RESUMO
We have experimentally demonstrated broadband tuneable four-wave mixing in AlGaAs nanowires with the widths ranging between 400 and 650 nm and lengths from 0 to 2 mm. We performed a detailed experimental study of the parameters influencing the FWM performance in these devices (experimental conditions and nanowire dimensions). The maximum signal-to-idler conversion range was 100 nm, limited by the tuning range of the pump source. The maximum conversion efficiency, defined as the ratio of the output idler power to the output signal power, was -38 dB. In support of our explanation of the experimentally observed trends, we present modal analysis and group velocity dispersion numerical analysis. This study is what we believe to be a step forward towards realization of all-optical signal processing devices.
RESUMO
Germanium (Ge) is increasingly used as a substrate for high-performance optoelectronics, photovoltaics, and electronic devices. These devices are usually grown on thick and rigid Ge substrates manufactured by classical wafering techniques. Nanomembranes (NMs) provide an alternative to this approach while offering wafer-scale lateral dimensions, weight reduction, waste limitation, and cost effectiveness. Herein, we introduce the Porous germanium Efficient Epitaxial LayEr Release (PEELER) process, which consists of the fabrication of wafer-scale detachable Ge NMs on porous Ge (PGe) and substrate reuse. We demonstrate the growth of Ge NMs with monocrystalline quality as revealed by high-resolution transmission electron microscopy (HRTEM) characterization. Together with the surface roughness below 1 nm, it makes the Ge NMs suitable for growth of III-V materials. Additionally, the embedded nanoengineered weak layer enables the detachment of the Ge NMs. Finally, we demonstrate the wet-etch-reconditioning process of the Ge substrate, allowing its reuse, to produce multiple free-standing NMs from a single parent wafer. The PEELER process significantly reduces the consumption of Ge in the fabrication process, paving the way for a new generation of low-cost flexible optoelectronic devices.
RESUMO
Semiconductor nanowaveguides are the key structure for light-guiding nanophotonics applications. Efficient guiding and confinement of single-mode light in these waveguides require high aspect ratio geometries. In these conditions, sidewall verticality becomes crucial. We fabricated such structures using a top-down process combining electron beam lithography and inductively coupled plasma (ICP) etching of hard masks and GaAs/AlGaAs semiconductors with Al concentrations varying from 0 to 100%. The GaAs/AlGaAs plasma etching was a single-step process using a Cl(2)/BCl(3)/Ar gas mixture with various fractions of N(2). Scanning electron microscope (SEM) observations showed that the presence of nitrogen generated the deposition of a passivation layer, which had a significant effect on sidewall slope. Near-ideal vertical sidewalls were obtained over a very narrow range of N(2), allowing the production of extremely high aspect ratios (>32) for 80 nm wide nanowaveguides.
RESUMO
We have studied theoretically and experimentally the properties of optical surface modes at the hetero-interface between two meta-materials. These meta-materials consisted of two 1D AlGaAs waveguide arrays with different band structures.