Crosstalk mitigation of a controllable annular auto-focusing vortex beam array in a turbulent atmosphere.

In this paper, we introduce a new type of controllable auto-focusing vortex beam array named annular quasi-Airy vortex beam array (QAVBA), which can reduce the crosstalk among different orbital angular momentum (OAM) modes of optical vortex. The effects of initial beam parameters of annular QAVBA and propagation conditions on the OAM mode propagation performance are investigated. The results indicate that the topological angle θ, the topological charge m, and the decay parameter α could manipulate the auto-focusing characteristics of annular QAVBA and regulate the crosstalk of OAM modes. The crosstalk among OAM modes increases with the turbulence strength. Interestingly, the annular QAVBA with obtuse topological angle is favorable for the OAM mode transmitting at far propagation distance or in strong atmospheric turbulence when the decay parameter α is large enough for the energy of annular QAVBA mainly concentrating on the main light ring. Our research provides a reference for optimizing the design of light sources and free-space optical communication system with annular QAVBA.

Quantitative toxicological study of dose-dependent arsenic-induced cells via synchrotron-based STXM and FTIR measurement.

Inorganic arsenic (iAs) is a well-known naturally occurring metalloid with abundant hazards to our environment, especially being a human carcinogen through arsenic-contaminated drinking water. The iAs-related contamination is usually examined by a chemical assay system or fluorescence staining technique to investigate iAs accumulation and its deleterious effects. In this work, we present a dual-modality measurement and quantitative analysis methods for the overall evaluation of various dose-dependent iAs-related cytotoxicological manifestations by the combination of the synchrotron-radiation-based scanning transmission soft X-ray microscopy (SR-STXM) and Fourier transform infrared micro-spectroscopy (SR-FTIR) techniques. The gray level co-occurrence matrix (GLCM) based machine learning was employed on SR-STXM data to quantify the cytomorphological feature changes and the dose-dependent iAs-induced feature classifications with increasing doses. The infrared spectral absorption peaks and changes of dose-dependent iAs-induced cells were obtained by the SR-FTIR technique and classified by the multi-spectral-variate principle component analysis (PCA-LDA) method, showing the separated spatial distribution of dose-dependent groups. In addition, the quantitative comparisons of trivalent and pentavalent iAs under high dose conditions (iAsIII_H & iAsV_H) demonstrated that iAsIII_H and its compounds were more toxic than iAsV_H. This method has a potential in providing the morphological and spectral characteristics evolution of the iAs-related cells or particles, revealing the actual risk of arsenic contamination and metabolism.

High-resolution quantitative phase imaging based on a spatial light modulator and incremental binary random sampling.

We propose a single-beam high-resolution quantitative phase imaging method based on a spatial light modulator (SLM) and an incremental binary random sampling (IBRS) algorithm. In this method, the image of the test object presents on the image sensor through an optical microscopy system composed of an objective lens and a collimating lens. A transmittance SLM displaying a group of well-designed IBRS patterns is inserted in the optical microscopy system to modulate the object wavefront. The phase information of the object image can be quantitatively retrieved from the recorded intensities using the IBRS algorithm and the amplitude obtained directly from the diffraction intensity. The IBRS algorithm employed in our method has higher accuracy for phase retrieval compared with our previously proposed complementary random sampling algorithm, which is confirmed by simulations. Further, we demonstrate experimentally the feasibility of our method through several examples: phase imaging of immersion oil droplets with a diffraction-limited lateral resolution of 1.54 µm and a few microbiological specimens with 0.70 µm. Experimental results reveal that our proposed method provides a feasible single-beam technique for quantitative phase imaging with a high spatial resolution.

Ferromagnetic insulator Cr2Ge2Te6 as a modulator for generating near-infrared bright-dark soliton pairs.

Novel two-dimensional (2D)-materials-based ultra-fast modulators exhibit significance in extending the fundamental investigations and practical applications of mode-locked fiber lasers. In our work, employing the liquid-phase exfoliation method, a ${{\rm Cr}_2}{{\rm Ge}_2}{{\rm Te}_6}$Cr2Ge2Te6 (CGT) optical modulator with a modulation depth and a saturable intensity of 1.64% and ${6.31}\,\,{{\rm MW/cm}^2}$6.31MW/cm2 was fabricated. Due to its suitable modulation properties and high nonlinear coefficient, a stable bright-dark soliton pair was successfully achieved within an Er-doped fiber laser. Under the pump power of 560 mW, the maximum average output power was 5.36 mW with a pulse repetition rate of 1.835 MHz. Our results fully present the capacity of CGT in designing bright-dark soliton operations and provide a meaningful reference for promoting the ultra-fast modulation applications of ferromagnetic insulators.

Double-channel angular-multiplexing polarization holography with common-path and off-axis configuration.

We propose a double-channel angular-multiplexing polarization holographic imaging system with common-path and off-axis configurations. In the system, its input plane is spatially divided into three windows: an object window and two reference windows, and two orthogonal linear polarizers are attached, respectively, on the two reference windows; a two-dimensional cross grating is inserted between the input and output planes of the system. Thus the object beam passing through the object window and the two orthogonal polarized reference beams passing through the two reference windows can overlap each other at the output plane of the system and form a double-channel angular-multiplexing polarization hologram (DC-AM-PH). Using this system, the complex amplitude distributions of two orthogonal polarized components from an object can be recorded and reconstructed by one single-shot DC-AM-PH at the same time. Theoretical analysis and experimental results demonstrated that the system can be used to measure the Jones matrix parameters of polarization-sensitive or birefringent materials.

Wavefront sensing based on a spatial light modulator and incremental binary random sampling.

A wavefront sensing method based on a spatial light modulator (SLM) and an incremental binary random sampling (IBRS) algorithm is proposed. In this method, the recording setup is built just by a transmittance SLM and an image sensor. The tested wavefront incident to the SLM plane can be quantitatively retrieved from the diffraction intensities of the wavefront passed through the SLM displaying a IBRS pattern. Because only two modulation states (opaque and transparent) of the SLM are used, the method does not need to know the concrete modulation function of the SLM in advance. In addition by introducing the concept of the incremental random sampling into wavefront sensing, the adaptability of phase retrieving based on the diffraction intensities is significantly improved. To the best of our knowledge, no previous study has used this concept for the same purpose. Some experimental results are given for demonstrating the feasibility of our method.

Phase retrieval and diffractive imaging based on Babinet's principle and complementary random sampling.

We proposed an iterative method for phase retrieval and diffractive imaging based on Babinet's principle and complementary random sampling (CRS). We demonstrated that the whole complex amplitude (not sieved) of an object wave can be accurately retrieved from the diffraction intensities of the object wave sampled by a group of binary CRS masks and the diffractive imaging for the object can be realized through a single digital inverse diffraction. Some experimental results are given for the demonstration. Our experimental results reveal that, using CRS, the influence of a binary random sampling mask on the retrieved field can be well eliminated, and the accuracy and efficiency of the phase retrieval can be greatly improved.

Determining the vortex densities of random nondiffracting beams.

The evolutionary and statistical properties of the optical vortices that exist in random nondiffracting beams (RNDBs) are analyzed. It is found that the phase singularities (PSs) in the RNDBs originate from the zero rings of Bessel beams with the same ring-shaped spatial spectrum structure (but with zero phase fluctuations) as those of the RNDBs provided. It is also found that the average PS density or vortex density is determined by the average duration of the zero rings of the corresponding Bessel function. According to this model, we successfully derived, for the first time to our knowledge, an analytical formula for quantitatively predicting the PS density of the RNDBs. This formula could be helpful for understanding and designing RNDBs in their applications.

Simple method for generation of vector beams using a small-angle birefringent beam splitter.

A simple and practical system for generation of vector beams with arbitrary polarization and complex-amplitude distributions is proposed. The system mainly consists of a scalar computer-generated hologram (CGH), a small-angle birefringent beam splitter (BBS), and a Fourier lens with a filtering aperture (FA). The CGH is placed in front of the Fourier lens. The BBS is inserted between the CGH and the Fourier lens. When the CGH specially designed according to the method described in this Letter is illuminated by a plane beam or a Gaussian beam, a desired vector beam can be obtained through the FA placed at the back focal plane of the Fourier lens. Because no coupling element and half-wave plate are to be placed between the CGH and the BBS, the extinction ratios of both the two orthogonal polarization components for the vector beam can be better than 10(-5) and so high-quality vector beams can be generated.

Evolution of phase singularities of vortex beams propagating in atmospheric turbulence.

Optical vortex beams propagating through atmospheric turbulence are studied by numerical modeling, and the phase singularities of the vortices existing in the turbulence-distorted beams are calculated. It is found that the algebraic sum of topological charges (TCs) of all the phase singularities existing in test aperture is approximately equal to the TC of the input vortex beam. This property provides us a possible approach for determining the TC of the vortex beam propagating through the atmospheric turbulence, which could have potential application in optical communication using optical vortices.

Phase derivative method for reconstruction of slightly off-axis digital holograms.

A phase derivative (PD) method is proposed for reconstruction of off-axis holograms. In this method, a phase distribution of the tested object wave constrained within 0 to pi radian is firstly worked out by a simple analytical formula; then it is corrected to its right range from -pi to pi according to the sign characteristics of its first-order derivative. A theoretical analysis indicates that this PD method is particularly suitable for reconstruction of slightly off-axis holograms because it only requires the spatial frequency of the reference beam larger than spatial frequency of the tested object wave in principle. In addition, because the PD method belongs to a pure local method with no need of any integral operation or phase shifting algorithm in process of the phase retrieval, it could have some advantages in reducing computer load and memory requirements to the image processing system. Some experimental results are given to demonstrate the feasibility of the method.

One-step Jones matrix polarization holography for extraction of spatially resolved Jones matrix of polarization-sensitive materials.

We propose, for the first time to our knowledge, a method for realizing one-step measurement of two-dimensional Jones matrix parameters of polarization-sensitive materials. This method could be called one-step Jones matrix polarization holography (JMPH). Our theoretical analysis and the experimental results demonstrate that a double-source polarization interferometer combined with angular multiplexing holography make it possible to realize one-step holographic measurements of four spatially resolved Jones matrix parameters. Compared with the existing methods, our one-step JMPH has a simpler optical arrangement and easier measuring procedure. We believe that it will provide a new approach for development of an integrated system suitable for measuring, in real-time, a Jones matrix or transmittance matrix, as well as dynamic polarization imaging.