RESUMO
The introgression of M. enterolobii resistance-related genes in guava breeding programs can be compromised by incompatibility among Psidium species. This study aimed to evaluate the female parent preference and genetic diversity of Psidium interspecific hybrids using morphoagronomic traits and resistance to M. enterolobii. There were evaluated cross successes and germination from crosses between accesses of P. cattleyanum, P. guineense and P. guajava and the genetic diversity by Ward-MLM method of hybrids according to descriptors developed for the genus. Crosses were more successful when P. cattleyanum was the female parent. Germination was more successful in crosses involving P. cattleyanum and P. guajava. Four groups were formed. The group IV clustered the most resistant genotypes, composed by genotypes of P. cattleyanum x P. guineense, while the group II was the most susceptible. The groups I and III grouped some genotypes of P. cattleyanum x P. guajava with low levels of susceptibility. There are preferences of female parent species among crosses. Some individuals of groups I and III can be used as source of resistance genes for the breeding program, due the presence of favorable alleles inherited from guava parent. The high susceptibility leads to reduction in root development.
Assuntos
Psidium , Tylenchoidea , Humanos , Feminino , Animais , Psidium/genética , Melhoramento Vegetal , Fenótipo , Variação Genética/genéticaRESUMO
An effective and sustainable process capable of simultaneously execute desulfurization and denitrogenation of fuels is in fact an actual necessity in the refinery industry. The key to achieve this goal is the parallel oxidation of sulfur and nitrogen compounds present in fuels, which is only achieved by an active and recovered catalyst. A novel heterogeneous catalyst was successfully prepared by the encapsulation of an imidazolium-based polyoxometalate (POM) into a ZIF-8 framework ([BMIM]PMo12@ZIF-8). This composite material revealed exceptional catalytic efficiency to concurrently proceed with the oxidative desulfurization and denitrogenation of a multicomponent model fuel containing various sulfur and nitrogen compounds. A complete removal of all these compounds was achieved after only one hour and the catalyst system was able to be reused for ten consecutive cycles without loss of efficiency. In fact, an ionic liquid POM was incorporated in the ZIF-8 for the first time, and this composite compound was originally applied as a catalyst for simultaneous oxidative desulfurization and denitrogenation processes.
RESUMO
For decades there have been anecdotal claims of synergistic interactions between plant-parasitic nematodes and soil-borne fungi causing decline of productivity of passion fruit (Passiflora edulis) orchards. An empirical confirmation of these disease complexes would impact disease management and plant breeding for resistance. To test those claims, we subjected passion fruit plants to single or concomitant parasitism by Meloidogyne javanica or M. incognita and Fusarium nirenbergiae or Neocosmospora sp. under controlled conditions. Non-inoculated plants served as control for the assays. The severity of shoot symptoms and variables related to plant growth, the extent of fungal lesions, and nematode reproduction were assessed to characterize the interactions. The shoot symptoms and effect on plant growth induced by the pathogens varied, but no synergy between the pathogens was observed. Moreover, the volume of tissue lesioned by the fungi was not affected by co-parasitism of the nematodes. Conversely, plant resistance to the nematodes was not affected by co-parasitism of the fungi. The interactions M. incognita-F. nirenbergiae, M. incognita-Neocosmospora sp., M. javanica-F. nirenbergiae, and M. javanica-Neocosmospora sp. were not synergistic as previously claimed, but instead neutral.
RESUMO
The REML/BLUP procedure has been successfully used for genetic progress through individual selection of high-yielding passion fruit genotypes resistant to the Cowpea aphid-borne mosaic virus. This study was thus developed to estimate genetic parameters and predict the gain obtained from individual selection of genotypes in a population derived from backcrosses in passion fruit. The experiment was set up as a randomized block design with four replicates, involving five full-sib families (genotypes from the first backcross). Variance components and the genetic values were estimated for eight agronomic traits via the REML/BLUP procedure. For all traits, genotypic variance between the genotypes from the first backcross showed little contribution to the phenotypic variance. The low heritability estimates obtained for the traits are overcome via individual BLUP estimates. Therefore, it was possible to obtain considerable gains with individual selection for the variables fruit length, average fruit weight, and pulp weight (19.50 to 14.04%; 22.93 to 17.97%; and 10.08 to 7.95%, respectively). For the traits showing lower gains, it is possible to obtain gains indirectly by selecting genotypes for correlated traits. Because this population derives from the first backcross generation, agronomic traits still must be recovered.
Assuntos
Passiflora , Frutas , Genótipo , Fenótipo , MadeiraRESUMO
There are no guava cultivars resistant to the Meloidogyne enterolobii; for this reason, genetic breeding has been performed by introgressing genes into the current cultivars through interspecific hybridization. We used 33 microsatellite markers for the genetic-molecular characterization of segregating populations of Psidium resistant to M. enterolobii, aiming at selection within and between populations for generation advancement in the guava breeding program. The average number of alleles per locus ranged from 1.60 to 2.09. Populations 1 (P. guineense × P. cattleyanum) and 5 (P. guajava × P. cattleyanum) obtained the greatest genetic diversity, which can be confirmed by the higher observed-heterozygosity values (0.422 and 0.312, respectively). Bayesian analysis showed that the populations were subdivided into three groups, agreeing with the number of groups observed by Nei's genetic distance. The population obtained from the P. guineense × P. cattleyanum cross differed from the others with a clear structuring, whereas the P. guajava × P. cattleyanum and P. cattleyanum × P. guineense populations were the most similar between each other. The SSR markers were efficient in discriminating the populations, and individual 80 may be employed in future crosses with guava, allowing generation advancement in the guava breeding program aimed at resistance to M. enterolobii.
Assuntos
Psidium , Animais , Teorema de Bayes , Cruzamento , Variação Genética , Repetições de MicrossatélitesRESUMO
The valorization of the large amount of crude glycerol formed from the biodiesel industry is of primordial necessity. One possible direction with high interest to the biorefinery sector is the production of fuel additives such as solketal, through the acetalization of glycerol with acetone. This is a chemical process that conciliates high sustainability and economic interest, since solketal contributes to the fulfillment of a Circular Economy Model through its use in biodiesel blends. The key to guarantee high efficiency and high sustainability for solketal production is the use of recovery and recyclable heterogeneous catalysts. Reported works indicate that high yields are attributed to catalyst acidity, mainly the ones containing Brönsted acidic sites. On the other hand, the catalyst stability and its recycling capacity are completely dependent of the support material and the acidic sites incorporation methodology. This review intends to conciliate the information spread on this topic and indicate the most assertive strategies to achieve high solketal production in short reaction time during various reaction cycles.
RESUMO
A successful encapsulation of Keggin-type polyoxomolybdate (H3[PMo12O40], PMo12) into metal-organic framework (MOF) materials with an identical framework but distinct metal centers (ZIF-8 with Zn2+ and ZIF-67 with Co2+) was accomplished by a straightforward room-temperature procedure. The presence of Zn2+ in the composite material PMo12@ZIF-8 instead of Co2+ in PMo12@ZIF-67 caused a remarkable increase in the catalytic activity that achieved a total oxidative desulfurization of a multicomponent model diesel under moderate and friendly conditions (oxidant: H2O2 and solvent: ionic liquid, IL). Interestingly, the parent ZIF-8-based composite with the Keggin-type polyoxotungstate (H3[PW12O40], PW12), PW12@ZIF-8, did not show the relevant catalytic activity. The ZIF-type supports present an appropriate framework to accommodate active polyoxometalates (POMs) into their cavities without leaching, but the nature of the metallic center from the POM and the metal present in the ZIF framework were vital for the catalytic performance of the composite materials.
RESUMO
In view of the need to develop new popcorn cultivars and considering the uncertainties in choosing the most appropriate breeding methods to ensure consistent genetic progress, simultaneously for both popping expansion and grain yield, this study addressed the efficiency of interpopulation recurrent selection regarding genetic gains, the study of the response in genetic parameters as well as heterotic effects on the control of the main agronomic traits of popcorn. Two populations were established, Pop1 and Pop2. A total of 324 treatments were evaluated, which consisted of 200 half-sib families (100 from Pop1 and 100 from Pop2), 100 full-sib families from the two populations and 24 controls. The field experiment was arranged in a lattice design with three replications in two environments, in the north and northwest regions of the State of Rio de Janeiro, Brazil. The genotype × environment interaction was partitioned and the genetic parameters, heterosis and predicted gains were estimated by the Mulamba and Mock index, based on selection results in both environments. The genetic parameters detected variability that can be explored in successive interpopulation recurrent selection cycles. Exploring heterosis for GY, PE and yield components is a promising option to increase grain yield and quality. The Mulamba and Mock index was efficient in predicting the genetic gains in GY and PE. Interpopulation recurrent selection proved effective to provide genetic gains for traits with predominantly additive and dominance inheritance.
RESUMO
The genus Coffea comprises more than 100 species, of which the most commercially important are Coffea arabica and Coffea canephora. The latter is a self-incompatible plant with high natural genetic variability. The detection of polymorphism at the DNA level by molecular markers allowed significant progress with the selection of superior plants. The objective of this study was the molecular characterization of C. canephora using microsatellite markers. To this end, a population of forty-four C. canephora genotypes and one C. arabica genotype, was evaluated with 21 primers. These primers identified 61 alleles in the population and between 2 and 5 alleles per locus. The information index indicated a high level of polymorphism of the analyzed markers. According to the observed and expected heterozygosity, the genetic diversity in the population is high. The overall inbreeding coefficient of the population detected high heterozygosity and zero inbreeding within this population. Genetic diversity among the accessions was also evaluated by the unweighted pair-group method based on arithmetic averages (UPGMA). Six groups were formed based on Mojena's cutting rule and three using the Bayesian approach. These results confirmed the existence of genetic diversity, genetic variability and a potential for selection in future breeding efforts involving the 45 genotypes studied.
RESUMO
This work aimed to use the Bayesian approach to discriminate 43 genotypes of Coffea canephora cv. Conilon, which were cultivated in two producing regions to identify the most stable and productive genotypes. The experiment was a randomized block design with three replications and seven plants per plot, carried out in the south of Bahia and the north of Espírito Santo, environments with different climatic conditions, and evaluated during four harvests. The proposed Bayesian methodology was implemented in R language, using the MCMCglmm package. This approach made it possible to find great genetic divergence between the materials, and detect significant effects for both genotype, environment, and year, but the hyper-parametrized models (block effect) presented problems of singularity and convergence. It was also possible to detect a few differences between crops within the same environment. With a model with lower residual, it was possible to recommend the most productive genotypes for both environments: LB1, AD1, Peneirão, Z21, and P2.
RESUMO
The objective of this work was to use the Bayesian approach, modeling the interaction of coffee genotypes with the environment, using a bisegmented regression to identify stable and adapted genotypes. A group of 43 promising genotypes of Coffea canephora was chosen. The genotypes were arranged in a randomized block design with three replications of seven plants each. The experimental plot was harvested four years in the study period, according to the maturation cycle of each genotype. The proposed Bayesian methodology was implemented in the free program R using rstanarm and coda packages. It was possible to use previous information on coffee genotypes as prior information on parameter distributions of an Adaptability and Stability model, which allowed obtaining shorter credibility intervals and good evidence of low bias in the model by the determination coefficient. After fine adjustments in the approach, it was possible to make inferences about the significant GxE interaction and to discriminate the coffee genotypes regarding production, adaptability, and stability. This is still a new approach for perennials, and since it allows more accurate estimates it can be advantageous when planning breeding programs. The Z21 genotype is recommended to compose part of selected genetic material for highly technical farmers, as it responds very well to the favorable environment, being one of the most productive and with excellent stability.
Assuntos
Coffea , Teorema de Bayes , Coffea/genética , Café , Genótipo , Melhoramento VegetalRESUMO
Crossing and developing inbred lines have been promising options for guava breeding programs. The purpose of this study was to evaluate the genetic divergence among genotypes of S1 inbred guava families by means of the Gower's technique and the Ward-MLM methodology, to verify the correlation and relative contribution of traits, as well as to identify descriptors with minimum efficiency for this species. The experiment was implemented at the Estação Experimental da Ilha Barra do Pomba, in the municipality of Itaocara, RJ, Brazil. A randomized block design with 18 inbred families, three replicates, and ten plants per plot was used for the experimental design. After 19 months from the planting of the experiment, the 61 earliest and most productive genotypes (individual plants) were evaluated. For this purpose, 29 descriptors were evaluated, of which fifteen were qualitative and fourteen, quantitative. The characteristics required to obtain the distance matrix were analyzed based on the Gower algorithm, and a comparative cluster between the dendrograms of the morphoagronomic variables was achieved from this matrix. Lastly, the Ward-MLM procedure was applied to form the clusters of inbred families. By using all 29 descriptors, greater efficiency was achieved in cluster discrimination. Hence, according to the results identified, it is not possible to indicate minimum descriptors for the culture. Using the Ward-MLM method, the descriptors that most contributed to the divergence among the genotypes were fruit flesh mass, fruit weight, fruit diameter, fruit flesh thickness, fruit placental mass, and fruit length. The most divergent genotypes can be recommended for further crosses or self-pollinations to develop new lines in the guava breeding program of UENF.
Assuntos
Variação Genética , Psidium , Feminino , Humanos , Gravidez , Psidium/genética , Melhoramento Vegetal/métodos , Placenta , Deriva Genética , Frutas/genéticaRESUMO
The search for productive germplasm adapted to adverse conditions is an important action to mitigate the harmful effects of climate change. The aim was to identify the yield potential of 50 popcorn inbred lines grown in field conditions, in two crop seasons (CS), and under contrasting water conditions (WC). Morphoagronomic, physiological, and root system traits were evaluated. Joint and individual analyses of variance were performed, in addition to the multivariate GT bip-lot analysis. Expressive reductions between WC were observed in 100-grain weight (100 GW), popping expansion (PE), grain yield (GY), expanded popcorn volume per ha (EPV), row number per ear (RNE), plant height (PH), relative chlorophyll content (SPAD), and nitrogen balance index (NBI). It was found that the SPAD, 100 GW, GY, PE, and grain number per ear (GNE) traits had the most significant impact on the selection of genotypes. Regardless of WC and CS, the ideal lines were L294 and L688 for PE; L691 and L480 for GY; and L291 and L292 for both traits. SPAD, 100 GW, and GNE can contribute to the indirect selection. Our work contributes to understanding the damage caused by drought and the integration of traits for the indirect selection of drought-tolerant popcorn genotypes.
RESUMO
Markers are an important tool in plant breeding, which can improve conventional phenotypic breeding, generating more accurate information outcoming better decision making. This study aimed to apply and compare the fit of different Bayesian models BRR, BayesA, BayesB, BayesB (setting the value from very low to [Formula: see text] = [Formula: see text]), BayesC and Bayesian Lasso (LASSO) for predictions of the genomic genetic values of productivity and quality traits of a guava population. The models were fitted for traits fruit mass, pulp mass, soluble solids content, fruit number, and production per plant in the genomic prediction with SSR markers, obtained through the CTAB extraction method with 200 primers. The Bayesian ridge regression model showed the best results for all traits and was chosen to predict the individual's genomic values according to the cross-validation data. A good stabilization of the Markov and Monte Carlo chains was observed with the mean values close to the observed phenotypic means. Heritabilities showed good predictive accuracy. The model showed strong correlations between some traits, allowing indirect selection.
RESUMO
The method of regional heritability mapping (RHM) has become an important tool in the identification of quantitative trait loci (QTLs) controlling traits of interest in plants. Here, RHM was first applied in a breeding population of popcorn, to identify the QTLs and candidate genes involved in grain yield, plant height, kernel popping expansion, and first ear height, as well as determining the heritability of each significant genomic region. The study population consisted of 98 S1 families derived from the 9th recurrent selection cycle (C-9) of the open-pollinated variety UENF-14, which were genetically evaluated in two environments (ENV1 and ENV2). Seventeen and five genomic regions were mapped by the RHM method in ENV1 and ENV2, respectively. Subsequent genome-wide analysis based on the reference genome B73 revealed associations with forty-six candidate genes within these genomic regions, some of them are considered to be biologically important due to the proteins that they encode. The results obtained by the RHM method have the potential to contribute to knowledge on the genetic architecture of the growth and yield traits of popcorn, which might be used for marker-assisted selection in breeding programs.
RESUMO
Drought is a common abiotic stress in tropical and subtropical regions that limits the growth and development of agricultural crops, mainly impacting grain yield. Acting through plant breeding is the most viable alternative for obtaining genotypes more tolerant of environments with stress. This work aims to select popcorn genotypes for environments with drought and to identify discriminating traits for the evaluation of drought tolerance in popcorn germplasm. Fifteen Latin American populations of popcorn were evaluated in water stress (WS) and well-watered (WW) conditions. The evaluated traits were based in morpho-agronomic, physiological and radicular descriptors. Data were submitted to individual and joint ANOVA and GT Biplot analysis. Variability was detected between populations for all traits in both conditions. The drought caused a reduction of 30.61% and 3.5% in grain yield and popping expansion, respectively. Based in GT biplot analysis, 880POP was the most stable in WS and WW, being indicated as a promising population for cultivation in environments with water limitation. This study is going to allow the establishment of a collection of great importance to maize germplasm and to provide information to facilitate the process of selection in breeding programs focused on drought tolerance.
RESUMO
Perennial breeding species demand substantial investment in various resources, mainly the required time to obtain adult and productive plants. Estimating several genetic parameters in these species, in a more confidence way, means saving resources when selecting a new genotype. A model using the Bayesian approach was compared with the frequentist methodology for selecting superior genotypes. A population of 17 families of full-siblings of guava tree was evaluated, and the yield, fruit mass, and pulp mass were measured. The Bayesian methodology suggest more accurate estimates of variance components, as well as better results to fit of model in a cross-validation. Proper priori for Bayesian model is very important to convergency of chains, mainly for small datasets. Even with poor priori, Bayesian was better than frequentist approach.
Assuntos
Modelos Genéticos , Melhoramento Vegetal/métodos , Psidium/genética , Seleção Genética , Teorema de Bayes , Brasil , Conjuntos de Dados como Assunto , Frutas , GenótipoRESUMO
Porous metal-organic framework (MOF) materials UiO-66(Zr) obtained by solvothermal and microwave advanced synthesis (MWAS) procedures were characterized, and their catalytic efficiency was investigated for oxidative desulfurization (ODS) processes using a multicomponent model diesel containing benzothiophene and dibenzothiophene derivatives. The preparation parameters as the cooling time after oven use in the solvothermal procedure, and also the reaction time in the MWAS method seemed to play an important role in the catalytic performance of the UiO-66(Zr) material, as well as in its recycle capacity. The material prepared by the solvothermal procedure with a fast cooling time showed the best catalytic performance (desulfurization efficiency of 99.5% after 3 h). However, the application of the UiO-66(Zr) material prepared by the MWAS method (desulfurization efficiency of 96% after 3 h) conciliated a higher number of advantages, such as shorter reaction time preparation (15 min) and high catalytic activity for a higher number of reaction cycles. The UiO-66(Zr) prepared by the MWAS method was used for the first time in an oxidative desulfurization process, and according to the catalytic results obtained (high recycle capacity and stability) and shorter reaction time preparation, seems to be a promising material for industrial application.
RESUMO
The Mauritia flexuosa L.f. palm is known as the "tree of life" given its importance as fundamental food and construction resources for humans. The species is broadly distributed in wet habitats of Amazonia and dry habitats of the Amazon and Orinoco river basins and in the Cerrado savanna. We collected 179 individuals from eight different localities throughout these habitats and used microsatellites to characterize their population structure and patterns of gene flow. Overall, we found high genetic variation, except in one savanna locality. Gene flow between populations is largely congruent with river basins and the direction of water flow within and among them, suggesting their importance for seed dispersal. Further, rivers have had a higher frequency of human settlements than forested sites, contributing to population diversity and structure through increased human use and consumption of M. flexuosa along rivers. Gene flow patterns revealed that migrants are sourced primarily from within the same river basin, such as those from Madeira and Tapajós basins. Our work suggests that rivers and their inhabitants are a critical element of the landscape in Amazonia and have impacted the dispersal and subsequent distribution of tropical palm species, as shown by the patterns of genetic variation in M. flexuosa.
RESUMO
In forage-plants breeding, the selection of superior genotypes has been undertaken through successive harvests in previously established intervals. However, this process involves many steps, the evaluation of many traits, and a great spending with costs and labor. Thus the estimate of the repeatability is essential in improvement of perennials, it allows predicting genotypic value of the individual, the minimum number of evaluations in the selection of genotypes and minimizes resources and time in the selection of promising individuals. The objective of this study was to estimate the repeatability coefficient for morphological traits in elephant grass and determine the number of evaluations needed for phenotypic selection more efficient. The experimental randomized block design with 53 genotypes and two replications. The repeatability coefficients were estimated for variables plant height, number of tillers, stem diameter and dry matter yield, using the methods of Anova, Principal Components and Structural Analysis. We observed significant differences between genotypes (P <0.01) for all variables. The main components provide larger estimates of repeatability when compared to other methods. Estimates of the repeatability coefficients are of high magnitude average for the variables plant height (0.44) number of tillers (0.44) and stem diameter (0.63) and low magnitude for dry matter production (0.27). The Principal Components method requires five, five, two and eleven measurements for plant height, number of tillers, stem diameter and dry matter yield, respectively, with 80% reliability.
No melhoramento de plantas forrageiras, a seleção de genótipos superiores tem sido realizada mediante a realização de cortes sucessivos em intervalos previamente estabelecidos. Entretanto este processo envolve muitas etapas, avaliação de muitos caracteres e um grande dispêndio de custos e mão-de-obra. Assim, a estimativa da repetibilidade é essencial no melhoramento de plantas perenes, pois permite predizer o valor genotípico do indivíduo, o número mínimo de avaliações na seleção de genótipos e minimiza recursos e tempo na seleção de indivíduos promissores. O objetivo deste trabalho foi obter estimativas do coeficiente de repetibilidade para caracteres morfoagronômicos em capim-elefante e determinar o número de avaliações necessárias para seleção fenotípica com maior eficiência. Utilizou-se delineamento experimental de blocos casualizados com 53 genótipos e duas repetições. Foram estimados os coeficientes de repetibilidade para as variáveis altura de plantas (ALT), número de perfilhos (NP), diâmetro de colmo (DC) e produtividade de matéria seca (PMS), utilizando-se os métodos da Anova, Componentes principais e Análise estrutural. Observaram-se diferenças significativas entre os genótipos (p<0,01) para todas as variáveis avaliadas. Os componentes principais proporcionam maiores estimativas de repetibilidade em relação aos demais métodos. As estimativas dos coeficientes de repetibilidade são de média a alta magnitude, para as variáveis ALT, NP e DC e de baixa magnitude para PMS. Com base no método dos Componentes Principais são necessárias cinco, cinco, duas e onze medidas para altura da planta, número de perfilhos, diâmetro do caule e rendimento de matéria seca, respectivamente, com 80% de confiabilidade.