Atomic layer deposition of high-k dielectrics on single-walled carbon nanotubes: a Raman study.

Single-wall carbon nanotubes (SWCNTs) have great potential to become the channel material for future high-speed transistor technology. However, to realize a carbon nanotube field effect transistor (CNTFET) with excellent gate control, the high-k dielectrics between the CNT and the metal gate must have superb electrical properties and extremely high uniformity. Thus it is essential to understand the interactions between high-k materials and the SWCNTs to effectively control the transistor characteristics. In this study, we investigate the effects of atomic layer deposited (ALD) high-k dielectrics (Al2O3 and HfO2) on SWCNTs using Raman spectroscopy. We subjected the SWCNTs to various ALD cycles and studied the nucleation and growth of ALD dielectrics at defect sites using scanning electron microscopy and transmission electron microscopy images. We analyzed these samples using Raman spectroscopy and x-ray photoelectron spectroscopy. The Raman peak shifts of the G-peak and the 2D (G') peaks suggest doping and stress induced effects on the CNTs by the surrounding high-k oxide environment. Trends in the G-peak FWHM and G/D-peak ratios were identified and compared between Al2O3 and HfO2. We confirmed the ALD-deposited HfO2 is polycrystalline using x-ray diffraction and analyzed dielectric-CNT bonding states using XPS measurements. This study provides insights on the effects of ALD high-k materials on SWCNTs for future high-speed transistor applications.

Microwave Characterization of Ba-Substituted PZT and ZnO Thin Films.

The microwave dielectric properties of (Ba0.1Pb0.9)(Zr0.52Ti0.48)O3 (BPZT) and ZnO thin films with thicknesses below were investigated. No significant dielectric relaxation was observed for both BPZT and ZnO up to 30 GHz. The intrinsic dielectric constant of BPZT was as high as 980 at 30 GHz. The absence of strong dielectric dispersion and loss peaks in the studied frequency range can be linked to the small grain diameters in these ultrathin films.

Graphene oxide monolayers as atomically thin seeding layers for atomic layer deposition of metal oxides.

Graphene oxide (GO) was explored as an atomically-thin transferable seed layer for the atomic layer deposition (ALD) of dielectric materials on any substrate of choice. This approach does not require specific chemical groups on the target surface to initiate ALD. This establishes GO as a unique interface which enables the growth of dielectric materials on a wide range of substrate materials and opens up numerous prospects for applications. In this work, a mild oxygen plasma treatment was used to oxidize graphene monolayers with well-controlled and tunable density of epoxide functional groups. This was confirmed by synchrotron-radiation photoelectron spectroscopy. In addition, density functional theory calculations were carried out on representative epoxidized graphene monolayer models to correlate the capacitive properties of GO with its electronic structure. Capacitance-voltage measurements showed that the capacitive behavior of Al2O3/GO depends on the oxidation level of GO. Finally, GO was successfully used as an ALD seed layer for the deposition of Al2O3 on chemically inert single layer graphene, resulting in high performance top-gated field-effect transistors.

Influence of carbon alloying on the thermal stability and resistive switching behavior of copper-telluride based CBRAM cells.

We report the improved thermal stability of carbon alloyed Cu0.6Te0.4 for resistive memory applications. Copper-tellurium-based memory cells show enhanced switching behavior, but the complex sequence of phase transformations upon annealing is disadvantageous for integration in a device. We show that addition of about 40 at % carbon to the Cu-telluride layer results in an amorphous material up to 360 °C. This material was then integrated in a TiN/Cu0.6Te0.4-C/Al2O3/Si resistive memory cell, and compared to pure Cu0.6Te0.4. Very attractive endurance (up to 1 × 10(3) cycles) and retention properties (up to 1 × 10(4) s at 85 °C) are observed. The enhanced thermal stability and good switching behavior make this material a promising candidate for integration in memory devices.

Ultrathin NiGe films prepared via catalytic solid-vapor reaction of Ni with GeH(4).

A low-temperature (225-300 °C) solid-vapor reaction process is reported for the synthesis of ultrathin NiGe films (∼6-23 nm) on 300 mm Si wafers covered with thermal oxide. The films were prepared via catalytic chemical vapor reaction of germane (GeH4) gas with physical vapor deposited (PVD) Ni films of different thickness (2-10 nm). The process optimization by investigating GeH4 partial pressure, reaction temperature, and time shows that low resistive, stoichiometric, and phase pure NiGe films can be formed within a broad window. NiGe films crystallized in an orthorhombic structure and were found to exhibit a smooth morphology with homogeneous composition as evidenced by glancing angle X-ray diffraction (GIXRD), scanning electron microscopy (SEM), atomic force microscopy (AFM), and Rutherford back-scattering (RBS) analysis. Transmission electron microscopy (TEM) analysis shows that the NiGe layers exhibit a good adhesion without voids and a sharp interface on the thermal oxide. The NiGe films were found to be morphologically and structurally stable up to 500 °C and exhibit a resistivity value of 29 µΩ cm for 10 nm NiGe films.