A deep learning approach to the automatic detection of alignment errors in cryo-electron tomographic reconstructions.

Electron tomography is an imaging technique that allows for the elucidation of three-dimensional structural information of biological specimens in a very general context, including cellular in situ observations. The approach starts by collecting a set of images at different projection directions by tilting the specimen stage inside the microscope. Therefore, a crucial preliminary step is to precisely define the acquisition geometry by aligning all the tilt images to a common reference. Errors introduced in this step will lead to the appearance of artifacts in the tomographic reconstruction, rendering them unsuitable for the sample study. Focusing on fiducial-based acquisition strategies, this work proposes a deep-learning algorithm to detect misalignment artifacts in tomographic reconstructions by analyzing the characteristics of these fiducial markers in the tomogram. In addition, we propose an algorithm designed to detect fiducial markers in the tomogram with which to feed the classification algorithm in case the alignment algorithm does not provide the location of the markers. This open-source software is available as part of the Xmipp software package inside of the Scipion framework, and also through the command-line in the standalone version of Xmipp.

An Analytical Solution for Saturable Absorption in Pharmacokinetics Models.

OBJECTIVE: The first-order absorption is a common model used in Pharmacokinetics. The absorption of some drugs follows carrier mediated transport. It has been proposed that the amount of drug available may saturate the transport mechanism resulting in an absorption slower than the one predicted by the first-order model. Saturable absorption has been modeled at the differential equation level by substituting the constant rate absorption by a Hill kinetics absorption. However, its exact solution is so far unknown. The goal of this is to know the exact solution of different Hill kinetic absorption models. METHODS: We start defining different absorption models and increasing then their complexity. The simplest case is the first-order absorption model and the most complex will be a generalized Hill kinetic absorption model. The differential equation of each model is integrated. RESULTS: The complexity of the models their solutions may be not expressed in a close-form, or in term of elementary functions. We obtain and discuss the exact solutions of the different Hill kinetics absorption models. To do that, the solutions are studied according to the possible values of the free parameters of the models. We show the differences between models through simulations. CONCLUSIONS: The knowledge of closed-form solutions allows to illustrate the differences between the different absorption models and minimizes the errors of numerical integration.

ScipionTomo: Towards cryo-electron tomography software integration, reproducibility, and validation.

Image processing in cryogenic electron tomography (cryoET) is currently at a similar state as Single Particle Analysis (SPA) in cryogenic electron microscopy (cryoEM) was a few years ago. Its data processing workflows are far from being well defined and the user experience is still not smooth. Moreover, file formats of different software packages and their associated metadata are not standardized, mainly since different packages are developed by different groups, focusing on different steps of the data processing pipeline. The Scipion framework, originally developed for SPA (de la Rosa-Trevín et al., 2016), has a generic python workflow engine that gives it the versatility to be extended to other fields, as demonstrated for model building (Martínez et al., 2020). In this article, we provide an extension of Scipion based on a set of tomography plugins (referred to as ScipionTomo hereafter), with a similar purpose: to allow users to be focused on the data processing and analysis instead of having to deal with multiple software installation issues and the inconvenience of switching from one to another, converting metadata files, managing possible incompatibilities, scripting (writing a simple program in a language that the computer must convert to machine language each time the program is run), etcetera. Additionally, having all the software available in an integrated platform allows comparing the results of different algorithms trying to solve the same problem. In this way, the commonalities and differences between estimated parameters shed light on which results can be more trusted than others. ScipionTomo is developed by a collaborative multidisciplinary team composed of Scipion team engineers, structural biologists, and in some cases, the developers whose software packages have been integrated. It is open to anyone in the field willing to contribute to this project. The result is a framework extension that combines the acquired knowledge of Scipion developers in close collaboration with third-party developers, and the on-demand design of functionalities requested by beta testers applying this solution to actual biological problems.

Image processing tools for the validation of CryoEM maps.

The number of maps deposited in public databases (Electron Microscopy Data Bank, EMDB) determined by cryo-electron microscopy has quickly grown in recent years. With this rapid growth, it is critical to guarantee their quality. So far, map validation has primarily focused on the agreement between maps and models. From the image processing perspective, the validation has been mostly restricted to using two half-maps and the measurement of their internal consistency. In this article, we suggest that map validation can be taken much further from the point of view of image processing if 2D classes, particles, angles, coordinates, defoci, and micrographs are also provided. We present a progressive validation scheme that qualifies a result validation status from 0 to 5 and offers three optional qualifiers (A, W, and O) that can be added. The simplest validation state is 0, while the most complete would be 5AWO. This scheme has been implemented in a website https://biocomp.cnb.csic.es/EMValidationService/ to which reconstructed maps and their ESI can be uploaded.

Algorithmic robustness to preferred orientations in single particle analysis by CryoEM.

The presence of preferred orientations in single particle analysis (SPA) by cryo-Electron Microscopy (cryoEM) is currently one of the hurdles preventing many structural analyses from yielding high-resolution structures. Although the existence of preferred orientations is mostly related to the grid preparation, in this technical note, we show that some image processing algorithms used for angular assignment and three-dimensional (3D) reconstruction are more robust than others to these detrimental conditions. We exemplify this argument with three different data sets in which the presence of preferred orientations hindered achieving a 3D reconstruction without artifacts or, even worse, a 3D reconstruction could never be achieved.

Re-examining the spectra of macromolecules. Current practice of spectral quasi B-factor flattening.

The analysis of structure factors in 3D cryo-EM Coulomb potential maps and their "enhancement" at the end of the reconstruction process is a well-established practice, normally referred to as sharpening. The aim is to increase contrast and, in this way, to help tracing the atomic model. The most common way to accomplish this enhancement is by means of the so-called B-factor correction, which applies a global filter to boost high frequencies with some dampening considerations related to noise amplification. The results are maps with a better visual aspect and a quasiflat spectrum at medium and high frequencies. This practice is so widespread that most map depositions in the Electron Microscopy Data Base (EMDB) only contain sharpened maps. Here, the use in cryoEM of global B-factor corrections is theoretically and experimentally analyzed. Results clearly illustrate that protein spectra present a falloff. Thus, spectral quasi-flattening may produce protein spectra with distortions when compared with experimental ones, this fact, combined with the practice of reporting only sharpened maps, generates a sub-optimal situation in terms of data preservation, reuse and reproducibility. Now that the field is more advanced, we put forward two suggestions: (1) to use methods which keep more faithfully the original experimental signal properties of macromolecules when "enhancing" the map, and (2) to further stress the need to deposit the original experimental maps without any postprocessing or sharpening, not only the enhanced maps. In the absence of access to these original maps data is lost, preventing their future analysis with new methods.

Blind estimation of DED camera gain in Electron Microscopy.

The introduction of Direct Electron Detector (DED) videos in the Electron Microscope field has boosted Single Particle Analysis to a point in which it is currently considered to be a key technique in Structural Biology. In this article we introduce an approach to estimate the DED camera gain at each pixel from the movies themselves. This gain is needed to have the set of recorded frames into a coherent gray level range, homogeneous over the whole image. The algorithm does not need any other input than the DED movie itself, being capable of providing an estimate of the camera gain image, helping to identify dead pixels and cases of incorrectly calibrated cameras. We propose the algorithm to be used either to validate the experimentally acquired gain image (for instance, to follow its possible change over time) or to verify that there is no residual gain image after experimentally correcting for the camera gain. We show results for a number of DED camera models currently in use (DE, Falcon II, Falcon 3, and K2).

A new algorithm for high-resolution reconstruction of single particles by electron microscopy.

The Map Challenge organized by the Electron Microscopy Data Bank has prompted the development of an Xmipp high resolution reconstruction protocol (which we will refer to as highres) that is integrated in the software platform Scipion. In this work we describe the details of the image angular alignment and map reconstruction steps in our new method. This algorithm is similar to the standard projection matching approach with some important modifications, especially in the area of detecting significant features in the reconstructed volume. We show that the new method is able to produce higher resolution maps than the current de facto standard as measured by the Fourier Shell Correlation, the Monogenic Local Resolution and EMRinger.

Using Scipion for stream image processing at Cryo-EM facilities.

Three dimensional electron microscopy is becoming a very data-intensive field in which vast amounts of experimental images are acquired at high speed. To manage such large-scale projects, we had previously developed a modular workflow system called Scipion (de la Rosa-Trevín et al., 2016). We present here a major extension of Scipion that allows processing of EM images while the data is being acquired. This approach helps to detect problems at early stages, saves computing time and provides users with a detailed evaluation of the data quality before the acquisition is finished. At present, Scipion has been deployed and is in production mode in seven Cryo-EM facilities throughout the world.

Local analysis of strains and rotations for macromolecular electron microscopy maps.

Macromolecular complexes perform their physiological functions by local rearrangements of their constituents and biochemically interacting with their reaction partners. These rearrangements may involve local rotations and the induction of local strains causing different mechanical efforts and stretches at the different areas of the protein. The analysis of these local deformations may reveal important insight into the way proteins perform their tasks. In this paper we introduce a method to perform this kind of local analysis using Electron Microscopy volumes in a fully objective and automatic manner. For doing so, we exploit the continuous nature of the result of an elastic image registration using B-splines as its basis functions. We show that the results obtained by the new automatic method are consistent with previous observations on these macromolecules.

Fast and automatic identification of particle tilt pairs based on Delaunay triangulation.

Random conical tilt (RCT) and orthogonal tilt reconstruction (OTR) are two remarkable methods for reconstructing the three-dimensional structure of macromolecules at low resolution. These techniques use two images at two different sample tilts. One of the most demanding steps in these methods at the image processing level is to identify corresponding particles on both micrographs, and manual or semiautomatic matching methods are usually used. Here we present an approach to solve this bottleneck with a fully automatic method for assigning particle tilt pairs. This new algorithm behaves correctly with a variety of samples, covering the range from small to large macromolecules and from sparse to densely populated fields of view. It is also more rapid than previous approaches. The roots of the method lie in a Delaunay triangulation of the set of independently picked coordinates on both the untilted and tilted micrographs. These triangulations are then used to search an affine transformation between the untilted and tilted triangles. The affine transformation that maximizes the number of correspondences between the two micrographs defines the coordinate matching.

Scipion: A software framework toward integration, reproducibility and validation in 3D electron microscopy.

In the past few years, 3D electron microscopy (3DEM) has undergone a revolution in instrumentation and methodology. One of the central players in this wide-reaching change is the continuous development of image processing software. Here we present Scipion, a software framework for integrating several 3DEM software packages through a workflow-based approach. Scipion allows the execution of reusable, standardized, traceable and reproducible image-processing protocols. These protocols incorporate tools from different programs while providing full interoperability among them. Scipion is an open-source project that can be downloaded from http://scipion.cnb.csic.es.

On bias, variance, overfitting, gold standard and consensus in single-particle analysis by cryo-electron microscopy.

Cryo-electron microscopy (cryoEM) has become a well established technique to elucidate the 3D structures of biological macromolecules. Projection images from thousands of macromolecules that are assumed to be structurally identical are combined into a single 3D map representing the Coulomb potential of the macromolecule under study. This article discusses possible caveats along the image-processing path and how to avoid them to obtain a reliable 3D structure. Some of these problems are very well known in the community. These may be referred to as sample-related (such as specimen denaturation at interfaces or non-uniform projection geometry leading to underrepresented projection directions). The rest are related to the algorithms used. While some have been discussed in depth in the literature, such as the use of an incorrect initial volume, others have received much less attention. However, they are fundamental in any data-analysis approach. Chiefly among them, instabilities in estimating many of the key parameters that are required for a correct 3D reconstruction that occur all along the processing workflow are referred to, which may significantly affect the reliability of the whole process. In the field, the term overfitting has been coined to refer to some particular kinds of artifacts. It is argued that overfitting is a statistical bias in key parameter-estimation steps in the 3D reconstruction process, including intrinsic algorithmic bias. It is also shown that common tools (Fourier shell correlation) and strategies (gold standard) that are normally used to detect or prevent overfitting do not fully protect against it. Alternatively, it is proposed that detecting the bias that leads to overfitting is much easier when addressed at the level of parameter estimation, rather than detecting it once the particle images have been combined into a 3D map. Comparing the results from multiple algorithms (or at least, independent executions of the same algorithm) can detect parameter bias. These multiple executions could then be averaged to give a lower variance estimate of the underlying parameters.

Local resolution estimates of cryoEM reconstructions.

The field of cryoEM has quickly advanced in last years with the new biochemical, technological, methodological and computational developments. It has allowed significant progresses in Structural Biology, typically reaching quasi-atomic resolutions in the reconstructed maps. However, this rapid advance has also generated new questions relevant to resolution estimates. The global resolution metrics and their criteria have been deeply discussed in the last decade, but despite that, it remains as an important issue in the field. Recently, the introduction of local resolution measurements has changed how cryoEM reconstructions are interpreted, providing information about the existence of heterogeneity, flexibility, and angular assignment errors, and using it as a tool to aid in modeling. In this review we revisit the concept of local resolution and the different algorithms in the current state of the art. However, the concept of local resolution is not uniquely defined, and each implementation measures different features. This may lead to inappropriate interpretation of local resolution maps. Hence, a set of good practices is provided in this review to avoid misleading and over-interpretation of the reconstructions.

Measurement of local resolution in electron tomography.

Resolution (global and local) is one of the most reported metrics of quality measurement in Single Particle Analysis (SPA). However, in electron tomography, the situation is different and its computation is not straightforward. Typically, resolution estimation is global and, therefore, reduces the assessment of a whole tomogram to a single number. However, it is known that tomogram quality is spatially variant. Still, up to our knowledge, a method to estimate local quality metrics in tomography is lacking. This work introduces MonoTomo, a method developed to estimate locally in a tomogram the highest reliable frequency component, expressed as a form of local resolution. The fundamentals lie in a local analysis of the density map via monogenic signals, which, in analogy to MonoRes, allows for local estimations. Results with experimental data show that the local resolution range that MonoTomo casts agrees with reported resolution values for experimental data sets, with the advantage of providing a local estimation. A range of applications of MonoTomo are suggested for further exploration.

Flexible workflows for on-the-fly electron-microscopy single-particle image processing using Scipion.

Electron microscopy of macromolecular structures is an approach that is in increasing demand in the field of structural biology. The automation of image acquisition has greatly increased the potential throughput of electron microscopy. Here, the focus is on the possibilities in Scipion to implement flexible and robust image-processing workflows that allow the electron-microscope operator and the user to monitor the quality of image acquisition, assessing very simple acquisition measures or obtaining a first estimate of the initial volume, or the data resolution and heterogeneity, without any need for programming skills. These workflows can implement intelligent automatic decisions and they can warn the user of possible acquisition failures. These concepts are illustrated by analysis of the well known 2.2 Šresolution ß-galactosidase data set.

Survey of the analysis of continuous conformational variability of biological macromolecules by electron microscopy.

Single-particle analysis by electron microscopy is a well established technique for analyzing the three-dimensional structures of biological macromolecules. Besides its ability to produce high-resolution structures, it also provides insights into the dynamic behavior of the structures by elucidating their conformational variability. Here, the different image-processing methods currently available to study continuous conformational changes are reviewed.

Advances in image processing for single-particle analysis by electron cryomicroscopy and challenges ahead.

Electron cryomicroscopy (cryoEM) is essential for the study and functional understanding of non-crystalline macromolecules such as proteins. These molecules cannot be imaged using X-ray crystallography or other popular methods. CryoEM has been successfully used to visualize macromolecular complexes such as ribosomes, viruses, and ion channels. Determination of structural models of these at various conformational states leads to insight on how these molecules function. Recent advances in imaging technology have given cryoEM a scientific rebirth. As a result of these technological advances image processing and analysis have yielded molecular structures at atomic resolution. Nevertheless there continue to be challenges in image processing, and in this article we will touch on the most essential in order to derive an accurate three-dimensional model from noisy projection images. Traditional approaches, such as k-means clustering for class averaging, will be provided as background. We will then highlight new approaches for each image processing subproblem, including a 3D reconstruction method for asymmetric molecules using just two projection images and deep learning algorithms for automated particle picking.

Thermal stability increase in metallic nanoparticles-loaded cellulose nanocrystal nanocomposites.

Due to the potential of CNC-based flexible materials for novel industrial applications, the aim of this work is to improve the thermal stability of cellulose nanocrystals (CNC) films through a straightforward and scalable method. Based of nanocomposite approach, five different metallic nanoparticles (ZnO, SiO2, TiO2, Al2O3 and Fe2O3) have been co-assembled in water with CNCs to obtain free-standing nanocomposite films. Thermogravimetric analysis (TGA) reveals an increased thermal stability upon nanoparticle. This increase in the thermal stability reaches a maximum of 75°C for the nanocomposites having 10wt% of Fe2O3 and ZnO. The activation energies of thermodegradation process (Ea) determined according to Kissinger and Ozawa-Flynn-Wall methods further confirm the delayed degradation of CNC nanocomposites upon heating. Finally, the changes induced in the crystalline structure during thermodegradation were followed by wide angle X-ray diffraction (WAXD). It is also observed that thermal degradation proceeds at higher temperatures for nanocomposites having metallic nanoparticles. Overall, experimental findings here showed make nanocomposite approach a simple low-cost environmentally-friendly strategy to overcome the relatively poor thermal stability of CNCs when extracted via sulfuric acid assisted hydrolysis of cellulose.

Magnetic cellulose nanocrystal nanocomposites for the development of green functional materials.

A magnetic cellulosic material composed of cellulose nanocrystals (CNC) and cobalt ferrite (CoFe2O4) nanoparticles was developed through evaporation-induced self-assembly (EISA). Nanoparticles demonstrated good dispersibility within the cellulose nanocrystal template. The addition of glucose to CNC network allows the development of homogeneous crack-free CNC-based films and does no modify neither the morphology nor the optical properties. In contrast, the introduction of CoFe2O4 nanoparticles produces a marked decrease in the amount of the transmitted light. 20wt.% of CoFe2O4 nanoparticles inside the CNC matrix induced a maximum magnetization value of 12.96emug-1, increased the real part of the dielectric constant (permittivity) from 10 (pure CNC film) to 12 and improved the thermostability of the nanocomposite as evidenced by the increase of the onset temperature from 165.1 to 220.4°C. Those features obtained in a non-petroleum-based composite provide insight into the development of the next generation of functional materials from natural origin.