Multi-target bioactive compound screening from the infructescence of Platycarya strobilacea Sieb. et Zucc. by affinity chromatography using immobilized ß2 -adrenoceptor and muscarinic-3 acetylcholine receptor as the stationary phase.

As a main source for the recognition and identification of lead compounds, traditional Chinese medicine plays a pivotal role in preventing diseases for years. However, screening bioactive compounds from traditional Chinese medicine remains challenging because of the complexity of the systems and the occurrence of the synergic effect of the compounds. The infructescence of Platycarya strobilacea Sieb. et Zucc is prescribed for allergic rhinitis treatment with unknown bioactive compounds and unclear mechanisms. Herein, we immobilized the ß2 -adrenoceptor and muscarine-3 acetylcholine receptor onto the silica gel surface to prepare the stationary phase in a covalent bond through one step. The feasibility of the columns was investigated by the chromatographic method. Ellagic acid and catechin were identified as the bioactive compounds targeting the receptors. The binding constants of ellagic acid were calculated to be (1.56 ± 0.23)×107  M-1 for muscarine-3 acetylcholine receptor and (2.93 ± 0.15)×107  M-1 for ß2 -adrenoceptor by frontal analysis. While catechin can bind with muscarine-3 acetylcholine receptor with an affinity of (3.21 ± 0.05)×105  M-1 . Hydrogen bonds and van der Waals' force were the main driving forces for the two compounds with the receptors. The established method provides an alternative for multi-target bioactive compound screening in complex matrices.

Polymer brush grafted immobilized metal ion affinity adsorbent based on polydopamine/polyethyleneimine-coated magnetic graphene oxide for selective enrichment of cytokinins in plants.

An immobilized metal affinity (IMAC) adsorbent was prepared for selective enrichment of adenine type CKs, via grafting polymer chain pendant with iminodiacetic acid (IDA) from polydopamine (PDA)/polyethyleneimine (PEI)-coated magnetic graphene oxide (magGO) via surface-initiated-atom transfer radical polymerization (SI-ATRP). The prepared IMAC sorbent exhibited remarkable adsorption performances and good selectivity for adenine-type CKs and was utilized as a sorbent of magnetic solid-phase extraction (MSPE) for effective enrichment of four adenine-type CKs in bean sprouts. Under the optimized extraction conditions, an analytical method for four adenine type CKs in bean sprouts was established by combining the MSPE combined with ultra-high-performance liquid chromatography-tandem mass spectrometry (UHPLC-MS/MS). The recoveries of the analytes were between 80.4 ± 1.9% and 114.6 ± 1.5% (n = 3). The limits of detection (LODs) range from 0.63 to 2.30 pg⋅mL-1. The relative standard deviations of intra-day and inter-day were less than 12.6%. The established method was successfully applied to the selective extraction and sensitive detection of trace adenine-type CKs in plant samples.

Carbon quantum dots with pH-responsive orange-/red-light emission for fluorescence imaging of intracellular pH.

N-doped carbon quantum dots (N-CDs) with polyaminobenzene hydrazine as precursor were prepared by solvothermal method for the monitoring of pH fluctuation in HeLa cells via fluorescence imaging. The N-CDs show two emission wavelengths at 582 and 640 nm under different pH with two excitation wavelengths. The fluorescence intensity at 640 nm (λex = 520 nm) and the ratio of F582/F640 (λex = 470 nm) linearly increase with pH in the range of 2.4 ~ 3.6 (R2 = 992) and 5.6 ~ 7.6 (R2 = 0.987), respectively. The sensor exhibits high sensitivity and reversibility and anti-interference capability, thus enabling sensing pH change in intracellular environment in real time, as demonstrated by successful monitoring of intracellular pH fluctuation during H2O2 stimulation in HeLa cells.

Adjusting the chromatographic properties of poly(ionic liquid)-modified stationary phases by substitution on the imidazolium cation.

Poly(ionic liquid)-modified stationary phases can have multiple interactions with solutes. However, in most stationary phases, separation selectivity is adjusted by changing the poly(ionic liquid) anions. In this work, two poly(ionic liquid)-modified silica stationary phases were prepared by introducing the cyano or tetrazolyl group on the pendant imidazolium cation on the polymer chains. Various analytes were selected to investigate their mechanism of retention in the stationary phases using different mobile phases. Two poly(ionic liquid)-modified stationary phases can provide various interactions toward solutes. Compared to the cyano-functionalized poly(ionic liquid) stationary phase, the tetrazolyl-functionalized poly(ionic liquid) stationary phase provides additional cation-exchange and π-π interactions, resulting in different separation selectivity toward analytes. Finally, applicability of the developed stationary phases was demonstrated by the efficient separation of nonsteroidal anti-inflammatory drugs.

One-step hydrothermal synthesis of magnetic nitrogen-doped graphene for magnetic solid-phase extraction of nonsteroidal anti-inflammatory drugs in environmental water samples.

Graphene oxide has received extensive attention because of its unique properties and potential applications. In this study, magnetic nitrogen-doped graphene was prepared by one-step hydrothermal reaction using urea as the dopant and reductant, and ferroferric oxide nanoparticles were in situ deposited on the surface of the nanohybrids. The magnetic nitrogen-doped graphene was characterized using various physical and chemical methods. It was used as a new adsorbent for the magnetic solid-phase extraction of four nonsteroidal anti-inflammatory drugs from the river water. The parameters influencing the extraction efficiency were optimized in detail. Under optimal conditions, this method provided a wide linear range (5-200 ng/mL). The limits of detection were in the range of 1.07-5.10 ng/mL. The recoveries varied from 81.2 to 121.5% with relative standard deviations of less than 10.8%. Overall, we can conclude that the proposed method offers an efficient pretreatment and enrichment and can be successfully applied for the extraction and determination of nonsteroidal anti-inflammatory drugs in complex matrices.

Preparation of bottlebrush polymer-modified magnetic graphene as immobilized metal ion affinity adsorbent for purification of hemoglobin from blood samples.

An immobilized metal affinity (IMA) adsorbent was prepared by grafting bottlebrush polymer pendant with iminodiacetic acid (IDA) from the surface of polydopamine (PDA)-coated magnetic graphene oxide (magGO), via surface-initiated atom transfer radical polymerization (SI-ATRP). Poly(hydroxyethyl methacrylate) (PHEMA) was grafted firstly from the PDA-coated magGO as the backbone, and then poly(glycidyl methacrylate) was grafted from the PHEMA chains via the second SI-ATRP to afford the bottlebrush polymer-grafted magGO Thereafter, IDA was anchored on the nanocomposites to produce the IMA adsorbent after chelating copper ions. The adsorbent was characterized by various physical and physicochemical methods. Its adsorption properties were evaluated by using histidine-rich proteins (bovine hemoglobin, BHb) and other proteins (lysozyme and cytochrome-C). The results show that its maximum adsorption capacity to BHb was 378.6 mg g-1, and the adsorption equilibrium can be quickly reached within 1 h. The adsorbent has excellent reproducibility and reusability. It has been applied to selectively purify hemoglobin from human whole blood, indicating its potential in practical applications. Graphical abstract.

Magnetic mesoporous nanoparticles modified with poly(ionic liquids) with multi-functional groups for enrichment and determination of pyrethroid residues in apples.

Considering that the determination of pyrethroid residues is of value for the safety of food, a new poly(ionic liquid)-functionalized magnetic mesoporous nanoparticle was designed and used as an adsorbent in magnetic solid-phase extraction for the enrichment of eight pyrethroids. The porous structure and large surface area of the mesoporous silica shell endow the adsorbent with abundant binding sites. In contrast to the reported poly(ionic liquids) with only one kind of functional group in the cationic part, the new poly(ionic liquids) with mixed cyano and phenyl groups in cationic part matched the chemical structure of the analytes to improve extraction efficiency. Under the optimum conditions, an effective method was established for the determination of eight pyrethroids in apples. Adsorption equilibrium can be quickly reached in 1 min, greatly decreasing the extraction time. The linearity range was found to be 10-200 ng/g, and the detection limits ranged from 0.24 to 1.99 ng/g. Recoveries of analytes in apple samples ranged from 87.3 to 119.0%, with relative standard deviations varying in the range of 3-21.2% (intraday) and 0.3-15.2% (interday). The results indicate that the proposed method is a good candidate for pyrethroid residues in apple samples.

Core-shell structured magnetic mesoporous carbon nanospheres derived from metal-polyphenol coordination polymer-coated Fe3 O4 and its application in the enrichment of phthalates from water samples.

In this work, core-shell structured magnetic mesoporous carbon nanospheres were fabricated from the carbonization of metal-polyphenol coordination polymer-coated Fe3 O4 nanoparticles. The preparation method is simple, fast, versatile, and easy to scale up. Magnetic mesoporous carbon nanospheres exhibit a high specific surface area, high superparamagnetism, and high adsorption efficiencies for phthalates. Four phthalates were extracted from aqueous solutions by using magnetic mesoporous carbon nanospheres via magnetic solid phase extraction. Subsequent analysis was performed by using high-performance liquid chromatography with ultraviolet detection. The analytical method has good linearity in the concentration range of 1-200 ng/mL for diethyl phthalate, diisobutyl phthalate, and dicyclohexyl phthalate, and 3-200 ng/mL for dipropyl phthalate. The limits of detection were in the range of 0.10-0.62 ng/mL. Compared with previous methods, this method has a lower detection limit, wider linearity range, and faster adsorption and desorption rates. The results indicate that magnetic mesoporous carbon nanospheres are suitable for the enrichment of hydrophobic substances from aqueous solutions.

Functionalized MoS2 Nanovehicle with Near-Infrared Laser-Mediated Nitric Oxide Release and Photothermal Activities for Advanced Bacteria-Infected Wound Therapy.

The rising dangers of bacterial infections have created an urgent need for the development of a new generation of antibacterial nanoagents and therapeutics. A new near-infrared 808 nm laser-mediated nitric oxide (NO)-releasing nanovehicle (MoS2 -BNN6) is reported through the simple assembly of α-cyclodextrin-modified MoS2 nanosheets with a heat-sensitive NO donor N,N'-di-sec-butyl-N,N'-dinitroso-1,4-phenylenediamine (BNN6) for the rapid and effective treatment of three typical Gram-negative and Gram-positive bacteria (ampicillin-resistant Escherichia coli, heat-resistant Escherichia faecalis, and pathogen Staphylococcus aureus). This MoS2 -BNN6 nanovehicle has good biocompatibility and can be captured by bacteria to increase opportunities of NO diffusion to the bacterial surface. Once stimulated by 808 nm laser irradiation, the MoS2 -BNN6 nanovehicle not only exhibits photothermal therapy (PTT) efficacy but also can precisely control NO release, generating oxidative/nitrosative stress. The temperature-enhanced catalytic function of MoS2 induced by 808 nm laser irradiation simultaneously accelerates the oxidation of glutathione. This acceleration disrupts the balance of antioxidants, ultimately resulting in significant DNA damage to the bacteria. Within 10 min, the MoS2 -BNN6 with enhanced PTT/NO synergetic antibacterial function achieves >97.2% inactivation of bacteria. The safe synergetic therapy strategy can also effectively repair wounds through the formation of collagen fibers and elimination of inflammation during tissue reconstruction.

Use of phenyl/tetrazolyl-functionalized magnetic microspheres and stable isotope labeled internal standards for significant reduction of matrix effect in determination of nine fluoroquinolones by liquid chromatography-quadrupole linear ion trap mass spectrometry.

In this study, the strategy of unique adsorbent combined with isotope labeled internal standards was used to significantly reduce the matrix effect for the enrichment and analysis of nine fluoroquinolones in a complex sample by liquid chromatography coupled to quadrupole linear ion trap mass spectrometry (LC-QqQLIT-MS/MS). The adsorbent was prepared conveniently by functionalizing Fe3O4@SiO2 microspheres with phenyl and tetrazolyl groups, which could adsorb fluoroquinolones selectively via hydrophobic, electrostatic, and π-π interactions. The established magnetic solid-phase extraction (MSPE) method as well as using stable isotope labeled internal standards in the next MS/MS detection was able to reduce the matrix effect significantly. In the process of LC-QqQLIT-MS/MS analysis, the precursor and product ions of the analytes were monitored quantitatively and qualitatively on a QTrap system equipped simultaneously with the multiple reaction monitoring (MRM) and enhanced product ion (EPI) scan. Subsequently, the enrichment method combined with LC-QqQLIT-MS/MS demonstrated good analytical features in terms of linearity (7.5-100.0 ng mL-1, r > 0.9960), satisfactory recoveries (88.6%-118.3%) with RSDs < 12.0%, LODs = 0.5 µg kg-1 and LOQs = 1.5 µg kg-1 for all tested analytes. Finally, the developed MSPE-LC-QqQLIT-MS/MS method had been successfully applied to real pork samples for food-safety risk monitoring in Ningxia Province, China. Graphical abstract Mechanism of reducing matrix effect through the as-prepared adsorbent.

Selective extraction of theophylline from plasma by copper-doped magnetic microspheres prior to its quantification by HPLC.

The authors describe the preparation of copper-doped magnetic microspheres (Cu-Fe3O4) by a solvothermal method. Due to their good magnetic property and high affinity for compounds containing an imidazole moiety (containing N-H), they are excellent adsorbents for such compounds as tested by eighteen compounds. Specifically, a method has been developed for magnetic solid-phase extraction (MSPE) of theophylline (TP) from plasma. The method enables selective enrichment of TP over many potential interferents that can occur in plasma. Following elution with alkaline methanol, TP was quantified by HPLC-UV at a detection wavelength of 272 nm. Under the optimized conditions, a linear response is found for the 0.02 to 20 µg·mL-1 concentration range, and the limit of detection is as low as 3 ng·mL-1. Recoveries from spiked samples range from 91.2 to 100.4%, and the repeatabilities are between 2.9 and 12% (for n = 6). The method was successfully applied to the determination of TP in rabbit and rat plasma. Graphical abstract Copper-doped magnetic microspheres are described that show good magnetic property and high affinity for compounds containing an imidazole moiety (containing an N-H group). They were successfully applied to the selective extraction of theophylline in plasma.

Preparation of a boronate affinity material with ultrahigh binding capacity for cis-diols by grafting polymer brush from polydopamine-coated magnetized graphene oxide.

Poly(3-acrylamidophenylboronic acid) (PAAPBA) was grafted onto polydopamine-coated magnetic graphene oxide via surface-initiated atom transfer radical polymerization to obtain a new kind of boronate affinity material (BAM). The BAM possesses good water dispersity and adsorption capacities as high as 154, 357, 588 and 1111 µmol·g-1 for adenosine, salbutamol, dopamine and catechol, respectively. For the molecules without nitrogen atoms, the BAM can selectively capture the cis-diols under the interference of non-cis-diols. For molecules containing nitrogen, the non-cis-diols are also retained, but much less than the cis-diols. The selectivity can be improved by adding salts to facilitate complexation and to suppress the electrostatic interaction between cis-diols and the boronic acid ligand. The BAM was successfully employed to the enrichment of catecholamines from real urine samples. Results indicate that it is a promising material for the pretreatment of real samples. Graphical abstract Schematic of the preparation of an ultrahigh capacity boronate affinity material by grafting polymer brush from polydopamine coated magnetic graphene oxide. The material has good selectivity to cis-diol-containing molecules and can be applied to enrich catecholamines in urine samples.

A magnetic adsorbent grafted with pendant naphthyl polymer brush for enrichment of the nonsteroidal anti-inflammatory drugs indomethacin and diclofenac.

Poly(2-naphthyl acrylate) was first grafted onto silica-coated magnetic nanoparticles by surface-initiated atom transfer radical polymerization to prepare a reversed-phase magnetic adsorbent. The resulting polymer brush displays enhanced extraction efficiency by offering active sites on the surfaces of adsorbent. It was applied to the preconcentration of the non-steroidal antiinflammatory drugs (NSAIDs) indomethacin (InDo) and diclofenac (DIC). These drugs interact with the sorbent through hydrophobic and π-interactions, and via electrostatic attraction. By coupling the magnetic solid-phase extraction with HPLC, a method for analysis of InDo and DIC in the environmental water samples was established. The limits of detection range from 0.62 to 0.64 ng·mL-1, and the relative standard deviations for intra-and inter-day analyses of spiked water samples are <11.9%, and relative recoveries are between 62.1 and 96.7%. Graphical abstract A reversed-phase magnetic adsorbent was prepared by grafting poly(2-naphthyl acrylate) brush on the surface of silica coated magnetic nanoparticles. Due to the two conjugated aromatic rings of the monomer, the polymer brush can effectively extract non-steroidal anti-inflammatory drugs through strong π- and hydrophobic interactions.

Tunable composites prepared from graphene oxide and zeolitic imidazolate framework-8 for improved selective isolation of hemoglobin.

The authors report on the preparation of composites made from graphene oxide (GO) and zeolitic imidazolate framework-8 (ZIF-GO), with various fractions of GO. GO acts as the template and as a modulator for the surface properties of the composites. It also improves the selective adsorption of specific proteins, i.e. hemoglobin (Hb) in this case. The adsorption capacity for Hb is as high as 436 mg g-1 when using a composite containing 20% of GO as sorbent, and 95% of specific activity is maintained for the Hb recovered. The sorbent is applied to selectively isolate Hb from human whole blood. Graphical abstract Graphene oxide-zeolitic imidazolate framework-8 composites (ZIF-GO) with varying mass ratios of GO were prepared in order to tune surface properties and to improve the adsorption selectivity toward hemoglobin.

Controllable preparation of a hydrophilic/ion-exchange mixed-mode stationary phase by surface-initiated atom transfer radical polymerization using a mixture of two functional monomers.

Mixed-mode chromatographic stationary phases require functionalization with at least two functional groups to yield multiple interactions with analytes. Departing from reported methods, a mixture of two different monomers, glycidyl methacrylate and 2-dimethylaminoethylmethacrylate, was grafted onto the surface of silica by a one-step surface-initiated atom transfer radical polymerization to prepare a novel hydrophilic interaction/anion-exchange mixed-mode chromatographic stationary phase. The grafted amounts of functional groups were controlled via varying the ratio of monomers in the polymerization system. The influences of water content, salt concentration and pH in the mobile phase were investigated to illustrate the mixed interaction between the stationary phase and analytes. The retention of various solutes on three columns, especially acidic and basic solutes, showed an obvious dependence on the ratio of the two monomers in the polymerization system. The results indicated that the strategy proposed in this work was beneficial to develop various types of mixed-mode chromatographic stationary phases with adjustable selectivity to meet the needs of complex samples. Finally, the column was successfully employed in the isolation of melamine in liquid milk.

Preparation and evaluation of diblock copolymer-grafted silica by sequential surface initiated-atom transfer radical polymerization for reverse-phase/ion-exchange mixed-mode chromatography.

A novel approach that involved the grafting of diblock copolymer with two types of monomer onto substrate by sequential surface initiated-atom transfer radical polymerization was proposed to prepare a mixed-mode chromatographic stationary phase. The distinguishing feature of this method is that it can be applied in the preparation of various mixed-mode stationary phases. In this study, a new reverse-phase/ion-exchange stationary phase was prepared by grafting hydrophobic styrene and cationic sodium 4-styrenesulfonate by the proposed approach onto silica surface. The chromatographic properties of the prepared stationary phase were evaluated by the separation of benzene derivatives, anilines, and ß-agonists, and by the effect of pH values and acetonitrile content on the retention. Compared with typical RP columns, the prepared stationary phase achieved the better resolution and higher selectivity at a shorter separation time and lower organic content. Moreover, the application of the prepared column was proved by separating widely distributed polar and charged compounds simultaneously.

Novel bis(5-methyltetrazolium)amine ligand-bonded stationary phase with reduced leakage of metal ions in immobilized metal affinity chromatography of proteins.

Immobilized metal affinity chromatography (IMAC) has been widely used for the specific separation of biopolymers. However, leakage of metal ions from IMAC adsorbents is of concern in IMAC. In this study, we designed a novel tridenate bis(5-methyltetrazolium)amine (BMTA) to reduce the leakage of metal ions by improving the affinity to immobilized metal ions. The ligand was bonded onto silica via three-step reaction to prepare a high-performance IMAC stationary phase. The chromatographic behaviors of ribonuclease A, cytochrome c, and lysozyme on the Cu(II)-, Ni(II)-, and Zn(II)-chelated stationary phase were investigated with respect to pH effect and elution with an imidazole gradient. The retention times of these three proteins increased by increasing the pH of the mobile phase but decreased by increasing the concentration of the competitive displacer. The retaining strength of the three proteins on the chelated stationary phase were in the order Cu(II) > Ni(II) > Zn(II). The behavior of these three proteins was consistent with the properties of a typical IMAC. The BMTA ligand exhibited a much stronger affinity for Cu(II) and Ni(II) than iminodiacetic acid (IDA), which is often regarded as a standard tridentate IMAC ligand. Quantum mechanical calculations at the B3LYP/6-31G level were used to image the coordination mode of the protein-metal ions-BMTA complex. In addition, a fused histidine-tagged cecropin b-human epidermal growth factor (CB-EGF) from Escherichia coli crude extract was purified by the Ni(II)-chelated stationary phase, and the purity of the CB-EGF was determined to be at least 90 %. These results suggest that the BMTA ligand may have potential applications in the preparation of therapeutics. Graphical Abstract A novel ligand of tridenate bis(5-methyltetrazolium)amine (BMTA) was designed to reduce the leakage of metal ions from the column in immobolized metal affinity chromatography (IMAC).

Boronate affinity adsorption of cis-diol-containing biomolecules in nonaqueous solvent.

Boronate affinity has attracted much attention in recent years. It has been broadly used for selective isolation and enrichment of cis-diol-containing molecules. Conventionally, the cis-diols are adsorbed in mild alkaline aqueous solutions. In this work, for the first time, we found that boronate affinity adsorption could also be performed in nonaqueous solvent at nonbasic pH. Cis-diol-containing compounds present in herbal medicines were used for the adsorption test. The results indicated that all compounds obtained higher recoveries in the organic solvents (methanol, acetonitrile, ethyl acetate) compared with alkaline buffer. The adsorption of vicinal cis-diol-containing molecules in organic solvents could be accomplished rapidly, with high selectivity and high recoveries (>80%). These results shed light on the possibility of boronate affinity adsorption in nonaqueous solvents. The results are very important for the isolation and enrichment of cis-diols, which have poor solubility in water, especially for those in herbal medicines.

Synthesis and application of boronic acid-functionalized magnetic adsorbent for sensitive analysis of salbutamol residues in pig tissues.

Salbutamol (SAL) is the most widely used ß2 -agonist drug for asthma and chronic obstructive pulmonary patients, but it is also often abused as feed additive. In recent years, the abuse of SAL has led to a large number of food safety incidents. Therefore, the monitoring of SAL residues in animal products is very important. A highly selective boronate affinity magnetic adsorbent was synthesized and developed for detection of trace levels of SAL residues in pig tissue samples. The obtained Fe3O4@SiO2@FPBA(4-formylphenylboronic acid) magnetic adsorbent showed good adsorption ability to catechol and SAL, and then it was successfully applied as special magnetic solid-phase phase extraction adsorbent coupled with high-performance liquid chromatography (HPLC) for simultaneous isolation and determination of cis-diol compounds. The binding capacity of catechol and SAL reached 96 and 50 µmol/g, respectively. The method was successfully established for the detection of trace levels of SAL in pig tissue samples. The linear range extended from 0.32 to 800 µg/kg (R(2) = 0.9994). The limit of detection of SAL was 0.19 µg/kg. The recoveries were satisfactory (89.5-108.0%) at three spiked levels with RSD between 2.1 and 11.3%. These results indicated that the method has potential for enrichment and detection of trace levels of SAL residual in animal food products.

External surface hydrophilic 3D-POSS-COF@GDL for the direct adsorption of bisphenols in milk samples.

In case of organic frameworks (COFs) as adsorbents in the pretreatment of complex food matrices, challenges such as poor dispersion and non-specific adsorption of interfering macromolecules like proteins are often encountered. To address this issue, this work prepared a three-dimensional covalent organic framework (3D-COF) with a novel bcu topology based on polyhedral oligomeric silsesquioxane (POSS). Subsequently, gluconolactone (GDL) was modified onto the external surface of the material via the reaction with the exposed reactive residues. The resulting POSS-COF@GDL adsorbent has an enhanced hydrophilicity in the external surface, thereby significantly improves the dispersion of materials in aqueous solution and reduces the adsorption ability toward protein. Whereas, the inner of material retains hydrophobic pores that exhibit high adsorption efficiency to small hydrophobic molecules. Compared with the traditional pretreatment methods, POSS-COF@GDL can directly extract bisphenols (BPs) in milk samples without any additional treatment. The established sample pretreatment method is coupled with high-performance liquid chromatography-ultraviolet detection (HPLC-UV), resulting in recoveries of 71.8 to 93.6%, intra- and inter-day relative standard deviations (RSDs) of <8.3%, and limits of detection (LODs) of 0.042-0.16 ng∙mL-1 for four BPs.