Analysis of the Chemical Distribution of Self-Assembled Microdomains with the Selective Localization of Amine-Functionalized Graphene Nanoplatelets by Optical Photothermal Infrared Microspectroscopy.

By incorporating 1-(2-aminoethyl)piperazine (AEPIP) into a commercial epoxy blend, a bicontinuous microstructure is produced with the selective localization of amine-functionalized graphene nanoplatelets (A-GNPs). This cured blend underwent self-assembly, and the morphology and topology were observed via spectral imaging techniques. As the selective localization of nanofillers in thermoset blends is rarely achieved, and the mechanism remains largely unknown, the optical photothermal infrared (O-PTIR) spectroscopy technique was employed to identify the compositions of microdomains. The A-GNP tends to be located in the region containing higher concentrations of both secondary amine and secondary alcohol; additionally, the phase morphology was found to be influenced by the amine concentration. With the addition of AEPIP, the size of the graphene domains becomes smaller and secondary phase separation is detected within the graphene domain evidenced by the chemical contrast shown in the high-resolution chemical map. The corresponding chemical mapping clearly shows that this phenomenon was mainly induced by the chemical contrast in related regions. The findings reported here provide new insight into a complicated, self-assembled nanofiller domain formed in a multicomponent epoxy blend, demonstrating the potential of O-PTIR as a powerful and useful approach for assessing the mechanism of selectively locating nanofillers in the phase structure of complex thermoset systems.

Taking a Tailored Approach to Material Design: A Mechanistic Study of the Selective Localization of Phase-Separated Graphene Microdomains.

To achieve multifunctional properties using nanocomposites, selectively locating nanofillers in specific areas by tailoring a mixture of two immiscible polymers has been widely investigated. Forming a phase-separated structure from entirely miscible molecules is rarely reported, and the related mechanisms to govern the formation of assemblies from molecules have not been fully resolved. In this work, a novel method and the underlying mechanism to fabricate self-assembling, bicontinuous, biphasic structures with localized domains made up of amine-functionalized graphene nanoplatelets are presented, involving the tailoring of compositions in a liquid processable multicomponent epoxy blend. Kinetics studies were carried out to investigate the differences in reactivity of various epoxy-hardener pairs. Molecular dynamics simulations and in situ optical photothermal infrared spectroscopy measurements revealed the trajectories of different components during the early stages of polymerization, supporting the migration (phase behavior) of each component during the curing process. Confirmed by the phase structure and the correlated chemical maps down to the submicrometer level, it is believed that the bicontinuous phase separation is driven by the change of the miscibility between various building blocks forming during polymerization, leading to the formation of nanofiller domains. The proposed morphology evolution mechanism is based on combining solubility parameter calculations with kinetics studies, and preliminary experiments are performed to validate the applicability of the mechanism of selectively locating nanofillers in the phase-separated structure. This provides a simple yet sophisticated engineering model and a roadmap to a mechanism for fabricating phase-separated structures with nanofiller domains in nanocomposite films.

The Dibber: Designing a standardised handheld tool for lay-up tasks.

We present an application of engineering and ergonomics principles in the design of a standardised tool, The Dibber, which is a tool with multiple geometric features to fit the diversity of lay-up tasks used in the composites industry. The Dibber is the result of a design process, which consists of a series of observations and prototyping to extract geometric requirements for lay-up tasks. To demonstrate that it is possible to design a standardised tool prototypes of the Dibber were distributed and 91 participants gave feedback. Our results are positive and show consistent patterns of use across industry sectors, as well as between novice and expert laminators.