Direct Synthesis of N-formamides by Integrating Reductive Amination of Ketones and Aldehydes with CO2 Fixation in a Metal-Organic Framework.

Formamides are important feedstocks for the manufacture of many fine chemicals. State-of-the-art synthesis of formamides relies on the use of an excess amount of reagents, giving copious waste and thus poor atom-economy. Here, we report the first example of direct synthesis of N-formamides by coupling two challenging reactions, namely reductive amination of carbonyl compounds, particularly biomass-derived aldehydes and ketones, and fixation of CO2 in the presence of H2 over a metal-organic framework supported ruthenium catalyst, Ru/MFM-300(Cr). Highly selective production of N-formamides has been observed for a wide range of carbonyl compounds. Synchrotron X-ray powder diffraction reveals the presence of strong host-guest binding interactions via hydrogen bonding and parallel-displaced π⋅⋅⋅π interactions between the catalyst and adsorbed substrates facilitating the activation of substrates and promoting selectivity to formamides. The use of multifunctional porous catalysts to integrate CO2 utilisation in the synthesis of formamide products will have a significant impact in the sustainable synthesis of feedstock chemicals.

Sub-Picosecond Carrier Dynamics Explored using Automated High-Throughput Studies of Doping Inhomogeneity within a Bayesian Framework.

Bottom-up production of semiconductor nanomaterials is often accompanied by inhomogeneity resulting in a spread in electronic properties which may be influenced by the nanoparticle geometry, crystal quality, stoichiometry, or doping. Using photoluminescence spectroscopy of a population of more than 11 000 individual zinc-doped gallium arsenide nanowires, inhomogeneity is revealed in, and correlation between doping and nanowire diameter by use of a Bayesian statistical approach. Recombination of hot-carriers is shown to be responsible for the photoluminescence lineshape; by exploiting lifetime variation across the population, hot-carrier dynamics is revealed at the sub-picosecond timescale showing interband electronic dynamics. High-throughput spectroscopy together with a Bayesian approach are shown to provide unique insight in an inhomogeneous nanomaterial population, and can reveal electronic dynamics otherwise requiring complex pump-probe experiments in highly non-equilibrium conditions.

Dielectric-free electrowetting on graphene.

Electrowetting is a simple way to induce the spreading and retraction of electrolyte droplets. This method is widely used in "device" applications, where a dielectric layer is applied between the electrolyte and the conducting substrate. Recent work, including contributions from our own laboratory, have shown that reversible electrowetting can be achieved directly on conductors. We have shown that graphite surfaces, in particular when combined with highly concentrated electrolyte solutions, show a strong wetting effect. The process is driven by the interactions between the electrolyte ions and the surface, hence models of double-layer capacitance are able to explain changes in the equilibrium contact angles. Herein, we extend the approach to the investigation of electrowetting on graphene samples of varying thickness, prepared by chemical vapor deposition. We show that the use of highly concentrated aqueous electrolytes induces a clear yet subtle electrowetting response due to the adsorption of ions and the suppression of the negative effect introduced by the surface impurities accumulating during the transfer process. The latter have been previously reported to fully hinder electrowetting at lower electrolyte concentrations. An amplified wetting response is recorded in the presence of strongly adsorbed/intercalated anions in both aqueous and non-aqueous electrolytes. The phenomenon is interpreted based on the anion-graphene interactions and their influence on the energetics of the interface. By monitoring the dynamics of wetting, an irreversible behaviour is identified in all cases as a consequence of the irreversibility of anion adsorption and/or intercalation. Finally, the effect of the underlying reactions on the timescales of wetting is also examined.

Oxide-mediated nitrogen doping of CVD graphene and their subsequent thermal stability.

Heteroatom doping of graphene is a promising approach for tailoring its chemical and electronic properties-a prerequisite for many applications such as sensing, catalysis, and energy storage. Doping chemical vapour deposition (CVD) graphene with nitrogen during growth (in situdoping) is a common strategy, but it produces a distribution of inequivalent dopant sites and requires substantial modifications to the CVD growth process. In this study, we demonstrate a novel and simple oxide-mediated approach to introduce nitrogen dopants into pre-existing CVD graphene (ex situdoping) which achieves comparable doping densities toin situdoping methodologies. Furthermore, we demonstrate that thermal annealing of N-doped graphene can selectively remove pyridinic, retaining graphitic and pyrrolic nitrogen dopants, offering an attractive route to further modify graphene functionality. The methodologies we present are simple and scalable to precisely tailor graphene properties without the need to alter CVD growth protocols.

Corrosion inhibition in acidic environments: key interfacial insights with photoelectron spectroscopy.

In many engineering scenarios, surface-active organic species are added to acidic solutions to inhibit the corrosion of metallic components. Given suitable selection, such corrosion inhibitors are highly effective, preventing significant degradation even in highly aggressive environments. Nevertheless, there are still considerable gaps in fundamental knowledge of corrosion inhibitor functionality, severely restricting rational development. Here, we demonstrate the capability of X-ray photoelectron spectroscopy (XPS), supported by ab initio modelling, for revealing key details of inhibited substrates. Attention is focussed on the corrosion inhibition of carbon steel through the addition of an exemplar imidazoline-based corrosion inhibitor (OMID) to aqueous solutions of both HCl and H2SO4. Most notably, it is demonstrated that interfacial chemistry varies with the identity of the acid. High resolution Fe 2p, O 1s, N 1s, and Cl 2p XPS spectra, acquired from well-inhibited carbon steel in 1 M HCl, show that there are two different singly protonated OMID species bound directly to the metallic carbon steel substrate. In sharp contrast, in 0.01 M H2SO4, OMID adsorbs onto an ultra-thin surface film, composed primarily of a ferric sulfate (Fe2(SO4)3)-like phase. Such insight is essential to efforts to develop a mechanistic description of corrosion inhibitor functionality, as well as knowledge-based identification of next generation corrosion inhibitors.

Universal shape of graphene nanobubbles on metallic substrate.

Graphene nanobubbles (GNBs) are formed from matter trapped between a two-dimensional material and a substrate. Such structures exhibit a wide range of new fundamental phenomena and are promising for nanoelectronic applications. However, a central part of the synthesis methods leads to the formation of GNBs with undetermined matter composition. Moreover, none of the GNBs' synthesis methods allow one to control the type of trapped matter. In a recent paper [K. M. Zahra, PCCP, 22,7606 (2020)], the authors proposed a new approach that allows the production of GNBs on a copper substrate with pure nitrogen inside in a controlled manner. In this work, we continue this research by studying the geometry of the GNBs in detail and indirectly measuring the internal pressure, which depends on the van der Waals adhesion energy and elastic properties of the graphene membrane. In agreement with other studies, we observe that dome-shaped bubbles exhibit universal scaling law, i.e., constant height to radius ratio. However, the measured height to radius ratio differs significantly from the known results of experiments and computer simulations. This deviation is explained by applying the membrane theory and taking into account the high adhesion of the copper substrate and graphene sheet. The adhesion energy calculated based on experimental data is close to the measurements performed by other experimental techniques.

Oleylamine Aging of PtNi Nanoparticles Giving Enhanced Functionality for the Oxygen Reduction Reaction.

We report a rapid solution-phase strategy to synthesize alloyed PtNi nanoparticles which demonstrate outstanding functionality for the oxygen reduction reaction (ORR). This one-pot coreduction colloidal synthesis results in a monodisperse population of single-crystal nanoparticles of rhombic dodecahedral morphology with Pt-enriched edges and compositions close to Pt1Ni2. We use nanoscale 3D compositional analysis to reveal for the first time that oleylamine (OAm)-aging of the rhombic dodecahedral Pt1Ni2 particles results in Ni leaching from surface facets, producing aged particles with concave faceting, an exceptionally high surface area, and a composition of Pt2Ni1. We show that the modified atomic nanostructures catalytically outperform the original PtNi rhombic dodecahedral particles by more than two-fold and also yield improved cycling durability. Their functionality for the ORR far exceeds commercially available Pt/C nanoparticle electrocatalysts, both in terms of mass-specific activities (up to a 25-fold increase) and intrinsic area-specific activities (up to a 27-fold increase).

Formation of a U(VI)-Persulfide Complex during Environmentally Relevant Sulfidation of Iron (Oxyhydr)oxides.

Uranium is a risk-driving radionuclide in both radioactive waste disposal and contaminated land scenarios. In these environments, a range of biogeochemical processes can occur, including sulfate reduction, which can induce sulfidation of iron (oxyhydr)oxide mineral phases. During sulfidation, labile U(VI) is known to reduce to relatively immobile U(IV); however, the detailed mechanisms of the changes in U speciation during these biogeochemical reactions are poorly constrained. Here, we performed highly controlled sulfidation experiments at pH 7 and pH 9.5 on U(VI) adsorbed to ferrihydrite and investigated the system using geochemical analyses, X-ray absorption spectroscopy (XAS), and computational modeling. Analysis of the XAS data indicated the formation of a novel, transient U(VI)-persulfide complex as an intermediate species during the sulfidation reaction, concomitant with the transient release of uranium to the solution. Extended X-ray absorption fine structure (EXAFS) modeling showed that a persulfide ligand was coordinated in the equatorial plane of the uranyl moiety, and formation of this species was supported by computational modeling. The final speciation of U was nanoparticulate U(IV) uraninite, and this phase was evident at 2 days at pH 7 and 1 year at pH 9.5. Our identification of a new, labile U(VI)-persulfide species under environmentally relevant conditions may have implications for U mobility in sulfidic environments pertinent to radioactive waste disposal and contaminated land scenarios.

Intercalation, decomposition, entrapment - a new route to graphene nanobubbles.

Graphene nanobubbles (GNBs) have become the subject of recent research due to their novel physical properties. However, present methods to create them involve either extreme conditions or complex sample fabrication. We present a novel approach which relies on the intercalation of small molecules (NH3), their surface-mediated decomposition and the formation of larger molecules (N2) which are then entrapped beneath the graphene in bubbles. Our hypothesised reaction mechanism requires the copper substrate, on which our graphene is grown via chemical vapour deposition (CVD), to be oxidised before the reaction can occur. This was confirmed through X-ray photoelectron spectroscopy (XPS) data of both oxidised and reduced Cu substrate samples. The GNBs have been analysed through atomic force microscopy (AFM, after NH3 treatment) and XPS, which reveals the formation of five distinct N 1s peaks, attributed to N2 entrapment, N doping species and atomic nitrogen bonded with the Cu within the substrate. This method is simple, occurs at low temperatures (520 K) and integrates very easily with conventional CVD graphene growth, so presents an opportunity to open up this field of research further.

Optical Study of p-Doping in GaAs Nanowires for Low-Threshold and High-Yield Lasing.

Semiconductor nanowires suffer from significant non-radiative surface recombination; however, heavy p-type doping has proven to be a viable option to increase the radiative recombination rate and, hence, quantum efficiency of emission, allowing the demonstration of room-temperature lasing. Using a large-scale optical technique, we have studied Zn-doped GaAs nanowires to understand and quantify the effect of doping on growth and lasing properties. We measure the non-radiative recombination rate ( knr) to be (0.14 ± 0.04) ps-1 by modeling the internal quantum efficiency (IQE) as a function of doping level. By applying a correlative method, we identify doping and nanowire length as key controllable parameters determining lasing behavior, with reliable room-temperature lasing occurring for p ≳ 3 × 1018 cm-3 and lengths of ≳4 µm. We report a best-in-class core-only near-infrared nanowire lasing threshold of ∼10 µJ cm-2, and using a data-led filtering step, we present a method to simply identify subsets of nanowires with over 90% lasing yield.

Adsorption site, orientation and alignment of NO adsorbed on Au(100) using 3D-velocity map imaging, X-ray photoelectron spectroscopy and density functional theory.

Nitric oxide adsorption on a Au(100) single crystal has been investigated to identify the type of adsorption, the adsorption site, and the orientation and alignment of the adsorbed NO relative to the surface. This was done using a combination of 3D-surface velocity map imaging, near-ambient pressure X-ray photoelectron spectroscopy, and density functional theory. NO was observed to be molecularly adsorbed on gold at ∼200 K. Very narrow angular distributions and cold rotational distributions of photodesorbed NO indicate that NO adsorbs on high-symmetry sites on the Au crystal, with the N-O bond axis close to the surface normal. Our density functional theory calculations show that NO preferentially adsorbs on the symmetric bridge (2f) site, which ensures efficient overlap of the NO π* orbital with the orbitals on the two neighbouring Au atoms, and with the N-O bond axis aligned along the surface normal, in agreement with our conclusions from the rotational state distributions. The combination of XPS, which reveals the orientation of NO on gold, with 3D-surface velocity map imaging and density functional theory thus allowed us to determine the adsorption site, orientation and alignment of nitric oxide adsorbed on Au(100).

Gold-supported two-dimensional cobalt oxyhydroxide (CoOOH) and multilayer cobalt oxide islands.

In the present study, we investigate the facile conversion of Co-O bilayer islands on a Au(111) surface into preferentially O-Co-O trilayers in an oxygen atmosphere and O-Co-O-Co-O multilayers at elevated temperature. We characterize and compare the island morphologies with scanning tunneling microscopy, X-ray photoemission spectroscopy (XPS) and valence band spectroscopy, and show that the cobalt oxidation state changes from Co2+ in bilayers to purely Co3+ in trilayers and a mixture of Co2+ and Co3+ in the multilayer morphology. In contrast to bilayers and multilayers, the trilayer structure appears to grow pseudomorphic with the Au(111) substrate, and in addition we reveal the presence of a hydroxyl overlayer on this island type as evidenced by the appearance of a superstructure in STM correlated with the fingerprints of OH species in XPS and valence band spectroscopy. The obtained layered morphology consisting of hydroxylated trilayer islands is identical to an exfoliated sheet of the ß-CoOOH which is proposed to be the active phase of the cobalt oxide oxygen evolution reaction catalyst present in the electrochemical environment, and we note that this synthesized structure thus could serve as a valuable model catalyst.

Investigation of the Differential Capacitance of Highly Ordered Pyrolytic Graphite as a Model Material of Graphene.

A study of the differences among the capacitances of freshly exfoliated highly ordered pyrolytic graphite (HOPG, sample denoted FEG), HOPG aged in air (denoted AAG), and HOPG aged in an inert atmosphere (hereafter IAG) is presented in this work. The FEG is found to be more hydrophilic than AAG and IAG because the aqueous electrolyte contact angle (CA) increases from 61.7° to 72.5° and 81.8° after aging in Ar and air, respectively. Electrochemical impedance spectroscopy shows the FEG has an intrinsic capacitance (6.0 µF cm-2 at the potential of minimum capacitance) higher than those of AAG (4.3 µF cm-2) and IAG (4.7 µF cm-2). The observed changes in the electrochemical response are correlated with spectroscopic characterization (Raman spectroscopy and X-ray photoelectron spectroscopy), which show that the surface of HOPG was doped or contaminated after exposure to air. Taken together, these changes upon atmospheric exposure are attributed to oxygen molecule, moisture, and airborne organic contaminations: high-vacuum annealing was applied for the removal of the adsorbed contaminants. It was found that annealing the aged sample at 500 °C leads to partial removal of the contaminants, as gauged by the recovery of the measured capacitance. To the best of our knowledge, this is first study of the effect of the airborne contaminants on the capacitance of carbon-based materials.

Controlling the Electrical Transport Properties of Nanocontacts to Nanowires.

The ability to control the properties of electrical contacts to nanostructures is essential to realize operational nanodevices. Here, we show that the electrical behavior of the nanocontacts between free-standing ZnO nanowires and the catalytic Au particle used for their growth can switch from Schottky to Ohmic depending on the size of the Au particles in relation to the cross-sectional width of the ZnO nanowires. We observe a distinct Schottky to Ohmic transition in transport behavior at an Au to nanowire diameter ratio of 0.6. The current-voltage electrical measurements performed with a multiprobe instrument are explained using 3-D self-consistent electrostatic and transport simulations revealing that tunneling at the contact edge is the dominant carrier transport mechanism for these nanoscale contacts. The results are applicable to other nanowire materials such as Si, GaAs, and InAs when the effects of surface charge and contact size are considered.

ZnO nanowires with Au contacts characterised in the as-grown real device configuration using a local multi-probe method.

We demonstrate here a method using a multi-probe UHV instrument to isolate and measure individual metal contacts controllably fabricated on the tips of free standing ZnO nanowires (NWs). The measurements show Au can form reliable Ohmic and rectifying contacts by exercising control over the surface properties. In the as-grown state the Au contacts display low-resistance characteristics which are determined by the adsorbed species and defects on the NW surface. Subjecting the NWs to an oxidising agent (H2O2) increases the surface potential barrier creating more rectifying contacts. These developments are crucial for controllable NW array devices.

Nanosized Chevrel phases for dendrite-free zinc-ion based energy storage: unraveling the phase transformations.

The nanoscale form of the Chevrel phase, Mo6S8, is demonstrated to be a highly efficient zinc-free anode in aqueous zinc ion hybrid supercapacitors (ZIHSCs). The unique morphological characteristics of the material when its dimensions approach the nanoscale result in fast zinc intercalation kinetics that surpass the ion transport rate reported for some of the most promising materials, such as TiS2 and TiSe2. In situ Raman spectroscopy, post-mortem X-ray diffraction, Hard X-ray photoelectron spectroscopy, and density functional theory (DFT) calculations were combined to understand the overall mechanism of the zinc ion (de)intercalation process. The previously unknown formation of the sulfur-deficient Zn2.9Mo15S19 (Zn1.6Mo6S7.6) phase is identified, leading to a re-evaluation of the mechanism of the (de)intercalation process. A full cell comprised of an activated carbon (YEC-8A) positive electrode delivers a cell capacity of 38 mA h g-1 and an energy density of 43.8 W h kg-1 at a specific current density of 0.2 A g-1. The excellent cycling stability of the device is demonstrated for up to 8000 cycles at 3 A g-1 with a coulombic efficiency close to 100%. Post-mortem microscopic studies reveal the absence of dendrite formation at the nanosized Mo6S8 anode, in stark contrast to the state-of-the-art zinc electrode.

Highly active, thermally stable, ethylene-polymerisation pre-catalysts based on niobium/tantalum-imine systems.

The reactions of MCl5 or MOCl3 with imidazole-based pro-ligand L(1)H, 3,5-tBu2-2-OH-C6H2-(4,5-Ph2-1H-)imidazole, or oxazole-based ligand L(2)H, 3,5-tBu2-2-OH-C6H2 (1H-phenanthro[9,10-d])oxazole, following work-up, afforded octahedral complexes [MX(L(1,2))], where MX=NbCl4 (L(1), 1a; L(2), 2a), [NbOCl2(NCMe)] (L(1), 1b; L(2), 2b), TaCl4 (L(1), 1c; L(2), 2c), or [TaOCl2(NCMe)] (L(1), 1d). The treatment of α-diimine ligand L(3), (2,6-iPr2C6H3N=CH)2, with [MCl4(thf)2] (M=Nb, Ta) afforded [MCl4(L(3))] (M=Nb, 3a; Ta, 3b). The reaction of [MCl3(dme)] (dme=1,2-dimethoxyethane; M=Nb, Ta) with bis(imino)pyridine ligand L(4), 2,6-[2,6-iPr2C6H3N=(Me)C]2C5H3N, afforded known complexes of the type [MCl3(L(4))] (M=Nb, 4a; Ta, 4b), whereas the reaction of 2-acetyl-6-iminopyridine ligand L(5), 2-[2,6-iPr2C6H3N=(Me)C]-6-Ac-C5H3N, with the niobium precursor afforded the coupled product [({2-Ac-6-(2,6-iPr2C6H3N=(Me)C)C5H3N}NbOCl2)2] (5). The reaction of MCl5 with Schiff-base pro-ligands L(6)H-L(10)H, 3,5-(R(1))2-2-OH-C6H2CH=N(2-OR(2)-C6H4), (L(6)H: R(1)=tBu, R(2)=Ph; L(7)H: R(1)=tBu, R(2)=Me; L(8)H: R(1)=Cl, R(2)=Ph; L(9)H: R(1)=Cl, R(2)=Me; L(10)H: R(1)=Cl, R(2)=CF3) afforded [MCl4(L(6-10))] complexes (M=Nb, 6a-10a; M=Ta, 6b-9b). In the case of compound 8b, the corresponding zwitterion was also synthesised, namely [Ta(-)Cl5(L(8)H)(+)]·MeCN (8c). Unexpectedly, the reaction of L(7)H with TaCl5 at reflux in toluene led to the removal of the methyl group and the formation of trichloride 7c [TaCl3(L(7-Me))]; conducting the reaction at room temperature led to the formation of the expected methoxy compound (7b). Upon activation with methylaluminoxane (MAO), these complexes displayed poor activities for the homogeneous polymerisation of ethylene. However, the use of chloroalkylaluminium reagents, such as dimethylaluminium chloride (DMAC) and methylaluminium dichloride (MADC), as co-catalysts in the presence of the reactivator ethyl trichloroacetate (ETA) generated thermally stable catalysts with, in the case of niobium, catalytic activities that were two orders of magnitude higher than those previously observed. The effects of steric hindrance and electronic configuration on the polymerisation activity of these tantalum and niobium pre-catalysts were investigated. Spectroscopic studies ((1)H NMR, (13)C NMR and (1)H-(1)H and (1)H-(13)C correlations) on the reactions of compounds 4a/4b with either MAO(50) or AlMe3/[CPh3](+)[B(C6F5)4](-) were consistent with the formation of a diamagnetic cation of the form [L(4)AlMe2](+) (MAO(50) is the product of the vacuum distillation of commercial MAO at +50 °C and contains only 1 mol% of Al in the form of free AlMe3). In the presence of MAO, this cationic aluminium complex was not capable of initiating the ROMP (ring opening metathesis polymerisation) of norbornene, whereas the 4a/4b systems with MAO(50) were active. A parallel pressure reactor (PPR)-based homogeneous polymerisation screening by using pre-catalysts 1b, 1c, 2a, 3a and 6a, in combination with MAO, revealed only moderate-to-good activities for the homo-polymerisation of ethylene and the co-polymerisation of ethylene/1-hexene. The molecular structures are reported for complexes 1a-1c, 2b, 5, 6a, 6b, 7a, 8a and 8c.

Factors that determine and limit the resistivity of high-quality individual ZnO nanowires.

Knowing and controlling the resistivity of an individual nanowire (NW) is crucial for the production of new sensors and devices. For ZnO NWs this is poorly understood; a 10(8) variation in resistivity has previously been reported, making the production of reproducible devices almost impossible. Here, we provide accurate resistivity measurements of individual NWs, using a four-probe scanning tunnelling microscope (STM), revealing a dependence on the NW dimensions. To correctly interpret this behaviour, an atomic level transmission electron microscopy technique was employed to study the structural properties of the NWs in relation to three growth techniques: hydrothermal, catalytic and non-catalytic vapour phase. All NWs were found to be defect free and structurally equivalent; those grown with a metallic catalyst were free from Au contamination. The resistivity measurements showed a distinct increase with decreasing NW diameter, independent of growth technique. The increasing resistivity at small NW diameters was attributed to the dominance of surface states removing electrons from the bulk. However, a fundamental variance in resistivity (10(2)) was observed and attributed to changes in occupied surface state density, an effect which is not seen with other NW materials such as Si. This is examined by a model to predict the effect of surface state occupancy on the measured resistivity and is confirmed with measurements after passivating the ZnO surface. Our results provide an understanding of the primary influence of the reactive nature of the surface and its dramatic effect on the electrical properties of ZnO NWs.

Elucidating the Mechanism of Self-Healing in Hydrogel-Lead Halide Perovskite Composites for Use in Photovoltaic Devices.

Since the emergence of organometal halide perovskite (OMP) solar cells, there has been growing interest in the benefits of incorporating polymer additives into the perovskite precursor, in terms of both photovoltaic device performance and perovskite stability. In addition, there is interest in the self-healing properties of polymer-incorporated OMPs, but the mechanisms behind these enhanced characteristics are still not fully understood. Here, we study the role of poly(2-hydroxyethyl methacrylate) (pHEMA) in improving the stability of methylammonium lead iodide (MAPI, CH3NH3PbI3) and determine a mechanism for the self-healing of the perovskite-polymer composite following exposure to atmospheres of differing relative humidity, using photoelectron spectroscopy. Varying concentrations of pHEMA (0-10 wt %) are incorporated into a PbI2 precursor solution during the conventional two-step fabrication method for producing MAPI. It is shown that the introduction of pHEMA results in high-quality MAPI films with increased grain size and reduced PbI2 concentration compared with pure MAPI films. Devices based on pHEMA-MAPI composites exhibit an improved photoelectric conversion efficiency of 17.8%, compared with 16.5% for a pure MAPI device. pHEMA-incorporated devices are found to retain 95.4% of the best efficiency after ageing for 1500 h in 35% RH, compared with 68.5% achieved from the pure MAPI device. The thermal and moisture tolerance of the resulting films is investigated using X-ray diffraction, in situ X-ray photoelectron spectroscopy (XPS), and hard XPS (HAXPES). It is found that exposing the pHEMA films to cycles of 70 and 20% relative humidity leads to a reversible degradation, via a self-healing process. Angle-resolved HAXPES depth-profiling using a non-destructive Ga Kα source shows that pHEMA is predominantly present at the surface with an effective thickness of ca. 3 nm. It is shown using XPS that this effective thickness reduces with increasing temperature. It is found that N is trapped in this surface layer of pHEMA, suggesting that N-containing moieties, produced during reaction with water at high humidity, are trapped in the pHEMA film and can be reincorporated into the perovskite when the humidity is reduced. XPS results also show that the inclusion of pHEMA enhances the thermal stability of MAPI under both UHV and 9 mbar water vapor pressure.

Deposition of a high entropy thin film by aerosol-assisted chemical vapor deposition.

Herein we report for the first time the synthesis of a high entropy (CuZnCoInGa)S metal sulfide thin film deposited by AACVD using molecular precursors.