Aggregation-Enabled Electrochemistry in Confined Nanopore Capable of Complementary Faradaic and Non-Faradaic Detection.

Electrochemistry that empowers innovative nanoscopic analysis has long been pursued. Here, the concept of aggregation-enabled electrochemistry (AEE) in a confined nanopore is proposed and devised by reactive oxygen species (ROS)-responsive aggregation of CdS quantum dots (QDs) within a functional nanopipette. Complementary Faradaic and non-Faradaic operations of the CdS QDs aggregate could be conducted to simultaneously induce the signal-on of the photocurrents and the signal-off of the ionic signals. Such a rationale permits the cross-checking of the mutually corroborated signals and thus delivers more reliable results for single-cell ROS analysis. Combined with the rich biomatter-light interplay, the concept of AEE can be extended to other stimuli-responsive aggregations for electrochemical innovations.

Aprotic Lithium-Oxygen Batteries Based on Nonsolid Discharge Products.

Aprotic lithium-oxygen (Li-O2) batteries are considered to be a promising alternative option to lithium-ion batteries for high gravimetric energy storage devices. However, the sluggish electrochemical kinetics, the passivation, and the structural damage to the cathode caused by the solid discharge products have greatly hindered the practical application of Li-O2 batteries. Herein, the nonsolid-state discharge products of the off-stoichiometric Li1-xO2 in the electrolyte solutions are achieved by iridium (Ir) single-atom-based porous organic polymers (termed as Ir/AP-POP) as a homogeneous, soluble electrocatalyst for Li-O2 batteries. In particular, the numerous atomic active sites act as the main nucleation sites of O2-related discharge reactions, which are favorable to interacting with O2-/LiO2 intermediates in the electrolyte solutions, owing to the highly similar lattice-matching effect between the in situ-formed Ir3Li and LiO2, achieving a nonsolid LiO2 as the final discharge product in the electrolyte solutions for Li-O2 batteries. Consequently, the Li-O2 battery with a soluble Ir/AP-POP electrocatalyst exhibits an ultrahigh discharge capacity of 12.8 mAh, an ultralow overpotential of 0.03 V, and a long cyclic life of 700 h with the carbon cloth cathode. The manipulation of nonsolid discharge products in aprotic Li-O2 batteries breaks the traditional growth mode of Li2O2, bringing Li-O2 batteries closer to being a viable technology.

Lewis Base-Boryl Radicals Enabled Borylation Reactions and Selective Activation of Carbon-Heteroatom Bonds.

ConspectusThe past decades have witnessed tremendous progress on radical reactions. However, in comparison with carbon, nitrogen, oxygen, and other main group element centered radicals, the synthetic chemistry of boron centered radicals was less studied, mainly due to the high electron-deficiency and instability of such 3-center-5-electron species. In the 1980s, Roberts and co-workers found that the coordination of a Lewis base (amines or phosphines) with the boron center could form 4-center-7-electron boryl radicals (Lewis base-boryl radicals, LBRs) that are found to be more stable. However, only limited synthetic applications were developed. In 2008, Curran and co-workers achieved a breakthrough with the discovery of N-heterocyclic carbene (NHC) boryl radicals, which could enable a range of radical reduction and polymerization reactions. Despite these exciting findings, more powerful and valuable synthetic applications of LBRs would be expected, given that the structures and reactivities of LBRs could be easily modulated, which would provide ample opportunities to discover new reactions. In this Account, a summary of our key contributions in LBR-enabled radical borylation reactions and selective activation of inert carbon-heteroatom bonds will be presented.Organoboron compounds have shown versatile applications in chemical society, and their syntheses rely principally on ionic borylation reactions. The development of mechanistically different radical borylation reactions allows synthesizing products that are inaccessible by traditional methods. For this purpose, we progressively developed a series of NHC-boryl radical mediated chemo-, regio-, and stereoselective radical borylation reactions of alkenes and alkynes, by which a wide variety of structurally diverse organoboron molecules were successfully prepared. The synthetic utility of these borylated products was also demonstrated. Furthermore, we disclosed a photoredox protocol for oxidative generation of NHC-boryl radicals, which enabled useful defluoroborylation and arylboration reactions.Selective bond activation is an ideal way to convert simple starting materials to value-added products, while the cleavage of inert chemical bonds, in particular the chemoselectivity control when multiple identical bonds are present in similar chemical environments, remains a long-standing challenge. We envisaged that finely tuning the properties of LBRs might provide a new solution to address this challenge. Recently, we disclosed a 4-dimethylaminopyridine (DMAP)-boryl radical promoted sequential C-F bond functionalization of trifluoroacetic acid derivatives, in which the α-C-F bonds were selectively snipped via a spin-center shift mechanism. This strategy enables facile conversion of abundantly available trifluoroacetic acid to highly valuable mono- and difluorinated molecules. Encouraged by this finding, we further developed a boryl radical enabled three-step sequence to construct all-carbon quaternary centers from a range of trichloromethyl groups, where the three C-Cl bonds were selectively cleaved by the rational choice of suitable boryl radical precursors in each step. Furthermore, a boryl radical promoted dehydroxylative alkylation of α-hydroxy carboxylic acid derivatives was achieved, allowing for the efficient conversion of some biomass platform molecules to high value products.

Bouncing Dynamics of Drops' Successive Off-Center Impact.

Bouncing dynamics of a trailing drop off-center impacting a leading drop with varying time intervals and Weber numbers are investigated experimentally. Whether the trailing drop impacts during the spreading or receding process of the leading drop is determined by the time interval. For a short time interval of 0.15 ≤ Δt* ≤ 0.66, the trailing drop impacts during the spreading of the leading drop, and the drops completely coalesce and rebound; for a large time interval of 0.66 < Δt* ≤ 2.21, the trailing drop impacts during the receding process, and the drops partially coalesce and rebound. Whether the trailing drop directly impacts the surface or the liquid film of the leading drop is determined by the Weber number. The trailing drop impacts the surface directly at moderate Weber numbers of 16.22 ≤ We ≤ 45.42, while it impacts the liquid film at large Weber numbers of 45.42 < We ≤ 64.88. Intriguingly, when the trailing drop impacts the surface directly or the receding liquid film, the contact time increases linearly with the time interval but independent of the Weber number; when the trailing drop impacts the spreading liquid film, the contact time suddenly increases, showing that the force of the liquid film of the leading drop inhibits the receding of the trailing drop. Finally, a theoretical model of the contact time for the drops is established, which is suitable for different impact scenarios of the successive off-center impact. This study provides a quantitative relationship to calculate the contact time of drops successively impacting a superhydrophobic surface, facilitating the design of anti-icing surfaces.

Vapor Nucleation on Hybrid-Wetting Nanoconvex Surfaces: The Competition between Intrinsic Wettability and Topography.

Hybrid-wetting surfaces with hydrophilic spots reduced from the micrometer to nanometer scale have been confirmed to enhance vapor nucleation while simultaneously minimizing droplet pinning. Given that surface topography also plays a critical role in influencing nucleation characteristics, the effect of competition between intrinsic wettability and topography on nucleation remains unclear when both surface topography and hydrophilic regions approach the critical nucleation size. This work investigated vapor nucleation on two types of hybrid-wetting nanoconvex surfaces. On random hybrid-wetting convex surfaces, the most negative potential energy sites were located at the sides of the convex structures, leading vapor to preferentially nucleate at these locations, consistent with observations on homogeneous surfaces. Despite similar average potential energy values across the surface, wettability variations in hydrophilic and hydrophobic atoms significantly alter the surface energy distribution. As the wettability difference between hydrophilic and hydrophobic atoms increases, stronger hydrophilic atoms generate relatively higher local energy regions, promoting vapor rapid nucleation. The edge effect still exists at a hydrophilic atom ratio of 10%, and competition among hydrophilic spots impedes vapor nucleation and growth. However, when the ratio increases to 40%, the increased surface average potential energy promotes the probability of vapor contacting the surface, leading to rapid vapor nucleation on the sides of the convex structures. In addition, surface potential energy analysis and the Monte Carlo method revealed that nucleation locations on nanoconvex surfaces are governed by the competition between intrinsic wettability and topography. When the magnitude of the potential energy generated by the hydrophilic atoms exceeds that from the topography, stronger solid-liquid interactions at the top of the convex structure increase the likelihood of vapor contacting the surface, resulting in nucleation at the top. Conversely, when the magnitude of the potential energy generated by hydrophilic atoms is lower than that from topography, nucleation preferentially still occurs on the sides.

Synthesis of Chiral Diarylmethylamides via Catalytic Asymmetric Aza-Michael Addition of Amides to ortho-Quinomethanes.

Chiral diarylmethylamides are a privileged skeleton in many bioactive molecules. However, the enantioselective synthesis of such molecules remains a long-standing challenge in organic synthesis. Herein, we report a chiral bifunctional squaramide catalyzed asymmetric aza-Michael addition of amides to in situ generated ortho-quinomethanes, affording enantioenriched diarylmethylamides in good yields with excellent enantioselectivities. This work not only provides a new strategy for the construction of the diarylmethylamides but also represents the practicability of amides as nitrogen-nucleophiles in asymmetric organocatalysis.

Diastereo- and Enantioselective Synthesis of Eight-Membered N-Heterocycles from Benzofuran-Derived Azadienes and Ynones.

Enantioselective synthesis of eight-membered N-heterocycles represents a long-standing challenge in organic synthesis. Here, by combining the squaramide and DBU catalysis, a sequential asymmetric conjugate addition/cyclization reaction between benzofuran-derived azadienes and ynones has been well-developed, providing straightforward access to chiral eight-membered N-heterocycles in high yields with stereoselectivities. This protocol features the use of a bifunctional squaramide catalyst for controlling the enantioselectivity of products, while the DBU is utilized to achieve intramolecular cyclization and improve the diastereoselectivity of products.

Hydrogen-Bonded Organic Frameworks-based Electrolytes with Controllable Hydrogen Bonding Networks for Solid-State Lithium Batteries.

The lack of stable solid-state electrolytes (SSEs) with high-ionic conductivity and the rational design of electrode/electrolyte interfaces remains challenging for solid-state lithium batteries. Here, for the first time, a high-performance solid-state lithium-oxygen (Li-O2) battery is developed based on the Li-ion-conducted hydrogen-bonded organic framework (LHOF) electrolyte and the HOF-DAT@CNT composite cathode. Benefiting from the abundant dynamic hydrogen bonding network in the backbone of LHOF-DAT SSEs, fast Li+ ion transport (2.2×10-4 S cm-1), a high Li+ transference number (0.88), and a wide electrochemical window of 5.05 V are achieved. Symmetric batteries constructed with LHOF-DAT SSEs exhibit a stably cycled duration of over 1400 h with uniform deposition, which mainly stems from the jumping sites that promote a uniformly high rate of Li+ flux and the hydrogen-bonding network structure that can relieve the structural changes during Li+ transport. LHOF-DAT SSEs-based Li-O2 batteries exhibit high specific capacity (10335 mAh g-1), and stable cycling life up to 150 cycles. Moreover, the solid-state lithium metal battery with LHOF-DAT SSEs endow good rate capability (129.6 mAh g-1 at 0.5 C), long-term discharge/charge stability (210 cycles). The design of LHOF-DAT SSEs opens an avenue for the development of novel SSEs-based solid-state lithium batteries.

Reversible Carbon Dioxide/Lithium Oxalate Regulation toward Advanced Aprotic Lithium Carbon Dioxide Battery.

Li-CO2 batteries have received significant attention owing to their advantages of combining greenhouse gas utilization and energy storage. However, the high kinetic barrier between gaseous CO2 and the Li2CO3 product leads to a low operating voltage (<2.5 V) and poor energy efficiency. In addition, the reversibility of Li2CO3 has always been questioned owing to the introduction of more decomposition paths caused by its higher charging plateau. Here, a novel "trinity" Li-CO2 battery system was developed by synergizing CO2, soluble redox mediator (2,2,6,6-tetramethylpiperidoxyl, as TEM RM), and reduced graphene oxide electrode to enable selective conversion of CO2 to Li2C2O4. The designed Li-CO2 battery exhibited an output plateau reaching up to 2.97 V, higher than the equilibrium potential of 2.80 V for Li2CO3, and an ultrahigh round-trip efficiency of 97.1 %. The superior performance of Li-CO2 batteries is attributed to the TEM RM-mediated preferential growth mechanism of Li2C2O4, which enhances the reaction kinetics and rechargeability. Such a unique design enables batteries to cope with sudden CO2-deficient environments, which provides an avenue for the rationally design of CO2 conversion reactions and a feasible guide for next-generation Li-CO2 batteries.

Photo-Assisted Chemical Self-Rechargeable Zinc Ion Batteries with High Charging and Discharging Efficiency.

Chemical self-recharging zinc ion batteries (ZIBs), which are capable of auto-recharging in ambient air, are promising in self-powered battery systems. Nevertheless, the exclusive reliance on chemical energy from oxygen for ZIBs charging often would bring some obstacles in charging efficiency. Herein, we develop photo-assisted chemical self-recharging aqueous ZIBs with a heterojunction of MoS2/SnO2 cathode, which are favorable to enhancing both the charging and discharging efficiency as well as the chemical self-charging capabilities under illumination. The photo-assisted process promotes the electron transfer from MoS2/SnO2 to oxygen, accelerating the occurrence of the oxidation reaction during chemical self-charging. Furthermore, the electrons within the MoS2/SnO2 cathode exhibit a low transfer impedance under illumination, which is beneficial to reducing the migration barrier of Zn2+ within the cathode and thereby facilitating the uniform inserting of Zn2+ into MoS2/SnO2 cathode during discharging. This photo-assisted chemical self-recharging mechanism enables ZIBs to attain a maximum self-charging potential of 0.95 V within 3 hours, a considerable self-charging capacity of 202.5 mAh g-1 and excellent cycling performance in a self-charging mode. This work not only provides a route for optimizing chemical self-charging energy storage, but also broadens the potential application of aqueous ZIBs.

Boryl Radical as a Catalyst in Enabling Intra- and Intermolecular Cascade Radical Cyclization Reactions: Construction of Polycyclic Molecules.

Cascade radical cyclization constitutes an atom- and step-economic route for rapid assembly of polycyclic molecular skeletons. Although an array of redox-active metal catalysts has recently shown robust applications in enabling various catalytic cascade radical processes, the use of free organic radical as the catalyst, which is capable of triggering strategically distinct cascades, has rarely been developed. Here, we disclosed that the benzimidazolium-based N-heterocyclic carbene (NHC)-boryl radical is capable of catalyzing cascade cyclization reactions in both intra- and intermolecular pathways, assembling [5,5] fused bicyclic and [6,6,6] fused tricyclic molecules, respectively. The catalytic reactions start with the chemo- and regioselective addition of the boryl radical catalyst to a tethered alkene or alkyne moiety, followed by either an intramolecular formal [3+2] or an intermolecular [2+2+2] cycloaddition process to construct bicyclo[3.3.0]octane or tetrahydrophenanthridine skeletons, respectively. Eventually, a ß-elimination occurs to release the boryl radical catalyst, completing a catalytic cycle. High to excellent diastereoselectivity is achieved in both catalytic reactions under substrate control.

What Controls the Hole Formation of Nanodroplets: Hydrodynamic or Thermodynamic Instability?

Using molecular dynamics simulations, we investigate the air hole formation of water nanodroplets impacting hydrophilic to hydrophobic surfaces in the range of static contact angles from 30° to 140° with different initial surface temperatures ranging from 300 to 1000 K. We show that the hole dynamics of nanodroplets are different from those observed in millimeter-sized droplets. The hole formation can be observed on smooth surfaces for nanodroplets; however, it only occurs on nonsmooth surfaces for millimeter-sized droplets. We clarify that the hole formation of nanodroplets is triggered by a nucleated vapor bubble due to thermodynamic instability, whereas it is initiated by air bubble entrapment during impact due to hydrodynamic instability for millimeter-sized droplets. The hole formation of nanodroplets relies heavily on the surface temperature and surface wettability, because the nucleated vapor bubble more easily occurs and grows on the surface with high initial temperatures and hydrophobic surfaces. Based on the thermal stability analysis, a criterion is developed to predict the hole formation of nanodroplets, which verifies the dependence of hole formation on the surface temperature and wettability. Furthermore, we show that the ring-bouncing of nanodroplets is triggered by the nucleated vapor bubble. We clarify the reasons for the reduced contact time of nanodroplets caused by the ring-bouncing.

Contact Time of Droplet Impact on Superhydrophobic Cylindrical Surfaces with a Ridge.

This study investigates whether adding ridges to a superhydrophobic cylindrical surface can reduce contact times compared to those of ridged flat or cylindrical surfaces, inspired by the shortened contact time achieved by adding ridges to flat surfaces. The study focuses on studying azimuthal ridges on the cylinder through experimentation, emphasizing the impact dynamics and contact time characteristics under varying We (Weber number) and D* (dimensionless droplet diameter). Within the ultralow Weber number range (ULWR), low Weber number range (LWR), and medium Weber number range (MWR), the contact time is longer than on ridged flat surfaces. In the high Weber number range (HWR), the opposite is observed: increased inertial forces lead to the rupture of the liquid film above the ridges due to Rayleigh-Plateau instability. As a result, the primary droplet splits into two sections with curvature effects promoting its recoiling and rebounding. This study introduces a criterion, defined as C = We/D*, and finds that when C exceeds 2.42, not only is the contact time shorter than on ridged flat or cylindrical surfaces, but it also further decreases with an increase in We or a decrease in D*. The contact time characteristics observed in the HWR offer potential applications in areas such as anti-icing.

Contact Time of a Droplet Off-Centered Impacting a Superhydrophobic Cylinder.

Extensive research has shown that a superhydrophobic cylindrical substrate could lead to a noncircumferential symmetry of an impacting droplet, reducing the contact time accordingly. It is of practical significance in applications, such as anti-icing, anticorrosion, and antifogging. However, few accounts have adequately addressed the off-centered impact of the droplet, despite it being more common in practice. This work investigates the dynamic behavior of a droplet off-centered impacting a superhydrophobic cylinder via the lattice Boltzmann method. The effect of the off-centered distance is primarily discussed for droplets taking various Weber numbers and cylinder sizes. The results show that the imposition of an off-center distance can further disrupt the droplet symmetry during the impact. As the off-center distance increases, the droplet movement is gradually tilted toward the offset side until it tangentially passes the cylinder side, resulting in a direct dripping mode. The dynamic features, focusing mainly on maximum spreading in the axial direction and contact time, are specifically explored. A quantitative model of the maximum spreading factor is proposed based on the equivalent transformation from the off-center impact into oblique hitting, considering the full range of off-centered distance. A preliminary contact time model is established for droplet off-centered impacting superhydrophobic cylinders by substituting the maximum spreading and the effective velocity of the liquid moving. This work aims to make an original contribution to the fundamental knowledge of droplet impact and could be of value for related applications.

Effect of Asymmetry on the Contact Time of Droplet Impact on Superhydrophobic Cylindrical Surfaces.

Reducing the contact time during the droplet impact on the surface is crucial for anti-icing, self-cleaning, and heat transfer optimization applications. This study aims to minimize the contact time by modifying the surface curvature to create an asymmetric impact process. Our experiments showed that the increase in Weber numbers (We) and the decrease in the ratio of surface diameter to droplet diameter (D*) intensify the asymmetry of the impact process, yielding four distinct rebound modes. Low asymmetry observes the liquid retract toward the central point (Rebound Modes 1 and 2), whereas high asymmetry yields a wing-like rebound (Rebound Modes 3 and 4). In Rebound Mode 1, increased asymmetry would lead to more extended contact due to the prolonged waiting period. Conversely, the reduction in contact time in Rebound Mode 2 occurs due to increased asymmetry with no waiting period. For Rebound Modes 3 and 4, the retraction time could be divided into three stages, generated by two liquid detachment modes from the surface. Analysis reveals that an increased asymmetry would reduce the retraction time during the first stage but prolong it during the third stage, with no significant effects on the second. Four correlations, each pertaining to a distinct impact mode, are proposed based on these analyses to describe the contact time concerning We and D* for droplets impacting a superhydrophobic cylindrical surface.

Boryl Radicals Enabled a Three-Step Sequence to Assemble All-Carbon Quaternary Centers from Activated Trichloromethyl Groups.

The construction of diversely substituted all-carbon quaternary centers has been a longstanding challenge in organic synthesis. Methods that add three alkyl substituents to a simple C(sp3) atom rely heavily on lengthy multiple processes, which usually involve several preactivation steps. Here, we describe a straightforward three-step sequence that uses a range of readily accessible activated trichloromethyl groups as the carbon source, the three C-Cl bonds of which are selectively functionalized to introduce three alkyl chains. In each step, only a single C-Cl bond was cleaved with the choice of an appropriate Lewis base-boryl radical as the promoter. A vast range of diversely substituted all-carbon quaternary centers could be accessed directly from these activated CCl3 trichloromethyl groups or by simple derivatizations. The use of different alkene traps in each of the three steps enabled facile collections of a large library of products. The utility of this strategy was demonstrated by the synthesis of variants of two drug molecules, whose structures could be easily modulated by varying the alkene partner in each step. The results of kinetic and computational studies enabled the design of the three-step reaction and provided insights into the reaction mechanisms.

Impact Dynamics of a Single Droplet on Hydrophobic Cylinders: A Lattice Boltzmann Study.

This study numerically investigates the effects of the Weber number (We) and cylinder-to-droplet radius ratio (R*) on the impact dynamics of a low-viscosity droplet on a hydrophobic cylinder by the lattice Boltzmann method. The intrinsic contact angle of the surface is chosen as θ0 = 122°± 2°, which ensures a representative hydrophobicity. The regime diagram of the impact dynamics in the parameter space of We versus R* is established with categories of split and nonsplit regimes. The droplet would split during impact as α = We/R* exceeds a critical value. In the nonsplit regime, the droplet bounces off the cylinder at most Weber numbers unless the impact velocity is minuscule (We < 2). The contact time of the droplet on the cylinder surface decreases with increasing R* or decreasing We, indicating bouncing is facilitated under such conditions. This can be explained by the suppressed adhesion dissipation between the droplet and surface due to a reduction in the contact area. In the split regime, sufficient kinetic energy inside the impacting droplet determines whether the whole droplet could detach from the surface. With a small cylinder (R* < 0.83) and large We (>25), the adhesion effect is weakened for the side fragments because of the small contact area, and it facilitates the dripping of fragments. For other conditions, the detachment, especially for the tiny droplet on the cylinder top, only occurs if the deformation is prominent at We > 35. Moreover, the spreading dynamics of the impacting droplet are also highlighted in this work.

Dehydroxylative Alkylation of α-Hydroxy Carboxylic Acid Derivatives via a Spin-Center Shift.

A strategically distinct dehydroxylative alkylation reaction of α-hydroxy carboxylic acid derivatives with alkenes is developed. The reaction starts with the attack of a 4-dimethylaminopyridine (DMAP)-boryl radical to the carbonyl oxygen atom, followed by a spin-center shift (SCS) to trigger the C-O bond scission. The resulting α-carbonyl radicals couple with a wide range of alkenes to furnish various alkylated products. This strategy allows for the efficient conversion of a wide array of α-hydroxy amides and esters derived from several biomass molecules and natural products to value-added compounds. Experimental and computational studies verified the reaction mechanism.

Effects of Nanodroplet Sizes on Wettability, Electrowetting Transition, and Spontaneous Dewetting Transition on Nanopillar-Arrayed Surfaces.

In this study, the wetting and dewetting behaviors of water nanodroplets containing various molecule numbers on nanopillar-arrayed surfaces in the presence or absence of an external electric field are investigated via molecular dynamics (MD) simulations, aiming to examine whether there is a scale effect. The results show that, in the absence of an electric field, nanodroplets on coexisting Cassie/Wenzel surfaces may be in the Cassie or the Wenzel state depending on their initial states, and apparent contact angles of the Cassie or Wenzel nanodroplets increase monotonously with increasing the droplet size. Energy analysis shows that on the same coexisting Cassie/Wenzel surface, when an electric field is imposed, a small nanodroplet possesses a lower energy barrier separating the Cassie state from the Wenzel state. Therefore, the small nanodroplet is easier to collapse into the Wenzel state. Moreover, the spontaneous Wenzel-to-Cassie dewetting transition is not observed for the nanodroplets after the removal of the electric field because the Wenzel state is a globally stable energetic state. With the same pillar geometry, both the wetting transition and the dewetting transition are significantly modified for liquids with higher intrinsic contact angles. The energy barrier of the wetting transition increases for both the large and small nanodroplets, meaning that the Cassie state becomes more robust. The energy curve shows that the Wenzel state of the large nanodroplet has higher energy so that the droplet can return to the Cassie state when removing the electric field. Intriguingly, although the small Wenzel nanodroplet has lower energy in the presence of the electric field, the dewetting transition still occurs. The increased solid-liquid interfacial tension when removing the electric field is responsible for this abnormal result. The wetting and dewetting transitions follow different energy pathways, leading to a hysteresis energy loop. There exists a critical water molecule number separating the unstable/stable Wenzel configurations, above which the Cassie state is energetically favorable and the dewetting transition can occur spontaneously after removing the electric field.

Asymmetric bis(oxazoline)-Ni(II) catalyzed α-hydroxylation of cyclic ß-keto esters under visible light.

Using visible light as a driving force and molecular oxygen as a green oxidant, we developed bis(oxazoline)-Ni(acac)2 catalyzed asymmetric α-hydroxylation of ß-keto esters under low photosensitizer loading, and the protocol enabled an efficient transformation to provide the desired chiral α-hydroxy-ß-keto esters in high yields (up to 99%) and enantioselectivities (up to 99% ee) at room temperature.