3MSF: A Multi-Modal Adaptation of the 6TiSCH Minimal Scheduling Function for the Industrial IoT.

Although wireless devices continuously gain communication capabilities, even state-of-the-art Industrial Internet of Things (IIoT) architectures, such as Internet Protocol version 6 over the Time-Slotted Channel Hopping (TSCH) mode of IEEE 802.15.4 (6TiSCH), continue to use network-wide, fixed link configurations. This presents a missed opportunity to (1) forego the need for rigorous manual setup of new deployments; and (2) provide full coverage of particularly heterogeneous and/or dynamic industrial sites. As such, we devised the Multi-Modal Minimal Scheduling Function (3MSF) for the TSCH link layer, which, combined with previous work on the routing layer, results in a 6TiSCH architecture able to dynamically exploit modern multi-modal hardware on a per-link basis through variable-duration timeslots, simultaneous transmission, and routing metric normalization. This paper describes, in great detail, its design and discusses the rationale behind every choice made. Finally, we evaluate three basic scenarios through simulations, showcasing both the functionality and flexibility of our 6TiSCH implementation.

Parent and PHY Selection in Slot Bonding IEEE 802.15.4e TSCH Networks.

While IEEE 802.15.4e Time-Slotted Channel Hopping (TSCH) networks should be equipped to deal with the hard wireless challenges of industrial environments, the sensor networks are often still limited by the characteristics of the used physical (PHY) layer. Therefore, the TSCH community has recently started shifting research efforts to the support of multiple PHY layers, to overcome this limitation. On the one hand, integrating such multi-PHY support implies dealing with the PHY characteristics to fit the resource allocation in the TSCH schedule, and on the other hand, defining policies on how to select the appropriate PHY for each network link. As such, first a heuristic is proposed that is a step towards a distributed PHY and parent selection mechanism for slot bonding multi-PHY TSCH sensor networks. Additionally, a proposal on how this heuristic can be implemented in the IPv6 over the TSCH mode of IEEE 802.15.4e (6TiSCH) protocol stack and its Routing Protocol for Low-power and Lossy network (RPL) layer is also presented. Slot bonding allows the creation of different-sized bonded slots with a duration adapted to the data rate of each chosen PHY. Afterwards, a TSCH slot bonding implementation is proposed in the latest version of the Contiki-NG Industrial Internet of Things (IIoT) operating system. Subsequently, via extensive simulation results, and by deploying the slot bonding implementation on a real sensor node testbed, it is shown that the computationally efficient parent and PHY selection mechanism approximates the packet delivery ratio (PDR) results of a near-optimal, but computationally complex, centralized scheduler.

Return to Work after Primary Total Knee Arthroplasty under the Age of 65 Years: A Systematic Review.

A growing number of patients undergoing total knee arthroplasty (TKA) is at working age and need to return to work (RTW) after surgery. The aim of this systematic review is to give an overview of the literature regarding RTW after TKA and beneficial and limiting factors influencing this process. A systematic search in four electronic databases was conducted in November 2019 to identify studies describing RTW after primary TKA in patients aged 65 years or younger. Study characteristics and data on work status before and after surgery were extracted. All studies were assessed for risk of bias. Fourteen studies published between 2009 and 2019 were included in this review, accounting for a total of 3,073 patients. The percentage of patients working after TKA ranged from 36 to 89%, and the fraction of patients working before and returning to work after surgery ranged from 40 to 98%. Mean time of RTW ranged from 7.7 to 16.6 weeks. Most important factors associated with a slower or no RTW were a more physical nature of employment and preoperative absence from work. The majority of patients undergoing TKA returned to work postoperatively. However, comparison between studies is seriously hampered by the wide variation regarding the definition and timeframe used to measure the work status. Therefore, standardized outcome measures for studies investigating RTW after TKA are warranted. We identify this review as level-I evidence (systematic review of level-I and level-II studies).