The chaperonin CCT controls T cell receptor-driven 3D configuration of centrioles.

T lymphocyte activation requires the formation of immune synapses (IS) with antigen-presenting cells. The dynamics of membrane receptors, signaling scaffolds, microfilaments, and microtubules at the IS determine the potency of T cell activation and subsequent immune response. Here, we show that the cytosolic chaperonin CCT (chaperonin-containing TCP1) controls the changes in reciprocal orientation of the centrioles and polarization of the tubulin dynamics induced by T cell receptor in T lymphocytes forming an IS. CCT also controls the mitochondrial ultrastructure and the metabolic status of T cells, regulating the de novo synthesis of tubulin as well as posttranslational modifications (poly-glutamylation, acetylation, Δ1 and Δ2) of αß-tubulin heterodimers, fine-tuning tubulin dynamics. These changes ultimately determine the function and organization of the centrioles, as shown by three-dimensional reconstruction of resting and stimulated primary T cells using cryo-soft x-ray tomography. Through this mechanism, CCT governs T cell activation and polarity.

Single centrosome manipulation reveals its electric charge and associated dynamic structure.

The centrosome is the major microtubule-organizing center in animal cells and consists of a pair of centrioles surrounded by a pericentriolar material. We demonstrate laser manipulation of individual early Drosophila embryo centrosomes in between two microelectrodes to reveal that it is a net negatively charged organelle with a very low isoelectric region (3.1 +/- 0.1). From this single-organelle electrophoresis, we infer an effective charge smaller than or on the order of 10(3) electrons, which corresponds to a surface-charge density significantly smaller than that of microtubules. We show, however, that the charge of the centrosome has a remarkable influence over its own structure. Specifically, we investigate the hydrodynamic behavior of the centrosome by measuring its size by both Stokes law and thermal-fluctuation spectral analysis of force. We find, on the one hand, that the hydrodynamic size of the centrosome is 60% larger than its electron microscopy diameter, and on the other hand, that this physiological expansion is produced by the electric field that drains to the centrosome, a self-effect that modulates its structural behavior via environmental pH. This methodology further proves useful for studying the action of different environmental conditions, such as the presence of Ca(2+), over the thermally induced dynamic structure of the centrosome.

Purification and functional characterization of p16, the ATPase of the bacteriophage Phi29 packaging machinery.

Bacteriophage Phi29 codes for a protein (p16) that is required for viral DNA packaging both in vivo and in vitro. Co-expression of p16 with the chaperonins GroEL and GroES has allowed its purification in a soluble form. Purified p16 shows a weak ATPase activity that is stimulated by either DNA or RNA, irrespective of the presence of any other viral component. The stimulation of ATPase activity of p16, although induced under packaging conditions, is not dependent of the actual DNA packaging and in this respect the Phi29 enzyme is similar to other viral terminases. Protein p16 competes with DNA and RNA in the interaction with the viral prohead, which occurs through the N-terminal region of the connector protein (p10). In fact, p16 interacts in a nucleotide-dependent fashion with the viral Phi29-encoded RNA (pRNA) involved in DNA packaging, and this binding can be competed with DNA. Our results are consistent with a model for DNA translocation in which p16, bound and organized around the connector, acts as a power stroke to pump the DNA into the prohead, using the hydrolysis of ATP as an energy source.

The three-dimensional structure of a DNA translocating machine at 10 A resolution.

BACKGROUND: Head-tail connectors are viral substructures that are very important in the viral morphogenetic cycle, having roles in the formation of the precursor capsid (prohead), DNA packaging, tail binding to the mature head and in the infection process. Structural information on the connector would, therefore, help us to understand how this structure is related to a multiplicity of functions. RESULTS: Recombinant bacteriophage phi29 connectors have been crystallized in two-dimensional aggregates. An average projection image and a three-dimensional map have been obtained at 8 A and 10 A resolution, respectively, from untilted and tilted images of vitrified specimens of the two-dimensional crystals. The average projection image reveals a central mass surrounding a channel with 12 appendages protruding from the central mass. The three-dimensional map reveals a wide domain surrounded by 12 appendages that interact with the prohead vertex, and a narrow domain that interacts with the bacteriophage tail. At the junction of the two domains, 12 smaller appendages are visualized. A channel runs along the axis of the connector structure and is sufficiently wide to allow a double-stranded DNA molecule to pass through. CONCLUSIONS: The propeller-like structure of the phi29 connector strengthens the notion of the connector rotating during DNA packaging. The groove formed by the two lanes of large and small appendages may act as a rail to prevent the liberation of the connector from the prohead vertex during rotation.

A Triton X-100-hydroxyapatite procedure for a rapid purification of bovine heart cytochrome-c oxidase. Characterization of the cytochrome-c oxidase/Triton X-100/phospholipid mixed micelles by laser light scattering.

Cytochrome-c oxidase (ferrocytochrome-c:oxygen oxidoreductase, EC 1.9.3.1) has been isolated from bovine heart mitochondria by the combined use of the non-ionic detergent Triton X-100 as solubilizing agent and hydroxyapatite chromatography as the most important step in the purification of this membrane protein. This method is fast and very reproducible. The enzymic complex, purified in the form of protein/detergent/phospholipid mixed micelles, contains 9.7 mumol heme a per mg protein, and has a high molecular activity (500 mol cytochrome c per s per mol enzyme). These mixed micelles have been studied by laser light scattering, which has shown that the average molecular weight of the micelles is 540 +/- 80 kDa. This implies that cytochrome-c oxidase is purified in the form of a dimer. The average quadratic radius of gyration of the micelles is 40 +/- 10 nm, corresponding in our case to an approximately spherical shape.

Role of the amino terminal domain in GroES oligomerization.

Digestions of the GroES oligomer with trypsin, chymotrypsin and Glu-C protease from Staphylococcus aureus V8 (V8) have helped to locate three regions in the GroES sequence that are sensitive to limited proteolysis and have provided information of the GroES domains involved in monomer-monomer and GroEL interaction. The removal of the first 20 or 27 amino acids of the N-terminal region of each GroES monomer by trypsin or chymotrypsin respectively, abolish the oligomerization of the GroES complex and its binding to GroEL. The V8-treatment of GroES promotes the breakage of the peptide bond between Glu18 and Thr19 but not the liberation of the N-terminal fragment from the GroES oligomer, which is capable of forming with GroEL a complex active in protein folding. It is deduced from these results that the N-terminal region of the GroES monomer is involved in monomer-monomer interaction, providing experimental evidence that relates some biochemical properties of GroES with its three-dimensional structure at atomic resolution.

Laser light-scattering characterization of mitochondrial complex III-Triton X-100-phospholipid mixed micelles.

Bovine-heart mitochondrial complex III was purified in the presence of Triton X-100, and the size and shape of the resulting protein-surfactant-phospholipid mixed micelles were investigated by laser light-scattering. The protein appears to be present in the form of a dimer, irrespective of temperature (between 25 and 40 degrees C) and protein concentration (between 0.5 and 5 mg/ml). The molecular weight of the micelle increases with temperature from 600 000 (25 degrees C) to 692 000 (40 degrees C). The variation of the solvent second virial coefficient in this temperature range suggests that, with increasing temperature, some of the free surfactant molecules become integrated in the mixed micelles. The average quadratic radius of gyration of these is of 42 +/- 5 nm, corresponding in our case to an ellipsoidal shape.

An infrared spectroscopic study of specifically deuterated fatty-acyl methyl groups in phosphatidylcholine liposomes.

The region of the infrared spectrum corresponding to C-2H stretching vibrations (2050-2250 cm-1) has been examined for liposomes composed of dimyristoylphosphatidylcholine deuterated specifically at the methyl ends of either one (sn-2) or both the fatty acyl chains. This label is intended to provide information on lipid dynamics in the contact region between monolayers. The two most prominent bands observed correspond, respectively, to antisymmetric (2212 cm-1) and symmetric (2075 cm-1) C-2H stretching vibration. The antisymmetric band consists of two overlapping peaks, whose positions vary with the gel or liquid-crystalline state of the lipid. The separation between the peaks making up the antisymmetric band increases with temperature, and is maximum above the Tc transition temperature; this rules out the previously proposed assignment of these two peaks to different rotational modes of the methyl group relative to the adjacent methylene. The position and width of the symmetric band at 2075 cm-1 are also sensitive to the physical state of the lipid. The presence of cholesterol at an equimolar ratio with the phospholipid abolishes all the phase-dependent changes observed. The intrinsic polypeptide gramicidin A, at a 5:1 lipid/peptide mol ratio, is seen to enlarge the lipid thermotropic transition, with small effects above Tc. Cytochrome c, an extrinsic protein, at a 10:1 mole ratio, does not modify the phase-dependent behaviour of the terminal methyl groups, but consistently shifts all the observed bands to lower-frequency positions, which suggests a long-range effect of the protein along the phospholipid fatty acyl chains.

Interactions of the HIV-1 fusion peptide with large unilamellar vesicles and monolayers. A cryo-TEM and spectroscopic study.

We have examined the interaction of the human immunodeficiency virustype 1 fusion peptide (23 amino acid residues) and of a Trp-containing analog with vesicles composed of dioleoylphosphatidylcholine, dioleoylphosphatidylethanolamine and cholesterol (molar ratio, 1:1:1). Both the native and the Trp-substituted peptides bound the vesicles to the same extent and induced intervesicular lipid mixing with comparable efficiency. Infrared reflection-absorption spectroscopy data are compatible with the adoption by the peptide of a main beta-sheet structure in a cospread lipid/peptide monolayer. Cryo-transmission electron microscopy observations of peptide-treated vesicles reveal the existence of a peculiar morphology consisting of membrane tubular elongations protruding from single vesicles. Tryptophan fluorescence quenching by brominated phospholipids and by water-soluble acrylamide further indicated that the peptide penetrated into the acyl chain region closer to the interface rather than into the bilayer core. We conclude that the differential partition and shallow penetration of the fusion peptide into the outer monolayer of a surface-constrained bilayer may account for the detected morphological effects. Such single monolayer-restricted interaction and its structural consequences are compatible with specific predictions of current theories on viral fusion.

Lipid-protein interactions. The mitochondrial complex III-phosphatidylcholine-water system.

Bovine heart mitochondrial complex III (ubiquinol-cytochrome-c reductase) has been reconstituted into phosphatidylcholine bilayers and the effect of varying lipid/protein ratios on the structure and function of the protein has been examined. Electron microscopy, differential scanning calorimetry and Arrhenius plots of enzyme activity provide evidence that the protein is incorporated in an active conformation into pure phosphatidylcholine bilayers. At low lipid/protein ratios (e.g. 80:1 molar ratio) the protein exists in the form of aggregates. As the lipid proportion is increased, electron microscopy reveals the gradual formation of lipid bilayers; structures with the appearance of closed vesicles are seen at or above 300:1 phospholipid/protein molar ratios. Changes in enzyme activity as a function of lipid contents reveal a progressive increase in activity as more lipid is added, with a tendency to reach a saturation point. From the experimental data, a kinetic model is proposed, according to which the protein has an indefinite number of unspecific, independent and identical binding sites for phospholipids, the latter acting as essential enzyme activators. Varying lipid/protein ratios induce structural changes in complex III; visible spectra indicate changes in the polarity of the heme group environment, while Fourier-transform infrared spectroscopy suggests a change in the secondary structure of the protein as the lipid proportion is increased.

Analysis of electron microscope images and electron diffraction patterns of thin crystals of phi 29 connectors in ice.

Images and diffraction patterns of frozen-hydrated thin crystals of phi 29 connectors were recorded using low dose microscopy and diffraction. The resolution obtained in two cases was 7 and 4 A, thus showing the suitability of this specimen for high-resolution studies. Seven of the best images and three of the best electron diffraction patterns were analysed semiquantitatively. The best image showed the presence of two connectors per unit cell (165 A x 165 A), each having an internal 4-fold axis and being related to one-another by 2-fold and 2-fold screw axes in the space group p42(1)2. Internal phase comparison within the best image showed good phase residuals for p42(1)2 and all its sub-groups. The other images were consistent with this interpretation taking into consideration the possible crystal tilt and specimen drift. We conclude that the most likely crystal space group is p42(1)2. Electron diffraction patterns were consistent with this assignment, but none of the patterns showed the precise 422 symmetry expected, almost certainly because the crystals were slightly tilted (2 to 5 degrees).

Electron cryo-microscopic analysis of crystalline cytochrome oxidase.

The structure of cytochrome oxidase from beef heart mitochondria has been analysed by cryo-electron microscopy of vesicle crystals of the space group p22(1)2(1), with cell dimensions a = 102 A, b = 123 A, gamma = 90 degrees. Several methods of specimen preparation were applied to the vesicular two-dimensional crystals in the electron microscope, to ensure that the structure was preserved to the maximum resolution. The two most informative density maps were from specimens embedded in ice and from negative staining in a 1:1 mixture of glucose and uranyl acetate. The three-dimensional structure of the ice-embedded molecule shows a single, well resolved, but convoluted density, which represents in size and shape one cytochrome oxidase dimer. At the bottom of the molecule, a substantial part of the protein is embedded in the lipid bilayer of the vesicle. The molecule then extends upwards, out of the bilayer, into the internal space within the vesicle. Here, the structure first passes through a region within the molecule containing a hollow cavity that lies roughly at the centre of mass of the dimer, and then branches into two well-resolved halves at some distance from the membrane. The negatively stained structure, in contrast, shows a stain-excluding region in the centre of the vesicle at the level of the cavity in the ice-embedded structure, but otherwise has a similar overall external shape. In addition, there is a small rotation of the whole molecule by approximately 25 degrees relative to the orientation of ice-embedded specimens. We interpret these differences to mean that the central cavity seen in the ice-embedded structure is too small to allow the stain to penetrate during the drying process and that the drying process causes the rotation. The structures described here are consistent with one another and allow an interpretation at higher resolution than from previous work.

Three-dimensional structure of T3 connector purified from overexpressing bacteria.

The bacteriophage T3 connector has been purified from overexpressed protein in Escherichia coli, harboring a plasmid containing the gene encoding p8 protein. The connector, which is composed of 12 copies of p8, has been crystallized in two-dimensional sheets and studied by electron microscopy from negatively stained specimens. A two-dimensional Fourier filtering and averaging procedure was performed with crystalline specimens. In addition, single particle averaging techniques were used with other preparations. The average images obtained from these two approaches gave similar results. A three-dimensional reconstruction from two-dimensional crystals of T3 connectors was obtained by collecting several sets of tilted views and using standard Fourier procedures. The resolution of the three-dimensional map was 1.65 nm. The reconstructed connector shows two main domains: a wider one with 12 small units in the periphery and with an external diameter of 14.9 nm, and a smaller one with 8.5 nm diameter. The height of the reconstructed connector has been determined to be around 8.5 nm. The reconstruction clearly shows an internal open channel running along the longitudinal axis of the particle and having an average diameter of 3.7 nm.

Topology of the components of the DNA packaging machinery in the phage phi29 prohead.

Chromosome condensation inside dsDNA viral particles is a complex process requiring the coordinated action of several viral components. The similarity of the process in different viral systems has led to the suggestion that there is a common underlying mechanism for DNA packaging, in which the portal vertex or connector plays a key role. We have studied the topology of the packaging machinery using a number of antibodies directed against different domains of the connector. The charged amino-terminal, the carboxyl-terminal, and the RNA binding domain are accessible areas in the connector assembled into the prohead, while the domains corresponding to the 12 large appendages of the connector are buried inside the prohead. Furthermore, while the antibodies against the carboxyl and amino-terminal do not affect the packaging reaction, incubation of proheads with antibodies against the RNA binding domain abolishes the packaging activity. The comparison of the three-dimensional reconstructions of bacteriophage phi29 proheads with proheads devoid of their specific pRNA by RNase treatment shows that this treatment removes structural elements of the distal vertex of the portal structure, suggesting that the pRNA required for packaging is located at the open gate of the channel in the narrow side of the connector.

Crystallographic analysis reveals the 12-fold symmetry of the bacteriophage phi29 connector particle.

The internal symmetry of the connector or portal particle from the double-stranded DNA bacteriophage phi29 has been examined by X-ray crystallography. This large multimeric structure (420 kDa) is built up by a number of identical subunits of the p10 protein. It connects the head of the virus with the tail and plays a central role in the prohead assembly and DNA packaging. For the first time a bacteriophage connector has been crystallized and X-ray data have been collected up to a resolution of 3.2 A. A self-rotation function has been calculated, unambigously revealing the 12-fold symmetry of the particle and its orientation in the crystal lattice. The orientation has been confirmed by calculating a cross-rotation function using a low resolution model based on electron microscopy reconstructions.

Domain architecture of the bacteriophage phi29 connector protein.

Viral connectors are essential components of the DNA packaging machinery. They interact with nucleic acids and other viral components to translocate DNA inside the viral head. We have attempted to locate the different structural and functional domains of the phage Phi29 connector using a combination of approaches to generate different antigenic probes. Complexes of native connectors with either monoclonal or monospecific antibodies were studied by immunoelectron microscopy and image averaging methods. The data were merged in a model of the connector domain structure at 2-3 nm resolution. This epitope mapping provides a general outline of the folding architecture of the connector polypeptide, following a complicated threading that places the amino and carboxyl-terminals in close alignment in the narrower domain at 2-3 nm from the top of the connector. The appendages are built up by a long and highly immunogenic sequence (amino acid residues 153 to 206). The RNA binding domain forms part of the top of the narrow conical area of the connector, a flexible region that undergoes structural changes during viral morphogenesis. The DNA binding domain is located not far away, 2-3 nm below, in the outer side of the narrow conical part. The precise location of the functional domains of the connector, as well as their relative positions provide the first experimental framework for understanding the connector function.

Selection of antibody probes to correlate protein sequence domains with their structural distribution.

We propose a new approach that permits correlation of specific domains defined by their primary sequence with their location in the structure of complex macromolecular aggregates. It is based on the combination of well-established structural analysis methods that incorporate the use of overlapping peptides on cellulose membranes for the isolation and purification of specific antibodies from a polyclonal antiserum. Monospecific antibodies to the connector protein of bacteriophage phi29 were isolated from polyclonal antisera using a new development of the spotscan method. These antibodies can be purified in quantities that allow antigenicity testing in enzyme-linked immunosorbent assays, Western blotting and immunoprecipitations, demonstrating the specificity of this isolation procedure. This approach has allowed us to generate direct antibody probes for immunoelectron microscopy mapping of different connector protein domains in a low resolution three-dimensional epitope map.

The formation of symmetrical GroEL-GroES complexes in the presence of ATP.

The incubation of chaperonins cpn60 (GroEL) and cpn10 (GroES) from E. coli in the presence of Mg-ATP and KCl generates the formation, as revealed by electron microscopy, of GroEL-GroES complexes with a symmetrical shape in which one toroidal GroES oligomer is bound to each end of the tetradecameric GroEL aggregate (1:2 GroEL:GroES oligomer molar ratio). The symmetrical complexes are not observed in the presence of ADP or the non-hydrolyzable ATP analog, ATP gamma S, where only asymmetrical complexes (1:1 GroEL:GroES oligomer molar ratio) are formed. These results suggest that ATP hydrolysis is required for the formation of symmetrical complexes.

Symmetric GroEL-GroES complexes can contain substrate simultaneously in both GroEL rings.

Incubation of rhodanese with hche aperonins GroEL and GroES (1:2 GroEL14:GroES7 molar ratio) under functional and steady state conditions for ATP leads to the formation of a high proportion of rhodanese-bound symmetric complexes (GroEL14(GroES7)2), as revealed by native electrophoresis. Aliquots of such samples were observed under the electron microscope, and the symmetric particles were classified using neuronal networks and multivariate statistical analysis. Three different populations of symmetric particles were obtained which contained substrate in none, one or both GroEL cavities, respectively. The presence of substrate in the symmetric complexes under functional conditions supports their role as active intermediates in the protein folding cycle. These results also suggest that symmetric GroEL-GroES complexes can use both rings simultaneously for folding, probably increasing the efficiency of the reaction.

Purification, crystallization and preliminary X-ray diffraction studies of the bacteriophage phi29 connector particle.

The connector or portal particle from double-stranded DNA bacteriophage phi29 has been crystallized. This structure, which connects the head of the virus with the tail and plays a central role in prohead assembly and DNA packaging and translocation, is formed by 12 subunits of the p10 protein and has a molecular weight of 430 kDa. The connector structure was proteolysed with endoproteinase Glu-C from Staphylococcus aureus V8, which removes 13 and 18 amino acids from the amino- and carboxy-terminal regions of the p10 protein, respectively. Two crystal forms were grown from drops containing an alcohol solution and paraffin oil. Crystals of form I are monoclinic, space group C2 with cell dimensions a = 416.86 A, b = 227.62 A, c = 236.68 A and beta = 96.3 degrees and contain four connector particles per asymmetric unit. Crystals of form II are tetragonal, space group P4(2)2(1)2 with cell dimensions a = b = 170.2 A, c = 156.9 A and contain half a particle per asymmetric unit. X-ray diffraction data from both native crystal forms have been collected to 6.0 and 3.2 A respectively, using synchrotron radiation. Crystals of form II are likely to have the same packing arrangement as the two-dimensional crystals analyzed previously by electron microscopy.