Design of a novel continuous flow reactor for low pH viral inactivation.

Insufficient mixing in laminar flow reactors due to diffusion-dominated flow limits their use in applications where narrow residence time distribution (RTD) is required. The aim of this study was to design and characterize a laminar flow (Re 187.7-375.5) tubular reactor for low pH viral inactivation with enhanced radial mixing via the incorporation of curvature and flow inversions. Toward this aim, the reactor described here, Jig in a Box (JIB), was designed with a flow path consisting of alternating 270° turns. The design was optimized by considering the strength of secondary flows characterized by the Dean No., the corresponding secondary flow development length, and the reactor turn lengths. Comprehensive CFD analysis of the reactor centerline velocity profile, cross-sectional velocity, and secondary flow streamlines confirmed enhanced radial mixing due to secondary flows and changes in flow direction. For initial CFD and experimental studies the reactor was limited to a 16.43 m length. Pulse tracer studies for the reactor were computationally simulated and experimentally generated to determine the RTD, RTD variance, and minimum residence time for the tracer fluid elements leaving the reactor, as well as to validate the computational model. The reactor was scaled length wise to increase incubation time and it was observed that as the reactor length increases the RTD variance increases linearly and the dimensionless RTD profile becomes more symmetrical and tighter about the mean residence time.

Novel low shear 3D bioreactor for high purity mesenchymal stem cell production.

Bone marrow derived human Mesenchymal Stem Cells (hMSCs) are an attractive candidate for regenerative medicine. However, their harvest can be invasive, painful, and expensive, making it difficult to supply the enormous amount of pure hMSCs needed for future allogeneic therapies. Because of this, a robust method of scaled bioreactor culture must be designed to supply the need for high purity, high density hMSC yields. Here we test a scaled down model of a novel bioreactor consisting of an unsubmerged 3D printed Polylactic Acid (PLA) lattice matrix wetted by culture media. The growth matrix is uniform, replicable, and biocompatible, enabling homogenous cell culture in three dimensions. The goal of this study was to prove that hMSCs would culture well in this novel bioreactor design. The system tested resulted in comparable stem cell yields to other cell culture systems using bone marrow derived hMSCs, while maintaining viability (96.54% ±2.82), high purity (>98% expression of combined positive markers), and differentiation potential.