Dual-probe ligation without PCR for fluorescent sandwich assay of EGFR nucleotide variants in magnetic gene capture platform.

A simple, rapid, and highly efficient fluorescent detection technique without PCR through dual-probe ligation with the genetic capture of magnetic beads and reported probe was developed for determination of epidermal growth factor receptor (EGFR) gene exon 19 deletions. The EGFR exon 19 deletion mutation makes up 48% of all mutations associated with anti-tyrosine kinase inhibition sensitivity, and thus, the EGFR nucleotide variant is very important in clinical diagnosis. In this approach, the dual-probe ligation was designed to target exon 19 deletion. The magnetic genetic captured system was then applied to capture the successful dual-probe ligation. Thereafter, a reporter probe which is coupled with 6-fluorescein amidite (6-FAM) was introduced to hybridize with dual-probe ligation product on the surface of streptavidin magnetic beads, and finally, the supernatant was taken for fluorescence measurements for distinguishing mutant types from wild types. After optimization (the RSD of the fluorescent intensity was less than 4.5% (n = 3) under the optimal condition), 20 blind DNA samples from the population were analyzed by this technique and further confirmed by direct sequencing. The results of our assay matched to those from direct sequencing data, evidencing that the developed method is accurate and successful. These 20 blind DNA samples were diagnosed as wild and then spiked with different percentages of the mutant gene to quantify the ratio of the wild and mutant genes. This strategy was also successfully applied to quantify the ratio of the wild and mutant genes with good linearity at the λex/λem of 480 nm/520 nm (r = 0.996), and the limit of detection reached 1.0% mutant type. This simple fluorescent detection of nucleotide variants shows its potential to be considered a tool in biological and clinical diagnosis. Importantly, this strategy offers a universal detection capability for any kind of mutation (point, deletion, insertion, or substitution) in a gene of interest.

Copper nanoclusters on specific-primer PCR fragments with magnetic capture for the label-free fluorescent sensing of the T315I single nucleotide variant in the BCR-ABL1 gene.

In this study, a simple and facile procedure using the all or none formation of double-stranded DNA-templated copper nanoclusters on specific-primer PCR fragments was designed to fluorescently identify the T315I single nucleotide variant on the BCR-ABL1 gene. Chronic myeloid leukaemia (CML), a disease caused by the BCR-ABL1 fusion of tyrosine kinase, is well known for the T315I mutation that causes tyrosine kinase inhibitors (TKIs) to be resisted due to the alternative structure of the drug-binding site. Therefore, it is an important single nucleotide variant for clinical detection. In this study, only specific functional primers and the digestion of the wild genotype from the T315I mutation site with specific restriction enzymes were designed, and the different digested products could then be captured using magnetic beads. The final products would allow for fluorescent sensing via the all or none formation of double-stranded DNA-templated copper nanoclusters for the detection of the T315I mutation. This study has been successfully applied for identifying wild and mutant homozygotes and the mutant/wild heterozygote of the T315I mutation. It is expected that this analytical system can serve as a tool for the clinical diagnosis of T315I mutations and be applied to real samples of CML patients in the future.

Fluorescent aptasensor based on conformational switch-induced hybridization for facile detection of ß-amyloid oligomers.

Aß oligomers (AßO) are a dominant biomarker for early Alzheimer's disease diagnosis. A fluorescent aptasensor coupled with conformational switch-induced hybridization was established to detect AßO. The fluorescent aptasensor is based on the interaction of fluorophore-labeled AßO-specific aptamer (FAM-Apt) against its partly complementary DNA sequence on the surface of magnetic beads (cDNA-MBs). Once the FAM-Apt binds to AßO, the conformational switch of FAM-Apt increases the tendency to be captured by cDNA-MBs. This causes a descending fluorescence of supernatant, which can be utilized to determine the levels of AßO. Thus, the base-pair matching above 12 between FAM-Apt and cDNA-MBs with increasing hybridizing free energies reached the ascending fluorescent signal equilibrium. The optimized aptasensor showed linearity from 1.7 ng mL-1 to 85.1 (R = 0.9977) with good recoveries (79.27-109.17%) in plasma. Furthermore, the established aptasensor possesses rational selectivity in the presence of monomeric Aß, fibrotic Aß, and interferences. Therefore, the developed aptasensor is capable of quantifying AßO in human plasma and possesses the potential to apply in clinical cases.

Integration of Deep Learning Network and Robot Arm System for Rim Defect Inspection Application.

Automated inspection has proven to be the most effective approach to maintaining quality in industrial-scale manufacturing. This study employed the eye-in-hand architecture in conjunction with deep learning and convolutional neural networks to automate the detection of defects in forged aluminum rims for electric vehicles. RobotStudio software was used to simulate the environment and path trajectory for a camera installed on an ABB robot arm to capture 3D images of the rims. Four types of surface defects were examined: (1) dirt spots, (2) paint stains, (3) scratches, and (4) dents. Generative adversarial network (GAN) and deep convolutional generative adversarial networks (DCGAN) were used to generate additional images to expand the depth of the training dataset. We also developed a graphical user interface and software system to mark patterns associated with defects in the images. The defect detection algorithm based on YOLO algorithms made it possible to obtain results more quickly and with higher mean average precision (mAP) than that of existing methods. Experiment results demonstrated the accuracy and efficiency of the proposed system. Our developed system has been shown to be a helpful rim defective detection system for industrial applications.

Specific Gene Capture Combined with Restriction-Fragment Release for Directly Fluorescent Genotyping of Single-Nucleotide Polymorphisms in Diagnosing Spinal Muscular Atrophy.

In this study, a fast and simple fluorescent genotyping strategy, streptavidin magnetic beads combined with biotin-coupled PCR and restriction-fragment release, was developed for determination of nucleotide variants. This method was further applied for analyzing SMN1 gene in diagnosis of spinal muscular atrophy (SMA). After biotin-coupled PCR, the streptavidin magnetic beads would capture the biotin-labeled SMN genetic fragments, and then the restriction enzyme of HPY188I could only digest and release the fluorescent end of SMN1 genetic fragment into the supernatant. Therefore, the SMN1 gene could be easily fluorescently quantified, and SMN2 would not, for diagnosis of SMA. The copy number of the SMN1 gene could be regressed using the relative fluorescent unit versus the known copy number, and the coefficient of correlation is equal to 0.9617 ( r = 0.9617). In this research, a total of 16 blind DNA samples were analyzed, including 6 wild types, 5 carriers, and 5 SMA patients. Importantly, this fast, simple, and highly efficient method is universal for detection of all nucleotides variants by replacing the specific restriction enzyme. This technique has the potency to be served as a tool for fast and accurate diagnosis of genotypes in clinical medicine.

Biomedical Applications of DNA-Conjugated Gold Nanoparticles.

Gold nanoparticles (AuNPs) are useful for diagnostic and biomedical applications, mainly because of their ease in preparation and conjugation, biocompatibility, and size-dependent optical properties. However, bare AuNPs do not possess specificity for targets. AuNPs conjugated with DNA aptamers offer specificity for various analytes, such as proteins and small molecules/ions. Although DNA aptamers themselves have therapeutic and target-recognizing properties, they are susceptible to degradation in vivo. When DNA aptamers are conjugated to AuNPs, their stability and cell uptake efficiency both increase, making aptamer-AuNPs suitable for biomedical applications. Additionally, drugs can be efficiently conjugated with DNA aptamer-AuNPs to further enhance their therapeutic efficiency. This review focuses on the applications of DNA aptamer-based AuNPs in several biomedical areas, including anticoagulation, anticancer, antibacterial, and antiviral applications.

Label-Free Fluorescent Copper Nanoclusters for Genotyping of Deletion and Duplication of Duchenne Muscular Dystrophy.

Real applications in clinical diagnosis of label-free fluorescent copper nanoclusters (CuNCs) are demonstrated. Double-strand DNA (dsDNA) can act as an effective template for the formation of CuNCs, which can be used to distinguish the deletion or duplication genotypes of Duchenne muscular dystrophy (DMD) due to different fluorescent intensities. After PCR, the DMD amplicons reacted with copper ion by reduction of ascorbic acid and generated fluorescence. The exons of the DMD gene were taken as the model analytes for genetic diagnosis. In this sensing system, the deletion type does not show fluorescence; on the other hand, the duplication type emits higher fluorescence than normal type. Parameters of this sensing system were optimized, including PCR conditions, levels of copper ion and ascorbate, and reaction time. The DMD-dominated exons 45, 46, and 47 were detected, and the method was applied to six samples of DMD patients. The results were consistent with those of the multiplex ligation-dependent probe amplification method. This strategy was feasible to detect all exons of this disease.

Genotyping of exons 1 to 20 in Duchenne muscular dystrophy by universal multiplex PCR and short-end capillary electrophoresis.

One rapid CE method was established to diagnose Duchenne muscular dystrophy (DMD). DMD is a severe recessive inherited disorder frequently caused by gene deletions. Among them, exons 1-20 account for nearly 30% of occurrences. In this study, the universal multiplex PCR was used to enhance the fluorescently labeling efficiency, which was performed only by one universal fluorescent primer. After PCR, a short-end injection CE (short-end CE) speeded up the genotyping of the DMD gene. This method involved no extra purification, and was completed within 9 min. The CE conditions contained a polymer solution of 1.5% hydroxylethylcellulose in 1× TBE buffer at 6 kV for separation. This method was applied to test six DMD patients and one healthy male person. The results showed good agreement with those of multiplex ligation-dependent probe amplification. This method can be applied for clinical diagnosis of DMD disease. Accurate diagnosis of the DMD gene is the best way to prevent the disease.

Genotyping of intron 22 inversion of factor VIII gene for diagnosis of hemophilia A by inverse-shifting polymerase chain reaction and capillary electrophoresis.

This is the first capillary electrophoresis (CE) analysis for diagnosis of hemophilia A (HA). The intron 22 inversion of factor VIII gene (F8) causes 40-50 % of severe bleeding disorder of HA in all human populations. Consequently, identification of the disease-causing mutations is becoming increasingly important for accurate genetic counseling and prenatal diagnosis. In this study, the key steps of inverse-shifting polymerase chain reaction (IS-PCR) and of short-end injection capillary electrophoresis were used for more specific and rapid genotyping of intron 22 inversion of F8. In IS-PCR, three specific primers were used to amplify 512-bp amplicon for wild type and 584-bp amplicon for patients with intron 22 inversion. The capillary gel electrophoresis (CGE) system was performed using 1× Tris-borate-EDTA (TBE) buffer containing 0.3 % (w/v) polyethylene oxide (PEO). The PCR amplicons were electrokinetically injected at 10 kV for 10 s at a temperature of 25 °C. The optimal short-end injection CGE was applied to detect the F8 gene of HA patients and carriers within 5 min. Intron 22 inversion was indeed found on some HA patients (13/35, 37.1 %). All genotyping results showed good agreement with DNA sequencing method and long-distance polymerase chain reaction (LD-PCR). The IS-PCR combined with short-end injection CGE method was feasible and efficient for intron 22 inversion screening of F8 in the HA populations.

Sleep deprivation alters pubertal timing in humans and rats: the role of the gut microbiome.

STUDY OBJECTIVES: Evidence implied that sleeping duration is associated with the timing of puberty and that sleep deprivation triggers early pubertal onset in adolescents. Sleep deprivation can affect metabolic changes and gut microbiota composition. This study investigated the effects of sleep deprivation on pubertal onset and gut microbiota composition in animal models and a human cohort. METHODS: This study comprised 459 boys and 959 girls from the Taiwan Pubertal Longitudinal Study. Sleep duration was evaluated using the self-report Pittsburgh Sleep Quality Index questionnaire. Early sexual maturation was defined by pediatric endocrinologist assessments. Mediation analyses were done to examine the association between sleep parameters, obesity, and early sexual maturation. Besides, Sprague Dawley juvenile rats were exposed to 4 weeks of chronic sleep deprivation. Vaginal opening (VO) and preputial separation (PS) were observed every morning to determine pubertal onset in female and male rats. RESULTS: The sleep-deprived juvenile rats in the sleep-deprived-female (SDF) and sleep-deprived-male (SDM) groups experienced delayed VO (mean VO days: 33 days in control; 35 days in SDF; p-value < 0.05) and PS (mean PS days: 42 days in control; 45 days in SDM; p-value < 0.05), respectively. Relative to their non-sleep-deprived counterparts, the sleep-deprived juvenile rats exhibited lower body weight and body fat percentage. Significant differences in relative bacterial abundance at genus levels and decreased fecal short-chain-fatty-acid levels were identified in both the SDF and SDM groups. In the human cohort, insufficient sleep increased the risk of early sexual maturation, particularly in girls (OR, 1.44; 95% CI: 1.09 to 1.89; p-value < 0.01). Insufficient sleep also indirectly affected early sexual maturation in girls, with obesity serving as the mediator. CONCLUSIONS: Overall, sleep deprivation altered the timing of puberty in both animal and human models but in different directions. In the rat model, sleep deprivation delayed the pubertal onset in juvenile rats through gut dysbiosis and metabolic changes, leading to a low body weight and body fat percentage. In the human model, sleep deprivation led to fat accumulation, causing obesity in girls, which increased the risk of early puberty.

Comprehensive performance evaluation of ligand-binding assay-LC-MS/MS method for co-dosed monoclonal anti-SARS-CoV-2 antibodies (AZD7442).

Aims: AZD7442 is a combination SARS-CoV-2 therapy comprising two co-dosed monoclonal antibodies. Materials & methods: The authors validated a hybrid ligand-binding assay-LC-MS/MS method for pharmacokinetic assessment of AZD7442 in human serum with nominal concentration range of each analyte of 0.300-30.0 µg/ml. Results: Validation results met current regulatory acceptance criteria. The validated method supported three clinical trials that spanned more than 17 months and ≥720 analytical runs (∼30,000 samples and ∼3000 incurred sample reanalyses per analyte). The data generated supported multiple health authority interactions, across the globe. AZD7442 (EVUSHELD) was approved in 12 countries for pre-exposure prophylaxis of COVID-19. Conclusion: The results reported here demonstrate the robust, high-throughput capability of the hybrid ligand-binding assay-LC-MS/MS approach being employed to support-next generation versions of EVUSHELD, AZD3152.

The measurement of antibodies in human body fluids (e.g., blood, serum) has historically been tied to laboratory tests that may face operational limitations, including susceptibility to interference from other blood components and a reliance on unique reagents that can take months to produce. As such, there is a pursuit of alternative analytical methods to more accurately detect and measure antibody drugs from complex matrices. In the method, the authors describe different techniques that once combined were used to capture, separate, filter, fragment and then detect and measure the co-dosed antibody drugs. This method has been validated in accordance with current health authority guidelines and has been used to support three clinical trials that spanned more than 17 months; that is, the validated method was used to analyze nearly 30,000 serum samples from more than 2000 patients. Collectively, the results reported here demonstrate the robustness and high-throughput capability of this analytical approach.

Analysis of anabolic androgenic steroids in urine by full-capillary sample injection combined with a sweeping CE stacking method.

This study describes an on-line stacking CE approach by sweeping with whole capillary sample filling for analyzing five anabolic androgenic steroids in urine samples. The five anabolic steroids for detection were androstenedione, testosterone, epitestosterone, boldenone, and clostebol. Anabolic androgenic steroids are abused in sport doping because they can promote muscle growth. Therefore, a sensitive detection method is imperatively required for monitoring the urine samples of athletes. In this research, an interesting and reliable stacking capillary electrophoresis method was established for analysis of anabolic steroids in urine. After liquid-liquid extraction by n-hexane, the supernatant was dried and reconstituted with 30 mM phosphate buffer (pH 5.00) and loaded into the capillary by hydrodynamic injection (10 psi, 99.9 s). The stacking and separation were simultaneously accomplished at -20 kV in phosphate buffer (30 mM, pH 5.0) containing 100 mM sodium dodecyl sulfate and 40 % methanol. During the method validation, calibration curves were linear (r≥0.990) over a range of 50-1,000 ng/mL for the five analytes. In the evaluation of precision and accuracy for this method, the absolute values of the RSD and the RE in the intra-day (n=3) and inter-day (n=5) analyses were all less than 6.6 %. The limit of detection for the five analytes was 30 ng/mL (S/N=5, sampling 99.9 s at 10 psi). Compared with simple MECK, this stacking method possessed a 108- to 175-fold increase in sensitivity. This simple and sensitive stacking method could be used as a powerful tool for monitoring the illegal use of doping.

Analysis of carbamazepine and its five metabolites in serum by large-volume sample stacking-sweeping capillary electrophoresis.

This study establishes a method, using different buffer conductivities and large-volume sample stacking (LVSS)-sweeping capillary electrophoresis, for analysis of carbamazepine (CBZ) and its five metabolites in serum. The capillary (50/60 cm) was filled with a high concentration of background electrolyte (150 mM phosphate, pH 3.5, containing 15 % methanol), followed by a large volume of samples (10 psi, 20 s) with low-concentration buffers (5 mM phosphate, pH 3.5, with 5 % methanol). When high voltage was applied (-20 kV), the sodium dodecyl sulfate (SDS) started to sweep the analytes to an outlet. Meanwhile, the analytes decelerated at the boundary between low- and high-conductivity buffers. Finally, a narrow sample zone was formed. The procedure of sweeping and separation was simultaneously carried out by a sweeping buffer (150 mM phosphate, pH 3.5) with 15% methanol and 50 mM SDS added, and the detection was performed by UV at 214 nm. The method was validated for linearity (r >/= 0.997), precision, and accuracy. The calibration curves were established for CBZ and its five metabolites between 0.03-25 and 0.03-3 µg/mL. The limits of detection (S/N = 3) were 0.01 µg/mL for each analyte. Compared with simple MEKC (0.5 psi, 5 s), this system can improve the sensitivity about 300-fold. Finally, this method was successfully applied to five patients, who had taken 200 mg CBZ daily, and CBZ levels were found to be from 3.72 to 5.82 µg/mL.

One Single Tube Reaction of Aptasensor-Based Magnetic Sensing System for Selective Fluorescent Detection of VEGF in Plasma.

In this study, a simple, easy and convenient fluorescent sensing system for the detection of the vascular endothelial growth factor (VEGF) based on VEGF aptamers, aptamer-complementary fluorescence-labeled probe and streptavidin magnetic beads was developed in one single tube. The VEGF is the most important biomarker in cancer, and it is investigated that the serum VEGF level varied according to the different types and courses of cancers. Hence, efficient quantification of VEGF is able to improve the accuracy of cancer diagnoses and the precision of disease surveillance. In this research, the VEGF aptamer was designed to be able to bind with the VEGF by forming G-quadruplex secondary structures; then, the magnetic beads would capture the non-binding aptamers due to non-steric interference; and finally, the fluorescence-labeled probes were hybridized with the aptamers captured by the magnetic beads. Therefore, the fluorescent intensity in the supernatant would specifically reflect the present VEGF. After an overall optimization, the optimal conditions for the detection of VEGF were as followed, KCl, 50 µM; pH 7.0; aptamer, 0.1 µM; and magnetic beads, 10 µL (4 µg/µL). The VEGF could be well quantified within a range of 0.2-2.0 ng/mL in plasma, and the calibration curve possessed a good linearity (y = 1.0391x + 0.5471, r = 0.998). The detection limit (LOD) was calculated to be 0.0445 ng/mL according to the formula (LOD = 3.3 × σ/S). The specificity of this method was also investigated under the appearance of many other serum proteins, and the data showed good specificity in this aptasensor-based magnetic sensing system. This strategy provided a simple, sensitive and selective biosensing platform for the detection of serum VEGF. Finally, it was expected that this detection technique can be used to promote more clinical applications.

Large volume sample stacking with EOF and sweeping in CE for determination of common preservatives in cosmetic products by chemometric experimental design.

This study proposes a capillary electrophoresis method incorporating large volume sample stacking, EOF and sweeping for detection of common preservatives used in cosmetic products. The method was developed using chemometric experimental design (fractional factorial design and central composite design) to determine multiple separation variables by efficient steps. The samples were loaded by hydrodynamic injection (10 psi, 90 s), and separated by phosphate buffer (50 mM, pH 3) containing 30% methanol and 80 mM SDS at -20 kV. During method validation, calibration curves were found to be linear over a range of 5-100 µg/mL for butyl paraben and isobutyl paraben; 0.05-10 µg/mL for ethyl paraben; 0.2-50 µg/mL for dehydroacetic acid; 0.5-70 µg/mL for methyl paraben; 5-350 µg/mL for sorbic acid; 0.02-450 µg/mL for p-hydroxybenzoic acid and 0.05-10 µg/mL for salicylic acid and benzoic acid. The analytes were analysed simultaneously and their detection limits (S/N = 3) were down to 0.005-2 µg/mL. The analysis method was successfully used for detection of preservatives used in commercial cosmetics.

Ablation of tumor progression locus 2 promotes a type 2 Th cell response in Ovalbumin-immunized mice.

The protein kinase encoded by the Tpl2 proto-oncogene regulates ERK activation and cytokine gene expression in macrophages in response to LPS and TNF-alpha. In this study we show that OVA-immunized Tpl2(-/-) mice express high levels of IgE and develop more severe bronchoalveolar eosinophilic inflammation than Tpl2(+/+) controls, when challenged with OVA intranasally. Bronchoalveolar exudates and supernatants of OVA-stimulated splenocytes from immunized Tpl2(-/-) mice express elevated levels of IL-4 and IL-5, suggesting that Tpl2 ablation promotes the Th2 polarization of the T cell response. Anti-CD3 stimulation of CD4(+) T cells of wild-type and Tpl2 knockout mice revealed that Tpl2 ablation gives rise to a cell autonomous T cell defect that is primarily responsible for the Th2 polarization of the T cell response to Ag. This observation was further supported by experiments addressing the expression of Th1 and Th2 cytokines in OVA-stimulated mixed cultures of CD4(+) T cells from Tpl2(+/+)/OT2 or Tpl2(-/-)/OT2 mice and dendritic cells from Tpl2(+/+) or Tpl2(-/-) mice. Further studies revealed that Th1 cells express significantly higher levels of Tpl2 than Th2 cells. As a result, Tpl2(-/-) Th1 cells exhibit a stronger defect in ERK activation by anti-CD3 than Th2 cells and express low levels of T-bet. Given that the development of Th1 and Th2 cells depends on positive feedback signals from the T cells, themselves, the functional defect of the Tpl2(-/-) Th1 cells provides a mechanistic explanation for the T cell autonomous Th2 polarization in Tpl2(-/-) mice.

Identifiable universal fluorescent multiplex PCR equipped with capillary electrophoresis for genotyping of exons 1 to 5 in human red and green pigment genes.

Congenital red and green color blindness is the most X-linked recessive disorder in humans caused by deletions or gross structural rearrangements of the visual pigment gene array that lead to altered the functions of visual pigments in their retina differ from normal. The incidence is about 7-10% in male and close association of X-linked recessive disorders (such as: hemophilia A, hemophilia B, duchenne muscular dystrophy). However, the traditional genetic analysis methods are time-consuming and low-efficiencies. Therefore, the purpose of the study is to develop a rapid method for genotyping of red and green pigment genes. We describe herein the first method for simultaneous evaluation of ten exons in the red and green pigment genes for genetic analysis. A forward specific primers with identifiable universal fluorescent multiplex PCR (FSIUFM-PCR) method utilized one universal primer (containing two universal non-human sequences) and forward specific primers in the multiplex PCR reaction system for simultaneously fluorescent labeling of eleven gene fragments (ten exons in red and green pigment genes and one internal standard). All the PCR products were analyzed on capillary electrophoresis with short-end injection, which had the advantage of high resolution and rapid separation. Of all 80 detected individuals, 7 subjects with color vision deficiencies (including 3 subjects only had red exons 1-5, 4 subjects had a specific red-green or green-red hybrid gene and 73 subjects with normal color vision). All genotyping results showed good agreement with DNA sequencing data. This method provided a better potential technique for genotyping and identifying of red and green pigment genes. In addition, FSIUFM-PCR method will be useful in many fields, such as diagnosis of diseases, analysis of polymorphisms and quantitative assay.

A chemometric experimental design with three-step stacking capillary electrophoresis for analysis of five tobacco-specific nitrosamines in cigarette products.

Tobacco-specific nitrosamines (TSNAs) as carcinogens endanger our health and life from cigarette products. However, the safe range of TSNAs levels in commercial cigarette products has not yet been established. For the purpose of safety and supervision, a three-step stacking approach including field amplified sample injection (FASI), sweeping, and analyte focusing by micelle collapse (AFMC), was developed for the simultaneous determination of five TSNAs levels in cigarette products. This approach also involved aspects of chemometric experimental design, including fractional factorial design and central composite design. After the multilevel optimization of the experimental design, the five TSNAs were well separated. The LOD (S/N = 3) values of the N´-nitrosonornicotine (NNN), N´-nitrosoanatabine (NAT), N´-nitrosoanabasine (NAB), 4-(methylnitrosamino)-1-(3-pyridyl)-1-butanol (NNAL), and 4-(methylnitrosamino)-1-(3-pyridyl)-1-butanone (NNK) in the FASI-sweeping-AFMC CE approach were 1.000 ng/mL, 0.500 ng/mL, 0.125 ng/mL, 1.000 ng/mL, and 0.500 ng/mL respectively. The results of relative standard deviation (RSD) and relative error (RE) were all less than 3.35%, demonstrating good precision and accuracy. Finally, this novel approach was further applied to monitor three commercial cigarette products, and a range of 250.1-336.6 ng/g for NNN, 481.6-526.7 ng/g for NAT, 82.2-247.6 ng/g for NAB, 167.7-473.7 ng/g for NNAL, and 39.4-246.7 ng/g for NNK could be observed among these. Based on these results, the novel CE stacking strategy was successfully applied for the analysis of five TSNAs levels in cigarette products and could serve as a tool for assays of quality control of nitrosamines.

A three-step stacking capillary electrophoresis of field-amplified sample injection, sweeping, and micellar collapse for determination of dabigatran and its active metabolite in human plasma.

A three-step stacking capillary electrophoresis (CE) composed of field-amplified sample injection, sweeping, and analyte focusing by micellar collapse (FASI-sweeping-AFMC) was developed to determine dabigatran (D) and its major active metabolite, dabigatran acyl-beta-d-glucuronide (DAG), in human plasma. After optimization and validation, this novel approach was further applied to monitor 5 real samples, and the 25.2-186.8 ng mL-1 D could be observed among those. Based on these results, the novel CE stacking strategy was successfully applied for the analysis of D and DAG in human plasma and could be served as a tool for clinical assays.

Stable Luminescent Poly(Allylaminehydrochloride)-Templated Copper Nanoclusters for Selectively Turn-Off Sensing of Deferasirox in ß-Thalassemia Plasma.

Highly stable and facile one-pot copper nanoclusters (Cu NCs) coated with poly(allylamine hydrochloride) (PAH) have been synthesized for selectively sensing deferasirox (DFX) in ß-thalassemia plasma. DFX is an important drug used for treating iron overloading in ß-thalassemia, but needs to be monitored due to certain toxicity. In this study, the PAH-Cu NCs showed highly stable fluorescence with emission wavelengths at 450 nm. The DFX specifically interacted with the copper nanocluster to turn off the fluorescence of the PAH-Cu NCs, and could be selectively quantified through the fluorescence quenching effect. The linear range of DFX in plasma analyzed by PAH-Cu NCs was 1.0-100.0 µg/mL (r = 0.985). The relative standard deviation (RSD) and relative error (RE) were lower than 6.51% and 7.57%, respectively, showing excellent reproducibility of PAH-Cu NCs for sensing DFX in plasma. This method was also successfully applied for an analysis of three clinical plasma samples from ß-thalassemia patients taking DFX. The data presented high similarity with that obtained through a capillary electrophoresis method. According to the results, the PAH-Cu NCs could be used as a tool for clinically sensing DFX in human plasma for clinical surveys.