Removal of methylene blue from aqueous solution using sediment obtained from a canal in an industrial park.

Drainage canal sediments in an industrial park are generally dredged to landfill in Taiwan. The objective of this study was to evaluate feasibility employing the sediment as an adsorbent for removal of dye. The sediment contained approximately 10% of organic matter and little heavy metals. Infrared (IR) analysis revealed that carboxyl was the most important functional group for methylene blue (MB) sorption. Canal sediment could remove the most MB from water at pH 8.0 and this removal increased with increasing temperature. The MB sorption was well described by the Langmuir, Dubinin-Radushkevich, and Temkin sorption isotherms at 10°C, but it showed good compliance with Freundlich isotherm at 25°C and 40°C. The MB adsorption was a spontaneous and endothermic reaction; its maximum calculated adsorption capacity (Qm) was 56.0 mg g-1 at 10°C by the Langmuir isotherm. The calculated values of enthalpy (ΔH°) and entropy (ΔS°) are 14.6 kJ mol-1 and 149.2 kJ mol-1, respectively. Only pseudo-second-order adsorption kinetic model successfully described the kinetics of MB onto the sediment at different operation parameters. Activation energy of MB adsorption calculated from Arrhenius equation was 16.434 kJ mol-1, indicating the binding between canal sediment and MB was a physical adsorption.

Bacillus praedii sp. nov., isolated from purplish paddy soil.

A Gram-stain-positive, rod-shaped, endospore-forming, aerobic bacterium, designated strain FJAT-25547T, was isolated from the purplish paddy soil collected from Linshan Township, Yanting Prefecture of Sichuan Province in PR China (31° 16' N 105° 27' E). Growth was achieved aerobically at temperatures between 15 and 40 °C (optimum 30 °C), with between 0 and 10.0 % NaCl (w/v) (optimum 4 %) and in the range of pH 5.0-12.0 (optimum pH 9.0). The cell-wall peptidoglycan contained meso-diaminopimelic acid, and the main isoprenoid quinone was MK-7. The major fatty acids were iso-C15 : 0 (55.4 %), anteiso-C15 : 0 (22.2 %), iso-C16 : 0 (5.1 %) and iso-C14 : 0 (6.5 %). The main polar lipids were diphosphatidylglycerol, phosphatidylglycerol and phosphatidylethanolamine. Phylogenetic analyses based on 16S rRNA gene sequences showed that strain FJAT-25547T was a member of the genus Bacillus and was most closely related to Bacillus horneckiae DSM 23495T (97.7 % similarity), Bacillus eiseniae A1-2T (97.5 %), Bacillus mesophilum IITR-54T (97.2 %) and Bacillus kochii WCC 4582T (97.0 %). The average nucleotide identity value between strain FJAT-25547T and the type strain of the most closely related species, B. horneckiae DSM 23495T, was 77.7 %, less than the proposed cut-off value of 96.0 % for differentiating species within the genus. The in silico DNA-DNA hybridization value of strain FJAT-25547T with the most closely related species was 22.7 %, <70 %, again indicating they belong to different taxa. The DNA G+C content of strain FJAT-25547T was 39.1 mol%. This taxono-genomics study revealed that strain FJAT-25547T represents a novel species of the genus Bacillus for which the name Bacillus praedii sp. nov. (type strain FJAT-25547T=CCTCC AB 2015208T=DSM 101002T) is proposed.

Numerical simulation of flow hydrodynamics of struvite pellets in a liquid-solid fluidized bed.

Phosphorus recovery in the form of struvite has been aroused in recent decades for its dual advantages in eutrophication control and resource protection. The usage of the struvite products is normally determined by the size which is largely depended on the hydrodynamics. In this study, flow behavior of struvite pellets was simulated by means of Eulerian-Eulerian two-fluid model combining with kinetic theory of granular flow in a liquid-solid fluidized bed reactor (FBR). A parametric study including the mesh size, time step, discretization strategy, turbulent model and drag model was first developed, followed by the evaluations of crucial operational conditions, particle characteristics and reactor shapes. The results showed that a cold model with the mesh resolution of 16×240, default time step of 0.001sec and first order discretization scheme was accurate enough to describe the fluidization. The struvite holdup profile using Syamlal-O'Brien drag model was best fitted to the experimental data as compared with other drag models and the empirical Richardson-Zaki equation. Regarding the model evaluation, it showed that liquid velocity and particle size played important roles on both solid holdups and velocities. The reactor diameter only influenced the solid velocity while the static bed height almost took no effect. These results are direct and can be applied to guide the operation and process control of the struvite fluidization. Moreover, the model parameters can also be used as the basic settings in further crystallization simulations.

Bacillus taiwanensis sp. nov., isolated from a soil sample from Taiwan.

A Gram-stain-positive, rod-shaped, endospore-forming, aerobic bacterium (FJAT-14571(T)) was isolated from a soil sample in Taiwan. Strain FJAT-14571(T) grew at 20-40 °C (optimum 35 °C), pH 6-10 (optimum pH 8) and 0-2% (w/v) NaCl (optimum 0%). Phylogenetic analyses based on 16S rRNA gene sequences showed that strain FJAT-14571(T) was a member of the genus Bacillus and was most closely related to Bacillus oceanisediminis DSM 24771(T) (96.2%). DNA-DNA relatedness between strain FJAT-14571(T) and B. oceanisediminis DSM 24771(T) was low (32.0% ± 0.88%). The diagnostic diamino acid of the peptidoglycan of strain FJAT-14571(T) was meso-diaminopimelic acid and the predominant menaquinone was MK-7 (96.6%). The major cellular fatty acids were iso-C15 : 0 (46.4%), anteiso-C15 : 0 (7.6%), iso-C17 : 0 (8.2%) and iso-C16 : 0 (10.0 %) and the DNA G+C content was 40.8 mol%. Phenotypic, chemotaxonomic and genotypic properties clearly indicated that strain FJAT-14571(T) represents a novel species within the genus Bacillus, for which the name Bacillus taiwanensis sp. nov. is proposed. The type strain is FJAT-14571(T) ( = DSM 27845(T) = CGMCC1.1 2698(T)).

Mechanism of Arsenic Adsorption on Magnetite Nanoparticles from Water: Thermodynamic and Spectroscopic Studies.

Removal of arsenic (As) from water supplies is needed to reduce As exposure through drinking water and food consumption in many regions of the world. Magnetite nanoparticles (MNPs) are promising and novel adsorbents for As removal because of their great adsorption capacity for As and easy separation. This study aimed to investigate the adsorption mechanism of arsenate, As(V), and arsenite, As(III), on MNPs by macroscopic adsorption experiments in combination with thermodynamic calculation and microspectroscopic characterization using synchrotron-radiation-based X-ray absorption spectroscopy (XAS) and X-ray photoelectron spectroscopy (XPS). Adsorption reactions are favorable endothermic processes as evidenced by increased adsorption with increasing temperatures, and high positive enthalpy change. EXAFS spectra suggested predominant formation of bidentate binuclear corner-sharing complexes ((2)C) for As(V), and tridentate hexanuclear corner-sharing ((3)C) complexes for As(III) on MNP surfaces. The macroscopic and microscopic data conclusively identified the formation of inner-sphere complexes between As and MNP surfaces. More intriguingly, XANES and XPS results revealed complex redox transformation of the adsorbed As on MNPs exposed to air: Concomitant with the oxidation of MNPs, the oxidation of As(III) and MNPs was expected, but the observed As(V) reduction was surprising because of the role played by the reactive Fe(II).

Kinetic and thermodynamic studies on removal of Cu(II) from aqueous solutions using soil nanoclays.

Soil clays (< 2,000 nm) (SC) and soil nanoclays (< 100 nm) (SNC) were used as adsorbents for removal of Cu(II) from aqueous solution. The experiments were conducted with variables including pH, interaction time, concentration of Cu(II) and temperature. Four kinetic models have been employed to investigate adsorption mechanisms, and the experimental data more closely resemble a second-order process of the kinetic model. Adsorption studies on soil nanoclays have been shown to be highly effective in removing of Cu(II) from aqueous solution. This adsorbent is widely available as a natural material, is mechanically stable and, most importantly, it is environmentally appealing. The maximum Cu(II) adsorption capacity of soil nanoclays (31.7 mg/g) is more than three times higher than natural soil clays (10.2 mg/g). Our study demonstrates that soil nanoclays can be used effectively for removal of Cu(II) from aqueous systems to achieve environmental cleaning purposes.

Bacillus cihuensis sp. nov., isolated from rhizosphere soil of a plant in the Cihu area of Taiwan.

A Gram-positive, moderately halotolerant, rod-shaped, spore forming bacterium, designated strain FJAT-14515(T) was isolated from a soil sample in Cihu area, Taoyuan County, Taiwan. The strain grew at 10-35 °C (optimum at 30 °C), pH 5.7-9.0 (optimum at pH 7.0) and at salinities of 0-5 % (w/v) NaCl (optimum at 1 % w/v). The diagnostic diamino acid of the peptidoglycan of the isolated strain was meso-diaminopimelic acid and major respiratory isoprenoid quinone was MK-7. Major cellular fatty acids were anteiso-C15:0 (40.6 %), iso-C15:0 (20.7 %) and the DNA G+C content of strain FJAT-14515(T) was 37.1 mol %. A phylogenetic analysis based on 16S rRNA gene sequences indicated that strain FJAT-14515(T) belongs to the genus Bacillus, and was most closely related to the reference strains of Bacillus muralis DSM 16288(T) (97.6 %) and Bacillus simplex DSM 1321(T) (97.5 %). Levels of DNA-DNA relatedness between strain FJAT-14515(T) and the reference strains of B. muralis DSM 16288(T) and B. simplex DSM 1321(T) were 27.9 % ± 3.32 and 44.1 % ± 0.57, respectively. Therefore, on the basis of phenotypic, chemotaxonomic and genotypic properties, strain FJAT-14515(T) represents a novel species of the genus Bacillus, for which the name Bacillus cihuensis sp. nov. is proposed. The type strain is FJAT-14515(T) (=DSM 25969(T) = CGMCC 1.12697(T)).

Biogeochemical reductive release of soil embedded arsenate around a crater area (Guandu) in northern Taiwan using X-ray absorption near-edge spectroscopy.

This study investigates biogeochemical reductive release of arsenate from beudantite into solution in a crater area in northern Taiwan, using a combination of X-ray absorption near-edge structure (XANES) and atomic absorption spectrometry. Total arsenic (As) concentrations in the soil were more than 200 mg/kg. Over four months of laboratory experiments, less than 0.8% As was released into solution after reduction experiments. The 71% to 83% As was chemically reduced into arsenite (As(III)) and partially weathering into the soluble phase. The kinetic dissolution and re-precipitation of As, Fe, Pb and sulfate in this area of paddy soils merits further study.

Impact of soil surface properties on soil swelling of different soil layers in collapsing wall of Benggang.

Benggang is one of the most serious soil erosion problems in tropical and subtropical areas in southern China. Little work has been reported on the surface properties of soil colloidal particle and its influence on soil swelling of different soil layers in collapsing wall of Benggang. In this present work, the effects of sodium concentration on soil swelling, and the correlations between soil swelling rates and soil colloidal surface properties were comprehensively evaluated by carefully examining soil physicochemical properties and soil colloidal surface properties of red, sandy and detritus soil layers from a collapsing wall. Our results showed that the soil swelling rates of red, sandy and detritus soil layers all exponentially decreased with increasing initial water contents. The relationship between soil swelling rate and the thickness of shear plane showed an extremely significant negative correlation for red soil layer and no correlation for sandy and detritus soil layers. Moreover, the elevating sodium concentrations reduced the thickness of shear plane from 39.69 to 0.76 nm for red soil layer, followed from 22.56 to 0.79 nm for sandy soil layer and from 18.61 to 0.64 nm for detritus soil layer. These findings indicated that the soil particle interactions played a crucial role in the development and occurrence of Benggang. This work will be helpful in understanding the mechanisms of soil mass loss on the gully head and collapsing wall of Benggang.

Adsorption of Cu(II) from aqueous solution by wine processing waste sludge.

Wine processing waste sludge (WPWS) has been shown to be an effective sorbent for sorption of nickel, lead, and chromium, but the sorption of copper (Cu) in aqueous solution by WPWS has not been conducted. The objective of this study was to explore the sorption mechanism of WPWS for copper. Infrared analysis revealed carboxyl was the major functional group in WPWS. The WPWS sorption isotherms of copper were only well described by Langmuir sorption isotherm. The maximum adsorption capacity (Qm) was 14.26 mg/g at 50 degrees C. A pseudo-second-order sorption kinetic model successfully described the kinetics of copper sorption onto WPWS. The Gibb free energies (deltaG0) ranged from -20.69 to -24.29 kJ mol(-1), and the deltaH0 and deltaS0 were 5.048 kJ mol(-1) and 91.05 J mol(-1) K(-1), respectively. The trend of the intra-particular diffusion rate is the opposite of the adsorption constant of the pseudo-second-order equation.

Removal of methylene blue from aqueous solution using wine-processing waste sludge.

Dye wastewaters usually contain toxins and high chroma, making them difficult to treat with biological methods. The adsorption process plays an important role in removing dyes from wastewaters. This study aimed to explore the methylene blue (MB) adsorption mechanism by wine-processing waste sludge (WPWS). The WPWS contains a high cation-exchange capacity (64.2 cmol(c) kg(-1)) and organic matter (52.8%). The parameters affecting MB adsorption included pH, initial concentration of MB, reaction temperature, particle size and dosage of WPWS. The WPWS adsorption isotherms of MB were only well described by Langmuir adsorption isotherm. The maximum adsorption capacity (Q(m)) of MB was 285.7 mg g(-1) at 25 °C. The activation energy determined by Arrhenius equation is 29.995 kJ mol(-1). Under steady-state reaction conditions, the Gibb free energy (ΔG°) ranged from -24.607 to -27.092 kJ mol(-1) and ΔH° was -8.926 kJ mol(-1), indicating that lower reaction temperature would favor MB adsorption. Therefore, MB adsorption by WPWS was a spontaneous, exothermic and physisorption reaction.

Phosphorus runoff from sewage sludge applied to different slopes of lateritic soil.

Sewage sludge (SS) applied to sloping fields at rates that exceed annual forest nutrient requirements can be a source of phosphorus (P) in runoff. This study investigates the effects of different slopes (18, 27, 36, and 45%) on P in runoff from plots amended with SS (120 Mg ha). Lateritic soil (pH 5.2) was exposed to five simulated rainfalls (90 mm h) on outdoor plots. When sludge was broadcast and mixed with surface soils, the concentrations and loss in runoff of total P in the mixed sample (MTP), total P in the settled sample (STP), total particulate P (TPP), total suspended P (TSP), and total dissolved P (TDP) were highest at 1 or 18 d after application. Initially, pollution risks to surface waters generally increased to different degrees with steeper slopes, and then diminished gradually with dwindling differences between the slopes. The runoff losses coefficient of MTP increased in the order 36 > 45 > 27 > 18%. The initial event (1 and 18 d) accounted for 67.0 to 83.6% of total runoff P losses. Particulate fraction were dominant carriers for P losses, while with the lower slopes there was higher content of P per unit particulate fraction in runoff. Phosphorus losses were greatly affected by the interaction of sludge-soil-runoff and the modification of soil properties induced by sludge amendment. It is recommended to choose lower slopes (<27%) to reduce risk of P losses. Thus, the risk of application sludge to sloping fields in acid soils should be studied further in the field under a wider diversity of conditions.

Aluminium and nutrients induce changes in the profiles of phenolic substances in tea plants (Camellia sinensis CV TTES, No. 12 (TTE)).

BACKGROUND: Tea plants are always cultivated in acid soils in hilly regions and their growth can be dependent on to soluble aluminium (Al). The mechanism of Al detoxification and the influence of Al on phenolic compounds (i.e. catechin) in the roots of tea plants has remained obscure. This study aimed to investigate the influence of Al changes on the concentrations of phenolic substances in tea plants through hydroponic experiments. RESULTS: Tea plants were cultivated in nutrient solution containing 1.5 and 2.5 mmol L(-1) Al, and these treatments enhanced the growth of new buds and roots. Aluminium stimulated the uptake of Ca, Mg, K and Mn, whereas the uptake of Fe, Cu and Zn was retarded. Moreover, total phenol concentrations in tea plant tissues increased with increasing Al concentrations. In general, catechin concentrations in leaves increased with increasing Al concentrations in the hydroponic experiments. High correlation coefficients were obtained between Al and (-)-ECG (r(2) = 0.85, P < 0.01) and between Al and total phenols (r(2) = 0.92, P < 0.01). CONCLUSIONS: The Al concentration in tea plants indeed increases catechin concentrations and plays an important role in the growth of tea plants.

Removal of heavy metals from contaminated paddy soils using chemical reductants coupled with dissolved organic carbon solutions.

General acid washing is commonly used to treat heavy metal-contaminated soils, but it is sometimes difficult to achieve remediation aims in severely polluted soils. If we expose the surfaces of Fe oxide minerals to reductive dissolution during washing treatment, more of the metals initially adsorbed to these surfaces will be liberated, which may encourage the removal of heavy metals. Initially, the metal extraction capabilities of nine chemical reductants were compared in ten soil samples polluted by Cr, Cu, Zn, and Ni. Sodium dithionite (Na2S2O4) and ferrous sulfate (FeSO4) were screened for subsequent intensive research. In summary, the Na2S2O4 solutions had higher Cr, Cu, and Zn removal rates than either the FeSO4 or acid solution. Application of dissolved organic carbon (DOC) further increased the removal of heavy metals by complexation. About 15%, 86%, 32%, and 52% of the Cr, Cu, Zn, and Ni, respectively, were removed from the representative soil (M-2) by two-stage washing using 0.2 M Na2S2O4 coupled with 1,500 mg L-1 DOC solution at pH 2.0. Meanwhile, most soil fertility was preserved: ammonium nitrogen was increased 3.9 times; the increase in exchangeable potassium was 33%; and the reduction in available P was only 10%.

Seasonal Change in Microbial Diversity and Its Relationship with Soil Chemical Properties in an Orchard.

This study aimed to determine the microbial diversity at different soil depths (0-5 and 5-20 cm) in a subtropical orchard during different seasons (i.e., spring, summer and autumn) to advance knowledge of the roles of microbes in orchard ecosystem balance. In tracking experiments conducted in an orchard (established in 1996), the phospholipid fatty acid (PLFA) biomarker method was employed to determine the soil microbial system. The total PLFA concentration did not vary significantly between soil depths but changed between seasons. It peaked in the summer at 258.97 ± 23.48 µg g soil-1 from 0-5 cm and at 270.99 ± 58.94 µg g soil-1 from 5-20 cm. A total of 33 microbial fatty acid biomarkers were observed and identified in the sampled soil. The quantities of PLFAs for 29 microbial groups varied significantly between seasons, except for 15:0 iso 3OH, 15:1 iso G, 16:0 2OH, and 17:0 iso 3OH. The bacterial PLFAs and fungal and actinomycetic PLFAs in the orchard soil collected in summer were significantly more abundant than those collected in the spring or autumn (P < 0.01). The number of soil microorganism species (richness) and the Simpson and Shannon-Wiener indexes were all highest in summer. The total PLFAs, bacterial PLFAs, fungal PLFAs, actinomycetic PLFAs, richness, and Simpson and Shannon-Wiener indexes were all significantly negatively correlated with soil pH, total organic carbon (TOC), total nitrogen (TN) and the cation exchange capacity (CEC) (P < 0.05).

Adsorption mechanisms of chromate and phosphate on hydrotalcite: A combination of macroscopic and spectroscopic studies.

Hydrotalcite (HT) is a layered double hydroxide (LDH), which is considered as a potential adsorbent to remove anion contaminants. In this study, adsorption of chromate (CrO4) and phosphate (PO4) on HT was conducted at various pH and temperatures. Related adsorption mechanisms were determined via the isotherm, kinetic, and competitive adsorption studies as well as the Cr K-edge X-ray absorption fine-structure (XAFS) spectroscopy. The maximum adsorption capacities for CrO4 and PO4 on HT were 0.16 and 0.23 mmol g-1. Regarding adsorption kinetics, CrO4 and PO4 adsorption on HT could be well described by the second order model, and the rate coefficient of CrO4 and PO4 on HT decreased significantly with the increasing pH from 5 to 9. The adsorption kinetics for CrO4 and PO4 were divided into fast and slow stages with the boundary at 15 min. This biphasic adsorption behavior might be partially attributed to multiple reactive pathways including anion exchange and surface complexation. Fitting results of Cr K-edge EXAFS analysis showed a direct bonding between CrO4 and Al on HT surfaces. Such a surface complexation appeared to be the rate-limiting step for CrO4 adsorption on HT. By contrast, the diffusion through the hydrated interlayer space of HT was the major rate-limiting step for PO4. This study determined the adsorption behaviors of CrO4 and PO4 on HT, including the initial transfer process and the subsequent adsorption mechanisms. Such information could improve the strategy to use HT as the potential adsorbent for the remediation of anionic pollutants.

Removal of benzene and toluene by carbonized bamboo materials modified with TiO2.

Carbonized moso bamboo (Phyllostachys pubescens) was coated with TiO(2) nanoparticles to enhance its removal efficiency of harmful gases. Carbonized bamboo-TiO(2) composite (CBC) was prepared by heating mixtures of carbonized bamboo powder (CB) and TiO(2) nanoparticles, denoted as CBM, under nitrogen condition. TiO(2) nanoparticle and carbonized bamboo powder were mixed with the mass ratios of 1/1 and 2/1, respectively. At the same mass ratio of TiO(2) to CB, the benzene and toluene removal efficiencies follow the trend: CBC>CBM>CB, which is consistent with the amount of TiO(2) validated by elemental analysis. Sorption mechanism of benzene and toluene by CB, CBM and CBC might belong to hydrophobic-hydrophobic interaction, observed by depletion of untreated bamboo (UB) carbohydrates during carbonization. Sorption kinetics was further analyzed, and optimal correlation was found by fitting with the Elovich kinetic equation.

Kinetics of radiocesium released from contaminated soil by fertilizer solutions.

(137)Cs is one of the major artificial radionuclides found in environments; but the mechanisms behind fertilizer-induced (137)Cs desorption from soil remain unknown. This study aimed to investigate the kinetics and mechanisms underlying the various cations and anions that cause Cs release from soil under acidic conditions. NH(4)H(2)PO(4) (1M), 0.5M (NH(4))(2)SO(4), 1M NH(4)Cl, 1M KCl or 1M NaCl solutions were added to (137)Cs-contaminated soil. The power function model well described the short term (137)Cs desorption with the solutions. The rate coefficients for (137)Cs release from soil in NH(4)H(2)PO(4), (NH(4))(2)SO(4), NH(4)Cl, and KCl solutions were 7.7, 7.3, 6.8, and 6.1 times higher than the rate observed in a NaCl solution, respectively. The NH(4)H(2)PO(4) and (NH(4))(2)SO(4) solutions induced significantly greater (137)Cs release from the contaminated soil than the NH(4)Cl, KCl and NaCl solutions. After four times repeated extractions with the fertilizer solutions, the total amount of (137)Cs extracted by (NH(4))(2)SO(4) and NH(4)Cl solutions reached equilibrium, while that extracted using an NH(4)H(2)PO(4) solution continued to increase. The combined effect of phosphate and protons was the major mechanism behind (137)Cs release from contaminated soils, when an NH(4)H(2)PO(4) solution was used.

p-Nitrophenol, phenol and aniline sorption by organo-clays.

The aims of this study were to make use of organo-clays (i.e., Cloisite-10A, Cloisite-15A, Cloisite-30B and Cloisite-93A), to remove p-nitrophenol, phenol and aniline of organic pollutants. The organo-clays were characterized by X-ray diffraction (XRD). Sorption isotherm, kinetic and pH effect of p-nitrophenol, phenol and aniline sorbed by four organo-clays were evaluated. The d-spacings (001) of the XRD peak of Cloisite-10A, Cloisite-15A, Cloisite-30B and Cloisite-93A are 1.98, 2.76, 1.93 and 2.64 nm, respectively. The d(001)-spacings of XRD indicated that these p-nitropheno, phenol and aniline could penetrate into the interlayer of clays and expand the d(001)-spacings. The linear sorption isotherm of constant partition was employed to describe the sorption isotherms of phenols sorbed by organo-clays through hydrophobic-hydrophobic chemical reactions. The parabolic diffusion and power-function of kinetic models were employed to describe properly the kinetic experiments. The rate limiting step of the p-nitrophenol sorption reactions on organo-clays were diffusion-controlled processes (i.e., 15A, 30B, 93A) and chemical-controlled process for 10A organo-clays. The pre-exponential factor of the p-nitrophenol sorbed by four organo-clays showed the trend as follows: 10A> 30B> 93A> 15A. The efficiency of these organo-clays in removing phenol compounds in water treatments merit further study.

Identification of dioxin and dioxin-like polychlorbiphenyls in plant tissues and contaminated soils.

The environmental analysis laboratory (EAL) of the Taiwan environmental protection administration (TEPA) has been monitoring certain sites polluted in southern Taiwan by pentachlorophenol manufacture. The analytical results revealed peculiarities in the concentration distributions in plant tissues. There are no available data on dioxin and dioxin-like polychlorbiphenyls (DL-PCBs), which can be taken up from contaminated soils by plant tissues. Thus, the aims of this study were to identify, understand, and to validate these dioxin and DL-PCBs concentrations in plant tissues of the contaminated soils. This research analyzed ten species of plant tissues, including tappa (Boussonetia papyrifera) and common jasmin orange (Murraya paniculata) from sites in southern Taiwan, with different levels of contamination. Dioxin concentrations in these plant tissues ranged from 12.7 to 2919 ng WHO-TEQ(DF)/kg dry weight (d.w.), with average of 463 ng WHO-TEQ(DF)/kg d.w. (n=16). The DL-PCBs concentrations ranged from 0.236 to 1.75 ng WHO-TEQp/kg d.w., with an average of 0.605 ng WHO-TEQp/kg d.w. (n=8). Tappa is one of the most common and fastest growing plants in Taiwan. It also shows the highest tolerance to environmental contaminants and accumulates dioxin and DL-PCBs. This is one of the best species to take up dioxins and DL-PCBs effectively. It can be recommended as a candidate for dioxin and DL-PCB phyto-remediation. These data are useful to evaluate bioaccumulation of dioxin and DL-PCBs, and to study the capability of phyto-remediation in contaminated soils.