Wideband Array Signal Processing with Real-Time Adaptive Interference Mitigation.

Wideband beamforming and interference cancellation for phased array antennas requires advances in signal processing algorithms, software, and specialized hardware platforms. A high-throughput array receiver has been developed that enables communication in radio frequency interference-rich environments with field programmable gate array (FPGA)-based frequency channelization and packetization. In this study, a real-time interference mitigation algorithm was implemented on graphics processing units (GPUs) contained in the data pipeline. The key contribution is a hardware and software pipeline for subchannelized wideband array signal processing with 150 MHz instantaneous bandwidth and interference cancellation with a heterogeneous, distributed, and scaleable digital signal processing (DSP) architecture that achieves 30 dB interferer cancellation null depth in real time with a moving interference source.

Optical electric field sensor sensitivity direction rerouting and enhancement using a passive integrated dipole antenna.

This work introduces a passive dipole antenna integrated into the packaging of a slab-coupled optical sensor to enhance the directional sensitivity of electro-optic electric field measurements parallel to the fiber axis. Using the passive integrated dipole antenna described in this work, a sensor that can typically only sense fields transverse to the fiber direction is able to sense a 1.25 kV/m field along the fiber direction with a gain of 17.5. This is verified through simulation and experiment.

Performance optimization in electric field gradient focusing.

Electric field gradient focusing (EFGF) is a technique used to simultaneously separate and concentrate biomacromolecules, such as proteins, based on the opposing forces of an electric field gradient and a hydrodynamic flow. Recently, we reported EFGF devices fabricated completely from copolymers functionalized with poly(ethylene glycol), which display excellent resistance to protein adsorption. However, the previous devices did not provide the predicted linear electric field gradient and stable current. To improve performance, Tris-HCl buffer that was previously doped in the hydrogel was replaced with a phosphate buffer containing a salt (i.e., potassium chloride, KCl) with high mobility ions. The new devices exhibited stable current, good reproducibility, and a linear electric field distribution in agreement with the shaped gradient region design due to improved ion transport in the hydrogel. The field gradient was calculated based on theory to be approximately 5.76 V/cm(2) for R-phycoerythrin when the applied voltage was 500 V. The effect of EFGF separation channel dimensions was also investigated; a narrower focused band was achieved in a smaller diameter channel. The relationship between the bandwidth and channel diameter is consistent with theory. Three model proteins were resolved in an EFGF channel of this design. The improved device demonstrated 14,000-fold concentration of a protein sample (from 2 ng/mL to 27 microg/mL).

Voltage-controlled separation of proteins by electromobility focusing in a dialysis hollow fiber.

Electromobility focusing (EMF) is a relatively new protein separation technique that utilizes an electric field gradient and a hydrodynamic flow. Proteins are focused in order of electrophoretic mobility at points where their electrophoretic migration velocities balance the hydrodynamic flow velocity. Steady state bands are formed along the separation channel when equilibrium is reached. Further separation and detection can be easily achieved by changing the electric field profile. In this paper. we describe an EMF system with on-line UV absorption detection in which the electric field gradient was formed using a dialysis hollow fiber. Protein focusing and preconcentration were performed with this system. Voltage-controlled separation was demonstrated using bovine serum albumin and myoglobin as model proteins. The limitations of the current method are discussed, and possible solutions are proposed.

Broadband RF impedance spectroscopy in micromachined microfluidic channels.

Impedance spectroscopy in the radio frequency range from 100 MHz to 20 GHz can reveal the dielectric relaxations of biological and chemical solutions. S-parameters for a coplanar waveguide are derived. To perform these measurements, a coplanar waveguide device was fabricated on a conventional FR-4 substrate for fluid interrogation. The microfluidic channel was formed by milling conventional waveguides and laser-cutting channels in the dielectric substrate. Measurements using this device were performed on standards: deionized water, isopropyl alcohol, and air. These measurements were compared to those taken with a conventional dielectric probe. The results demonstrate the ability of the fabricated device to extract varying transmission parameters due to changing sample properties.

Bilinear electric field gradient focusing.

Electric field gradient focusing (EFGF) uses an electric field gradient and a hydrodynamic counter flow to simultaneously separate and focus charged analytes in a channel. Previously, most EFGF devices were designed to form a linear field gradient in the channel. However, the peak capacity obtained using a linear gradient is not much better than what can be obtained using conventional CE. Dynamic improvement of peak capacity in EFGF can be achieved by using a nonlinear gradient. Numerical simulation results indicate that the peak capacity in a 4-cm long channel can be increased from 20 to 150 when changing from a linear to convex bilinear gradient. To demonstrate the increased capacity experimentally, an EFGF device with convex bilinear gradient was fabricated from poly(ethylene glycol) (PEG)-functionalized acrylic copolymers. The desired gradient profile was confirmed by measuring the focusing positions of a standard protein for different counter flow rates at constant voltage. Dynamically controlled elution of analytes was demonstrated using a monolith-filled bilinear EFGF channel. By increasing the flow rate, stacked proteins that were ordered but not resolved after focusing in the steep gradient segment were moved into the shallow gradient segment, where the analyte peak resolution increased significantly. In this way, the nonlinear field gradient was used to realize a dynamic increase in the peak capacity of the EFGF method.

Programed elution and peak profiles in electric field gradient focusing.

Electric field gradient focusing (EFGF) methods have received increased attention in recent years, with potential applications demonstrated by several research groups. In order to move EFGF from the research stage to routine use in application areas, a more detailed understanding of practical aspects of device performance is required. Useful theoretical models for EFGF are available but have not been verified through systematic checks under a variety of conditions. In this paper, we compare modeled and experimental results for an EFGF device with the goal of optimizing the time sequence of voltages applied to the device for maximum resolution of analytes with close electrophoretic mobilities. Measured peak profiles depend strongly on the sequence of voltages applied to the device. We investigate the characteristic behavior of the elution profile under various voltage programs. Rapid voltage drops lead to fast elution of closely spaced protein peaks with narrow widths, whereas a carefully designed voltage program can be used to increase the separation between analytes and achieve higher resolution. Simulated and experimental results demonstrate that the behavior of analyte diffusion at an electric field singularity associated with the transition from the EFGF device to elution capillary can be used to separate analyte peaks which may not be resolved within the EFGF device itself, thereby increasing the achievable resolution of the EFGF technique.

Poly(ethylene glycol)-functionalized devices for electric field gradient focusing.

Electric field gradient focusing (EFGF) is an equilibrium gradient focusing technique that depends on an electric field gradient and a hydrodynamic counterflow to focus, concentrate, and separate charged analytes. In this work, EFGF devices were fabricated from poly(ethylene glycol) (PEG)-functionalized acrylic plastic. The separation channel was formed in an ionically conductive and protein-resistant PEG-functionalized hydrogel, which was cast in a changing cross-sectional cavity in the plastic device. A linear electric field gradient was obtained by applying a voltage lengthwise across the shaped hydrogel. Standard proteins were used as analytes to demonstrate the performance of these EFGF devices. With an increase in counterflow rate or decrease in applied voltage, analyte bands broadened, but resolution increased in agreement with theory. To reduce analyte band dispersion and improve focusing performance, a protein-compatible PEG-functionalized monolith was incorporated in the EFGF channel. Compared with focusing in an open channel, protein bands in the monolith-filled EFGF channel were significantly narrower.

Field gradient electrophoresis.

The class of equilibrium gradient methods utilizes the opposition of two forces, at least one of which changes in magnitude with position, to separate and concentrate analytes. The drawback of many methods of this type is that the production of two opposing forces requires in comparison to standard methods, such as capillary electrophoresis, a relatively complex apparatus. In addition, for techniques such as electric field gradient focusing, hydrodynamic flow leads to Taylor dispersion, which limits the attainable concentration factor. We propose a new method, gradient field electrophoresis, which achieves analyte separation and focusing with only one spatially varying force, an electric field gradient. A model for the method is developed and used to analyze peak capacity. Experimental results for a protein (R-phycoerythrin) are given and compared to the model.