Environmental impacts due to the use of sunscreen products: a mini-review.

Sunscreen use has increased in recent years, as sunscreen products minimize the damaging effects of solar radiation. Active ingredients called ultraviolet (UV) filters or UV agents, either organic or inorganic, responsible for defending skin tissue against harmful UV rays, are incorporated in sunscreen formulations. UV agents have a serious impact on many members of bio communities, and they are transferred to the environment either directly or indirectly. Many organic UV filters are found to be accumulated in marine environments because of high values of the octanol/water partition coefficient. However, due to the fact that UV agents are not stable in water, unwanted by-products may be formed. Experimental studies or field observations have shown that organic UV filters tend to bioaccumulate in various aquatic animals, such as corals, algae, arthropods, mollusks, echinoderms, marine vertebrates. This review was conducted in order to understand the effects of UV agents on both the environment and marine biota. In vivo and in vitro studies of UV filters show a wide range of adverse effects on the environment and exposed organisms. Coral bleaching receives considerable attention, but the scientific data identify potential toxicities of endocrine, neurologic, neoplastic and developmental pathways. However, more controlled environmental studies and long-term human use data are limited. Several jurisdictions have prohibited specific UV filters, but this does not adequately address the dichotomy of the benefits of photoprotection vs lack of eco-friendly, safe, and approved alternatives.

Melatonin/Cyclodextrin Inclusion Complexes: A Review.

Melatonin (MLT) is involved in many functions of the human body, mainly in sleeping-related disorders. It also has anti-oxidant potential and has been proven very effective in the treatment of seasonal affective disorders (SAD), which afflict some people during short winter days. Melatonin has been implicated in a range of other conditions, including Parkinson's disease, Alzheimer's and other neurological conditions, and in certain cancers. Its poor solubility in water leads to an insufficient absorption that led scientists to investigate MLT inclusion in cyclodextrins (CDs), as inclusion of drugs in CDs is a way of increasing the solubility of many lipophilic moieties with poor water solubility. The aim of this review is to gather all the key findings on MLT/CD complexes. The literature appraisal concluded that MLT inclusion leads to a 1:1 complex with the majority of CDs and increases the solubility of the hormone. The interactions of MLT with CDs can be studied by a variety of techniques, such as NMR, FT-IR, XRD and DCS. More importantly, the in vivo experiments showed an increase in the uptake of MLT when included in a CD.

Block copolymers based on poly(butylene adipate) and poly(L-lactic acid) for biomedical applications: synthesis, structure and thermodynamical studies.

This work describes the synthesis of poly(butylene adipate) (PBAd), by melt polycondensation, poly(l-lactic acid) (PLLA), by ring opening polymerization, and the new block copolymer PLLA/PBAd in ratios 90/10, 95/5, 75/25 and 50/50. Due to the biocompatibility and low toxicity of neat PBAd and PLLA, these copolymers are suitable to be used in biomedical applications. The 1H and 13C nuclear magnetic resonance spectroscopy techniques were employed for structural characterization. The thermal transitions, with an emphasis on crystallization, were assessed by differential scanning calorimetry, supplemented by X-ray diffraction and polarized optical microscopy. Molecular mobility studies were conducted using two advanced techniques, broadband dielectric spectroscopy and thermally stimulated depolarization currents. The results from the structural techniques, in combination with each other, provided proof of the presence of PLLA and PBAd blocks and, moreover, the successful copolymer synthesis. The overall data showed that the different co-polymer compositions result directly in severe changes in the polymer crystal distribution and, indirectly, the formation of PBAd micro/nano domains surrounded by PLLA. Furthermore, it was demonstrated that both the continuity of the two polymers throughout the copolymer volume and the semicrystalline morphology can be tuned to a wide extent. The latter makes these systems quite promising envisaging biomedical applications, including the encapsulation of small molecules, e.g. drug solutions. The molecular mobility map was constructed for these systems for the first time, revealing the local (short scale) and segmental (larger nm scale) mobility of PBAd and PLLA, as well as intermediate behaviors of the copolymers.

Biophysical Evaluation and In Vitro Controlled Release of Two Isomeric Adamantane Phenylalkylamines with Antiproliferative/Anticancer and Analgesic Activity.

The aqueous dissolution profile of the isomeric synthetic adamantane phenylalkylamine hydrochlorides I and II was probed. These adducts have shown significant antiproliferative/anticancer activity associated with an analgesic profile against neuropathic pain. They are both devoid of toxic effects and show appreciable enzymatic human plasma stability. The structures of these two compounds have been elucidated using 2D NMR experiments, which were used to study their predominant conformations. Compound II's scaffold appeared more flexible, as shown by the NOE spatial interactions between the alkyl bridge chain, the aromatic rings, and the adamantane nucleus. Conversely, compound I appeared very rigid, as it did not share significant NOEs between the aforementioned structural segments. MD simulations confirmed the NOE results. The aqueous dissolution profile of both molecules fits well with their minimum energy conformers' features, which stem from the NOE data; this was nicely demonstrated, especially in the case of compound II.

UV Filters and Their Distribution on the Skin through Safe, Non-Penetrating Vehicles.

The effects of ultraviolet (UV) radiation trigger human skin reaction, which can result in erythema, photoaging, and/or skin cancer. Sunscreens play an important role against the negative effects of UV radiation on the human skin. However, they should satisfy certain criteria, with the main one being photostability, to avoid the formation of health-threatening reactive intermediates. It has to be kept in mind, however, that photo-stable UV filters have the undesirable propensity to transfer energy to molecular oxygen and generate the very reactive singlet oxygen. They should also be well tolerated, while at the same time, they should not permeate into the skin and cause toxic effects. Thus, there is an ongoing need to develop effective and safe non-penetrating sunscreen formulations. The search for innovative active substances, efficacious combinations, and the design of vehicles or carriers has led to the implementation of advanced delivery systems. This study intended to review the commonly used UV radiation thwarting agents (organic and inorganic UV filters), compile the relevant toxicity studies, evaluate their margin of safety, and assess the current situation on innovative sunscreen formulations.

Comparative In Vitro Controlled Release Studies on the Chronobiotic Hormone Melatonin from Cyclodextrins-Containing Matrices and Cyclodextrin: Melatonin Complexes.

A series of hydrophilic matrix tablets was prepared and tested with respect to their ability to release the hormone melatonin in a controlled manner, in order to alleviate sleep onset and sleep maintenance dysfunctions. Besides the active ingredient, the tablets were comprised of combinations of the following: HPMC K 15M, low viscosity sodium alginate, microcrystalline cellulose (Avicel PH 102), magnesium stearate, and the cyclodextrins, α-CD, ß-CD, γ-CD, HP-ß-CD, sulfated ß-CD, HP-α-CD and HP-γ-CD, and MLT (guest):CD (host) complexes of the above cyclodextrins, in 1:1 ratio. The controlled release studies were conducted in two aqueous dissolution media at pH 1.2 and 7.4. The stoichiometry of the formed complexes was examined by applying the continuous variation method (Job plot), while the stability constants were calculated by monitoring the spectrophotometric properties of free and CD-encapsulated melatonin (UV-Vis). Host-guest interactions were studied by Nuclear Magnetic Resonance (NMR) spectroscopy. The dissolution data suggest that melatonin is released faster from the MLT:CD complexes than from the rest matrix systems. This enhancement in the dissolution rate and the % release of melatonin from the complexes is due to the increased solubility of the MLT:CD complexes.

In vitro Modified Release Studies on Melatoninergic Fluorinated Phenylalkylamides: Circumventing their Lipophilicity for Oral Administration.

INTRODUCTION: In an attempt to circumvent the lipophilicity burden for the oral administration of new potent synthetic melatoninergic fluorine-substituted methoxyphenylalkyl amides, we conducted in vitro modified release studies using carefully selected matrix tablets' biopolymeric materials in different ratios. METHODS: In particular, we sought to attain release profiles of these analogues similar to that of the parent compound, the chronobiotic hormone Melatonin (MLT), and also of the commercially available drug, Circadin®. RESULTS: It was found that some of these systems, albeit being more lipophilic than MLT, mimic the in vitro release patterns of melatonin and Circadin®. CONCLUSION: Moreover, a number of these derivatives were proven suitable for dealing with sleep onset problems, whilst others for dealing with combined sleep onset/sleep maintenance dysfunctions.

In Vitro Profile of Hydrocortisone Release from Three-Dimensionally Printed Paediatric Mini-Tablets.

Three-dimensional (3D) printing is quickly being adopted in pharmaceutics due to the many advantages it offers, including treatment, adaptability, the reduction in waste and the accelerated development of new formulations. In this study, micro-extrusion printing was implemented for the production of modified-release hydrocortisone (HCT) mini-tablets for paediatric patients. For the developed formulations, Gelucire® 44/14 and Precirol® ATO 5 were used as the main inks at three different ratios: 70%/30%, 60%/40% and 50%/50%, respectively. The printing parameters (temperature and pressure) were altered accordingly for each ratio to achieve printability. The printed mini-tablets exhibited excellent printing quality, featuring consistent layer thicknesses and smooth surfaces. Dissolution tests were performed, and the results indicated a successful modified release of HCT from the mini-tablets. In summary, micro-extrusion exhibited favourable processing abilities for powder blends, facilitating quick printing and the fabrication of potential personalized dosages.

Design and Development of Low- and Medium-Viscosity Alginate Beads Loaded with Pluronic® F-127 Nanomicelles.

The anionic polymer sodium alginate, a linear copolymer of guluronic and mannuronic acids, is primarily present in brown algae. Copolymers are used in the sodium alginate preparation process to confer on the material strength and flexibility. Micelles and other polymeric nanoparticles are frequently made using the triblock copolymer Pluronic® F-127. The purpose of the present study is to determine the effect of sodium alginate's viscosity (low and medium) and the presence of Pluronic® F-127 micelles on the swelling behavior of the prepared pure beads and those loaded with Pluronic® F-127 micelles. The Pluronic® F-127 nanomicelles have a size of 120 nm. The swelling studies were carried out at pH = 1.2 (simulated gastric fluid-SGF) for two hours and at pH = 6.8 (simulated intestinal fluid-SIF) for four more hours. The swelling of both low- and medium-viscosity alginate beads was minor at pH = 1.2, irrespective of the use of Pluronic® F-127 nanomicelles. At pH = 6.8, without Pluronic® F-127, the beads showed an enhanced swelling ratio for the first four hours, which was even higher in the medium-viscosity alginate beads. With the addition of Pluronic® F-127, the beads were dissolved in the first and second hour, in the case of the low- and medium-alginate's viscosity, respectively. In other words, the behavior of the mixed hydrogels was the same during the swelling experiments. Therefore, the presence of Pluronic® F-127 nanomicelles and medium-viscosity sodium alginate leads to a higher swelling ratio. A model drug, acetyl salicylic acid (ASA), was also encapsulated in the mixed beads and ASA's release studies were performed. In conclusion, the prepared systems, which are well characterized, show potential as delivery platforms for the oral delivery of active pharmaceutical ingredients and biopharmaceuticals.

Potent Lipophilic Melatoninergic x-fluoro-y-methoxy Substituted Phenylalkylamides: Molecular Dynamics Calculations and in vitro Modified Release in Aqueous Media from Tablet Formulations.

INTRODUCTION: We report herein on the design and development of matrix tablets containing potent synthetic melatonin (MLT) receptor analogues, the x-fluoro-y-methoxy substitiuted phenylalkylamides (compounds I-IV), the preparation and melatoninergic potency of which was recently communicated. > Methods: The presence of the fluorine atom in compounds I-IV, besides not affecting their binding affinity, compared to the pineal hormone melatonin, it also slows down their metabolism, which is a major drawback of MLT. However, as fluorine increases the lipophilicity, solid pharmaceutical formulations of I-IV, involving the appropriate biopolymers for their modified release in aqueous media, were developed in the context of the present work. > Results: The release profile of analogues I-IV was found to be similar to that of MLT and also of the commercially available drug, Circadin®. Some of these systems are suitable for dealing with sleep onset problems, whilst others for dealing with combined sleep onset/sleep maintenance problems. > Conclusion: Apart from the nature and relevant content of the formulants used, this bimodal release profile of the new analogues depends, to a large extent, on the diverse structural arrangement of their side chains in space, as nicely demonstrated by the molecular dynamics calculations, conducted in the context of this study. >.

Conformational analysis of two novel cytotoxic C2-substituted pyrrolo[2,3-f]quinolines in aqueous media, organic solvents, membrane bilayers and at the putative active site.

We have performed: (i) conformational analysis of two novel cytotoxic C2-substituted pyrrolo[2,3-f]quinolines 5e and 5g in deuterated dimethylsulfoxide (DMSO-d(6)) utilizing NOE results from NMR spectroscopy; (ii) molecular dynamics (MD) calculations in water, DMSO and dimyristoyl phosphatidylcholine bilayers and (iii) molecular docking and MD calculations on DNA nucleotide sequences. The obtained results for the two similar in structure molecules showed differences in: (i) their conformational properties in silico and in media that reasonably simulate the biological environment; (ii) the way they are incorporated into the lipid bilayers and therefore their diffusion ability and (iii) molecular docking capacity as it is depicted from their different binding scores.

Recent Advances in the Excipients Used in Modified Release Vaginal Formulations.

The formulation of an ideal vaginal drug delivery system (DDS), with the requisite properties, with respect to safety, efficacy, patient compliance, aesthetics, harmonization with the regulatory requirements, and cost, requires a meticulous selection of the active ingredients and the excipients used. Novel excipients defined by diversity and multifunctionality are used in order to ameliorate drug delivery attributes. Synthetic and natural polymers are broadly used in pharmaceutical vaginal formulations (solid, semi-solid dosage forms, implantable devices, and nanomedicines) with a promising perspective in improving stability and compatibility issues when administered topically or systemically. Moreover, the use of biopolymers is aiming towards formulating novel bioactive, biocompatible, and biodegradable DDSs with a controllable drug release rate. Overviewing vaginal microenvironment, which is described by variable and perplexed features, a perceptive choice of excipients is essential. This review summarizes the recent advances on the excipients used in modified vaginal drug delivery formulations, in an attempt to aid the formulation scientist in selecting the optimal excipients for the preparation of vaginal products.

Excipients Used for Modified Nasal Drug Delivery: A Mini-Review of the Recent Advances.

The ongoing challenging task in the field of nasal drug delivery is the maintenance of an efficient concentration of the active substance in the target area for an adequate period of time. Thus, there is an urgent need to develop effective new strategies for drug delivery to the nose, using cutting edge technology and materials for this particular type of drug delivery. This review gives an account of the critical components of nasal drug delivery and the parameters influencing drug absorption in the nose, including the excipients required for modified drug administration.

Modified Release of the Pineal Hormone Melatonin from Matrix Tablets Containing Poly(L-lactic Acid) and Its PLA-co-PEAd and PLA-co-PBAd Copolymers.

In terms of drug delivery, the attractive properties of poly(L-lactic acid) (PLA) and its aliphatic polyesters, poly(ethylene adipate) (PEAd) and poly(butylene adipate) (PBAd), render them ideal co-formulants for the preparation of modified-release pharmaceutical formulations. Furthermore, we have previously demonstrated that by adding a "softer" aliphatic polyester onto the macromolecular chain of PLA, i.e., PEAd or PBAd, resulting in the formation of the PLA's copolymers (PLA-co-PEAd and PLA-co-PBAd, in 95/5, 90/10, 75/25 and 50/50 weight ratios), the hydrolysis rate is also severely affected, leading to improved dissolution rates of the active pharmaceutical ingredients (API). In the present report, we communicate our findings on the in vitro modified release of the chronobiotic hormone melatonin (MLT), in aqueous media (pH 1.2 and 6.8), from poly(L-lactic acid) and the aforementioned copolymer matrix tablets, enriched with commonly used biopolymers, such as hydroxypropylmethylcellulose (HPMC K15), lactose monohydrate, and sodium alginate. It was found that, depending on the composition and the relevant content of these excipients in the matrix tablets, the release of MLT satisfied the sought targets for fast sleep onset and sleep maintenance. These findings constitute a useful background for pursuing relevant in vivo studies on melatonin in the future.

Dissolution Assay of Bupropion/Naltrexone Hydrochloride Salts of Bilayer Composition Tablets Following the Development and Validation of a Novel HPLC Method.

Compounded medicinal products containing bupropion hydrochloride (BUP·HCl) and naltrexone hydrochloride (NTX·HCl) are available as adjunct therapy for the management of weight in obese/overweight adults. The present work describes the development and validation of a novel RP-HPLC method for a simultaneous quantitation during the dissolution of both drugs from compounded bilayer composition tablets. The method involves a Nucleosil 100-3 C-18 column (4.6 × 150 mm) and a mobile phase of a 70%/30% v/v ACN/KH2PO4·H2O aqueous solution of a 5 mM concentration. The flow rate was set at 1.35 mL/min and the detection was conducted using UV spectrophotometry (λmax 214 nm). The method was validated according to the ICH guidelines and fulfilled the specifications for the specificity, linearity, accuracy, precision and stability for both the sample and standard solutions. Furthermore, the robustness of the method was evaluated by applying a fractional factorial experimental design and by utilizing both graphical and statistical approaches to identify the HPLC factors that should be strictly controlled during the analysis. The method proved to be suitable for the analysis of the dissolution samples and, consequently, the release of BUP·HCl and NTX·HCl from the formulations.

Investigation of Molecular Weight, Polymer Concentration and Process Parameters Factors on the Sustained Release of the Anti-Multiple-Sclerosis Agent Teriflunomide from Poly(ε-caprolactone) Electrospun Nanofibrous Matrices.

In the current work, a series of PCL polyesters with different molecular weights was synthesized and used for the fabrication of nanofibrous patches via electrospinning, as sustained release matrices for leflunomide's active metabolite, teriflunomide (TFL). The electrospinning conditions for each sample were optimized and it was found that only one material with high Mn (71,000) was able to produce structures with distinct fibers devoid of the presence of beads. The successful preparation of the fibers was determined by scanning electron microscopy (SEM).TFL (10, 20 and 30 wt%) in three different concentrations was incorporated into the prepared nanofibers, which were used in in vitro drug release experiments. The drug-loaded nanofibrous formulations were further characterized by Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC) and powder X-ray diffractometry (XRD).It was found that TFL was incorporated in an amorphous form inside the polymeric nanofibers and that significant molecular interactions were formed between the drug and the polyester. Additionally, in vitro dissolution studies showed that the PCL/TFL-loaded nanofibers exhibit a biphasic release profile, having an initial burst release phase, followed by a sustained release until 250 h. Finally, a kinetic analysis of the obtained profiles revealed that the drug release was directly dependent on the amount TFL incorporated into the nanofibers.

An In Vitro-In Vivo Simulation Approach for the Prediction of Bioequivalence.

The aim of this study was to develop a new in vitro-in vivo simulation (IVIVS) approach in order to predict the outcome of a bioequivalence study. The predictability of the IVIVS procedure was evaluated through its application in the development process of a new generic product of amlodipine/irbesartan/hydrochlorothiazide. The developed IVIVS methodology is composed of three parts: (a) mathematical description of in vitro dissolution profiles, (b) mathematical description of in vivo kinetics, and (c) development of joint in vitro-in vivo simulations. The entire programming was done in MATLAB® and all created scripts were validated through other software. The IVIVS approach can be implemented for any number of subjects, clinical design, variability and can be repeated for thousands of times using Monte Carlo techniques. The probability of success of each scenario is recorded and finally, an overall assessment is made in order to select the most suitable batch. Alternatively, if the IVIVS shows reduced probability of BE success, the R&D department is advised to reformulate the product. In this study, the IVIVS approach predicted successfully the BE outcome of the three drugs. During the development of generics, the IVIVS approach can save time and expenses.

3D-Printed Oral Dosage Forms: Mechanical Properties, Computational Approaches and Applications.

The aim of this review is to present the factors influencing the mechanical properties of 3D-printed oral dosage forms. It also explores how it is possible to use specific excipients and printing parameters to maintain the structural integrity of printed drug products while meeting the needs of patients. Three-dimensional (3D) printing is an emerging manufacturing technology that is gaining acceptance in the pharmaceutical industry to overcome traditional mass production and move toward personalized pharmacotherapy. After continuous research over the last thirty years, 3D printing now offers numerous opportunities to personalize oral dosage forms in terms of size, shape, release profile, or dose modification. However, there is still a long way to go before 3D printing is integrated into clinical practice. 3D printing techniques follow a different process than traditional oral dosage from manufacturing methods. Currently, there are no specific guidelines for the hardness and friability of 3D printed solid oral dosage forms. Therefore, new regulatory frameworks for 3D-printed oral dosage forms should be established to ensure that they meet all appropriate quality standards. The evaluation of mechanical properties of solid dosage forms is an integral part of quality control, as tablets must withstand mechanical stresses during manufacturing processes, transportation, and drug distribution as well as rough handling by the end user. Until now, this has been achieved through extensive pre- and post-processing testing, which is often time-consuming. However, computational methods combined with 3D printing technology can open up a new avenue for the design and construction of 3D tablets, enabling the fabrication of structures with complex microstructures and desired mechanical properties. In this context, the emerging role of computational methods and artificial intelligence techniques is highlighted.

Recent Advances in the Excipients Used for Modified Ocular Drug Delivery.

In ocular drug delivery, maintaining an efficient concentration of the drug in the target area for a sufficient period of time is a challenging task. There is a pressing need for the development of effective strategies for drug delivery to the eye using recent advances in material sciences and novel approaches to drug delivery. This review summarizes the important aspects of ocular drug delivery and the factors affecting drug absorption in the eye including encapsulating excipients (chitosan, hyaluronic acid, poloxamer, PLGA, PVCL-PVA-PEG, cetalkonium chloride, and gelatin) for modified drug delivery.

Probing the Release of Bupropion and Naltrexone Hydrochloride Salts from Biopolymeric Matrices of Diverse Chemical Structures.

In the last decades, the notion of including excipients in the formulations, as inert substances aiding production processes, has changed and they are recently viewed as multifunctional discrete entities. It is now well documented that excipients serve several roles, spreading from the stabilization and modified release, to providing biocompatible properties and targeting moieties. The aim of this study was to develop matrix-based oral drug delivery systems of bupropion hydrochloride (BUP·HCl) and naltrexone hydrochloride (NTX·HCl), suitable for releasing these active substances in a modified manner, providing a stable level of drug release, which is simultaneously therapeutically effective and non-toxic, thus reducing side effects, after a single dose administration, throughout the gastrointestinal tract. The new formulations, employing hydroxypropylmethycellulose (HPMC K15M) (a cellulosic polymer, which, generally hydrates to form a gelatinous layer that is critical to prevent wetting and rapid drug release from the matrices), poly(methacylic acid-co-ethyl acrylate) 1:1 (Eudragit® L100-55: effective for site specific drug delivery in intestine), poly(ethylene oxide) (PEO) (7 × 106: a high molecular weight polymer, water-soluble, in micro-granular powder form), as the rate controlling polymers, were chosen to lead to a "soothing out" release pattern of these drugs, at 0 ≤ t ≤ 120 min. Moreover, the release of the two drugs from the ulvan-based tablets, was found to follow the desired profile, throughout the entire course of the dissolution experiments.