RESUMO
Integrated CO2 capture and utilization (ICCU) technology requires dual functional materials (DFMs) to carry out the process in a single reaction system. The influence of the calcination atmosphere on efficiency of 4% Ru-8% Na2CO3-8% CaO/γ-Al2O3 DFM is studied. The adsorbent precursors are first co-impregnated onto alumina and calcined in air. Then, Ru precursor is impregnated and four aliquotes are subjected to different calcination protocols: static air in muffle or under different mixtures (10% H2/N2, 50% H2/N2 and N2) streams. Samples are characterized by XRD, N2 adsorption-desorption, H2 chemisorption, TEM, XPS, H2-TPD, H2-TPR, CO2-TPD and TPSR. The catalytic behavior is evaluated, in cycles of CO2 adsorption and hydrogenation to CH4, and temporal evolution of reactants and products concentrations is analyzed. The calcination atmosphere influences the physicochemical properties and, ultimately, activity of DFMs. Characterization data and catalytic performance discover the acccomodation of Ru nanoparticles disposition and basic sites is mostly influencing the catalytic activity. DFM calcined under N2 flow (RuNaCa-N2) shows the highest CH4 production (449 µmol/g at 370°C), because a well-controlled decomposition of precursors which favors the better accomodation of adsorbent and Ru phases, maximizing the specific surface area, the Ru-basic sites interface and the participation of different basic sites in the CO2 methanation reaction. Thus, the calcination in a N2 flow is revealed as the optimal calcination protocol to achieve highly efficient DFM for integrated CO2 adsorption and hydrogenation applications.
Assuntos
Óxido de Alumínio , Dióxido de Carbono , Adsorção , Hidrogenação , Atmosfera , ÍonsRESUMO
Internet growth has generated new types of services where the use of sensors and actuators is especially remarkable. These services compose what is known as the Internet of Things (IoT). One of the biggest current challenges is obtaining a safe and easy access control scheme for the data managed in these services. We propose integrating IoT devices in an access control system designed for Web-based services by modelling certain IoT communication elements as resources. This would allow us to obtain a unified access control scheme between heterogeneous devices (IoT devices, Internet-based services, etc.). To achieve this, we have analysed the most relevant communication protocols for these kinds of environments and then we have proposed a methodology which allows the modelling of communication actions as resources. Then, we can protect these resources using access control mechanisms. The validation of our proposal has been carried out by selecting a communication protocol based on message exchange, specifically Message Queuing Telemetry Transport (MQTT). As an access control scheme, we have selected User-Managed Access (UMA), an existing Open Authorization (OAuth) 2.0 profile originally developed for the protection of Internet services. We have performed tests focused on validating the proposed solution in terms of the correctness of the access control system. Finally, we have evaluated the energy consumption overhead when using our proposal.
RESUMO
Intelligent transportation systems are a set of technological solutions used to improve the performance and safety of road transportation. A crucial element for the success of these systems is the exchange of information, not only between vehicles, but also among other components in the road infrastructure through different applications. One of the most important information sources in this kind of systems is sensors. Sensors can be within vehicles or as part of the infrastructure, such as bridges, roads or traffic signs. Sensors can provide information related to weather conditions and traffic situation, which is useful to improve the driving process. To facilitate the exchange of information between the different applications that use sensor data, a common framework of knowledge is needed to allow interoperability. In this paper an ontology-driven architecture to improve the driving environment through a traffic sensor network is proposed. The system performs different tasks automatically to increase driver safety and comfort using the information provided by the sensors.
RESUMO
In this paper, we describe the design considerations and implementation of a smart toy system, a technology for supporting the automatic recording and analysis for detecting developmental delays recognition when children play using the smart toy. To achieve this goal, we take advantage of the current commercial sensor features (reliability, low consumption, easy integration, etc.) to develop a series of sensor-based low-cost devices. Specifically, our prototype system consists of a tower of cubes augmented with wireless sensing capabilities and a mobile computing platform that collect the information sent from the cubes allowing the later analysis by childhood development professionals in order to verify a normal behaviour or to detect a potential disorder. This paper presents the requirements of the toy and discusses our choices in toy design, technology used, selected sensors, process to gather data from the sensors and generate information that will help in the decision-making and communication of the information to the collector system. In addition, we also describe the play activities the system supports.
Assuntos
Monitorização Fisiológica/métodos , Criança , Desenho de Equipamento , Humanos , Monitorização Fisiológica/instrumentação , Jogos e Brinquedos , Tecnologia sem Fio/instrumentaçãoRESUMO
Sensor networks are a concept that has become very popular in data acquisition and processing for multiple applications in different fields such as industrial, medicine, home automation, environmental detection, etc. Today, with the proliferation of small communication devices with sensors that collect environmental data, semantic Web technologies are becoming closely related with sensor networks. The linking of elements from Semantic Web technologies with sensor networks has been called Semantic Sensor Web and has among its main features the use of ontologies. One of the key challenges of using ontologies in sensor networks is to provide mechanisms to integrate and exchange knowledge from heterogeneous sources (that is, dealing with semantic heterogeneity). Ontology alignment is the process of bringing ontologies into mutual agreement by the automatic discovery of mappings between related concepts. This paper presents a system for ontology alignment in the Semantic Sensor Web which uses fuzzy logic techniques to combine similarity measures between entities of different ontologies. The proposed approach focuses on two key elements: the terminological similarity, which takes into account the linguistic and semantic information of the context of the entity's names, and the structural similarity, based on both the internal and relational structure of the concepts. This work has been validated using sensor network ontologies and the Ontology Alignment Evaluation Initiative (OAEI) tests. The results show that the proposed techniques outperform previous approaches in terms of precision and recall.
Assuntos
Algoritmos , Lógica Fuzzy , Armazenamento e Recuperação da Informação/métodos , Internet/instrumentação , Semântica , Terminologia como Assunto , Transdutores , Desenho de Equipamento , Análise de Falha de Equipamento , Integração de SistemasRESUMO
The combustion of lean methane was studied over palladium, rhodium, platinum, and ruthenium catalysts supported on hydroxyapatite (HAP). The samples were prepared by wetness impregnation and thoroughly characterized by BET, XRD, UV-Vis-NIR spectroscopy, H2-TPR, OSC, CO chemisorption, and TEM techniques. It was found that the Pd/HAP and Rh/HAP catalysts exhibited a higher activity compared with Pt/HAP and Ru/HAP samples. Thus, the degree of oxidation of the supported metal under the reaction mixture notably influenced its catalytic performance. Although Pd and Rh catalysts could be easily re-oxidized, the re-oxidation of Pt and Ru samples appeared to be a slow process, resulting in small amounts of metal oxide active sites. Feeding water and CO2 was found to have a negative effect, which was more pronounced in the presence of water, on the activity of Pd and Rh catalysts. However, the inhibiting effect of CO2 and H2O decreased by increasing the reaction temperature.
RESUMO
Off-site data storage is one of the most widely used strategies in enterprises of all sizes to improve business continuity. In medium-to-large size enterprises, the off-site data storage processes are usually outsourced to specialized providers. However, outsourcing the storage of critical business information assets raises serious security considerations, some of which are usually either disregarded or incorrectly addressed by service providers. This article reviews these security considerations and presents a radio frequency identification (RFID)-based, off-site, data storage management system specifically designed to address security issues. The system relies on a set of security mechanisms or controls that are arranged in security layers or tiers to balance security requirements with usability and costs. The system has been successfully implemented, deployed and put into production. In addition, an experimental comparison with classical bar-code-based systems is provided, demonstrating the system's benefits in terms of efficiency and failure prevention.
Assuntos
Segurança Computacional , Sistemas de Gerenciamento de Base de Dados/normas , Armazenamento e Recuperação da Informação/métodos , Dispositivo de Identificação por RadiofrequênciaRESUMO
BACKGROUND: Pegboard tests are a powerful technique used by health and education professionals to evaluate manual dexterity and fine motor speed, both in children and adults. Using traditional pegboards in tests, the total time that, for example, a 4-year-old child needs for inserting pegs in a pegboard, with the left or right hand, can be measured. However, these measurements only allow for studying the variability among individuals, whereas no data can be obtained on the intraindividual variability in inserting and removing these pegs with one and the other hand. OBJECTIVE: The aim of this research was to study the intraindividual variabilities in fine manual motor skills of 2- to 3-year-old children during playing activities, using a custom designed electronic pegboard. METHODS: We have carried out a pilot study with 39 children, aged between 25 and 41 months. The children were observed while performing a task involving removing 10 pegs from 10 holes on one side and inserting them in 10 holes on the other side of a custom-designed sensor-based electronic pegboard, which has been built to be able to measure the times between peg insertions and removals. RESULTS: A sensor-based electronic pegboard was successfully developed, enabling the collection of single movement time data. In the piloting, a lower intraindividual variability was found in children with lower placement and removal times, confirming Adolph et al's hypothesis. CONCLUSIONS: The developed pegboard allows for studying intraindividual variability using automated wirelessly transmitted data provided by its sensors. This novel technique has been useful in studying and validating the hypothesis that children with lower movement times present lower intraindividual variability. New research is necessary to confirm these findings. Research with larger sample sizes and age ranges that include additional testing of children's motor development level is currently in preparation.
Assuntos
Jogos Recreativos , Destreza Motora/fisiologia , Pré-Escolar , Estudos de Coortes , Feminino , Mãos/fisiologia , Humanos , Masculino , Projetos PilotoRESUMO
Cu/SAPO-34 catalysts are prepared using solid-state ion exchange (SSIE) and liquid ion exchange (LIE). SSIE is conducted by calcining a physical mixture of H-SAPO-34 zeolite and CuO nanoparticles at elevated temperatures (500-800 °C). The conventional LIE method is conducted by exchanging Na-SAPO-34 with Cu(COOCH3)2 aqueous solution with a final calcination step at 500 °C. Catalysts were fully characterized, focusing on Cu species identification. The NH3-SCR activity is evaluated for NO x removal. Cu/SAPO-34 catalysts synthesized by SSIE at 700 °C achieved an optimal reaction rate, which was correlated with a higher proportion of Cu2+ ions. The activation energies of Cu/SAPO-34 catalysts prepared by SSIE and LIE with varying copper loadings are 32-38 and 42-47 kJ mol-1, respectively. The SSIE catalysts achieve higher turnover frequency than LIE catalysts for a similar copper content, which decreases on increasing the copper loading. These results provide evidence that Cu ions exchanged into the Cu/SAPO-34 catalysts synthesized by SSIE present higher activity than those prepared by LIE for NO x removal by NH3-SCR.
RESUMO
The catalytic activity and selectivity of manganese zirconia mixed oxides were evaluated for the oxidation of two common chlorinated pollutants found in waste streams, namely 1,2-dichloroethane (DCE) and trichloroethylene (TCE). Mixed oxides with varying Mn-Zr content were prepared by coprecipitation via nitrates, and subsequent calcination at 600 degrees C for 4 h in air. These catalysts were characterised by means of several techniques such as atomic emission spectrometry, N2 adsorption-desorption, powder X-ray diffraction, temperature-programmed desorption of ammonia, pyridine adsorption followed by diffuse reflectance infrared spectroscopy and temperature-programmed reduction with hydrogen. The active catalytic behaviour of Mn-Zr mixed oxides was ascribed to a substantial surface acidity combined with readily accessible active oxygen species. Hence, the mixed oxide with 40 mol% manganese content was found to be an optimum catalyst for the combustion of both chlorocarbons with a T50 value around 305 and 315 degrees C for DCE and TCE oxidation, respectively. The major oxidation products were carbon dioxide, hydrogen chloride and chlorine. It was observed that the formation of both CO2 and Cl2 was promoted with Mn loading.
Assuntos
Dicloretos de Etileno/química , Manganês/química , Óxidos/química , Tricloroetileno/química , Zircônio/química , Catálise , Gases/químicaRESUMO
Present paper studies the influence of electrochemically generated mixed oxidants on the physicochemical properties of natural organic matter, and especially from the disinfection by-products formation point of view. The study was carried out in a full scale water treatment plant. Results indicate that mixed oxidants favor humic to non-humic conversion of natural organic matter. Primary treatment preferentially removes the more hydrophobic fraction. This converted the non-humic fraction in an important source of disinfection by-products with a 20% contribution to the final trihalomethane formation potential (THMFP(F)) of the finished water. Enhanced coagulation at 40 mg l(-1) of polyaluminium chloride with a moderate mixing intensity (80 rpm) and pH of 6.0 units doubled the removal efficiency of THMFP(F) achieved at full scale plant. However, gel permeation chromatography data revealed that low molecular weight fractions were still hardly removed. Addition of small amounts of powdered activated carbon, 50 mg l(-1), allowed reduction of coagulant dose by 50% whereas removal of THMFP(F) was maintained or even increased. In systems where mixed oxidants are used addition of powdered activated carbon allows complementary benefits by a further reduction in the THMFP(F) compared to the conventional only coagulation-flocculation-settling process.
Assuntos
Carvão Vegetal/química , Compostos Orgânicos/isolamento & purificação , Oxidantes/química , Purificação da Água/métodos , Floculação , Pós/química , Trialometanos/síntese química , Gerenciamento de Resíduos/métodosRESUMO
Chloroform formation from chlorination of aquatic humic and fulvic acid solutions was studied. Second order overall kinetic model was assumed, first order with respect to chlorine and precursor content. Rate constants have been measured, resulting in values that varied significantly with reaction conditions, in the range of 0.177-7.206 [L/ mmol h], mainly for fulvic acid. The activation energy deduced from experiments carried out at different temperatures also increased notably when decreasing pH from 8 to 7. Increases of up to 60% were computed, where highest values were measured for humic acid. It is noteworthy the dependence observed on reaction time: higher activation energy resulted for longest reaction periods. Differences in the range of 40% have been reported. This effect is attributed to the existence of simultaneous reactions, each with different activation energy, competing for trihalomethanes formation.