Photoinduced Charge Accumulation and Prolonged Multielectron Storage for the Separation of Light and Dark Reaction.

The utilization of solar energy is restricted by the intermittent nature of solar influx. We present novel noble-metal free complexes that can be photochemically charged in the presence of sacrificial electron donors and remain stable in its charged form for over 14 h. This allows the doubly reduced Cu(I) 4H-imidazolate complex to be stored after photochemical charging and used as a reagent in dark reactions, such as the reduction of methyl viologen or oxygen. Combined UV-vis/EPR spectroelectrochemistry indicates that a two-electron reduction is induced by introducing sacrificial electron donors that facilitate proton-coupled electron transfer. Repeated photochemical reduction and chemical oxidation reveals that the complex retained a charging capacity of 72% after four cycles. We demonstrate a chemical system that can decouple photochemical processes from the day-night cycle, which has been a barrier to realizing utilization of solar energy in photochemical processes on a global scale.

MnOx/IrOx as Selective Oxygen Evolution Electrocatalyst in Acidic Chloride Solution.

The oxygen evolution reaction (OER) and chlorine evolution reaction (CER) are electrochemical processes with high relevance to water splitting for (solar) energy conversion and industrial production of commodity chemicals, respectively. Carrying out the two reactions separately is challenging, since the catalytic intermediates are linked by scaling relations. Optimizing the efficiency of OER over CER in acidic media has proven especially difficult. In this regard, we have investigated the OER versus CER selectivity of manganese oxide (MnOx), a known OER catalyst. Thin films (∼5-20 nm) of MnOx were electrodeposited on glassy carbon-supported hydrous iridium oxide (IrOx/GC) in aqueous chloride solutions of pH ∼0.9. Using rotating ring-disk electrode voltammetry and online electrochemical mass spectrometry, it was found that deposition of MnOx onto IrO x decreases the CER selectivity of the system in the presence of 30 mM Cl- from 86% to less than 7%, making it a highly OER-selective catalyst. Detailed studies of the CER mechanism and ex-situ structure studies using SEM, TEM, and XPS suggest that the MnOx film is in fact not a catalytically active phase, but functions as a permeable overlayer that disfavors the transport of chloride ions.

Hydrogen-Generating Ru/Pt Bimetallic Photocatalysts Based on Phenyl-Phenanthroline Peripheral Ligands.

Recent studies on hydrogen-generating supramolecular bimetallic photocatalysts indicate a more important role of the peripheral ligands than expected, motivating us to design a Ru/Pt complex with 4,7-diphenyl-1,10-phenanthroline peripheral ligands. Photoinduced intra- and inter-ligand internal conversion processes have been investigated using transient absorption spectroscopy, spanning the femto- to nanosecond timescale. After photoexcitation and ultrafast intersystem crossing, triplet states localised on either the peripheral ligands or on the bridging ligand/catalytic unit are populated in a non-equilibrated way. Time-resolved photoluminescence demonstrates that the lifetime for the Ru/Pt dinuclear species (795±8 ns) is significantly less than that of the mononuclear analogue (1375±20 ns). The photocatalytic studies show modest hydrogen turnover numbers, which is possibly caused by the absence of an excited state equilibrium. Finally, we identify challenges that must be overcome to further develop this class of photocatalysts and propose directions for future research.

Enhancing Photocatalytic Hydrogen Generation: the Impact of the Peripheral Ligands in Ru/Pd and Ru/Pt Complexes.

The synthesis, photophysical properties and photocatalytic efficiency of a range of novel supramolecular assemblies of the type [Ru(dceb)2 (µ-bisbpy)MCl2 ][PF6 ]2 and [Ru(bpy)2 (µ-bisbpy)MCl2 ][PF6 ]2 (M=Pd or Pt, dceb=diethyl 2,2'-bipyridine-4,4'-dicarboxylate, bpy=2,2'-bipyridine and bisbpy=2,2':5',3'':6'',2'''-quaterpyridine) are reported. Photocatalytic hydrogen generation was dependent on the nature of the peripheral ligand, on the catalytic centre and on the amount of water present in the photocatalytic mixture. The best catalytic conditions were obtained with the dceb peripheral ligand (turnover numbers up to 513 after 18 h). The experimental data and DFT calculations on both the bpy- and dceb-based compounds indicated that the peripheral dceb ligands participated in the photocatalytic process.

The Critical Role Played by the Catalytic Moiety in the Early-Time Photodynamics of Hydrogen-Generating Bimetallic Photocatalysts.

The effect of the catalytic moiety on the early-time photodynamics of Ru/M (M=Pt or Pd) bimetallic photocatalysts is studied by ultrafast transient absorption spectroscopy. In comparison to the Ru/Pd photocatalyst described earlier, the Ru/Pt analogue shows complex excited-state dynamics with three distinct kinetic components ranging from sub-ps to 10(2)  ps, requiring a more sophisticated photophysical model than that developed earlier for the Ru/Pd complex. In the Pu/Pt photocatalyst, an additional lower-lying excited state is proposed to quench the hot higher-lying triplet metal-to-ligand charge-transfer states. Furthermore, a strong excitation wavelength dependence on the population of excited states is observed for both the Ru/Pt and Ru/Pd complexes, indicating a non-equilibrated distribution even on the 10(2)  ps timescale. These insights shed light on the significant impact of the catalytic moiety on the fundamental early-time photophysics of Ru-based photocatalysts.

Subtle Changes to Peripheral Ligands Enable High Turnover Numbers for Photocatalytic Hydrogen Generation with Supramolecular Photocatalysts.

The photocatalytic generation of hydrogen (H2) from protons by two cyclometalated ruthenium-platinum polypyridyl complexes, [Ru(bpy)2(2,5-bpp)PtIS](2+) (1) and [Ru(dceb)2(2,5-bpp)PtIS](2+) (2) [where bpy = 2,2'-bipyridine, 2,5-bpp = 2,2',5',2″-terpyridine, dceb = 4,4'-di(carboxyethyl)bipyridine, and S = solvent], is reported. Turnover numbers (TONs) for H2 generation were increased by nearly an order of magnitude by the introduction of carboxyethyl ester units, i.e., from 80 for 1P to 650 for 2P after 6 h of irradiation, with an early turnover frequency (TOF) increasing from 15 to 200 h(-1). The TON and TOF values for 2P are among the highest reported to date for supramolecular photocatalysts. The increase correlates with stabilization of the excited states localized on the peripheral ligands of the light-harvesting Ru(II) center.

Supramolecular bimetallic assemblies for photocatalytic hydrogen generation from water.

A series of supramolecular assemblies of the type [Ru(L-L)2(L'-L)MX2)](n+) are reported where L-L is 2,2'-bipyridine (bipy), 4,4'-di-tetra-butyl-bipyridine (tbbipy) or 4,4'-diethoxycarbonyl-2,2'-bipyridine (dceb), L-L' is tetrapyrido[3,2-a:2',3'-c:3'',2''-h:2''',3'''-j]phenazine (tpphz), 2,2':5',2''-terpyridine (2,5-bpp), 2,2':6',2''-terpyridine, (2,6-bpp), 2,5-di(pyridine-2-yl)pyrazine (2,5-dpp) or 2,3-di(pyridine-2-yl)pyrazine (2,3-dpp), and MX2 is PdCl2, PtCl2 or PtI2. The photocatalytic behaviour with respect to hydrogen generation of these compounds and their ultrafast photophysical properties are discussed as a function of the nature of the peripheral ligands, the bridging ligands and the catalytic centre. The results obtained show how differences in the chemical composition of the photocatalysts can affect intramolecular photoinduced electron transfer processes and the overall photocatalytic efficiency.

Hole injection dynamics from two structurally related Ru-bipyridine complexes into NiO(x) is determined by the substitution pattern of the ligands.

The dyes bis[2,2'-bipyridine][4,4'-dicarboxy-2,2'-bipyridine]ruthenium(II) dihexafluorophosphate, [Ru(bpy)2dcb](PF6)2 (Ru1), and tris[4,4'-bis(ethylcarboxy)-2,2'-bipyridine]ruthenium(II) dihexafluorophosphate, [Ru(dceb)3](PF6)2 (Ru2), attached to NiOx nanoparticle films were investigated using transient absorption and luminescence spectroscopy. In acetonitrile solution the dyes reveal very similar physical and chemical properties, i.e. both dyes exhibit comparable ground state and long-lived, broad excited state absorption. However, when immobilized onto a NiOx surface the photophysical properties of the two dyes differ significantly. For Ru1 luminescence is observed, which decays within 18 ns and ultrafast transient absorption measurements do not show qualitative differences from the photophysics of Ru1 in solution. In contrast to this the luminescence of photoexcited Ru2 on NiOx is efficiently quenched and the ultrafast transient absorption spectra reveal the formation of oxidized nickel centres overlaid by the absorption of the reduced dye Ru2 with a characteristic time-constant of 18 ps. These findings are attributed to the different localization of the initially photoexcited state in Ru1 and Ru2. Due to the inductive effect (−I) of the carboxylic groups, the lowest energy excited state in Ru1 is localized on the dicarboxy-bipyridine ligand, which is bound to the NiOx surface. In Ru2, on the other hand, the initially populated excited state is localized on the ester-substituted ligands, which are not bound to the semiconductor surface. Hence, the excess charge density that is abstracted from the Ru-ion in the metal-to-ligand charge-transfer transition is shifted away from the NiOx surface, which ultimately facilitates hole transfer into the semiconductor.

Optimization of hydrogen-evolving photochemical molecular devices.

A molecular photocatalyst consisting of a Ru(II) photocenter, a tetrapyridophenazine bridging ligand, and a PtX2 (X=Cl or I) moiety as the catalytic center functions as a stable system for light-driven hydrogen production. The catalytic activity of this photochemical molecular device (PMD) is significantly enhanced by exchanging the terminal chlorides at the Pt center for iodide ligands. Ultrafast transient absorption spectroscopy shows that the intramolecular photophysics are not affected by this change. Additionally, the general catalytic behavior, that is, instant hydrogen formation, a constant turnover frequency, and stability are maintained. Unlike as observed for the Pd analogue, the presence of excess halide does not affect the hydrogen generation capacity of the PMD. The highly improved catalytic efficiency is explained by an increased electron density at the Pt catalytic center, this is confirmed by DFT studies.

A photo- and electrochemical investigation of BODIPY-cobaloxime complexes for hydrogen production, coupled with quantum chemical calculations.

Two BODIPY-cobaloxime complexes; [{Co(dmgH)2Cl}{3-[bis-(4-ethyl-3,5-dimethyl-1H-pyrrol-2-yl)-methyl]-pyridine-borondiflouride}] (1a) and [{Co(dmgH)2Cl}{4-[bis-(4-ethyl-3,5-dimethyl-1H-pyrrol-2-yl)-methyl]-pyridine-borondiflouride}] (2a) (BODIPY = boron dipyrromethene), (dmgH = dimethylglyoxime) have been synthesised and studied as model catalytic systems for the generation of hydrogen gas in aqueous media. Under photochemical conditions, neither complex catalysed the reduction of water to hydrogen. However, both complexes showed considerable activity under electrochemical conditions. Turn-over-numbers for hydrogen production of 1.65 × 10(4) and 1.08 × 10(4) were obtained for 1a and 2a respectively following potentiostatic electrolysis at -1.2 V vs. Ag/AgCl after 1 hour. Quantum chemical calculations were performed to provide an explanation for the lack of photochemical activity.

Dye sensitised solar cells with nickel oxide photocathodes prepared via scalable microwave sintering.

Photoactive NiO electrodes for cathodic dye-sensitised solar cells (p-DSCs) have been prepared with thicknesses ranging between 0.4 and 3.0 µm by spray-depositing pre-formed NiO nanoparticles on fluorine-doped tin oxide (FTO) coated glass substrates. The larger thicknesses were obtained in sequential sintering steps using a conventional furnace (CS) and a newly developed rapid discharge sintering (RDS) method. The latter procedure is employed for the first time for the preparation of p-DSCs. In particular, RDS represents a scalable procedure that is based on microwave-assisted plasma formation that allows the production in series of mesoporous NiO electrodes with large surface areas for p-type cell photocathodes. RDS possesses the unique feature of transmitting heat from the bulk of the system towards its outer interfaces with controlled confinement of the heating zone. The use of RDS results in a drastic reduction of processing times with respect to other deposition methods that involve heating/calcination steps with associated reduced costs in terms of energy. P1-dye sensitized NiO electrodes obtained via the RDS procedure have been tested in DSC devices and their performances have been analysed and compared with those of cathodic DSCs derived from CS-deposited samples. The largest conversion efficiencies (0.12%) and incident photon-to-current conversion efficiencies, IPCEs (50%), were obtained with sintered NiO electrodes having thicknesses of ~1.5-2.0 µm. In all the devices, the photogenerated holes in NiO live significantly longer (τ(h) ~ 1 s) than have previously been reported for P1-sensitized NiO photocathodes. In addition, P1-sensitised sintered electrodes give rise to relatively high photovoltages (up to 135 mV) when the triiodide-iodide redox couple is used.

Effect of water during the quantitation of formate in photocatalytic studies on CO2 reduction in dimethylformamide.

The effect of the water concentration on the quantitation of formate from dimethylformamide in the presence of electron-donating bases using ion chromatography is reported. This observation has important implications in the area of the photocatalytic reduction of CO(2), where formate levels are often used to calculate catalyst turnover numbers.

Resonance-Raman microspectroscopy for quality assurance of dye-sensitized NiO(x) films with respect to dye desorption kinetics in water.

Resonance Raman microspectroscopy is used to investigate dye-sensitized NiO(x) nanoparticle films to be used as photocathodes in tandem dye-sensitized solar cells. It is shown that rR microspectroscopy has potential for applications in quality assurance in such systems and also in integrated dye-sensitized solar cell modules. Here, ruthenium dye-sensitized NiO(x) nanoparticle layers were produced both as single and double NiO(x) films using a one or two-step deposition process, respectively. The distribution of the sensitizer on the surfaces was investigated by rR microspectroscopy. The chemical images obtained from rR microspectroscopy yield complementary information to bright field microscope pictures and provide detailed insight into the sensitization pattern e.g. in the vicinity of surface vacancies and other inhomogeneities. Furthermore, based on the mapping results the dye desorption kinetics upon addition of water has been analysed. Desorption on the single NiO(x) film is faster and more efficient than on the double film. These changes are attributed to binding sites on the NiO(x) surface that are passivated with regard to water penetration. This passivation is introduced by the second synthesis step in building the second film of NiO(x) on the glass substrate. Both findings highlight the potential of rR microspectroscopy for quality assurance of dye-sensitized solar cell electrodes.

Probing the Effects of Electrode Composition and Morphology on the Effectiveness of Silicon Oxide Overlayers to Enhance Selective Oxygen Evolution in the Presence of Chloride Ions.

Seawater electrolysis offers significant logistical advantages over freshwater electrolysis but suffers from a fundamental selectivity problem at the anode. To prevent the evolution of toxic chlorine alongside the evolution of oxygen, a promising approach is the use of electrochemically inert overlayers. Such thin films can exert a perm-selective effect, allowing the transport of water and oxygen between the bulk electrolyte and the electrocatalytic buried interface while suppressing the transport of chloride ions. In this work, we investigate thin (5-20 nm) overlayer films composed of amorphous silicon oxide (SiO x ) and their application to suppressing the chlorine evolution reaction (CER) in favor of the oxygen evolution reaction (OER) during acidic saltwater electrolysis on three different types of electrodes. While SiO x overlayers are seen to be an effective barrier against the CER on well-defined, smooth Pt thin films, decreasing the CER activity roughly 20-fold, this ability has not been previously explored on Ir-based catalysts with a higher surface area relevant to industrial applications. On amorphous iridium oxide electrodes, the selectivity toward the CER versus the OER was marginally reduced from ∼98 to ∼94%, which was attributed to the higher abundance of defects in overlayers deposited on the rougher electrode. On the other hand, Ir-based anodes consisting of thick mixed metal oxide films supported on Ti showed a significant decrease in CER selectivity, from ∼100 to ∼50%, although this came at the cost of reduced activity toward the OER. These results show that the morphology and composition of the underlying electrode play important roles in the effectiveness of the selective overlayers and provide guidance for further development of high-surface-area OER-selective anodes.

Active repair of a dinuclear photocatalyst for visible-light-driven hydrogen production.

The molecular apparatus behind biological photosynthesis retains its long-term functionality through enzymatic repair. However, bioinspired molecular devices designed for artificial photosynthesis, consisting of a photocentre, a bridging ligand and a catalytic centre, can become unstable and break down when their individual modules are structurally compromised, halting their overall functionality and operation. Here we report the active repair of such an artificial photosynthetic molecular device, leading to complete recovery of catalytic activity. We have identified the hydrogenation of the bridging ligand, which inhibits the light-driven electron transfer between the photocentre and catalytic centre, as the deactivation mechanism. As a means of repair, we used the light-driven generation of singlet oxygen, catalysed by the photocentre, to enable the oxidative dehydrogenation of the bridging unit, which leads to the restoration of photocatalytic hydrogen formation.

Application of circular dichroism spectroscopy in the study of mixed-valence asymmetric ruthenium polypyridyl complexes.

Circular dichroism (CD) spectroelectrochemistry is used to determine the extent of singly occupied molecular orbital delocalization in mixed-valence multinuclear complexes, specifically the mixed-valence Ru(II)Ru(III) states of the four diastereoisomers of [(Ru(bpy)(2))(2)(bpt)](3+) [1; bpy = 2,2'-bipyridyl and bpt = 3,5-bis(pyrid-2'-yl)-1,2,4-triazolato anion]. The complex was found to be stable to thermal racemization in the three oxidation states, but photoracemization in the Ru(II)Ru(II) state was observed.

Photoinduced ligand isomerisation in a pyrazine-containing ruthenium polypyridyl complex.

Photochemically-induced ligand rearrangements for the N2 and N4 coordination isomers of the complex [Ru(bpy)(2)(Hpztr)](2+) and its deprotonated analogue [Ru(bpy)(2)(pztr)](+), where bpy is 2,2'-bipyridyl and Hpztr is pyrazine-1,2,4-triazole ligand, are reported. (1)H NMR spectroscopic and HPLC studies indicate that in acetone and acetonitrile the complexes are photostable when the triazole ring is deprotonated. Irradiation of the protonated N2 isomer in acetone results in formation of the N4 isomer, with the N4 isomer being photostable. In acetonitrile both isomers show photolability of the triazole-based ligand and full dissociation to form [Ru(bpy)(2)(CH(3)CN)(2)](2+) is observed. The activation parameters for the population of the (3)MC state from the lowest (3)MLCT manifold, as obtained from temperature-dependent emission lifetime studies, are reported and their relevance to the observed photochemical behaviour is considered. The results obtained are discussed in relation the analogous pyridine-triazole complexes.

Synthesis and properties of dinuclear Ru(II)/Os(II) complexes based on a heteroditopic phenanthroline-terpyridine bridging ligand.

The synthesis and characterization of a series of mono- and dinuclear ruthenium(II) and osmium(II) polypyridyl complexes based on the heteroditopic bridging ligand PT are reported. This ligand incorporates bidentate phen (1,10-phenanthroline) and terdentate tpy (2,2':6',2''-terpyridine) units directly connected by their 3 and 5 positions, respectively. The dinuclear complexes have been synthesized via a Pd(0) catalyzed cross-coupling reaction between a bromo-substituted Ru-phen complex and a tpy derivative incorporating a boronate ester, followed by Ru(II) or Os(II) complexation. The compounds obtained are fully characterized using spectroscopic and electrochemical measurements. The electrochemical studies do not yield any evidence for interaction between the two metal centers in the dinuclear compounds. Emission studies indicate, however, energy transfer from the phen moiety to the tpy center. For the ruthenium/osmium species, this process is relatively slow, resulting in a dual emission. The emission of the mononuclear ruthenium compound is enhanced by the addition of Zn(II).

Excited state localization and internuclear interactions in asymmetric ruthenium(II) and osmium(II) bpy/tpy based dinuclear compounds.

The synthesis of two asymmetric dinuclear complexes with the formula [M(bpy)(2)(bpt)Ru(tpy)Cl](2+), where M = Ru (1a), Os(2a); bpy = 2,2'-bipyridyl; Hbpt = 3,5-bis(pyridin-2-yl)1,2,4-triazole and tpy = 2,2',6',2''-terpyridine, is reported. The compounds obtained are characterized by mass spectrometry, (1)H NMR, UV/vis/NIR absorption, luminescence, and resonance Raman spectroscopy. Deuterium isotope labeling facilitates assignment of the (1)H NMR and resonance Raman spectra. The interaction between the two metal centers, mediated by the bridging 1,2,4-triazolato moiety in the mixed valent state, is assigned as type II based on the observation of metal to metal charge transfer absorption bands at 7090 and 5990 cm(-1) for 1a and 2a, respectively. The extent of localization of the emissive excited state was determined by transient resonance Raman and emission spectroscopy. Both 1a and 2a show phosphorescence at the same wavelengths; however, whereas for compound 1a the emission is based on the Ru(tpy)Cl- center, for 2a the emissive state is localized on the Os(bpy)(2)- unit. This indicates that also in the excited state there is efficient interaction between the two metal centers.

Models for the active site in [FeFe] hydrogenase with iron-bound ligands derived from bis-, tris-, and tetrakis(mercaptomethyl)silanes.

A series of multifunctional (mercaptomethyl)silanes of the general formula type R(n)Si(CH(2)SH)(4-n) (n = 0-2; R = organyl) was synthesized, starting from the corresponding (chloromethyl)silanes. They were used as multidentate ligands for the conversion of dodecacarbonyltriiron, Fe(3)(CO)(12), into iron carbonyl complexes in which the deprotonated (mercaptomethyl)silanes act as µ-bridging ligands. These complexes can be regarded as models for the [FeFe] hydrogenase. They were characterized by elemental analyses (C, H, S), NMR spectroscopic studies ((1)H, (13)C, (29)Si), and single-crystal X-ray diffraction. Their electrochemical properties were investigated by cyclic voltammetry to disclose a new mechanism for the formation of dihydrogen catalyzed by these compounds, whereby one sulfur atom was protonated in the catalytic cycle. The reaction of the tridentate ligand MeSi(CH(2)SH)(3) with Fe(3)(CO)(12) yielded a tetranuclear cluster compound. A detailed investigation by X-ray diffraction, electrochemical, Raman, Mössbauer, and susceptibility techniques indicates that for this compound initially [Fe(2){µ-MeSi(CH(2)S)(2)CH(2)SH}(CO)(6)] is formed. This dinuclear complex, however, is slowly transformed into the tetranuclear species [Fe(4){µ-MeSi(CH(2)S)(3)}(2)(CO)(8)].