RESUMO
Carbon nanotubes (CNT) are attractive for use in fiber-reinforced composite materials due to their very high aspect ratio, combined with outstanding mechanical and electrical properties. Composite materials comprising a collagen matrix with embedded CNT were prepared by mixing solubilized Type I collagen with solutions of carboxylated single-walled carbon nanotubes (SWNT) at concentrations of 0, 0.2, 0.4, 0.8, and 2.0 weight percent. Living smooth muscle cells were incorporated at the time of collagen gelation to produce cell-seeded collagen-CNT composite matrices. Constructs containing 2.0 wt % CNT exhibited delayed gel compaction, relative to lower concentrations that compacted at the same rate as pure collagen controls. Cell viability in all constructs was consistently above 85% at both Day 3 and Day 7, whereas cell number in CNT-containing constructs was lower than in control constructs at Day 3, though statistically unchanged by Day 7. Scanning electron microscopy showed physical interactions between CNT and collagen matrix. Raman spectroscopy confirmed the presence of CNT at the expected diameter (0.85-1.30 nm), but did not indicate strong molecular interactions between the collagen and CNT components. Such collagen-CNT composite matrices may have utility as scaffolds in tissue engineering, or as components of biosensors or other medical devices.
Assuntos
Materiais Biocompatíveis , Colágeno , Nanotubos de Carbono , Engenharia Tecidual , Animais , Células Cultivadas , Microscopia Eletrônica de Varredura , Modelos Biológicos , Miócitos de Músculo Liso/ultraestrutura , Nanotubos de Carbono/ultraestrutura , Ratos , Análise Espectral RamanAssuntos
DNA/administração & dosagem , DNA/genética , Nanotecnologia/métodos , Nanotubos de Carbono/química , Modificação Traducional de Proteínas/fisiologia , Ativação Transcricional/fisiologia , Triticum/genética , Células Cultivadas , DNA/química , Portadores de Fármacos/química , Substâncias Macromoleculares/química , Transfecção/métodosRESUMO
Electrospinning is a versatile process used to prepare micro- and nano- sized fibers from various polymers dissolved in volatile solvents. In this report, cellulose and cellulose-heparin composite fibers are prepared from nonvolatile room temperature ionic liquid (RTIL) solvents by electrospinning. RTILs are extracted from the biopolymer fiber after the fiber formation using a cosolvent. Micron to nanometer sized, branched fibers were obtained from 10% (w/w) concentration of polysaccharide biopolymer in RTIL solution with an applied voltage of 15-20 kV. Cellulose-heparin composite fibers showed anticoagulant activity, demonstrating that the bioactivity of heparin remained unaffected even on exposure to a high voltage involved in electrospinning.
Assuntos
Biopolímeros/química , Celulose/química , Heparina/química , Nanoestruturas/química , Temperatura , Eletroquímica , Microscopia Eletrônica de Varredura , Tamanho da Partícula , Sensibilidade e Especificidade , Solventes/química , Propriedades de SuperfícieRESUMO
We demonstrate the one-step synthesis of a silica-gold nanocomposite by simultaneous hydrolysis and reduction of gold chloride. The aminophenyl group was used as a reducing agent, and the trimethoxy silane group acts a precursor for the formation of silica. The porous gold nanoparticles were formed by etching out the silica-gold nanocomposite by hydrofluoric acid. The electron diffraction of porous gold nanoparticles showed that the particle are polycrystalline with FCC structure. The silica-gold nanocomposite exhibited nonlinear current-voltage behavior, and the porous gold nanoparticles displayed linear current-voltage behavior.
Assuntos
Ouro/química , Nanopartículas Metálicas/química , Nanopartículas Metálicas/ultraestrutura , Nanocompostos/química , Nanocompostos/ultraestrutura , Dióxido de Silício/química , Microscopia Eletrônica de Transmissão , Porosidade , EspectrofotometriaRESUMO
We present the fabrication and electrical characterization of a flexible hybrid composite structure using aligned multiwall carbon nanotube arrays in a poly(dimethylsiloxane) (PDMS) matrix. Using lithographically patterned nanotube arrays, one can make these structures at any length scale from submicrometer levels to bulk quantities. The PDMS matrix undergoes excellent conformal filling within the dense nanotube network, giving rise to extremely flexible conducting structures with unique electromechanical properties. We demonstrate its robustness against high stress conditions, under which the composite is found to retain its conducting nature. We also demonstrate that these structures can be utilized directly as flexible field-emission devices. Our devices show some of the best field-enhancement factors and turn-on electric fields reported so far.
RESUMO
An in situ composite synthesis technique has been developed by grafting polystyrene chains onto single-wall carbon nanotubes (SWNTs) via a single-step debundling/polymerization scheme. The method, based on established anionic polymerization techniques, eliminates the need for nanotube pretreatment prior to functionalization and allows attachment of polymer molecules to pristine tubes without altering their original structure. The composites obtained contain well-dispersed SWNTs with good nanotube-matrix interaction. The scheme is quite general in nature and can be applied to different polymer systems. The simplicity and scalability of the process can lead to the realization of superior nanotube-based polymer composites for applications as advanced multifunctional structural materials.