RESUMO
Speciated characterization of Volatile Organic Compounds (VOCs), including oxygenated VOCs (OVOCs), from construction machinery and river ships in China is currently lacking. In this regard, we conducted field measurement on speciated VOC (including OVOC) emissions from six construction machinery and five river ships in the Pearl River Delta (PRD) region to identify VOC emission characteristics. We noticed that OVOC emissions from construction machinery and ships accounted for more than 50% of the total VOC emissions, followed by alkenes, aromatics and alkanes. Formaldehyde and acetaldehyde were the most emission species, accounting for 61.8%-83.2% of OVOCs. For construction machinery, the fuel-based emission factors of roller, grader and pile driver were 3.12, 3.12 and 7.36 g/kg, respectively. With the rigorous restraint by the national emission standards, VOC emissions of construction machinery had decreased considerably, especially during stage â ¢. Ozone formation potential was also significantly reduced due to the significant decrease in emissions of OVOCs and alkenes with higher reactivity. For river ships, the fuel-based emission factors of cargo ships and speedboat were 1.46 and 0.44 g/kg, respectively. VOC emissions from construction machinery and river ships in Guangdong Province in 2017 were 8851.0 and 4361.0 ton, respectively. This study filled the knowledge gaps of reactive gas emissions from different kinds of non-road mobile sources over the PRD, and more importantly, highlighted the necessity in adding OVOC measurement to give a complete and accurate depiction of reactive gas emissions from non-road mobile sources.
Assuntos
Poluentes Atmosféricos/análise , Ozônio/análise , Compostos Orgânicos Voláteis/análise , China , Monitoramento Ambiental , Rios , Navios , Emissões de Veículos/análiseRESUMO
In this study, 127 light-duty gasoline cars and 10 light-duty gasoline trucks with different emission standards were selected to explore the influences of different conditions and vehicle parameters on the emission characteristics of carbon dioxide (CO2), carbon monoxide (CO), nitrogen oxides (NOx), hydrocarbons (HC), and methane (CH4) using a portable emission measurement system based on a chassis dynamometer under acceleration simulation mode. The results showed that the gaseous pollutants of light-duty gasoline vehicles displayed a relatively lower emission rate under the idle condition, which accounted for only 22.9% and 25.8% of the emission rate at the accelerated condition and constant speed condition, respectively. The pollutant emission characteristics were closely related to the working conditions. The emission rates of CO2 and NOx in the accelerated condition were less than those at the constant speed condition, while the emission rates of CO, HC, and CH4 in the accelerated condition were higher than those at the constant speed condition. In the constant low-speed condition, the emission factors of CO2, CO, NOx, HC, and CH4 were 383.20, 2.98, 1.60, 0.14, and 0.03 g·km-1 for light-duty gasoline cars, respectively, and 360.66, 2.64, 1.61, 0.0055, and 0.0027 g·km-1 for light-duty gasoline trucks, respectively. Tighter emission standards have caused significant reductions in emissions. The emission factors of CO, NOx, HC, and CH4 could be decreased by 87.5%, 97.3%, 97.9%, and 86.4%, respectively, from China â to China â ¤. A non-linear relationship was found between the age, odometer, vehicle weight, and vehicular emissions. In addition, the engine displacement was positively correlated with vehicular emissions.