseudocapacitors or redox capacitors that synergize the merits of batteries and double-layer capacitors are among the most promising candidates for high-energy and high-power energy storage applications. 2D transition metal carbides (MXenes), an emerging family of pseudocapacitive materials with ultrahigh rate capability and volumetric capacitance, have attracted much interest in recent years. However, MXenes have only been used as negative electrodes as they are easily oxidized at positive (anodic) potential. To construct a high-performance MXene-based asymmetric device, a positive electrode with a compatible performance is highly desired. Herein, an ultrafast polyaniline@MXene cathode prepared by casting a homogenous polyaniline layer onto a 3D porous Ti3 C2 Tx MXene is reported, which enables the stable operation of MXene at positive potentials because of the enlarged work function after compositing with polyaniline, according to the first-principle calculations. The resulting flexible polyaniline@MXene positive electrode demonstrates a high volumetric capacitance of 1632 F cm-3 and an ultrahigh rate capability with 827 F cm-3 at 5000 mV s-1 , surpassing all reported positive electrodes. An asymmetric device is further fabricated with MXene as the anode and polyaniline@MXene as the cathode, which delivers a high energy density of 50.6 Wh L-1 and an ultrahigh power density of 127 kW L-1 .

Topochemical synthesis of 2D materials.

Since the demonstration of the unique properties of single-layer graphene and transition metal dichalcogenides (TMDs), research on two-dimensional (2D) materials has become one of the hottest topics, with the family of 2D materials quickly expanding. This expansion is mainly attributable to the development of new synthesis methods to create new materials. This review will summarize and critically analyze topochemical synthesis methods for synthesizing novel 2D materials. For example, the emerging family of 2D transition metal carbides, nitrides and carbonitrides (MXenes) are synthesized primarily by selective etching of "A" (metal) elements from MAX phases. Another 2D material, hydrogenated germanene is produced by selective etching of calcium digermanide (CaGe2). The topochemical transformation of one dichalcogenide into another and 2D oxides into 2D carbides or nitrides have attracted great attention because materials with many useful and diverse properties can be obtained by these methods. Topochemical synthesis methods provide alternative ways of synthesizing 2D materials not requiring van der Waals bonded solid precursors or vapor phase deposition, but they have not been comprehensively reviewed. In this review, we describe common principles of topochemical synthesis of 2D materials, explain synthesis mechanisms and offer an outlook for future research.

Effect of Synthesis on Performance of MXene/Iron Oxide Anode Material for Lithium-Ion Batteries.

Two-dimensional heterostructures, such as Fe2O3/MXene nanoparticles, can be attractive anode materials for lithium-ion batteries (LIBs) due to the synergy between high lithium-storage capacity of Fe2O3 and stable cyclability and high conductivity provided by MXene. Here, we improved the storage performance of Ti3C2T x (MXene)/Fe2O3 nanocomposite by confining Fe2O3 nanoparticles into Ti3C2T x nanosheets with different mixing ratios using a facile and scalable dry ball-milling process. Composites of Ti3C2T x-25 wt % Fe2O3 and Ti3C2T x-50 wt % Fe2O3 synthesized by ball-milling resulted in uniform distribution of Fe2O3 nanoparticles on Ti3C2T x nanosheets with minimum oxidation of MXene as compared to composites prepared by hydrothermal or wet sonication. Moreover, the composites demonstrated minimum restacking of the nanosheets and higher specific surface area. Among all studied composites, the Ti3C2T x-50 wt % Fe2O3 showed the highest reversible specific capacity of ∼270 mAh g-1 at 1C (∼203 mAh g-1 based on the composite) and rate performance of 100 mAh g-1 at 10C. This can open the door for synthesizing stable and high-performance MXene/transition metal oxide composites with significantly enhanced electrochemical performance for LIB applications.

MoS2 -on-MXene Heterostructures as Highly Reversible Anode Materials for Lithium-Ion Batteries.

Two-dimensional (2D) heterostructured materials, combining the collective advantages of individual building blocks and synergistic properties, have spurred great interest as a new paradigm in materials science. The family of 2D transition-metal carbides and nitrides, MXenes, has emerged as an attractive platform to construct functional materials with enhanced performance for diverse applications. Here, we synthesized 2D MoS2 -on-MXene heterostructures through in situ sulfidation of Mo2 TiC2 Tx MXene. The computational results show that MoS2 -on-MXene heterostructures have metallic properties. Moreover, the presence of MXene leads to enhanced Li and Li2 S adsorption during the intercalation and conversion reactions. These characteristics render the as-prepared MoS2 -on-MXene heterostructures stable Li-ion storage performance. This work paves the way to use MXene to construct 2D heterostructures for energy storage applications.

Two-Dimensional Arrays of Transition Metal Nitride Nanocrystals.

The synthesis of low-dimensional transition metal nitride (TMN) nanomaterials is developing rapidly, as their fundamental properties, such as high electrical conductivity, lead to many important applications. However, TMN nanostructures synthesized by traditional strategies do not allow for maximum conductivity and accessibility of active sites simultaneously, which is a crucial factor for many applications in plasmonics, energy storage, sensing, and so on. Unique interconnected two-dimensional (2D) arrays of few-nanometer TMN nanocrystals not only having electronic conductivity in-plane, but also allowing transport of ions and electrolyte through the porous nanosheets, which are obtained by topochemical synthesis on the surface of a salt template, are reported. As a demonstration of their application in a lithium-sulfur battery, it is shown that 2D arrays of several nitrides can achieve a high initial capacity of >1000 mAh g-1 at 0.2 C and only about 13% degradation over 1000 cycles at 1 C under a high areal sulfur loading (>5 mg cm-2 ).

2D molybdenum and vanadium nitrides synthesized by ammoniation of 2D transition metal carbides (MXenes).

MXenes are a rapidly growing class of 2D transition metal carbides and nitrides, finding applications in fields ranging from energy storage to electromagnetic interference shielding and transparent conductive coatings. However, while more than 20 carbide MXenes have already been synthesized, Ti4N3 and Ti2N are the only nitride MXenes reported so far. Here by ammoniation of Mo2CTx and V2CTx MXenes at 600 °C, we report on their transformation to 2D metal nitrides. Carbon atoms in the precursor MXenes are replaced with N atoms, resulting from the decomposition of ammonia molecules. The crystal structures of the resulting Mo2N and V2N were determined with transmission electron microscopy and X-ray pair distribution function analysis. Our results indicate that Mo2N retains the MXene structure and V2C transforms to a mixed layered structure of trigonal V2N and cubic VN. Temperature-dependent resistivity measurements of the nitrides reveal that they exhibit metallic conductivity, as opposed to semiconductor-like behavior of their parent carbides. As important, room-temperature electrical conductivity values of Mo2N and V2N are three and one order of magnitude larger than those of the Mo2CTx and V2CTx precursors, respectively. This study shows how gas treatment synthesis such as ammoniation can transform carbide MXenes into 2D nitrides with higher electrical conductivities and metallic behavior, opening a new avenue in 2D materials synthesis.

Two-Dimensional Titanium Carbide MXene As a Cathode Material for Hybrid Magnesium/Lithium-Ion Batteries.

As an alternative to pure lithium-ion, Li+, systems, a hybrid magnesium, Mg2+, and Li+ battery can potentially combine the high capacity, high voltage, and fast Li+ intercalation of Li-ion battery cathodes and the high capacity, low cost, and dendrite-free Mg metal anodes. Herein, we report on the use of two-dimensional titanium carbide, Ti3C2Tx (MXene), as a cathode in hybrid Mg2+/Li+ batteries, coupled with a Mg metal anode. Free-standing and flexible Ti3C2Tx/carbon nanotube composite "paper" delivered ∼100 mAh g-1 at 0.1 C and ∼50 mAh g-1 at 10 C. At 1 C the capacity was maintained for >500 cycles at 80 mAh g-1. The Mo2CTx MXene also demonstrated good performance as a cathode material in this hybrid battery. Considering the variety of available MXenes, this work opens the door for exploring a new large family of 2D materials with high electrical conductivity and large intercalation capacity as cathodes for hybrid Mg2+/Li+ batteries.

Synthesis of two-dimensional titanium nitride Ti4N3 (MXene).

We report on the synthesis of the first two-dimensional transition metal nitride, Ti4N3-based MXene. In contrast to the previously reported MXene synthesis methods - in which selective etching of a MAX phase precursor occurred in aqueous acidic solutions - here a molten fluoride salt is used to etch Al from a Ti4AlN3 powder precursor at 550 °C under an argon atmosphere. We further delaminated the resulting MXene to produce few-layered nanosheets and monolayers of Ti4N3Tx, where T is a surface termination (F, O, or OH). Density functional theory calculations of bare, non-terminated Ti4N3 and terminated Ti4N3Tx were performed to determine the most energetically stable form of this MXene. Bare and functionalized Ti4N3 are predicted to be metallic. Bare Ti4N3 is expected to show magnetism, which is significantly reduced in the presence of functional groups.