RESUMO
Biogenic catalysts have been studied over the last 10 years in freshwater and soil environments, but neither their formation nor their application has been explored in marine ecosystems. The objective of this study was to develop a biogenic nanopalladium-based remediation method for reducing chlorinated hydrocarbons from marine environments by employing indigenous marine bacteria. Thirty facultative aerobic marine strains were isolated from two contaminated sites, the Lagoon of Mar Chica, Morocco, and Priolo Gargallo Syracuse, Italy. Eight strains showed concurrent palladium precipitation and biohydrogen production. X-ray diffraction and thin section transmission electron microscopy analysis indicated the presence of metallic Pd nanoparticles of various sizes (5-20 nm) formed either in the cytoplasm, in the periplasmic space, or extracellularly. These biogenic catalysts were used to dechlorinate trichloroethylene in simulated marine environments. Complete dehalogenation of 20 mg L(-1) trichloroethylene was achieved within 1 h using 50 mg L(-1) biogenic nanopalladium. These biogenic nanoparticles are promising developments for future marine bioremediation applications.
Assuntos
Desulfovibrio desulfuricans/metabolismo , Hidrocarbonetos Clorados/isolamento & purificação , Nanopartículas Metálicas/química , Paládio/química , Shewanella/metabolismo , Poluentes Químicos da Água/isolamento & purificação , Biodegradação Ambiental , Catálise , Halogenação , Itália , Microscopia Eletrônica de Transmissão , Paládio/isolamento & purificação , Tamanho da Partícula , Tricloroetileno/isolamento & purificação , Microbiologia da Água , Difração de Raios XRESUMO
A new biological inspired method to produce nanopalladium is the precipitation of Pd on a bacterium, i.e., bio-Pd. This bio-Pd can be applied as catalyst in dehalogenation reactions. However, large amounts of hydrogen are required as electron donor in these reactions resulting in considerable costs. This study demonstrates how bacteria, cultivated under fermentative conditions, can be used to reductively precipitate bio-Pd catalysts and generate the electron donor hydrogen. In this way, one could avoid the costs coupled to hydrogen supply. The catalytic activities of Pd(0) nanoparticles produced by different strains of bacteria (bio-Pd) cultivated under fermentative conditions were compared in terms of their ability to dehalogenate the recalcitrant aqueous pollutants diatrizoate and trichloroethylene. While all of the fermentative bio-Pd preparations followed first order kinetics in the dehalogenation of diatrizoate, the catalytic activity differed systematically according to hydrogen production and starting Pd(II) concentration in solution. Batch reactors with nanoparticles formed by Citrobacter braakii showed the highest diatrizoate dehalogenation activity with first order constants of 0.45 ± 0.02 h⻹ and 5.58 ± 0.6 h⻹ in batches with initial concentrations of 10 and 50 mg L⻹ Pd, respectively. Nanoparticles on C. braakii, used in a membrane bioreactor treating influent containing 20 mg L⻹ diatrizoate, were capable of dehalogenating 22 mg diatrizoate mg⻹ Pd over a period of 19 days before bio-Pd catalytic activity was exhausted. This study demonstrates the possibility to use the combination of Pd(II), a carbon source and bacteria under fermentative conditions for the abatement of environmental halogenated contaminants.
Assuntos
Bactérias/metabolismo , Diatrizoato/metabolismo , Recuperação e Remediação Ambiental/métodos , Hidrogênio/metabolismo , Nanopartículas Metálicas/química , Paládio/química , Poluentes Químicos da Água/metabolismo , Bactérias/química , Biodegradação Ambiental , Reatores Biológicos/microbiologia , Catálise , Recuperação e Remediação Ambiental/instrumentação , Fermentação , Cinética , Nanopartículas Metálicas/microbiologia , Oxirredução , Paládio/metabolismoRESUMO
Autotrophic denitrification with sulfur is an underexplored alternative to heterotrophic denitrification to remove nitrate from wastewater poor in organics. The application on ion exchange regeneration water (19.4-32.1â¯mSâ¯cm-1) is novel. Three fixed bed reactors were tested at 15⯰C for >4â¯months, inoculated with activated sludge from sewage treatment. All were fast in start-up (<10â¯days) with high performance (94⯱â¯2% removal efficiency). pH control with NaOH rendered higher nitrate removal rates than limestone addition to the bed (211⯱â¯13 vs. 102⯱â¯13â¯mgâ¯Nâ¯L-1â¯d-1), related to higher pH (6.64 vs. 6.24) and sulfur surface area. Bacterial communities were strongly enriched in Sulfurimonas (63-67%) and Thiobacillus (24-26%). In an economic comparison, sulfur-based denitrification (5.3â¯kg-1â¯N) was 15% cheaper than methanol-based denitrification (6.22â¯kg-1â¯N) and both treatments were opex dominated (85.9 vs. 86.5%). Overall, the technological and economic feasibility should boost further implementation of sulfurotrophic denitrification.
Assuntos
Reatores Biológicos , Desnitrificação , Enxofre , Processos Autotróficos , Troca Iônica , Nitratos , Regeneração , Água , Purificação da ÁguaRESUMO
Drinking water networks need maintenance every once in a while, either planned interventions or emergency repairs. When this involves opening of the water pipes, precautionary measures need to be taken to avoid contamination of the drinking water at all time. Drinking water suppliers routinely apply plating for faecal indicator organisms as quality control in such a situation. However, this takes at least 21 h of waiting time, which can be crucial when dealing with major supply pipes. A combination of flow cytometric (FCM) bacterial cell counts with FCM fingerprinting techniques is proposed in this study as a fast and sensitive additional technique. In three full scale situations, major supply pipes with 400-1050 mm diameter were emptied for maintenance, shock-chlorinated and flushed with large amounts of clean drinking water before taking back in operation. FCM measurements of the discharged flushing water revealed fast lowering and stabilizing bacterial concentrations once flushing is initiated. Immediate comparison with clean reference drinking water used for flushing was done, and the moment when both waters had similar bacterial concentrations was considered as the endpoint of the necessary flushing works. This was usually after 2-4 h of flushing. FCM fingerprinting, based on both bacteria and FCM background, was used as additional method to verify how similar flushing and reference samples were and yielded similar results. The FCM approved samples were several hours later approved as well by the drinking water supplier after plating and incubation for total Coliforms and Enterococci. These were used as decisive control to set the pipes back in operation. FCM proved to be a more conservative test than plating, yet it yielded immediate results. Application of these FCM methods can therefore avoid long unnecessary waiting times and large drinking water losses.
Assuntos
Água Potável/microbiologia , Citometria de Fluxo , Seguimentos , Microbiologia da Água , Abastecimento de ÁguaRESUMO
Household washing machines (WMs) launder soiled clothes and textiles, but do not sterilize them. We investigated the microbial exchange occurring in five household WMs. Samples from a new cotton T-shirt were laundered together with a normal laundry load. Analyses were performed on the influent water and the ingoing cotton samples, as well as the greywater and the washed cotton samples. The number of living bacteria was generally not lower in the WM eï¬uent water as compared to the influent water. The laundering process caused a microbial exchange of influent water bacteria, skin-, and clothes-related bacteria and biofilm-related bacteria in the WM. A variety of biofilm-producing bacteria were enriched in the eï¬uent after laundering, although their presence in the cotton sample was low. Nearly all bacterial genera detected on the initial cotton sample were still present in the washed cotton samples. A selection for typical skin- and clothes-related microbial species occurred in the cotton samples after laundering. Accordingly, malodour-causing microbial species might be further distributed to other clothes. The bacteria on the ingoing textiles contributed for a large part to the microbiome found in the textiles after laundering.
RESUMO
In drinking water (DW) and the distribution systems, bacterial growth and biofilm formation have to be controlled both for limiting taste or odour development and preventing clogging or biocorrosion problems. After a contamination with undesired bacteria, factors like nutrient availability and temperature will influence the survival of these invaders. Understanding the conditions enabling invaders to proliferate is essential for a holistic approach towards microbial risk assessment in DW. Pseudomonas putida was used as a model invader because this easy-growing bacterium can use a wide range of substrates. Invasion experiments in oligo- to eutrophic waters showed the requirement of both a carbon and phosphate source for survival of P. putida in DW. Addition of C, N and P enabled P. putida to grow in DW from 5.80 × 10(4) to 1.84 × 10(8) cells mL(-1) and survive for at least 12 days. However, in surface water with similar nutrient concentrations, P. putida did not survive, indicating the concomitant importance of the present indigenous microbial community of the specific water sample. Either extensive carbon or phosphate limitation can be used in water treatment design in order to obtain a DW which is not susceptible for unwanted bacterial growth.
Assuntos
Água Potável/microbiologia , Pseudomonas putida/crescimento & desenvolvimento , Microbiologia da Água , Acetatos/metabolismo , Carbono/metabolismo , Interações Microbianas , Viabilidade Microbiana , Nitrogênio/metabolismo , Fosfatos/metabolismo , Pseudomonas putida/metabolismo , Purificação da ÁguaRESUMO
The impact of multi-well plate automation on bacterial flow cytometric analyses was investigated. Cell concentrations in up to 96 samples can be measured accurately, as long as a reproducible staining protocol and a total measurement time of below 80 min is used. Fluorescence distribution in the samples may, however, display some variability.
Assuntos
Automação/métodos , Bactérias/citologia , Citometria de Fluxo/métodos , Automação/instrumentação , Bactérias/química , Citometria de Fluxo/instrumentação , FluorescênciaRESUMO
In this study, trace organics transport in closed-loop forward osmosis (FO) systems was assessed. The FO systems considered, consisted of an FO unit and a nanofiltration (NF) or reverse osmosis (RO) unit, with the draw solution circulating between both units. The rejection of trace organics by FO, NF and RO was tested. It was found that the rejection rates of FO were generally comparable with NF and lower than RO rejection rates. To assess the influence of fouling in FO on trace organics rejection, FO membranes were fouled with sodium alginate, bovine serum albumin or by biofilm growth, after which trace organics rejection was tested. A negative influence of fouling on FO rejection was found which was limited in most cases, while it was significant for some compounds such as paracetamol and naproxen, indicating specific compound-foulant interactions. The transport mechanism of trace organics in FO was tested, in order to differentiate between diffusive and convective transport. The concentration of trace organics in the final product water and the build-up of trace organics in the draw solution were modeled assuming the draw solution was reconcentrated by NF/RO and taking into account different transport mechanisms for the FO membrane and different rejection rates by NF/RO. Modeling results showed that if the FO rejection rate is lower than the RO rejection rate (as is the case for most compounds tested), the added value of the FO-RO cycle compared to RO only at steady-state was small for diffusively and negative for convectively transported trace organics. Modeling also showed that trace organics accumulate in the draw solution.
Assuntos
Incrustação Biológica , Osmose , Purificação da Água/instrumentação , Purificação da Água/métodos , Biofilmes , Desenho de Equipamento , Filtração/métodos , Membranas Artificiais , Microscopia Eletrônica de Varredura , Modelos Teóricos , Nanotecnologia/métodos , Preparações Farmacêuticas/químicaRESUMO
Transparent exopolymer particles (TEP) have recently gained interest in relation to membrane fouling. These sticky, gel-like particles consist of acidic polysaccharides excreted by bacteria and algae. The concentrations, expressed as xanthan gum equivalents L⻹ (µg X(eq) L⻹), usually reach hundred up to thousands µg X(eq) L⻹ in natural waters. However, very few research was performed on the occurrence and fate of TEP in drinking water, this far. This study examined three different drinking water production centers, taking in effluent of a sewage treatment plant (STP), surface water and groundwater, respectively. Each treatment step was evaluated on TEP removal and on 13 other chemical and biological parameters. An assessment on TEP removal efficiency of a diverse range of water treatment methods and on correlations between TEP and other parameters was performed. Significant correlations between particulate TEP (>0.4 µm) and viable cell concentrations were found, as well as between colloidal TEP (0.05-0.4 µm) and total COD, TOC, total cell or viable cell concentrations. TEP concentrations were very dependent on the raw water source; no TEP was detected in groundwater but the STP effluent contained 1572 µg X(eq) L⻹ and the surface water 699 µg X(eq) L⻹. Over 94% of total TEP in both plants was colloidal TEP, a fraction neglected in nearly every other TEP study. The combination of coagulation and sand filtration was effective to decrease the TEP levels by 67%, while the combination of ultrafiltration and reverse osmosis provided a total TEP removal. Finally, in none of the installations TEP reached the final drinking water distribution system at significant concentrations. Overall, this study described the presence and removal of TEP in drinking water systems.