Ligand Exchange Reaction between Ferrocene and Multiwalled Carbon Nanotubes: A Contemporary Approach.

Ligand exchange reaction (LER) between carbon nanoparticles and ferrocene (Cp2Fe) was conducted several times, but there was no convincing evidence of half-sandwich CpFe+ coordination to multiwalled carbon nanotubes (MWCNT). In this study, MWCNT is modified by LER with ferrocene using AlCl3/Al as a catalytic system. The modified MWCNT (Fc-MWCNT) are investigated for better understanding of the processes taking place on the surface of MWCNT using different spectroscopic and electrochemical methods. The formation of the Fe-C covalent bond between CpFe+ and MWCNT is confirmed by changes in the Raman spectrum of Fc-MWCNT compared to pristine MWCNT. The densest structure of Fc-MWCNT is investigated by transmission electronic microscopy. According to density-functional theory calculations of the model interaction between Fe and coronene, the Fe-C bond length is 2.1687-2.1855 Å. X-ray photoelectron spectroscopy also confirms the coordination of the Fe atom to MWCNT by analysis of oxidation states of Fe 2p and deconvolution of C 1s. Utilization of cyclic voltammetry corroborated MWCNT modification via LER. These data are important for both theoretical and practical applications due to increased interest in LER-modified compounds in different areas including thermoelectric devices, sensors, and its potential application in the field of molecular machine construction.

Harmonizing Energies: The Interplay Between a Nonplanar SalEn-Type Molecule and a TEMPO Moiety in a New Hybrid Energy-Storing Redox-Conducting Polymer.

Redox-conducting polymers based on SalEn-type complexes have attracted considerable attention due to their potential applications in electrochemical devices. However, their charge transfer mechanisms, physical and electrochemical properties remain unclear, hindering their rational design and optimization. This study aims to establish the influence of monomer geometry on the polymer's properties by investigating the properties of novel nonplanar SalEn-type complexes, poly[N,N'-bis(salicylidene)propylene-2-(hydroxy)diaminonickel(II)], and its analog with 2,2,6,6-tetramethylpiperidinyl-N-oxyl (TEMPO)-substituted bridge (MTS). To elucidate the charge transfer mechanism, operando UV-Vis spectroelectrochemical analysis, electrochemical impedance spectroscopy, and electron paramagnetic resonance are employed. Introducing TEMPO into the bridge moiety enhanced the specific capacity of the poly(MTS) material to 95 mA h g-1, attributed to TEMPO's and conductive backbone's charge storage capabilities. Replacement of the ethylenediimino-bridge with a 1,3-propylenediimino- bridge induced significant changes in the complex geometry and material's morphology, electrochemical, and spectral properties. At nearly the same potential, polaron and bipolaron particles emerged, suggesting intriguing features at the overlap point of the electroactivity potentials ranges of polaron-bipolaron and TEMPO, such as a disruption in the connection between TEMPO and the conjugation chain or intramolecular charge transfer. These results offer valuable insights for optimizing strategies to create organic materials with tailored properties for use in catalysis and battery applications.

Biotransamination of Furan-Based Aldehydes with Isopropylamine: Enzyme Screening and pH Influence.

Furan-based amines are highly valuable compounds which can be directly obtained via reductive amination from easily accessible furfural, 5-(hydroxymethyl)furfural (HMF) and 2,5-diformylfuran (DFF). Herein the biocatalytic amination of these carbonyl derivatives is disclosed using amine transaminases (ATAs) and isopropylamine (IPA) as amine donors. Among the different biocatalysts tested, the ones from Chromobacterium violaceum (Cv-TA), Arthrobacter citreus (ArS-TA), and variants from Arthrobacter sp. (ArRmut11-TA) and Vibrio fluvialis (Vf-mut-TA), afforded high levels of product formation (>80 %) at 100-200 mM aldehyde concentration. The transformations were studied in terms of enzyme and IPA loading. The pH influence was found as a key factor and attributed to the imine/aldehyde equilibrium that can arise from the high reactivity of the carbonyl substrates with a nucleophilic amine such as IPA.

A Thiol-Free Route to Alkyl Aryl Thioethers.

Most existing methods for the synthesis of alkyl aryl thioethers require the use of mercaptans as the starting materials, which comes with practical limitations. Reactions of diaryliodonium salts with xanthate salts, easily prepared from the corresponding alcohols and CS2, under the developed conditions represent an operationally simple, thiol-free method for the synthesis of these valuable compounds. The protocol features high functional group tolerance and can be applied to the late-stage C-H functionalization and for the introduction of a CD3S group.

The ab initio potential energy curves of atom pairs and transport properties of high-temperature vapors of Cu and Si and their mixtures with He, Ar, and Xe gases.

The potential energy curves (PECs) for the homonuclear He-He, Ar-Ar, Cu-Cu, and Si-Si dimers, as well as heteronuclear Cu-He, Cu-Ar, Cu-Xe, Si-He, Si-Ar, and Si-Xe dimers, are obtained in quantum Monte Carlo (QMC) calculations. It is shown that the QMC method provides the PECs with an accuracy comparable with that of the state-of-the-art coupled cluster singles and doubles with perturbative triples corrections [CCSD(T)] calculations. The QMC data are approximated by the Morse long range (MLR) and (12-6) Lennard-Jones (LJ) potentials. The MLR and LJ potentials are used to calculate the deflection angles in binary collisions of corresponding atom pairs and transport coefficients of Cu and Si vapors and their mixtures with He, Ar, and Xe gases in the range of temperature from 100 K to 10 000 K. It is shown that the use of the LJ potentials introduces significant errors in the transport coefficients of high-temperature vapors and gas mixtures. The mixtures with heavy noble gases demonstrate anomalous behavior when the viscosity and thermal conductivity can be larger than that of the corresponding pure substances. In the mixtures with helium, the thermal diffusion factor is found to be unusually large. The calculated viscosity and diffusivity are used to determine parameters of the variable hard sphere and variable soft sphere molecular models as well as parameters of the power-law approximations for the transport coefficients. The results obtained in the present work include all information required for kinetic or continuum simulations of dilute Cu and Si vapors and their mixtures with He, Ar, and Xe gases.

Soy Protein as a Part of a Low-protein Diet is a New Direction in Cardio- and Nephroprotection in Patients With 3b-4 Stages of Chronic kidney Disease.

It has been established that the use of a low-protein diet (LPD) in combination with ketoanalogues of essential amino acids (KA) can contribute to cardio and nephroprotection in chronic kidney disease (CKD). Moreover, it has been shown that partial replacement of the animal protein with soy protein (SP) in the diet contributed to more pronounced nephro and cardioprotection in CKD, however, the data, available in the literature, are mainly represented by experimental studies. AIM OF THE STUDY: We conducted a prospective randomized controlled clinical study that compared the effects of 2 types of diets on the main parameters of nephro and cardioprotection in patients with CKD. MATERIALS AND METHODS: The study included 85 CKD 3b-4 stages G3b-4 patients, compliant to LPD (0.6 g of protein/kg of body weight) + KA (1 tablet/5 kg of body weight). 43 patients (Group 1) received LPD with substitution of animal protein with soy (60% SP + 40% of other vegetable proteins) + KA, and 42 patients (control group (Group 2) received conventional LPD (60% animal protein +40% of vegetable protein) + KA, within 12 months. RESULTS: Substitution of animal protein with SP in diet of patients with CKD to a greater extent delayed the decrease in eGFR (-5.9% vs -11.3%, P = .048), the increase in left ventricle hypertrophy (+4.7% vs +12.3%, P = .042), as well as the increase in central systolic blood pressure (+2.6% vs +13.0%, P = .021), augmentation index (+7.6% vs +23.3%, P = .010), slowed down the decrease in lean body mass in males (+0.9% vs -11.2%, P = .017) and females (-1.8% vs -10.3%, P = .024), increase in phosphorus (-10.3% vs +13.0%, P = .029), cholesterol (-10.7% vs -3.4% P = .047) and urea (+6.3% vs +19.6%, P = .035) serum levels. CONCLUSION: The use of LPD with substitution of animal protein with SP + KA provides more pronounced effect on nephro and cardioprotection as well as maintenance of nutritional status, than conventional LPD + KA in patients with CKD 3b-4 stages.

The Effect of Non-Solvent Nature on the Rheological Properties of Cellulose Solution in Diluted Ionic Liquid and Performance of Nanofiltration Membranes.

The weak point of ionic liquids is their high viscosity, limiting the maximum polymer concentration in the forming solutions. A low-viscous co-solvent can reduce viscosity, but cellulose has none. This study demonstrates that dimethyl sulfoxide (DMSO), being non-solvent for cellulose, can act as a nominal co-solvent to improve its processing into a nanofiltration membrane by phase inversion. A study of the rheology of cellulose solutions in diluted ionic liquids ([EMIM]Ac, [EMIM]Cl, and [BMIM]Ac) containing up to 75% DMSO showed the possibility of decreasing the viscosity by up to 50 times while keeping the same cellulose concentration. Surprisingly, typical cellulose non-solvents (water, methanol, ethanol, and isopropanol) behave similarly, reducing the viscosity at low doses but causing structuring of the cellulose solution and its phase separation at high concentrations. According to laser interferometry, the nature of these non-solvents affects the mass transfer direction relative to the forming membrane and the substance interdiffusion rate, which increases by four-fold when passing from isopropanol to methanol or water. Examination of the nanofiltration characteristics of the obtained membranes showed that the dilution of ionic liquid enhances the rejection without changing the permeability, while the transition to alcohols increases the permeability while maintaining the rejection.

Cell-Molecular Interactions of Nano- and Microparticles in Dental Implantology.

The role of metallic nano- and microparticles in the development of inflammation has not yet been investigated. Soft tissue biopsy specimens of the bone bed taken during surgical revisions, as well as supernatants obtained from the surface of the orthopedic structures and dental implants (control), were examined. Investigations were performed using X-ray microtomography, X-ray fluorescence analysis, and scanning electron microscopy. Histological studies of the bone bed tissues were performed. Nanoscale and microscale metallic particles were identified as participants in the inflammatory process in tissues. Supernatants containing nanoscale particles were obtained from the surfaces of 20 units of new dental implants. Early and late apoptosis and necrosis of immunocompetent cells after co-culture and induction by lipopolysaccharide and human venous blood serum were studied in an experiment with staging on the THP-1 (human monocytic) cell line using visualizing cytometry. As a result, it was found that nano- and microparticles emitted from the surface of the oxide layer of medical devices impregnated soft tissue biopsy specimens. By using different methods to analyze the cell-molecule interactions of nano- and microparticles both from a clinical perspective and an experimental research perspective, the possibility of forming a chronic immunopathological endogenous inflammatory process with an autoimmune component in the tissues was revealed.

Structural Features of Monoethanolamine Aqueous Solutions with Various Compositions: A Combined Experimental and Theoretical Study Using Vibrational Spectroscopy.

In this work, we studied aqueous solutions of monoethanolamine (MEA), which are widely used to remove CO2 from flue and oil gases. This study combined experimental and theoretical methods of vibrational spectroscopy, using high-temperature infrared spectroscopy, quantum-chemical calculations of theoretical vibrational spectra, and structural electronic and energy characteristics of model structures. MEA has a propensity to form associations between various compositions and structures with water molecules, as well as those composed solely of water molecules. The structural and energy characteristics of such associates were analyzed in terms of their ability to interact and retain carbon dioxide. The influence of elevated temperatures and concentration of aqueous MEA solution on change in the structure of associates has also been investigated. An analysis of theoretical and experimental vibrational spectra allowed us to examine the IR spectra of MEA solutions, and identify the bands responsible for the formation of associates that would sorb CO2 well, but would delay its desorption from the solution.

Chirality-Dependent Mechanical Properties of Bundles and Thin Films Composed of Covalently Cross-Linked Carbon Nanotubes.

The effect of nanotube chirality on the mechanical properties of materials composed of single-walled carbon nanotubes (CNTs) is poorly understood since the interfacial load transfer in such materials is strongly dependent on the intertube interaction and structure of the nanotube network. Here, a combined atomistic-mesoscopic study is performed to reveal the effect of CNT diameter on the deformation mechanisms and mechanical properties of CNT bundles and low-density CNT films with covalent cross-links (CLs). First, the pullout of the central nanotube from bundles composed of seven (5,5), (10,10), (20,20), (17,0), and (26,0) CNTs is studied in molecular dynamics simulations based on the ReaxFF force field. The simulations show that the shear modulus and strength increase with decreasing CNT diameter. The results of atomistic simulations are used to parametrize a mesoscopic model of CLs and to perform mesoscopic simulations of in-plane tension and compression of thin films composed of thousands of cross-linked CNTs. The mechanical properties of CNT films are found to be strongly dependent on CNT diameter. The film modulus increases as the CNT diameter increases, while the tensile strength decreases. The in-plane compression is characterized by collective bending of whole films and order-of-magnitude smaller compressive strengths. The films composed of (5,5) CNTs exhibit the ability for large-strain compression without irreversible changes in the material structure. The stretching rigidity of individual nanotubes and volumetric CL density are identified as the key factors that dominate the effect of CNT chirality on the mechanical properties of CNT films. The film modulus is affected by both CL density and stretching rigidity of CNTs, while the tensile strength is dominated by CL density. The obtained results suggest that the on-demand optimization of the mechanical properties of CNT films can be performed by tuning the nanotube chirality distribution.

Visible-Light-Driven Thioesterification of Aryl Halides with Potassium Thiocarboxylates: Transition-Metal Catalyst-Free Incorporation of Sulfur Functionalities into an Aromatic Ring.

Reactions of acceptor-substituted aryl iodides and bromides with potassium thiocarboxylates under white light irradiation allow for the preparation of S-aryl thioesters including synthetically versatile S-aryl thioacetates. This transition-metal and external photocatalyst-free method features extremely mild reaction conditions compared with those used in transition-metal-catalyzed protocols. Reactions proceed via the initial formation of an electron donor-acceptor (EDA) complex in the ground state, which was supported by UV-vis spectra. Electron paramagnetic resonance (EPR) spin-trapping experiments using phenyl-N-tert-butylnitrone (PBN) have revealed the radical nature of the reaction.

Immunopathological Inflammation in the Evolution of Mucositis and Peri-Implantitis.

The purpose of this study was to provide an immuno-mediated substantiation of the etiopathogenesis of mucositis and peri-implantitis based on the results of experimental, laboratory and clinical studies. The biopsy material was studied to identify impregnated nanoscale and microscale particles in the structure of pathological tissues by using X-ray microtomography and X-ray fluorescence analyses. Electron microscopy with energy-dispersive analysis identified the composition of supernatants containing nanoscale metal particles obtained from the surfaces of dental implants. The parameters of the nanoscale particles were determined by dynamic light scattering. Flow cytometry was used to study the effect of nanoscale particles on the ability to induce the activation and apoptosis of immunocompetent cells depending on the particles' concentrations during cultivation with the monocytic cell line THP-1 with the addition of inductors. An analysis of the laboratory results suggested the presence of dose-dependent activation, as well as early and late apoptosis of the immunocompetent cells. Activation and early and late apoptosis of a monocytic cell line when THP-1 was co-cultured with nanoscale metal particles in supernatants were shown for the first time. When human venous blood plasma was added, both activation and early and late apoptosis had a dose-dependent effect and differed from those of the control groups.

Tuning the Charge Transport in Nickel Salicylaldimine Polymers by the Ligand Structure.

The conductivity of the polymeric energy storage materials is the key factor limiting their performance. Conductivity of polymeric NiSalen materials, a prospective class of energy storage materials, was found to depend strongly on the length of the bridge between the nitrogen atoms of the ligand. Polymers obtained from the complexes containing C3 alkyl and hydroxyalkyl bridges showed an electrical conductivity one order of magnitude lower than those derived from more common complexes with C2 alkyl bridges. The observed difference was studied by means of cyclic voltammetry on interdigitated electrodes and operando spectroelectrochemistry, combined with density functional theory (DFT) calculations.

Continuous Flow Bioamination of Ketones in Organic Solvents at Controlled Water Activity using Immobilized ω-Transaminases.

Compared with biocatalysis in aqueous media, the use of enzymes in neat organic solvents enables increased solubility of hydrophobic substrates and can lead to more favorable thermodynamic equilibria, avoidance of possible hydrolytic side reactions and easier product recovery. ω-Transaminases from Arthrobacter sp. (AsR-ωTA) and Chromobacterium violaceum (Cv-ωTA) were immobilized on controlled porosity glass metal-ion affinity beads (EziG) and applied in neat organic solvents for the amination of 1-phenoxypropan-2-one with 2-propylamine. The reaction system was investigated in terms of type of carrier material, organic solvents and reaction temperature. Optimal conditions were found with more hydrophobic carrier materials and toluene as reaction solvent. The system's water activity (aw) was controlled via salt hydrate pairs during both the biocatalyst immobilization step and the progress of the reaction in different non-polar solvents. Notably, the two immobilized ωTAs displayed different optimal values of aw, namely 0.7 for EziG3-AsR-ωTA and 0.2 for EziG3-Cv-ωTA. In general, high catalytic activity was observed in various organic solvents even when a high substrate concentration (450-550 mM) and only one equivalent of 2-propylamine were applied. Under batch conditions, a chemical turnover (TTN) above 13000 was obtained over four subsequent reaction cycles with the same batch of EziG-immobilized ωTA. Finally, the applicability of the immobilized biocatalyst in neat organic solvents was further demonstrated in a continuous flow packed-bed reactor. The flow reactor showed excellent performance without observable loss of enzymatic catalytic activity over several days of operation. In general, ca. 70% conversion was obtained in 72 hours using a 1.82 mL flow reactor and toluene as flow solvent, thus affording a space-time yield of 1.99 g L-1 h-1. Conversion reached above 90% when the reaction was run up to 120 hours.

Establishment of Murine Hybridoma Cells Producing Antibodies against Spike Protein of SARS-CoV-2.

In 2020 the world faced the pandemic of COVID-19 severe acute respiratory syndrome caused by a new type of coronavirus named SARS-CoV-2. To stop the spread of the disease, it is crucial to create molecular tools allowing the investigation, diagnoses and treatment of COVID-19. One of such tools are monoclonal antibodies (mAbs). In this study we describe the development of hybridoma cells that can produce mouse mAbs against receptor binding domain of SARS-CoV-2 spike (S) protein. These mAbs are able to specifically detect native and denatured S proteins in all tested applications, including immunoblotting, enzyme-linked immunosorbent assay, immunofluorescence staining of cells and immunohistochemical staining of paraffin embedded patients' tissue samples. In addition, we showed that the obtained mAbs can efficiently block SARS-CoV-2 infection in in vitro experiments. Finally, we determined the amino acid sequence of light and heavy chains of the mAbs. This information will allow the use of corresponding peptides to establish genetically engineered therapeutic antibodies. To date multiple mAbs against SARS-CoV-2 proteins have been established, however, bigger sets of various antibodies will allow the detection and neutralization of SARS-CoV-2, even if the virus acquires novel mutations.

Catalyst-Free Arylation of Tertiary Phosphines with Diaryliodonium Salts Enabled by Visible Light.

The visible-light-induced arylation of tertiary phosphines with aryl(mesityl)iodonium triflates to produce the quaternary phosphonium salts occurs under mild, metal, and catalyst-free conditions. Photo-excited EDA complexes between diaryliodonium salts and phosphines supposedly enable this transformation, which is difficult to achieve through the traditional ground-state reactions. Demonstrating high functional group tolerance, broad scope, and complete selectivity of the aryl group transfer, the method is particularly compatible with sterically congested phosphines, which are challenging under metal-based catalytic methods.

Addition Polyalkylnorbornenes: A Promising New Class of Si-Free Membrane Materials for Hydrocarbons Separation.

Nanoporous glassy polymers are perspective materials for the fabrication of gas separation membranes, especially for the application of gaseous hydrocarbon separation. However, the drawback of such materials is the pronounced physical aging resulting in the dramatic drop of gas transport properties due to relaxation of high-free-volume fraction in time. Herein, a novel and readily available group of such glassy polymers is reported based on 5-alkylnorbornenes. These polymers are easily synthesized from dicyclopentadiene and α-olefins by Diels-Alder reaction and vinyl (addition) polymerization of the formed cycloadducts in the presence of ([(η3 -C3 H5 )PdCl]2 /PCy3 /Na+ [B(3,5-(CF3 )2 C6 H3 )4 ]- catalyst. The obtained polymers display low-fraction free volume, stable gas permeability over time, and possess a unique feature for the glassy polymers-solubility controlled permeation of hydrocarbons and enhanced C4 H10 /CH4 selectivity.

Chemoselective reduction of carboxamides.

The reduction of amides gives access to a wide variety of important compounds such as amines, imines, enamines, nitriles, aldehydes and alcohols. The chemoselective transformation into these functional groups is challenging due to the intrinsic stability of the amide bond; nevertheless, the ability to reduce highly stable carboxamides selectively in the presence of sensitive functional groups is of high synthetic value for academic and industrial chemists. Hydride-based reagents such as LiAlH4 or diboranes are today the most commonly used compounds for amide reductions, and apart from the substantial amount of waste generated using these methods, they lack tolerance to most other functional groups. This tutorial review provides an overview of the recent progress made in the development of chemoselective protocols for amide reduction and gives an insight to their advantages and drawbacks.

Chemoselective Reduction of Tertiary Amides under Thermal Control: Formation of either Aldehydes or Amines.

The chemoselective reduction of amides in the presence of other more reactive reducible functional groups is a highly challenging transformation, and successful examples thereof are most valuable in synthetic organic chemistry. Only a limited number of systems have demonstrated the chemoselective reduction of amides over ketones. Until now, the aldehyde functionality has not been shown to be compatible in any catalytic reduction protocol. Described herein is a [Mo(CO)6 ]-catalyzed protocol with an unprecedented chemoselectivity and allows for the reduction of amides in the presence of aldehydes and imines. Furthermore, the system proved to be tunable by variation of the temperature, which enabled for either C-O or C-N bond cleavage that ultimately led to the isolation of both amines and aldehydes, respectively, in high chemical yields.

Practical and Broadly Applicable Catalytic Enantioselective Additions of Allyl-B(pin) Compounds to Ketones and α-Ketoesters.

A set of broadly applicable methods for efficient catalytic additions of easy-to-handle allyl-B(pin) (pin=pinacolato) compounds to ketones and acyclic α-ketoesters was developed. Accordingly, a large array of tertiary alcohols can be obtained in 60 to >98 % yield and up to 99:1 enantiomeric ratio. At the heart of this development is rational alteration of the structures of the small-molecule aminophenol-based catalysts. Notably, with ketones, increasing the size of a catalyst moiety (tBu to SiPh3 ) results in much higher enantioselectivity. With α-ketoesters, on the other hand, not only does the opposite hold true, since Me substitution leads to substantially higher enantioselectivity, but the sense of the selectivity is reversed as well.