Advances and Challenges in Electrolyte Development for Magnesium-Sulfur Batteries: A Comprehensive Review.

Magnesium-sulfur batteries are an emerging technology. With their elevated theoretical energy density, enhanced safety, and cost-efficiency, they have the ability to transform the energy storage market. This review investigates the obstacles and progress made in the field of electrolytes which are especially designed for magnesium-sulfur batteries. The primary focus of the review lies in identifying electrolytes that can facilitate the reversible electroplating and stripping of Mg2+ ions whilst maintaining compatibility with sulfur cathodes and other battery components. The review also addresses the critical issue of managing the shuttle effect on soluble magnesium polysulfide by looking at the innovative engineering methods used at the sulfur cathode's interface and in the microstructure design, both of which can enhance the reaction kinetics and overall battery efficiency. This review emphasizes the significance of reaction mechanism analysis from the recent studies on magnesium-sulfur batteries. Through analysis of the insights proposed in the latest literature, this review identifies the gaps in the current research and suggests future directions which can enhance the electrochemical performance of Mg-S batteries. Our analysis highlights the importance of innovative electrolyte solutions and provides a deeper understanding of the reaction mechanisms in order to overcome the existing barriers and pave the way for the practical application of Mg-S battery technology.

Subsurface Single-atom Catalyst Enabled by Mechanochemical Synthesis for Oxidation Chemistry.

Single-atom catalysts have garnered significant attention due to their exceptional atom utilization and unique properties. However, the practical application of these catalysts is often impeded by challenges such as sintering-induced instability and poisoning of isolated atoms due to strong gas adsorption. In this study, we employed the mechanochemical method to insert single Cu atoms into the subsurface of Fe2O3 support. By manipulating the location of single atoms at the surface or subsurface, catalysts with distinct adsorption properties and reaction mechanisms can be achieved. It was observed that the subsurface Cu single atoms in Fe2O3 remained isolated under both oxidation and reduction environments, whereas surface Cu single atoms on Fe2O3 experienced sintering under reduction conditions. The unique properties of these subsurface single-atom catalysts call for innovations and new understandings in catalyst design.

Promoting Molecular Exchange on Rare-Earth Oxycarbonate Surfaces to Catalyze the Water-Gas Shift Reaction.

It is highly desirable to fabricate an accessible catalyst surface that can efficiently activate reactants and desorb products to promote the local surface reaction equilibrium in heterogeneous catalysis. Herein, rare-earth oxycarbonates (Ln2O2CO3, where Ln = La and Sm), which have molecular-exchangeable (H2O and CO2) surface structures according to the ordered layered arrangement of Ln2O22+ and CO32- ions, are unearthed. On this basis, a series of Ln2O2CO3-supported Cu catalysts are prepared through the deposition precipitation method, which provides excellent catalytic activity and stability for the water-gas shift (WGS) reaction. Density functional theory calculations combined with systematic experimental characterizations verify that H2O spontaneously dissociates on the surface of Ln2O2CO3 to form hydroxyl by eliminating the carbonate through the release of CO2. This interchange efficiently promotes the WGS reaction equilibrium shift on the local surface and prevents the carbonate accumulation from hindering the active sites. The discovery of the unique layered structure provides a so-called "self-cleaning" active surface for the WGS reaction and opens new perspectives about the application of rare-earth oxycarbonate nanomaterials in C1 chemistry.

Effective Activation of Strong C-Cl Bonds for Highly Selective Photosynthesis of Bibenzyl via Homo-Coupling.

Carbon-carbon (C-C) coupling of organic halides has been successfully achieved in homogeneous catalysis, while the limitation, e.g., the dependence on rare noble metals, complexity of the metal-ligand catalylst and the poor catalyst stability and recyclability, needs to be tackled for a green process. The past few years have witnessed heterogeneous photocatalysis as a green and novel method for organic synthesis processes. However, the study on C-C coupling of chloride substrates is rare due to the extremely high bond energy of C-Cl bond (327 kJ mol-1 ). Here, we report a robust heterogeneous photocatalyst (Cu/ZnO) to drive the homo-coupling of benzyl chloride with high efficiency, which achieves an unprecedented high selectivity of bibenzyl (93 %) and yield rate of 92 % at room temperature. Moreover, this photocatalytic process has been validated for C-C coupling of 10 benzylic chlorides all with high yields. In addition, the excellent stability has been observed for 8 cycles of reactions. With detailed characterization and DFT calculation, the high selectivity is attributed to the enhanced adsorption of reactants, stabilization of intermediates (benzyl radicals) for the selective coupling by the Cu loading and the moderate oxidation ability of the ZnO support, besides the promoted charge separation and transfer by Cu species.

Surface Electron-Hole Rich Species Active in the Electrocatalytic Water Oxidation.

Iridium and ruthenium and their oxides/hydroxides are the best candidates for the oxygen evolution reaction under harsh acidic conditions owing to the low overpotentials observed for Ru- and Ir-based anodes and the high corrosion resistance of Ir-oxides. Herein, by means of cutting edge operando surface and bulk sensitive X-ray spectroscopy techniques, specifically designed electrode nanofabrication and ab initio DFT calculations, we were able to reveal the electronic structure of the active IrOx centers (i.e., oxidation state) during electrocatalytic oxidation of water in the surface and bulk of high-performance Ir-based catalysts. We found the oxygen evolution reaction is controlled by the formation of empty Ir 5d states in the surface ascribed to the formation of formally IrV species leading to the appearance of electron-deficient oxygen species bound to single iridium atoms (µ1-O and µ1-OH) that are responsible for water activation and oxidation. Oxygen bound to three iridium centers (µ3-O) remains the dominant species in the bulk but do not participate directly in the electrocatalytic reaction, suggesting bulk oxidation is limited. In addition a high coverage of a µ1-OO (peroxo) species during the OER is excluded. Moreover, we provide the first photoelectron spectroscopic evidence in bulk electrolyte that the higher surface-to-bulk ratio in thinner electrodes enhances the material usage involving the precipitation of a significant part of the electrode surface and near-surface active species.

Design, Identification, and Evolution of a Surface Ruthenium(II/III) Single Site for CO Activation.

RuII compounds are widely used in catalysis, photocatalysis, and medical applications. They are usually obtained in a reductive environment as molecular O2 can oxidize RuII to RuIII and RuIV . Here we report the design, identification and evolution of an air-stable surface [bipy-RuII (CO)2 Cl2 ] site that is covalently mounted onto a polyphenylene framework. Such a RuII site was obtained by reduction of [bipy-RuIII Cl4 ]- with simultaneous ligand exchange from Cl- to CO. This structural evolution was witnessed by a combination of in situ X-ray and infrared spectroscopy studies. The [bipy-RuII (CO)2 Cl2 ] site enables oxidation of CO with a turnover frequency of 0.73×10-2  s-1 at 462 K, while the RuIII site is completely inert. This work contributes to the study of structure-activity relationship by demonstrating a practical control over both geometric and electronic structures of single-site catalysts at molecular level.

The Electrophilicity of Surface Carbon Species in the Redox Reactions of CuO-CeO2 Catalysts.

Electronic metal-support interactions (EMSI) describe the electron flow between metal sites and a metal oxide support. It is generally used to follow the mechanism of redox reactions. In this study of CuO-CeO2 redox, an additional flow of electrons from metallic Cu to surface carbon species is observed via a combination of operando X-ray absorption spectroscopy, synchrotron X-ray powder diffraction, near ambient pressure near edge X-ray absorption fine structure spectroscopy, and diffuse reflectance infrared Fourier transform spectroscopy. An electronic metal-support-carbon interaction (EMSCI) is proposed to explain the reaction pathway of CO oxidation. The EMSCI provides a complete picture of the mass and electron flow, which will help predict and improve the catalytic performance in the selective activation of CO2 , carbonate, or carbonyl species in C1 chemistry.

Advanced Li2 S/Si Full Battery Enabled by TiN Polysulfide Immobilizer.

Lithium sulfide (Li2 S) is a promising cathode material with high capacity, which can be paired with nonlithium metal anodes such as silicon or tin so that the safety issues caused by the Li anode can be effectively avoided. However, the Li2 S full cell suffers from rapid capacity degradation due to the dissolution of intermediate polysulfides. Herein, a Li2 S/Si full cell is designed with a Li2 S cathode incorporated by titanium nitride (TiN) polysulfide immobilizer within parallel hollow carbon (PHC). This full cell delivers a high initial reversible capacity of 702 mAh gLi2S -1 (1007 mAh gsulfur -1 ) at 0.5 C rate and excellent cyclability with only 0.4% capacity fade per cycle over 200 cycles. The long cycle stability is ascribed to the strong polysulfide anchor effect of TiN and highly efficient electron/ion transport within the interconnected web-like architecture of PHC. Theoretical calculations, self-discharge measurements, and anode stability experiments further confirm the strong adsorption of polysulfides on the TiN surface. The present work demonstrates that the flexible Li2 S cathode and paired Si anode can be used to achieve highly efficient Li-S full cells.

Structure-Function Relationship of Highly Reactive CuOx Clusters on Co3 O4 for Selective Formaldehyde Sensing at Low Temperatures.

Designing reactive surface clusters at the nanoscale on metal-oxide supports enables selective molecular interactions in low-temperature catalysis and chemical sensing. Yet, finding effective material combinations and identifying the reactive site remains challenging and an obstacle for rational catalyst/sensor design. Here, the low-temperature oxidation of formaldehyde with CuOx clusters on Co3 O4 nanoparticles is demonstrated yielding an excellent sensor for this critical air pollutant. When fabricated by flame-aerosol technology, such CuOx clusters are finely dispersed, while some Cu ions are incorporated into the Co3 O4 lattice enhancing thermal stability. Importantly, infrared spectroscopy of adsorbed CO, near edge X-ray absorption fine structure spectroscopy and temperature-programmed reduction in H2 identified Cu+ and Cu2+ species in these clusters as active sites. Remarkably, the Cu+ surface concentration correlated with the apparent activation energy of formaldehyde oxidation (Spearman's coefficient ρ = 0.89) and sensor response (0.96), rendering it a performance descriptor. At optimal composition, such sensors detected even the lowest formaldehyde levels of 3 parts-per-billion (ppb) at 75°C, superior to state-of-the-art sensors. Also, selectivity to other aldehydes, ketones, alcohols, and inorganic compounds, robustness to humidity and stable performance over 4 weeks are achieved, rendering such sensors promising as gas detectors in health monitoring, air and food quality control.

Catalytic properties of trivalent rare-earth oxides with intrinsic surface oxygen vacancy.

Oxygen vacancy (Ov) is an anionic defect widely existed in metal oxide lattice, as exemplified by CeO2, TiO2, and ZnO. As Ov can modify the band structure of solid, it improves the physicochemical properties such as the semiconducting performance and catalytic behaviours. We report here a new type of Ov as an intrinsic part of a perfect crystalline surface. Such non-defect Ov stems from the irregular hexagonal sawtooth-shaped structure in the (111) plane of trivalent rare earth oxides (RE2O3). The materials with such intrinsic Ov structure exhibit excellent performance in ammonia decomposition reaction with surface Ru active sites. Extremely high H2 formation rate has been achieved at ~1 wt% of Ru loading over Sm2O3, Y2O3 and Gd2O3 surface, which is 1.5-20 times higher than reported values in the literature. The discovery of intrinsic Ov suggests great potentials of applying RE oxides in heterogeneous catalysis and surface chemistry.

Synergy of Ag and AgBr in a Pressurized Flow Reactor for Selective Photocatalytic Oxidative Coupling of Methane.

Oxidation of methane into valuable chemicals, such as C2+ molecules, has been long sought after but the dilemma between high yield and high selectivity of desired products remains. Herein, methane is upgraded through the photocatalytic oxidative coupling of methane (OCM) over a ternary Ag-AgBr/TiO2 catalyst in a pressurized flow reactor. The ethane yield of 35.4 µmol/h with a high C2+ selectivity of 79% has been obtained under 6 bar pressure. These are much better than most of the previous benchmark performance in photocatalytic OCM processes. These results are attributed to the synergy between Ag and AgBr, where Ag serves as an electron acceptor and promotes the charge transfer and AgBr forms a heterostructure with TiO2 not only to facilitate charge separation but also to avoid the overoxidation process. This work thus demonstrates an efficient strategy for photocatalytic methane conversion by both the rational design of the catalyst for the high selectivity and reactor engineering for the high conversion.

Cascade NH3 Oxidation and N2O Decomposition via Bifunctional Co and Cu Catalysts.

The selective catalytic oxidation of NH3 (NH3-SCO) to N2 is an important reaction for the treatment of diesel engine exhaust. Co3O4 has the highest activity among non-noble metals but suffers from N2O release. Such N2O emissions have recently been regulated due to having a 300× higher greenhouse gas effect than CO2. Here, we design CuO-supported Co3O4 as a cascade catalyst for the selective oxidation of NH3 to N2. The NH3-SCO reaction on CuO-Co3O4 follows a de-N2O pathway. Co3O4 activates gaseous oxygen to form N2O. The high redox property of the CuO-Co3O4 interface promotes the breaking of the N-O bond in N2O to form N2. The addition of CuO-Co3O4 to the Pt-Al2O3 catalyst reduces the full NH3 conversion temperature by 50 K and improves the N2 selectivity by 20%. These findings provide a promising strategy for reducing N2O emissions and will contribute to the rational design and development of non-noble metal catalysts.

Strain-promoted conductive metal-benzenhexathiolate frameworks for overall water splitting.

Designing efficient catalysts for hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) is a desirable strategy for overall water splitting and the generation of clean and renewable energies. Herein, the electrocatalytic HER and OER activity of the conductive metal-benzenhexathiolate (M-BHT) frameworks has been evaluated utilizing first-principles calculations. The in-plane π-d conjugation of M-BHT guarantees fast electron transfer during electrocatalytic reactions. Notably, Rh-BHT holds the promise of bifunctional HER/OER activity with the overpotentials of 0.07/0.36 V. Furthermore, the application of strain engineering tailors the adsorption of intermediates and promotes the overall water splitting performance. Rh-BHT with the +1% tensile strain shows the HER/OER overpotential of 0.02/0.37 V. This work not only demonstrates the prospects of conductive metal-organic frameworks in electrocatalysis but also offers new insights into designing efficient catalysts by strain engineering.

Versatile Preparation of Mesoporous Single-Layered Transition-Metal Sulfide/Carbon Composites for Enhanced Sodium Storage.

Transition-metal sulfides are promising electrochemical energy storage materials due to their abundant active sites, large interlayer space, and high theoretical capacities, especially for sodium storage. However, the low conductivity and poor cycling stability at high current densities hamper their applications. Herein, a versatile dual-template method is reported to elaborate ordered mesoporous single-layered MoS2 /carbon composite with high specific area, uniform pore size, and large pore volume. The single-layered MoS2 is confined in the carbon matrix. The mesopores between the composite nanorods provide fast electrolyte diffusion. The obtained nanocomposite shows a high sodium-storage capability, excellent rate capacity, and very good cycling performance. A capacity of 310 mAh g-1 can remain at 5.0 A g-1 after 2500 cycles. Furthermore, a sodium-ion battery (SIB) full cell composed of the MoS2 /carbon composite anode and a Na3 V2 (PO4 )3 (NVP) cathode maintains a specific capacity of 330 mAh g-1 at 1.0 A g-1 during 100 cycles. The mechanism is investigated by in situ and ex situ characterizations as well as density functional theory (DFT) calculations.

Catalytically efficient Ni-NiOx-Y2O3 interface for medium temperature water-gas shift reaction.

The metal-support interfaces between metals and oxide supports have long been studied in catalytic applications, thanks to their significance in structural stability and efficient catalytic activity. The metal-rare earth oxide interface is particularly interesting because these early transition cations have high electrophilicity, and therefore good binding strength with Lewis basic molecules, such as H2O. Based on this feature, here we design a highly efficient composite Ni-Y2O3 catalyst, which forms abundant active Ni-NiOx-Y2O3 interfaces under the water-gas shift (WGS) reaction condition, achieving 140.6 µmolCO gcat-1 s-1 rate at 300 °C, which is the highest activity for Ni-based catalysts. A combination of theory and ex/in situ experimental study suggests that Y2O3 helps H2O dissociation at the Ni-NiOx-Y2O3 interfaces, promoting this rate limiting step in the WGS reaction. Construction of such new interfacial structure for molecules activation holds great promise in many catalytic systems.

Designing Reactive Bridging O2- at the Atomic Cu-O-Fe Site for Selective NH3 Oxidation.

Surface oxidation chemistry involves the formation and breaking of metal-oxygen (M-O) bonds. Ideally, the M-O bonding strength determines the rate of oxygen absorption and dissociation. Here, we design reactive bridging O2- species within the atomic Cu-O-Fe site to accelerate such oxidation chemistry. Using in situ X-ray absorption spectroscopy at the O K-edge and density functional theory calculations, it is found that such bridging O2- has a lower antibonding orbital energy and thus weaker Cu-O/Fe-O strength. In selective NH3 oxidation, the weak Cu-O/Fe-O bond enables fast Cu redox for NH3 conversion and direct NO adsorption via Cu-O-NO to promote N-N coupling toward N2. As a result, 99% N2 selectivity at 100% conversion is achieved at 573 K, exceeding most of the reported results. This result suggests the importance to design, determine, and utilize the unique features of bridging O2- in catalysis.

A Multiscale X-Ray Tomography Study of the Cycled-Induced Degradation in Magnesium-Sulfur Batteries.

Rechargeable Mg/S batteries have the potential to provide a compelling battery for a range of applications owing to their high capacity and gravimetric energy density, safety, and low-cost construction. However, the Mg/S energy storage is not widely developed and deployed due to technical challenges, which include short cycle lifespan and lack of suitable electrolyte. To study the microstructure degradation of Mg/S batteries, multiscale X-ray tomography, an inherently nondestructive method, is performed on dismantled Swagelok Mg/S cells comprising a graphene-sulfur cathode and a super-P separator. For the first time, 3D microstructure visualization and quantification reveal the dissolution (volume fraction decreases from 13.5% to 0.7%, surface area reduces from 2.91 to 1.74 µm2 µm-3 ) and agglomeration of sulfur particles, and the carbon binder densification after 10 cycles. Using tomography data, the image-based simulations are then performed. The results show that the insoluble polysulfides can inevitably block the Mg2+ transportation via shuttle effect. The representative volume should exceed 8200 µm3 to represent bulk cathode. This work elucidates that the Mg/S cell performance is significantly affected by microstructural degradation, and moreover demonstrates how multiscale and multimodal characterization can play an indispensable role in developing and optimizing the Mg/S electrode design.

Polyphenylene as an Active Support for Ru-Catalyzed Hydrogenolysis of 5-Hydroxymethylfurfural.

Selective transformation of biomass feedstocks to platform molecules is a key pursuit for sustainable chemical production. Compared to petrochemical processes, biomass transformation requires the defunctionalization of highly polar molecules at relatively low temperatures. As a result, catalysts based on functional organic polymers may play a prominent role. Targeting the hydrogenolysis of the platform chemical 5-hydroxymethylfurfural (5-HMF), here, we design a polyphenylene (PPhen) framework with purely sp2-hybridized carbons that can isolate 5-HMF via π-π stacking, preventing hemiacetal and humin formation. With good swellability, the PPhen framework here has successfully supported and dispersed seven types of metal particles via a newly developed swelling-impregnation method, including Ru, Pt, Au, Fe, Co, Ni, and Cu. Ru/PPhen is studied for 5-HMF hydrogenolysis, achieving a 92% yield of 2,5-dimethylfuran (DMF) under mild conditions, outperforming the state-of-the-art catalysts reported in the literature. In addition, PPhen helps perform a solventless reaction, achieving direct 5-HMF to DMF conversion in the absence of any liquid solvent or reagent. This approach in designing support-reactant/solvent/metal interactions will play an important role in surface catalysis.

Polyphenylene-Based Solid Acid as an Efficient Catalyst for Activation and Hydration of Alkynes.

Porous polymer catalysts possess the potential to combine the advantages of heterogeneous and homogeneous catalysis, namely, easy postreaction recycling and high dispersion of active sites. Here, we designed a -SO3H functionalized polyphenylene (PPhen) framework with purely sp2-hybridized carbons, which exhibited high activity in the hydration of alkynes including challenging aliphatic substrates such as 1-octyne. The superiority of the structure lies in its covalent crosslink in the xy-plane with a π-π stacking interaction between the planes, enabling simultaneously high swellability and porosity (653 m2·g-1). High acidic site density (2.12 mmol·g-1) was achieved under a mild sulfonation condition. Similar turnover frequencies (0.015 ± 0.001 min-1) were obtained regardless of acidic density and crosslink content, suggesting high accessibility for all active sites over PPhen. In addition, the substituted benzene groups can activate alkynes through a T-shape CH/π interaction, as indicated by the 8 and 16 cm-1 red shift of the alkyne C-H stretching peak for phenylacetylene and 1-octyne, respectively, in the infrared (IR) spectra. These advantages render PPhen-SO3H a promising candidate as a solid catalyst replacing the highly toxic liquid phase acids such as the mercury salt.

Adsorption and activation of molecular oxygen over atomic copper(I/II) site on ceria.

Supported atomic metal sites have discrete molecular orbitals. Precise control over the energies of these sites is key to achieving novel reaction pathways with superior selectivity. Here, we achieve selective oxygen (O2) activation by utilising a framework of cerium (Ce) cations to reduce the energy of 3d orbitals of isolated copper (Cu) sites. Operando X-ray absorption spectroscopy, electron paramagnetic resonance and density-functional theory simulations are used to demonstrate that a [Cu(I)O2]3- site selectively adsorbs molecular O2, forming a rarely reported electrophilic η2-O2 species at 298 K. Assisted by neighbouring Ce(III) cations, η2-O2 is finally reduced to two O2-, that create two Cu-O-Ce oxo-bridges at 453 K. The isolated Cu(I)/(II) sites are ten times more active in CO oxidation than CuO clusters, showing a turnover frequency of 0.028 ± 0.003 s-1 at 373 K and 0.01 bar PCO. The unique electronic structure of [Cu(I)O2]3- site suggests its potential in selective oxidation.