Disclosing the Biocide Activity of α-Ag2-2xCuxWO4 (0 ≤ x ≤ 0.16) Solid Solutions.

In this work, α-Ag2-2xCuxWO4 (0 ≤ x ≤ 0.16) solid solutions with enhanced antibacterial (against methicillin-resistant Staphylococcus aureus) and antifungal (against Candida albicans) activities are reported. A plethora of techniques (X-ray diffraction with Rietveld refinements, inductively coupled plasma atomic emission spectrometry, micro-Raman spectroscopy, attenuated total reflectance-Fourier transform infrared spectroscopy, field emission scanning electron microscopy, ultraviolet-visible spectroscopy, photoluminescence emissions, and X-ray photoelectron spectroscopy) were employed to characterize the as-synthetized samples and determine the local coordination geometry of Cu2+ cations at the orthorhombic lattice. To find a correlation between morphology and biocide activity, the experimental results were sustained by first-principles calculations at the density functional theory level to decipher the cluster coordinations and electronic properties of the exposed surfaces. Based on the analysis of the under-coordinated Ag and Cu clusters at the (010) and (101) exposed surfaces, we propose a mechanism to explain the biocide activity of these solid solutions.

Selective Synthesis of α-, ß-, and γ-Ag2WO4 Polymorphs: Promising Platforms for Photocatalytic and Antibacterial Materials.

Silver tungstate (Ag2WO4) shows structural polymorphism with different crystalline phases, namely, orthorhombic, hexagonal, and cubic structures that are commonly known as α, ß, and γ, respectively. In this work, these Ag2WO4 polymorphs were selectively and successfully synthesized through a simple precipitation route at ambient temperature. The polymorph-controlled synthesis was conducted by means of the volumetric ratios of the silver nitrate/tungstate sodium dehydrate precursors in solution. The structural and electronic properties of the as-synthesized Ag2WO4 polymorphs were investigated by using a combination of X-ray diffraction and Rietveld refinements, X-ray absorption spectroscopy, X-ray absorption near-edge structure spectroscopy, field-emission scanning electron microscopy images, and photoluminescence. To complement and rationalize the experimental results, first-principles calculations, at the density functional theory level, were carried out, leading to an unprecedented glimpse into the atomic-level properties of the morphology and the exposed surfaces of Ag2WO4 polymorphs. Following the analysis of the local coordination of Ag and W cations (clusters) at each exposed surface of the three polymorphs, the structure-property relationship between the morphology and the photocatalytic and antibacterial activities against amiloride degradation under ultraviolet light irradiation and methicillin-resistant Staphylococcus aureus, respectively, was investigated. A possible mechanism of the photocatalytic and antibacterial activity as well the formation process and growth of the polymorphs is also explored and proposed.

Insights into the activation of oral keratinocyte cell death by Candida albicans and Staphylococcus aureus biofilms.

Polymicrobial biofilms comprising Candida albicans and Staphylococcus aureus can increase the frequency and severity of oral diseases. This study assessed oral keratinocyte cell death, apoptosis and/or necrosis, promoted by soluble factors from single and dual biofilms of S. aureus and C. albicans. The soluble factors were obtained from the 16-h biofilm growth media. Cell viability was assessed by MTT and cell membrane damage by LDH. SEM was used for morphology changes. Assessment of apoptosis and necrosis was performed using annexin V and propidium iodide and caspases -2, -3, -6, -8 and -9. Statistical analysis was conducted with ANOVA and Tukey tests (α = 5%). Dual biofilms promoted the greatest harmful effect on oral cells, with a viability rate of 31.76%, damage to cell membranes and LDH released. Dual biofilms also induced higher percentages of necrotic cells (24.95%). Apoptosis was associated with caspases -2, -3, -6 and -8 activation.

Soluble factors from biofilm of Candida albicans and Staphylococcus aureus promote cell death and inflammatory response.

BACKGROUND: The objective of this study was to better understand the effects of soluble factors from biofilm of single- and mixed-species Candida albicans (C. albicans) and methicillin-sensitive Staphylococcus aureus (MSSA) cultures after 36 h in culture on keratinocytes (NOK-si and HaCaT) and macrophages (J774A.1). Soluble factors from biofilms of C. albicans and MSSA were collected and incubated with keratinocytes and macrophages, which were subsequently evaluated by cell viability assays (MTT). Lactate dehydrogenase (LDH) enzyme release was measured to assess cell membrane damage to keratinocytes. Cells were analysed by brightfield microscopy after 2 and 24 h of exposure to the soluble factors from biofilm. Cell death was detected by labelling apoptotic cells with annexin V and necrotic cells with propidium iodide (PI) and was visualized via fluorescence microscopy. Soluble factors from biofilm were incubated with J774A.1 cells for 24 h; the subsequent production of NO and the cytokines IL-6 and TNF-α was measured by ELISA. RESULTS: The cell viability assays showed that the soluble factors of single-species C. albicans cultures were as toxic as the soluble factors from biofilm of mixed cultures, whereas the soluble factors of MSSA cultures were less toxic than those of C. albicans or mixed cultures. The soluble factors from biofilm of mixed cultures were the most toxic to the NOK-si and HaCaT cells, as confirmed by analyses of PI labelling and cell morphology. Soluble factors from biofilm of single-species MSSA and mixed-species cultures induced the production of IL-6, NO and TNF-α by J744A.1 macrophages. The production of IL-6 and NO induced by the soluble factors from biofilm of mixed cultures was lower than that induced by the soluble factors from biofilm of single-species MSSA cultures, whereas the soluble factors from biofilm of C. albicans cultures induced only low levels of NO. CONCLUSIONS: Soluble factors from 36-h-old biofilm of C. albicans and MSSA cultures promoted cell death and inflammatory responses.

Effect of titanium and zirconia dental implant abutments on a cultivable polymicrobial saliva community.

STATEMENT OF PROBLEM: Peri-implantitis is considered the most important biological complication responsible for late implant failure. The physical chemical properties intrinsic to each material can affect the first step to biofilm development and is an important precursor to the adaptive behavior of pathogenic bacteria species. PURPOSE: The purpose of this in vitro study was to evaluate the effect of 2 commercially available implant abutment materials on the adhesion phase and biofilm formation. MATERIAL AND METHODS: Disks (8 mm in diameter, 2 mm thick) of machined pure titanium (Ti) and yttrium-stabilized zirconia (ZrO2) materials were used to mimic implant abutments. The physical chemical surface properties were investigated using different approaches. Initial adherent bacteria and biofilm formation were evaluated after 16 and 48 hours by incubating the disks in a rich medium containing representative saliva-derived oral microbial community. Unpaired t test, 2 tailed, was used to compare the groups. RESULTS: Ti presented lower hydrophobicity and surface free energy values than the ZrO2, and 6.1-fold fewer bacteria adhered to the Ti. After 48 hours, detailed quantitative analysis showed that biofilm biomass and biofilm density were lower on the Ti disks than on ZrO2. The quantity of phylotypes on the Ti and ZrO2 surfaces was relatively similar during the attachment and early biofilm formation periods. CONCLUSIONS: Although no difference in the bacteria profile was observed between both materials independent of the time point, the highest level of colonization was on ZrO2.

Occlusal Pressure Analysis of Complete Dentures after Microwave Disinfection: A Clinical Study.

PURPOSE: This clinical study evaluated the effect of microwave disinfection protocols on the occlusal pressure pattern of dentures. MATERIALS AND METHODS: Dentures were constructed for 40 patients and evaluated as follows (n = 20). Group 1: Patients had the maxillary dentures submitted to microwave disinfection, once a week, for 4 weeks. Group 2: Patients had the maxillary dentures submitted to microwave disinfection, three times a week, for 4 weeks. Occlusal contacts were recorded on five occasions: 30 days after denture insertion and before first disinfection (baseline or control group); 1 week after disinfection; 2 weeks after disinfection; 3 weeks after disinfection; 4 weeks after disinfection. Occlusal contacts were analyzed by T-Scan III. Intergroup analysis was performed using the Mann-Whitney test and intragroup analysis using the Friedman test with significance of 5%. RESULTS: The results showed no significant difference between groups during the periods. The data on parameters loss of denture adaptation or complaints showed that patients used their dentures regularly for eating and expressed comfort and satisfaction in all experimental periods. The evaluation of functional occlusion revealed that the distribution of the occlusal contacts remained unaltered after disinfection. CONCLUSION: Microwave disinfection protocols as studied in this report did not influence occlusal contacts of the complete dentures.

Reliability of the agar based method to assess the production of degradative enzymes in clinical isolates of Candida albicans.

The aim of this study was to establish a reproducible protocol using the methodology of hyaline zones around the colonies on specific agar plates for phospholipase and proteinase production. This was an in vitro double-blind experiment, in which the dependent variables were the enzymatic activity measurements (Pz) for the production of phospholipase (Pz-ph) and the production of secreted aspartyl proteinases (Pz-sap). Three independent variables give rise to different measurement protocols. All measurements were carried out at two different moments by four examiners (E1, E2, E3, and E4). The minimum sample size was 30 Candida albicans clinical isolates. Specific agar plates for phospholipase and SAPs production were prepared according the literature. The intra-and inter-examiner reproducibility for each protocol was estimated using the Intraclass Correlation Coefficient (ICC) and its confidence interval (95% CI). Based on the results obtained for both phospholipase and SAPs, there appears to be no consensus on the protocol chosen for each particular examiner. Measuring the colonies in triplicate may be the main factor associated with the increase in measurement accuracy and should therefore take precedence over measuring only one colony. When only one examiner is responsible for taking measurements, a standard protocol should be put in place and the statistical calibration of this researcher should be done prior to data collection. However, if two or more researchers are involved in the assessment of agar plates, our results suggest that the protocols using software to undertake plate reading is preferred.

Cytotoxicity of antimicrobial photodynamic inactivation on epithelial cells when co-cultured with Candida albicans.

This study assessed the cytotoxicity of antimicrobial Photodynamic Inactivation (aPDI), mediated by curcumin, using human keratinocytes co-cultured with Candida albicans. Cells and microorganisms were grown separately for 24 hours and then kept in contact for an additional 24 hours. After this period, aPDI was applied. The conditions tested were: P+L+ (experimental group aPDI); P-L+ (light emitting diode [LED] group); P+L- (curcumin group); and P-L- (cells in co-culture without curcumin nor LED). In addition, keratinocytes and C. albicans were grown separately, were not placed in the co-culture and did not receive aPDI (control group). Cell proliferation was assessed using Alamar Blue, MTT, XTT and CFU tests. Qualitative and quantitative analyses were performed. Analysis of variance (ANOVA) was applied to the survival percentages of cells compared to the control group (considered as 100% viability), complemented by multiple comparisons using Tukey's test. A 5% significance level was adopted. The results of this study showed no interference in the metabolism of the cells in co-culture, since no differences were observed between the control group (cultured cells by themselves) and the P-L- group (co-culture cells without aPDI). The aPDI group reached the highest reduction (p = 0.009), which was equivalent to 1.7 log10 when compared to the control group. The P+L-, P-L+, P-L- and control groups were not statistically different (ρ > 0.05). aPDI inhibited the growth of keratinocytes and C. albicans in all tests, so the therapy was considered slightly (inhibition between 25 and 50% compared to the control group) to moderately (inhibition between 50 and 75% compared to the control group) cytotoxic.

Photodynamic inactivation of a multispecies biofilm using curcumin and LED light.

This study evaluated the potential of curcumin-mediated antimicrobial photodynamic inactivation (API) on multispecies biofilms of Candida albicans, Candida glabrata, and Streptococcus mutans of different ages. Acrylic samples (n = 480) were made with standardized rough surfaces and incubated with bacteria and yeast for 24 or 48 h. API was performed with curcumin (80, 100, 120 µM) and LED light. Additional acrylic samples were treated with curcumin or LED light only. Positive control samples received neither light nor curcumin. After API, colony counts were quantified (CFU/mL), cell metabolism was determined by means of XTT assay, and the total biofilm biomass was evaluated using Crystal Violet (CV) staining assay and images were obtained by confocal laser scanning microscopy (CLSM). The data were analyzed by nonparametric two-way ANOVA and post hoc Tukey tests (α < 0.05). For 24-h biofilm, API resulted in statistically significant difference (ρ < 0.001) of viability of C. albicans compared with control (P-L-) for all Cur concentrations. For 48-h biofilm, API resulted in statistically significant difference (ρ < 0.001) compared with control only when Cur at 120 µM was used. API promoted statistically significant difference (ρ ≤ 0.001) in the viability of S. mutans and C. glabrata for all Cur concentrations in the two biofilm ages. In addition, API produced a statistically significant difference (ρ < 0.001) of metabolic activity and of total biomass (ρ < 0.001) of multispecies biofilms compared with control for all Cur concentrations. It can be concluded that both 24- and 48-h biofilms were susceptible to API mediated by Cur; however, 24-h biofilm was more sensitive than the 48-h biofilm.

Structural and quantitative analysis of a mature anaerobic biofilm on different implant abutment surfaces.

STATEMENT OF PROBLEM: The longevity of dental implants depends on the absence of inflammation in the periimplant tissue. Similar to teeth, pathogenic bacteria can adhere on implant abutment surfaces and cause periimplant disease and consequently implant loss. PURPOSE: The purpose of this in vitro study was to evaluate the influence of physical and chemical properties of 2 common materials used as implant abutments, titanium (Ti) and zirconia (ZrO2), and the use of bovine enamel (BE) as a positive control on biofilm formation. MATERIAL AND METHODS: Biofilm formation was analyzed by growing Porphyromonas gingivalis and Fusobacterium nucleatum as monospecies and mixed species biofilms on the surfaces. The mean roughness (Ra) and surface free energy were evaluated for each material. Mature biofilm, formed after 7 days of incubation, was analyzed quantitatively and qualitatively by colony-forming unit and confocal laser scanning microscopy. RESULTS: The mean roughness in all disks was ≤0.21 µm and did not affect the bacterial adhesion. Titanium showed a greater degree of hydrophilicity compared with BE after 90 minutes of immersion in saliva. The surface free energy did not show differences, with the highest values for BE. Monospecies biofilms formed by P. gingivalis on Ti, and mixed species biofilm on ZrO2 exhibited small numbers of cells on disk surfaces. By confocal imaging, the mixed species biofilm appeared as a thin layer on ZrO2 surfaces. CONCLUSIONS: Material surfaces could have a significant impact on biofilm formation. ZrO2 implant abutment surfaces showed a decrease in anaerobic biofilm compared with Ti and BE.

Antimicrobial photodynamic therapy against pathogenic bacterial suspensions and biofilms using chloro-aluminum phthalocyanine encapsulated in nanoemulsions.

Antimicrobial photodynamic therapy represents an alternative method of killing resistant pathogens. Efforts have been made to develop delivery systems for hydrophobic drugs to improve the photokilling. This study evaluated the photodynamic effect of chloro-aluminum phthalocyanine (ClAlPc) encapsulated in nanoemulsions (NE) on methicillin-susceptible and methicillin-resistant Staphylococcus aureus suspensions and biofilms. Suspensions and biofilms were treated with different delivery systems containing ClAlPc. After the pre-incubation period, the drug was washed-out and irradiation was performed with LED source (660 ± 3 nm). Negative control samples were not exposed to ClAlPc or light. For the suspensions, colonies were counted (colony-forming units per milliliter (CFU/mL)). The metabolic activity of S. aureus suspensions and biofilms were evaluated by the XTT assay. The efficiency was dependent on the delivery system, superficial load and light dose. Cationic NE-ClAlPc and free-ClAlPc caused photokilling of the both strains of S. aureus. For biofilms, cationic NE-ClAlPc reduced cell metabolism by 80 and 73% of susceptible and resistant strains, respectively. Although anionic NE-ClAlPc caused a significant CFU/ml reduction for MSSA and MRSA, it was not capable of reducing MRSA biofilm metabolism. This therapy may represent an alternative treatment for eradicating resistant strains.

In vitro evaluation of adherence of Candida albicans, Candida glabrata, and Streptococcus mutans to an acrylic resin modified by experimental coatings.

This study evaluated the effect of experimental coatings, containing zwitterion or hydrophilic monomers, on the adherence of Candida albicans, Candida glabrata, and Streptococcus mutans to an acrylic resin. Acrylic samples (smooth or rough surfaces) were left untreated (control) or coated with one of the following experimental coatings: 3-hydroxypropylmethacrylate (HP) or sulfobetaine methacrylate (S), at concentrations of 25, 30, or 35%. Half of the specimens were coated with saliva. The adhesion test was performed by incubating specimens in C. albicans, C. glabrata, and S. mutans suspensions at 37°C for 90 min. The number of adhered microorganisms was determined by metabolic activity (XTT) and by cell viability (CFU). All coated specimens exhibited lower absorbance and CFU values compared to control specimens. Saliva and roughness did not promote microorganism adherence. An XPS analysis confirmed the modification in the chemical composition of the coatings in the experimental samples. These experimental coatings significantly reduced the adherence of C. albicans, C. glabrata and S. mutans to acrylic resin.

Enzymatic activity profile of a Brazilian culture collection of Candida albicans isolated from diabetics and non-diabetics with oral candidiasis.

The secretion of hydrolytic enzymes is a fundamental virulence factor of Candida albicans to develop disease. The objective of this study was to characterise the virulence of 148 clinical isolates of C. albicans from oral candidiasis by assessing the expression of phospholipase (PL) and secreted aspartyl proteinase (SAP). Isolates were obtained from healthy subjects (HS) and diabetics (DOC) and non-diabetics with oral candidiasis (NDOC). An aliquot (5 µl) of each cell suspension was inoculated on PL and SAP agar plates and incubated. Enzymes secretion was detected by the formation of an opaque halo around the colonies and enzymatic activity (PZ) was determined by the ratio between colony diameter and colony diameter plus the halo zone. Statistical comparisons were made by a one-way anova followed by Tukey's post hoc test (α = 0.05). The clinical sources of C. albicans had significant effect (P < 0.001) on the PZ values of both enzymes. For PL, clinical isolates from NDOC and DOC had highest enzymatic activity than those from HS (P < 0.05), with no significant differences between them (P = 0.506). For SAP, C. albicans from NDOC showed the lower enzymatic activity (P < 0.001). There were no significant differences between isolates from HS and DOC (P = 0.7051). C. albicans isolates from NDOC and DOC patients showed an increased production of PL.

Candida albicans adherence to an acrylic resin modified by experimental photopolymerised coatings: an in vitro study.

PURPOSE: This study evaluated whether photopolymerised coatings containing zwitterion or hydrophilic monomers would reduce the adhesion of Candida albicans to an acrylic resin. MATERIALS AND METHODS: Disc-shaped samples (n = 468) were fabricated with rough or smooth surfaces. The samples did not receive any surface treatment (control) or were coated with one of the following experimental coatings (2-hydroxyethyl methacrylate - HE; 3-hydroxypropyl methacrylate - HP; and 2-trimethylammonium ethyl methacrylate chloride - T; and sulfobetaine methacrylate - S). The concentrations of the constituent monomers were 25, 30 or 35%. The water contact angles of the samples were measured, and half of the samples were exposed to saliva. The adherent yeast cells were counted after crystal violet staining. RESULTS: For the smooth samples, the groups S35, HP35 and HE35 showed significantly lower number of adhered Candida than control, in the absence of saliva. There were no significant differences among the experimental and control groups for the rough samples, but the saliva decreased the cell numbers for groups S25, S30 and HP30. The photoelectron spectroscopy analysis confirmed the changes in the chemical compositions of the experimental samples. CONCLUSIONS: The experimental photopolymerised coatings changed the chemical composition and decreased C. albicans adhesion in the groups S35, HP35 and HE35, suggesting that they should be further investigated.

Curcumin-mediated photodynamic inactivation of Candida albicans in a murine model of oral candidiasis.

In vitro investigations of curcumin-mediated photodynamic therapy (PDT) are encouraging, but there is a lack of reliable in vivo evidence of its efficacy. This study describes the photoinactivation of Candida albicans in a murine model of oral candidiasis, using curcumin as a photosensitizer. Forty immunosuppressed mice were orally inoculated with C. albicans and after five days, they received topical curcumin (20, 40 and 80 µM) and illumination with LED light. The use of curcumin or light alone were also investigated. Positive control animals did not receive any treatment and negative control animals were not inoculated with C. albicans. The number of surviving yeast cells was determined and analyzed by ANOVA and Tukey's post-hoc test (α = 0.05). Histological evaluation of the presence of yeast and inflammatory reaction was also conducted. All exposures to curcumin with LED light caused a significant reduction in C. albicans viability after PDT, but the use of 80 µM curcumin associated with light was able to induce the highest log10 reduction in colony counts (4 logs). It was concluded that curcumin-mediated PDT proved to be effective for in vivo inactivation of C. albicans without harming the host tissue of mice.

In vitro adhesion of Candida glabrata to denture base acrylic resin modified by glow-discharge plasma treatment.

This study evaluated the potential of plasma treatments to modify the surface chemistry and hydrophobicity of a denture base acrylic resin to reduce the Candida glabrata adhesion. Specimens (n = 54) with smooth surfaces were made and divided into three groups (n = 18): control - non-treated; experimental groups - submitted to plasma treatment (Ar/50 W; AAt/130 W). The effects of these treatments on chemical composition and surface topography of the acrylic resin were evaluated. Surface free energy measurements (SFE) were performed after the treatments and after 48 h of immersion in water. For each group, half (n = 9) of the specimens were preconditionated with saliva before the adhesion assay. The number of adhered C. glabrata was evaluated by cell counting after crystal violet staining. The Ar/50 W and AAt/130 W treatments altered the chemistry composition, hydrophobicity and topography of acrylic surface. The Ar/50 W group showed significantly lower C. glabrata adherence than the control group, in the absence of saliva. After preconditioning with saliva, C. glabrata adherence in experimental and control groups did not differ significantly. There were significant changes in the SFE after immersion in water. The results demonstrated that Ar/50 W treated surfaces have potential for reducing C. glabrata adhesion to denture base resins and deserve further investigation, especially to tailor the parameters to prolong the increased wettability.

Phototoxic effect of curcumin on methicillin-resistant Staphylococcus aureus and L929 fibroblasts.

Photodynamic therapy has been investigated as an alternative method of killing pathogens in response to the multiantibiotic resistance problem. This study evaluated the photodynamic effect of curcumin on methicillin-resistant Staphylococcus aureus (MRSA) compared to susceptible S. aureus (MSSA) and L929 fibroblasts. Suspensions of MSSA and MRSA were treated with different concentrations of curcumin and exposed to light-emitting diode (LED). Serial dilutions were obtained from each sample, and colony counts were quantified. For fibroblasts, the cell viability subsequent to the curcumin-mediated photodynamic therapy was evaluated using the MTT assay and morphological changes were assessed by SEM analysis. Curcumin concentrations ranging from 5.0 to 20.0 µM in combination with any tested LED fluences resulted in photokilling of MSSA. However, only the 20.0 µM concentration in combination with highest fluence resulted in photokilling of MRSA. This combination also promoted an 80% reduction in fibroblast cell metabolism and morphological changes were present, indicating that cell membrane was the main target of this phototherapy. The combination of curcumin with LED light caused photokilling of both S. aureus strains and may represent an alternative treatment for eradicating MRSA, responsible for significantly higher morbidity and mortality and increased healthcare costs in institutions and hospitals.

Extracellular lipids of Candida albicans biofilm induce lipid droplet formation and decreased response to a topoisomerase I inhibitor in dysplastic and neoplastic oral cells.

OBJECTIVE: Some microorganisms, i.e., Candida albicans, have been associated with cancer onset and development, although whether the fungus promotes cancer or whether cancer facilitates the growth of C. albicans is unclear. In this context, microbial-derived molecules can modulate the growth and resistance of cancer cells. This study isolated extracellular lipids (ECL) from a 36-h Candida albicans biofilm incubated with oral dysplastic (DOK) and neoplastic (SCC 25) cells, which were further challenged with the topoisomerase I inhibitor camptothecin (CPT), a lipophilic anti-tumoral molecule. METHODOLOGY: ECL were extracted from a 36-h Candida albicans biofilm with the methanol/chloroform precipitation method and identified with Nuclear Magnetic Resonance (1H-NMR). The MTT tetrazolium assay measured ECL cytotoxicity in DOK and SCC 25 cells, alamarBlue™ assessed cell metabolism, flow cytometry measured cell cycle, and confocal microscopy determined intracellular features. RESULTS: Three major classes of ECL of C. albicans biofilm were found: phosphatidylinositol (PI), phosphatidylcholine (PC), and phosphatidylglycerol (PG). The ECL of C. albicans biofilm had no cytotoxic effect on neither cell after 24 hours, with a tendency to disturb the SCC 25 cell cycle profile (without statistical significance). The ECL-induced intracellular lipid droplet (LD) formation on both cell lines after 72 hours. In this context, ECL enhanced cell metabolism, decreased the response to CPT, and modified intracellular drug distribution. CONCLUSION: The ECL (PI, PC, and PG) of 36-h Candida albicans biofilm directly interacts with dysplastic and neoplastic oral cells, highlighting the relevance of better understanding C. albicans biofilm signaling in the microenvironment of tumor cells.

Biocompatibility and inflammatory response of silver tungstate, silver molybdate, and silver vanadate microcrystals.

Silver tungstate (α-Ag2WO4), silver molybdate (ß-Ag2MoO4), and silver vanadate (α-AgVO3) microcrystals have shown interesting antimicrobial properties. However, their biocompatibility is not yet fully understood. Cytotoxicity and the inflammatory response of silver-containing microcrystals were analyzed in THP-1 and THP-1 differentiated as macrophage-like cells, with the alamarBlue™ assay, flow cytometry, confocal microscopy, and ELISA. The present investigation also evaluated redox signaling and the production of cytokines (TNFα, IL-1ß, IL-6, and IL-8) and matrix metalloproteinases (MMP-8 and -9). The results showed that α-AgVO3 (3.9 µg/mL) did not affect cell viability (p > 0.05). α-Ag2WO4 (7.81 µg/mL), ß-Ag2MoO4 (15.62 µg/mL), and α-AgVO3 (15.62 µg/mL) slightly decreased cell viability (p ≤ 0.003). All silver-containing microcrystals induced the production of O2 - and this effect was mitigated by Reactive Oxygen Species (ROS) scavenger and N-acetylcysteine (NAC). TNFα, IL-6 and IL-1ß were not detected in THP-1 cells, while their production was either lower (p ≤ 0.0321) or similar to the control group (p ≥ 0.1048) for macrophage-like cells. The production of IL-8 by both cellular phenotypes was similar to the control group (p ≥ 0.3570). The release of MMP-8 was not detected in any condition in THP-1 cells. Although MMP-9 was released by THP-1 cells exposed to α-AgVO3 (3.9 µg/mL), no significant difference was found with control (p = 0.7). Regarding macrophage-like cells, the release of MMP-8 and -9 decreased in the presence of all microcrystals (p ≤ 0.010). Overall, the present work shows a promising biocompatibility profile of, α-Ag2WO4, ß-Ag2MoO4, and α-AgVO3 microcrystals.

Toxicity of photodynamic therapy with LED associated to Photogem®: an in vivo study.

The aims of this study were to evaluate the effects of Photogem®-mediated photosensitization on rat palatal mucosa and the biodistribution of the photosensitizer in this tissue. A solution of Photogem® (500 or 1000 mg/l) was applied to the palatal mucosa for 30 min and the exposure time to blue LED (460 nm) was 20 min (144 J/cm(2)). At 0, 1, 3, and 7 days, palatal mucosa was photographed for macroscopic analysis. After killing, the palate was removed for microscopic analysis. Thermal mapping evaluated temperature change in the tissue during irradiation. All experimental groups revealed intact mucosa in the macroscopic analysis. Tissue alterations were observed microscopically for only four out of 80 animals subjected to PDT. Fluorescence emitted by Photogem® was identified and was limited to the epithelial layer. A temperature increase from 35 to 41°C was recorded. Photogem®- mediated PDT was not toxic to the rat palatal mucosa.