RESUMO
The influence of the substitution pattern in phthalimide boron difluoride Schiff base complexes as fluorescent molecular rotors has been investigated. Due to their ground-state zwitterionic structures, they have exhibited negative solvatochromism in absorption and blue-green emission with moderate to satisfactory photoluminescence quantum yields in solution. Ground-state and excited-state theoretical calculations and time-resolved emission spectroscopy revealed that the excited-state rotation is triggered by planar-induced charge transfer, resulting in switched emission toward the green region. Fluorescence lifetime measurements and species-associated emission spectra exhibited two emitting excited species in equilibrium via a planar transition-state barrier. The substitution pattern models showed different behavior in solid-state mechanochromic switching and were analyzed by subcell unit packing obtained from X-ray structure data. We have attempted to gain in-depth insight into the fluorescence mechanism and photoluminescence properties associated with the substitution pattern of the phthalimide motif in order to understand the structure-property-function relationship.
RESUMO
Stacked centrosymmetrical dimers and simultaneously H-bonded and stacked hexamers of thiophene-substituted diketopyrrolopyrrole (ThDPP) were studied using DFT as models for crystals with slipped-stacked molecules in 1D columns. Eight stacked dimer arrangements were found, six of which are driven by the minimisation of electron repulsion and realised by placing the partially negatively charged atoms of the diketopyrrolopyrrole rings below the centre of an adjacent thiophene ring. Four of these stacks are related to N,N'-dialkylated derivatives of ThDPP found in the literature, while a further one is related to an N,N'-diacylated derivative. An analogous set of eight stacks was discovered computationally for phenyl-substituted DPP (PhDPP), four of which are known among H-bonded DPP pigments, and one more among N,N'-dialkylated PhDPP derivatives. The results shed more light on the mechanisms that drive the formation of stacks between nonaromatic (DPP) and aromatic (Th, Ph) rings. The excitation energies of the lowest four singlet states computed by TD DFT enabled excitonic coupling and energy separation between Frenkel-resonance-type and charge-transfer states to be established, depending on the equilibrium stack geometry.
Assuntos
Elétrons , TiofenosRESUMO
Organic semiconductors are constantly gaining interest in regenerative medicine. Their tunable physico-chemical properties, including electrical conductivity, are very promising for the control of stem-cell differentiation. However, their use for combined material-based and electrical stimulation remains largely underexplored. Therefore, we carried out a study on whether a platform based on the conductive polymer poly(3,4-ethylenedioxythiophene):polystyrene sulfonate (PEDOT:PSS) can be beneficial to the differentiation of mouse embryonic stem cells (mESCs). The platform was prepared using the layout of a standard 24-well cell-culture plate. Polyethylene naphthalate foil served as the substrate for the preparation of interdigitated gold electrodes by physical vapor deposition. The PEDOT:PSS pattern was fabricated by precise screen printing over the gold electrodes. The PEDOT:PSS platform was able to produce higher electrical current with the pulsed-direct-current (DC) electrostimulation mode (1 Hz, 200 mV/mm, 100 ms pulse duration) compared to plain gold electrodes. There was a dominant capacitive component. In proof-of-concept experiments, mESCs were able to respond to such electrostimulation by membrane depolarization and elevation of cytosolic calcium. Further, the PEDOT:PSS platform was able to upregulate cardiomyogenesis and potentially inhibit early neurogenesis per se with minor contribution of electrostimulation. Hence, the present work highlights the large potential of PEDOT:PSS in regenerative medicine.
Assuntos
Compostos Bicíclicos Heterocíclicos com Pontes/química , Diferenciação Celular , Condutividade Elétrica , Células-Tronco Embrionárias Murinas/citologia , Polímeros/farmacologia , Poliestirenos/química , Animais , Técnicas de Cultura de Células , Eletrodos , Camundongos , Células-Tronco Embrionárias Murinas/efeitos dos fármacos , Polímeros/químicaRESUMO
The synthesis, XRD single-crystal structure, powder XRD, and solid-state fluorescence of two new DPA-DPS-EWG derivatives (DPA=diphenylamino, DPS=2,5-diphenyl-stilbene, EWG=electron-withdrawing group, that is, carbaldehyde or dicyanovinylene, DCV) are described. Absorption and fluorescence maxima in solvents of various polarity show bathochromic shifts with respect to the parent DPA-stilbene-EWGs. The electronic coupling in dimers and potential twist elasticity of monomers were studied by density functional theory. Both polymorphs of the CHO derivative emit green fluorescence (527 and 550â nm) of moderate intensity (10 % and 5 %) in polycrystalline powder form. Moderate (5 %) red (672â nm) monomer-like emission was also observed for the first polymorph of the DCV derivative, whereas more intense (32 %) infrared (733â nm) emission of the second polymorph was ascribed to the excimer fluorescence.
RESUMO
The infrared multiple-photon dissociation (IRMPD) spectrum of protonated tetralin (1,2,3,4-tetrahydronaphthalene, THN) has been recorded using an infrared free electron laser coupled to a Fourier transform ion cyclotron mass spectrometer. IR-induced fragmentation of the protonated parent [THN + H] +, m/z 133, yielded a single fragment ion at m/z 91. No evidence for fragment ions at m/z 131 or 132 was observed, indicating that protonated THN ejects neither atomic H nor molecular H2. Comparison of the experimental spectrum with density functional calculations (B3LYP/6-311++G(d,p)) of the two possible protonated isomers identifies a preference for the position of protonation. Possible decomposition pathways starting from both [THN + H(5)]+ and [THN + H(6)]+ are investigated. The potential energy profiles computed for these decomposition routes reveal that (1) the m/z 91 ionic product resembles the benzylium ion, but with the extra hydrogen and the methylene substituents in various ortho, meta, and para conformations around the aromatic ring and that (2) the decomposition process involving the [THN + H(6)]+ isomer is predominant, while the one involving the [THN + H(5)]+ may play a smaller role. Potential energy pathways from the initial decomposition product(s) to the benzylium and tropylium ions have also been computed. Given the relatively low barriers to these ions, it is concluded that the benzylium ion and, with sufficient activation, the tropylium ion plus neutral propene are the final products.
RESUMO
In this paper we report on the neutral-neutral reaction of the C3 carbon cluster with H2S in solid inert argon at 12 K, conditions that mimic, in part, the surfaces of interstellar grains. In the first step of the reaction, a C3â¢H2S complex is formed via an almost barrierless entrance addition mechanism. This complex, stabilized by an estimated 7.45 kJ/mol (CCSD(T)/aug-cc-pVTZ//B3LYP/6-311++G(d,p) level), is formed by the interaction of a terminal carbon of C3 with a hydrogen in H2S. This con-covalent complex displays a band at 2044.1 cm(-1) observed via Fourier transform infrared absorption spectroscopy. With the help of the MP2/aug-ccpVDZ level method, this band is assigned to the CC asymmetric vibration mode. When the complex is exposed to UV-visible photons (hν < 5.5 eV) the tricarbon sulfur C3S molecule is identified, based on the appearance of a characteristic CC stretching band at 2047.5 cm(-1). Calculated ground-state potential energy surfaces also confirm the concomitant formation of molecular H2. This facile reaction pathway involves an attainable transition state of 174.4 kJ/mol. Conversely, competing lower-energy reaction pathways that would lead to the generation of H2C3S (propadienethione), or C2H2 (acetylene) and CS, involve much more complex, multi-stage pathways, and are not observed experimentally.
RESUMO
The solid-state fluorescence (SSF) of eight DPA-DPS-EWG derivatives (DPA = diphenylamino, DPS = 2,5-diphenyl-stilbene building block, EWG = electron withdrawing group) was studied. Varying the strength of the EWG enabled the tuning of the LUMO energy within a range broader than 1 eV, while the simultaneous changes of HOMO energy were less than 0.1 eV, according to cyclic voltammetry. The fluorescence maxima in dichloromethane laid between 483 and 752 nm and exhibited monoexponential decay and a photoluminescence quantum yield (PLQY) always higher than 35%. Six derivatives with a SSF PLQY higher than 10% in polycrystalline powder form continuously covered the range from 475 to 733 nm. Three components of SSF multiexponential decay, obtained by time-resolved fluorescence spectroscopy, were ascribed to exciton migration to nonfluorescent traps, and monomer-like and aggregate fluorescence. The character of the emitting aggregates was evaluated by quantum chemical modelling based on time-dependent density functional theory computations, carried out on the dimer arrangements obtained by X-ray diffractometry of the single crystals.
RESUMO
The hydration of glycine is investigated by comparing the structures of bare glycine to its hydrated complexes, glycine.H(2)O and glycine.(H(2)O)(2). The Fourier transform infrared spectra of glycine and glycine.water complexes, embedded in Ar matrices at 12 K, have been recorded and the results were compared to density functional theory (DFT) calculations. An initial comparison of the experimental spectra was made to the harmonic infrared spectra of putative structures calculated at the MPW1PW91/6-311++G(d,p) level of theory. The results suggest that bare glycine adopts a C(s) symmetry structure (G-1), where the hydrogens of the amino NH(2) hydrogen-bond intramolecularly with the carboxylic acid C horizontal lineO oxygen. Also observed as minor constituents are the next two lowest-energy structures, one in which the carboxylic acid (O-)H group hydrogen-bonds to the amino NH(2) group (G-2), and the other where intramolecular hydrogen bonding occurs between the NH(2) and the carboxylic acid O(-H) groups (G-3). The abundances of these structures are estimated at 84%, 9% and 8%, respectively. The least favored structure, G-3, can be eliminated by annealing the matrix to 35 K. Addition of the first water molecule to G-1 takes place at the carboxylic acid group, with simultaneous hydrogen bonding of the water molecule to the carboxylic acid (C=)O and (O-)H. The results are consistent with the predominance of this structure, although there is evidence for a small amount of a hydrated G-2 structure. Addition of the second water molecule is less definitive, as only a small number of intense infrared modes can be unambiguously assigned to glycine.(H(2)O)(2). Anharmonic frequency calculations based on second-order vibrational perturbation theory have also been carried out. It is shown that such calculations can generate improved estimates (i.e., approximately 2%) of the experimental frequencies for glycine and glycine.H(2)O, provided that the potential energy surfaces are modeled with high-level ab initio approaches (MP2/aug-cc-pVDZ).
Assuntos
Glicina/química , Água/química , Simulação por Computador , Isomerismo , Estrutura Molecular , Espectroscopia de Infravermelho com Transformada de FourierRESUMO
The singlet fission (SF) process discovered in bis(thienyl)diketopyrrolopyrroles (TDPPs) can boost their potential for photovoltaics (PV). The crystal structures of TDPP analogs carrying n-hexyl, n-butyl, or 2-(adamant-1-yl)ethyl substituents are similar, but contain increasingly slipped stacked neighbor molecules. The observed SF rate constants, kSF , (7±4), (9±3) and (5.6±1.9) ns-1 for thin films of the three compounds, respectively, are roughly equal, but the triplet quantum yields vary strongly: (120±40), (160±40) and (70±16), respectively. The recent molecular pair model reproduces the near equality of all three kSF at the crystal geometries and identifies all possible pair arrangements in which SF is predicted to be faster, by up to two orders of magnitude. However, it is also clear that the presently non-existent ability to predict the rates of processes competing with SF is pivotal for providing a guide for efforts to optimize the materials for PV.
RESUMO
1,2-Dihydronaphthalene (DHN) has been studied by matrix isolation infrared absorption spectroscopy, multiphoton infrared photodissociation (IRMPD) action spectroscopy, and density functional theory calculations. Formed by electrospray ionization, protonated 1,2-dihydronapthalene was injected into a Fourier transform ion cyclotron resonance mass spectrometer coupled to an infrared-tunable free electron laser and its IRMPD spectrum recorded. Multiphoton infrared irradiation of the protonated parent (m/z 131) yields two dissociation products, one with m/z 129 and the other with m/z 91. Results from density functional theory calculations (B3LYP/6-31++G(d,p)) were compared to the low-temperature matrix isolation infrared spectrum of neutral DHN, with excellent results. Calculations reveal that the most probable site of protonation is the 3-position, producing the trihydronaphthalene (THN) cation, 1,2,3-THN(+). The observed IRMPD spectrum of vapor-phase protonated parent matches well with that computed for 1,2,3-THN(+). Extensive B3LYP/6-31G(d,p) calculations of the potential energy surface of 1,2,3-THN(+) have been performed and provide insight into the mechanism of the two-channel photodissociation. These results provide support for a new model of the formation of H(2) in the interstellar medium. This model involves hydrogenation of a PAH cation to produce one or more aliphatic hydrogen-bearing carbons on the PAH framework, followed by photolytic formation and ejection of H(2).
RESUMO
Copper-carbon clusters, formed by dual Nd/YAG laser vaporization, have been trapped in solid Ar at 12 K and investigated by infrared spectroscopy. Density functional calculations of a number of possible molecular structures for Cu/carbon clusters have been performed, and their associated vibrational harmonic mode frequencies and dissociation energies have been determined with a 6-311++G(3df) basis set using both B3LYP and MPW1PW91 functionals. Both computations and (13)C-isotopic substitution experiments indicate that new bands observed at 1830.0 and 1250.5 cm(-1) are due to the asymmetric and symmetric CC stretching modes, respectively, in the near-linear CuC3(X(2)A') cluster. Photoinduced (12/13)C-isotopic scrambling in Cu(12/13)C3 clusters has also been observed. The mechanism for the photoscrambling is shown to involve the formation of a bicyclic CuC3 isomer.
RESUMO
Silver-carbon clusters were formed by dual Nd:YAG laser vaporization, trapped in a solid Ar matrix at 12 K, and investigated by infrared spectroscopy. Two new infrared absorption bands were observed at 1827.8 and 1231.6 cm(-1). Isotopic ((13)C) substitution experiments were performed to aid in their assignment. Possible structures considered for the carrier of these bands were Ag(m)C(n) with m = 1 and 2 and n = 1-3, all of which were investigated by density functional theory calculations. The geometries and associated vibrational harmonic-mode frequencies of these clusters were computed with the MPW1PW91 functional and SDD basis set. Both calculations and (13)C-isotopic substitution experiments indicate that the new bands are due to the asymmetric and symmetric C=C stretching modes, respectively, in near-linear AgC3.
RESUMO
Biocompatibility tests and a study of the electrical properties of thin films prepared from six electroactive polymer ink formulations based on poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) were performed. The aim was to find a suitable formulation of PEDOT:PSS and conditions for preparing thin films in order to construct printed bioelectronic devices for biomedical applications. The stability and electrical properties of such films were tested on organic electrochemical transistor (OECT)-based sensor platforms and their biocompatibility was evaluated in assays with 3T3 fibroblasts and murine cardiomyocytes. It was found that the thin films prepared from inks without an additive or any thin film post-treatment provide limited conductivity and stability for use in biomedical applications. These properties were greatly improved by using ethylene glycol and thermal annealing. Addition or post-treatment by ethylene glycol in combination with thermal annealing provided thin films with electrical resistance and a stability sufficient to be used in sensing of animal cell physiology. These films coated with collagen IV showed good biocompatibility in the assay with 3T3 fibroblasts when compared to standard cell culture plastics. Selected films were then used in assays with murine cardiomyocytes. We observed that these cells were able to attach to the PEDOT:PSS films and form an active sensor element. Spontaneously beating clusters were formed, indicating a good physiological status for the cardiomyocyte cells. These results open the door to construction of cheap printed electronic devices for biointerfacing in biomedical applications. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 106A: 1121-1128, 2018.
Assuntos
Materiais Biocompatíveis/farmacologia , Compostos Bicíclicos Heterocíclicos com Pontes/química , Eletricidade , Tinta , Teste de Materiais , Polímeros/química , Poliestirenos/química , Células 3T3 , Animais , Linhagem Celular , Impedância Elétrica , Camundongos , Água/químicaRESUMO
In this paper three different "push-pull" 4-aminoazobenzene dyes have been synthesized in order to characterize their photochromic behavior in different solvents. The molecular geometry was optimized by DFT/B3LYP functional combined with the standard 6-31+G(d,p) basis set for trans (E) and cis (Z) isomers and the energy levels of HOMO and LUMO frontier orbitals were computed using IEFPCM solvation in CHCl3 and DMF. The calculated results were compared to the experimental optical band gap and HOMO values of cyclic voltammetry. The intramolecular six-membered hydrogen bond was formed in both isomers of the synthesized dyes. The thermodynamic parameters such as total electronic energy E (RB3LYP), enthalpy H298 (sum of electronic and thermal enthalpies), free Gibbs energy G298 (sum of electronic and thermal free Gibbs energies) and dipole moment µ were computed for trans (E) and cis (Z) isomers in order to estimate the ΔEtransâcis, Δµtransâcis, ΔHtransâcis, ΔGtransâcis and ΔStransâcis values. The NBO analysis was performed in order to understand the intramolecular charge transfer and energy of resonance stabilization. The solvatochromic shift was evaluated by UV-VIS spectroscopy in CHCl3 (nonpolar), EtOH (polar protic) and DMF (polar aprotic) solvents to determine the electron withdrawing and donating properties of the substituents on electron transitions energy. Through the increasing solvent polarity a strong bathochromic shift is observed. The photoisomerization experiments have been performed in two solvents CHCl3 (nonpolar) and DMF (polar aprotic) by UV light irradiation with λ=365nm at equal concentrations and time of illuminations. The electronic spectra were computed by TD-DFT after geometry optimization using IEFPCM solvation in CHCl3 and DMF. The degree of photoisomerization was calculated for the three azo chromophores in both solvents. By using first derivative of the UV-VIS spectra it was possible to resolve the overlapped electron transitions absorption bands. The existing intramolecular hydrogen bond in the azo chromophores was discussed in relation to the isomerization mechanisms and relative stability of the cis (Z) isomers.
RESUMO
DNA-Hg complexes may play an important role in sensing DNA defects or in detecting the presence of Hg in the environment. A fundamental way of characterizing DNA-Hg complexes is to study the way the electric charge is transferred through the molecular chain. The main goal of this contribution was to investigate the impact of a mercury metal cation that links two thymine bases in a DNA T-T mismatched base pair (T-Hg-T) on charge transfer through the DNA molecule. We compared the charge transfer efficiencies in standard DNA, DNA with mismatched T-T base pairs, and DNA with a T-Hg(II)-T base pair. For this purpose, we measured the temperature dependence of steady-state fluorescence and UV-vis of the DNA molecules. The experimental results were confronted with the results obtained employing theoretical DFT methods. Generally, the efficiency of charge transfer was driven by mercury changing the spatial overlap of bases.
Assuntos
DNA/química , Mercúrio/química , Modelos Teóricos , Timina/química , Pareamento de Bases , Cátions/química , DNA/metabolismo , Espectrofotometria Ultravioleta , TemperaturaRESUMO
Oligonucleotides conduct electric charge via various mechanisms and their characterization and understanding is a very important and complicated task. In this work, experimental (temperature dependent steady state fluorescence spectroscopy, time-resolved fluorescence spectroscopy) and theoretical (Density Functional Theory) approaches were combined to study charge transfer processes in short DNA/DNA and RNA/DNA duplexes with virtually equivalent sequences. The experimental results were consistent with the theoretical model - the delocalized nature of HOMO orbitals and holes, base stacking, electronic coupling and conformational flexibility formed the conditions for more effective short distance charge transfer processes in RNA/DNA hybrids. RNA/DNA and DNA/DNA charge transfer properties were strongly connected with temperature affected structural changes of molecular systems - charge transfer could be used as a probe of even tiny changes of molecular structures and settings.
Assuntos
DNA/química , Modelos Teóricos , RNA/química , DNA/metabolismo , Teoria Quântica , RNA/metabolismo , Espectrometria de Fluorescência , TemperaturaRESUMO
Four different derivatives of diphenyl-diketo-pyrrolopyrrole (DPP) with alkyl side groups were synthesized to increase their solubility. Quantum chemical calculations revealed that the substitution influenced molecular geometry and subsequently modified absorption and photoluminescence spectra. The theoretical results were confirmed by experimental characterization. With increasing phenyl torsion the vibrational structure was less pronounced and larger Stokes shift was observed. Simultaneously, the molar absorption coefficient decreased as the deformation increased. On the other hand, the measured fluorescence quantum yields were modified only slightly. This indicates the possibility to prepare soluble derivatives without loss of quantum yields and to use these materials for construction of efficient and stable electroluminescent devices. Furthermore, the electroluminescence of the thin layer devices based on the soluble low molecular DPPs were characterized and discussed.
RESUMO
The IR absorption spectrum of salicylhydroxamic acid (sha) isolated in an argon matrix at 12-21 K has been recorded. Calculations of all the possible entgegen and zusammen keto conformers of sha have been performed at the B3LYP/6-311++G(d,p) level of theory. The computed energies, optimized structures, and relative abundances show that sha exists in the matrix as the z,z,z,z-conformer [relative to the C-O(-H), C-C(-N), C-N and N-O bonds, respectively] and is stabilized by two intramolecular H-bonds. Photofragmentation of the compound in matrix and methanol-water solution has been obtained by irradiation with visible and ultraviolet light. o-Hydroxyphenylisocyanate is the main photolysis product in an argon matrix, while salicylamide is the primary photolysis product in methanol-water solution.
Assuntos
Fotoquímica/métodos , Salicilamidas/química , Carbono/química , Físico-Química/métodos , Simulação por Computador , Hidrogênio/química , Ligação de Hidrogênio , Metanol/química , Modelos Químicos , Conformação Molecular , Oxigênio/química , Software , Espectrofotometria Infravermelho/métodos , Temperatura , Água/químicaRESUMO
The vibrational and electronic absorption spectra of dibenzo[b,def]chrysene (DBC) and its ions in argon matrixes have been recorded. Assignment of the observed infrared (IR) bands has been made by comparison with the density functional theory (DFT) computations of harmonic vibrational frequencies (with 6-31G(d,p) or 6-311+G(d,p) basis sets). Extensive time-dependent (TD) DFT calculations of vertical excitation energies have aided in the assignment of the experimental electronic absorption transitions. In general, the theoretical predictions are in good agreement with the observed ultraviolet and visible bands. By correlating IR and UV-visible band intensities (after UV photolysis), it has been shown that both DBC cations and anions are formed. The IR band intensity distributions of the DBC ions differ markedly from neutral DBC. A synthetic spectrum composed of neutral, cationic, and anionic DBC contributions compares reasonably well with the interstellar features of the "unidentified infrared" (UIR) bands from the reflection nebula NGC 7023. Finally, it is shown that the electronic absorption bands of the DBC ions lie in close proximity to several of the diffuse interstellar visible absorption bands (DIBs).
Assuntos
Crisenos/química , Espectrofotometria Infravermelho/métodos , Espectrofotometria Ultravioleta/métodos , ÍonsRESUMO
The C4H2+ diacetylene radical cation has been generated in a pulsed jet electrical discharge through both a diacetylene/argon mixture and an acetylene/argon mixture. The product mixture was trapped on a 12 K cryostat window and studied via Fourier transform infrared absorption spectroscopy. The diacetylene cation was also produced via low energy electron bombardment of an effusive C4H2/Ar beam. Two new infrared bands at 3201.6 and 1827.9 cm(-1) have been identified as vibrations of the diacetylene cation, viz the v4 (sigmau) (C-H stretching) and the v5(sigmau) (C[triple bond]C stretching) modes, respectively. Geometry optimization and harmonic frequency calculations, carried out at various spin unrestricted levels (B3LYP, CCSD(T)) for spin doublet structures, indicate that, in its electronic ground state X2pi(g), the C4H2+ cation is linear. Three additional new bands at 2957.5, 1693.8 and 594.5 cm(-1) have been tentatively assigned to the C-H stretching, C[triple bond]C stretching and C[triple bond]C-H (in-plane) bending modes, respectively, of the nonlinear diacetylene anion (C4H2-, X2B(u)).