Enzymatic synthesis of kraft lignin-acrylate copolymers using an alkaline tolerant laccase.

Softwood kraft lignin is a major bioresource relevant to the production of sustainable bio-based products. Continued challenges to lignin valorization, however, include poor solubility in organic solvents and in aqueous solutions at neutral pH. Herein, an alkaline tolerant laccase was used to graft acrylate functionalities onto softwood kraft lignin, which is expected to enhance the reactivity of lignin with isocyanate when producing bio-based polyurethanes. Proton nuclear magnetic resonance, Fourier-transform infrared spectroscopy, and high-performance liquid chromatography were used to confirm successful grafting of the acrylate monomer onto lignin and verify the importance of including tert-butyl hydroperoxide as an initiator in the grafting reaction. Laccase-mediated grafting of softwood kraft lignin under alkaline conditions produced lignin products with approximately 30% higher hydroxyl value and higher reactivity toward isocyanate. The reported enzymatic and aqueous process presents an opportunity for the sustainable valorization of softwood kraft lignin. KEY POINTS: • Softwood kraft lignin displayed high phenolic hydroxyl content, polydispersity index and average molecular weight • Grafting hydroxyethyl acrylate (HEA) monomer onto kraft lignin by laccase was successful at 60 °C and alkaline conditions • Lignin-HEA grafted copolymer showed an increase in total OH value and an increase in average molecular weight.

Kraft Lignin: A Valuable, Sustainable Resource, Opportunities and Challenges.

Kraft lignin, a by-product from the production of pulp, is currently incinerated in the recovery boiler during the chemical recovery cycle, generating valuable bioenergy and recycling inorganic chemicals to the pulping process operation. Removing lignin from the black liquor or its gasification lowers the recovery boiler load enabling increased pulp production. During the past ten years, lignin separation technologies have emerged and the interest of the research community to valorize this underutilized resource has been invigorated. The aim of this Review is to give (1) a dedicated overview of the kraft process with a focus on the lignin, (2) an overview of applications that are being developed, and (3) a techno-economic and life cycle asseeements of value chains from black liquor to different products. Overall, it is anticipated that this effort will inspire further work for developing and using kraft lignin as a commodity raw material for new applications undeniably promoting pivotal global sustainability concerns.

Debottlenecking a Pulp Mill by Producing Biofuels from Black Liquor in Three Steps.

By extracting lignin, pulp production can be increased without heavy investments in a new recovery boiler, the typical bottleneck of a pulp mill. The extraction is performed by using 0.20 and 0.15 weight equivalents of CO2 and H2 SO4 respectively. Herein, we describe lignin esterification with fatty acids using benign reagents to generate a lignin ester mixable with gas oils. The esterification is accomplished by activating the fatty acid and lignin with acetic anhydride which can be regenerated from the acetic acid recycled in this reaction. The resulting mass balance ratio is fatty acid/lignin/acetic acid (2 : 1 : 0.1). This lignin ester can be hydroprocessed to generate hydrocarbons in gasoline, aviation, and diesel range. A 300-hour continuous production of fuel was accomplished. By recirculating reagents from both the esterification step and applying a water gas shift reaction on off-gases from the hydroprocessing, a favorable overall mass balance is realized.