Use of modern three-dimensional imaging models to guide surgical planning for local control of pediatric extracranial solid tumors.

INTRODUCTION: In complex pediatric surgical oncology, surgical planning is contingent upon data gathered from preoperative imaging. Three-dimensional (3D) modeling and printing has been shown to be beneficial for adult presurgical planning, though pediatric literature is less robust. The study reviews our institutional experience with the use of 3D image segmentation and printed models in approaching resection of extracranial solid tumors in children. METHODS: This is a single institutional series from 2021 to 2023. Models were based on computed tomography and magnetic resonance imaging studies, optimized for 3D imaging. The feasibility and creation of the models is reviewed, including specific techniques, software, and printing materials from our institution. Clinical implications for surgical planning are also described, along with detailed preoperative and intraoperative images. RESULTS: 3D modeling and printing was performed for four pediatric patients diagnosed with extracranial solid tumors. Diagnoses included Ewing sarcoma, hepatoblastoma, synovial sarcoma, and osteosarcoma. No intraoperative complications or discrepancies with the preoperative 3D-printed model were noted. No evidence of local recurrence was identified in any patient thus far. CONCLUSION: Our institutional series demonstrates a wide spectrum of clinical application for 3D modeling and printing technology within pediatric surgical oncology. This technology may aid in surgical planning for both resection and reconstruction, can be applied to a diverse breadth of diagnoses, and may potentially augment patient and/or family education about their condition.

Iron-Containing Abdominal Pathologies: Exploiting Magnetic Susceptibility Artifact on Dual-Echo Gradient-Echo Magnetic Resonance Imaging.

A multitude of pathologic entities involve abnormal iron deposition in the abdomen. These lesions demonstrate decreased signal on longer magnetic resonance sequences with longer echo time due to T2* effect. Dual-echo gradient-echo sequences demonstrate increased susceptibility artifact with longer echo sequences. In this article, the spectrum of iron-containing abdominal pathologies is illustrated, with their characteristic distributions. Included is a brief discussion of the physics of magnetic resonance imaging of iron-containing lesions.

Creating Three-dimensional Printed Models of Acetabular Fractures for Use as Educational Tools.

Acetabular fractures are frequently encountered in some clinical practices, and the precise classification of these fractures greatly influences treatments and outcomes. The authors identified the need for an educational aid when teaching acetabular fracture classifications, given the complex spatial anatomy and the nonintuitive classification system that is commonly used. Three-dimensional ( 3D three-dimensional ) printing is an evolving technique that has applications as an educational aid, providing the student with a tangible object to interact with and learn from. In this article, the authors review their experience creating 3D three-dimensional printed models of the hip for educational purposes. Their goal was to create 3D three-dimensional printed models for use as educational aids when teaching acetabular fracture classifications. Complex cases involving a combination of fracture types, subtle nondisplaced fractures, and/or fractures with associated osteopenia or artifacts were excluded. The selected computed tomographic (CT) scans were loaded into a medical 3D three-dimensional volume-rendering program, and a 3D three-dimensional volumetric model was created. Standard Tessellation Language ( STL Standard Tessellation Language ) files were then exported to STL Standard Tessellation Language model-editing software and edited to retain only the involved hemipelvis. In some cases, the proximal femur and ipsilateral hemisacrum may be included to emphasize hip alignment or disruption of the force transfer. Displaced fracture fragments can be printed as separate segments or a single unit after the addition of struts. Printing was performed by using an additive manufacturing principle, with approximately 36-48 hours needed for printing, postprocessing, and drying. The cost to print a 1:1 scale model was approximately $100-$200, depending on the amount of plastic material used. These models can then be painted according to the two-column theory regarding acetabular fractures. ©RSNA, 2017.

Radiology Teaching Files: an Assessment of Their Role and Desired Features Based on a National Survey.

A radiology teaching file (TF) is a system containing a collection of cases with teaching value. Given the wide variety of TF solutions available, we conducted a national survey to better understand the need for TFs, TF features desired by users and their current implementation. A 28-question survey was created which explored TF implementation, utilization, and preferences among respondents. The survey was emailed to residents and faculty throughout the USA, with a request for program coordinators to forward the survey to their departments. The survey was completed by 396 respondents from 115 different institutions. These respondents included 60% residents, 21% attendings (non-program directors), 12% program directors, 5% fellows, and 1% medical students. TFs were assigned to one of three categories: personal TFs, shared in-house TFs, and public TFs. Seventy-six percent of respondents kept a personal TF using a variety of media, and 67% used a shared in-house TF. Of the public TFs used, the most popular were those requiring paid subscriptions. The features respondents valued most provided efficient querying of cases, simulated basic PACS functionality, enabled self-directed learning, and facilitated case submissions. There is a trend toward utilizing electronic media for TFs. The media utilized should be understood and reviewed to ensure PHI is properly secured. Contemporary users demand a high degree of functionality from TF solutions, and use both in-house and commercial products to meet their needs.

Assessment of 1 mSv urinary tract stone CT with model-based iterative reconstruction.

OBJECTIVE: The purpose of this study was to evaluate stone detection, assessment of secondary signs of stone disease, and diagnostic confidence utilizing submillisievert CT with model-based iterative reconstruction (MBIR) in a North American population with diverse body habitus. MATERIALS AND METHODS: Fifty-two adults underwent stone CT using a split-dose protocol; weight-based projected volume CT dose index (CTDIvol) and dose-length product (DLP) were divided into two separate acquisitions at 80% and 20% dose levels. Images were reconstructed with MBIR. Five blinded readers counted stones in three size categories and rated "overall diagnostic confidence" and "detectability of secondary signs of stone disease" on a 0-4 scale at both dose levels. Effective dose (ED) in mSv was calculated as DLP multiplied by conversion coefficient, k, equal to 0.017. RESULTS: Mean ED (80%, 3.90±1.44 mSv; vs 20%, 0.97±0.34 mSv [p<0.001]) and number of stones detected (80%, 193.6±25.0; vs 20%, 154.4±15.4 [p=0.03]) were higher in scans at 80% dose level. Intrareader correlation between scans at 80% and 20% dose levels was excellent (0.83-0.97). With 80% scans as reference standard, mean sensitivity and specificity at 20% varied with stone size (<3 mm, 74% and 77%; ≥3 mm, 92% and 82%). The 20% scans scored lower than 80% scans in diagnostic confidence (2.46±0.50; vs 3.21±0.36 [p<0.005]) and detectability of secondary signs (2.41±0.39; vs 3.19±0.29 [p<0.005]). CONCLUSION: Aggressively dose-reduced (~1 mSv) MBIR scans detected most urinary tract stones of 3 mm or larger but underperformed the low-dose reference standard (3-4 mSv) scans in small (<3 mm) stone detection and diagnostic confidence.

Sonographic twinkling artifact for renal calculus detection: correlation with CT.

PURPOSE: To retrospectively correlate sonographic color Doppler twinkling artifact within the kidneys with unenhanced computed tomography (CT) in the detection of nephrolithiasis. MATERIALS AND METHODS: Institutional review board approval was obtained for this retrospective HIPAA-complaint investigation, and the informed consent requirement was waived. Sonographic imaging reports describing the presence of renal twinkling artifact between January 2008 and September 2009 were identified. Subjects who did not undergo unenhanced abdominal CT within 2 weeks after sonography were excluded. Ultrasound examinations were reviewed by three radiologists working together, and presence, number, location, and size of renal twinkling artifacts were documented by consensus opinion. Sonographic findings were correlated with unenhanced CT (5-mm section width, no overlap) for nephrolithiasis and other causes of twinkling artifact. The number, location, and size of renal calculi at CT were documented. RESULTS: The presence of sonographic renal twinkling artifact, in general, had a 78% (95% confidence interval: 0.66, 0.90) positive predictive value for nephrolithiasis anywhere in the kidneys at CT. The true-positive rate of twinkling artifact for confirmed calculi at CT was 49% (73 of 148 twinkling foci), while the false-positive rate was 51% (75 of 148 twinkling foci). The overall sensitivity of twinkling artifact for the detection of specific individual renal calculi observed at CT was 55% (95% confidence interval: 0.47, 0.64). CONCLUSION: While renal twinkling artifact is commonly associated with nephrolithiasis, this finding is relatively insensitive in routine clinical practice and has a high false-positive rate when 5-mm unenhanced CT images are used as the reference standard. SUPPLEMENTAL MATERIAL: http://radiology.rsna.org/lookup/suppl/doi:10.1148/radiol.11102128/-/DC1.

Conjoined twins: an obstetrician's guide to prenatal care and delivery management.

OBJECTIVE: Obstetricians infrequently encounter conjoined twins. Much of the clinical care literature focuses on postnatal management from a neonatology and pediatric surgery perspective; guidance on obstetrical management is limited. We outline steps for prenatal evaluation, obstetrical care, and delivery planning. STUDY DESIGN: Experiences with two cases of conjoined twins. RESULTS: We identified several points throughout the planning, delivery, and postnatal process that are important to highlight for optimizing clinical outcome, patient safety, and parental satisfaction. CONCLUSION: After diagnosis, patients should be referred to a center experienced in the management of conjoined twins. Specialists in fields including maternal fetal medicine, pediatric surgery, neonatology, and radiology play a vital role in the management of these patients. Early referral allows for timely family counseling and decision-making. Prenatal evaluation beyond the first trimester should include a detailed ultrasound, fetal echocardiogram, and fetal MRI. 3D printed life-sized models can improve delivery planning and patient understanding.

Interventional Planning for Endovascular Revision of a Lateral Tunnel Fontan: A Patient-Specific Computational Analysis.

INTRODUCTION: A 2-year-old female with hypoplastic left heart syndrome (HLHS)-variant, a complex congenital heart defect (CHD) characterized by the underdevelopment of the left ventricle, presented with complications following single ventricle palliation. Diagnostic work-up revealed elevated Fontan pathway pressures, as well as significant dilation of the inferior Fontan pathway with inefficient swirling flow and hepatic venous reflux. Due to the frail condition of the patient, the clinical team considered an endovascular revision of the Fontan pathway. In this work, we performed a computational fluid dynamics (CFD) analysis informed by data on anatomy, flow, and pressure to investigate the hemodynamic effect of the endovascular Fontan revision. METHODS: A patient-specific anatomical model of the Fontan pathway was constructed from magnetic resonance imaging (MRI) data using the cardiovascular modeling software CardiovasculaR Integrated Modeling and SimulatiON (CRIMSON). We first created and calibrated a pre-intervention 3D-0D multi-scale model of the patient's circulation using fluid-structure interaction (FSI) analyses and custom lumped parameter models (LPMs), including the Fontan pathway, the single ventricle, arterial and venous systemic, and pulmonary circulations. Model parameters were iteratively tuned until simulation results matched clinical data on flow and pressure. Following calibration of the pre-intervention model, a custom bifurcated endograft was introduced into the anatomical model to virtually assess post-intervention hemodynamics. RESULTS: The pre-intervention model successfully reproduced the clinical hemodynamic data on regional flow splits, pressures, and hepatic venous reflux. The proposed endovascular repair model revealed increases of mean and pulse pressure at the inferior vena cava (IVC) of 6 and 29%, respectively. Inflows at the superior vena cava (SVC) and IVC were each reduced by 5%, whereas outflows at the left pulmonary artery (LPA) and right pulmonary artery (RPA) increased by 4%. Hepatic venous reflux increased by 6%. CONCLUSION: Our computational analysis indicated that the proposed endovascular revision would lead to unfavorable hemodynamic conditions. For these reasons, the clinical team decided to forgo the proposed endovascular repair and to reassess the management of this patient. This study confirms the relevance of CFD modeling as a beneficial tool in surgical planning for single ventricle CHD patients.

Value of delayed hypointensity and delayed enhancing rim in magnetic resonance imaging diagnosis of small hepatocellular carcinoma in the cirrhotic liver.

PURPOSE: To determine the diagnostic utility of delayed hypointensity and delayed enhancing rim on magnetic resonance imaging (MRI) as indicators of hepatocellular carcinoma (HCC) in arterially enhancing nodules < or =5 cm in the cirrhotic liver and determine the features that best predict HCC. MATERIALS AND METHODS: Gadolinium-enhanced MRI studies performed from January 2001 to December 2004 in patients with cirrhosis were evaluated for arterially enhancing nodules measuring < or =5 cm. Verification was via explant correlation, biopsy, or imaging follow-up. Sensitivity and specificity of diagnostic features of HCC were calculated. Features predictive of HCC were determined using the Generalized Estimating Equation approach. RESULTS: In all, 116 arterially enhancing nodules were identified in 80 patients (<2 cm: n = 79, 2-5 cm n = 37). Sensitivity and specificity of delayed hypointensity for HCC measuring < or =5 cm, 2-5 cm, and <2 cm were 0.54 (40 of 74) and 0.86 (36 of 42); 0.72 (23 of 32) and 0.80 (4 of 5); and 0.41 (17 of 42) and 0.87 (32 of 37). For the delayed enhancing rim sensitivity and specificity were 0.64 (47 of 74) and 0.86 (36 of 42); 0.75 (24 of 32) and 1.0 (5 of 5); and 0.55 (23 of 42) and 0.83 (31 of 37), respectively. Lesion size (> or =2 cm) and delayed enhancing rim, as main features and their interaction, were the most significant predictors of HCC. CONCLUSION: Delayed hypointensity and enhancing rim improve the specificity of diagnosis of HCC of all sizes but are seen less frequently in small (<2 cm) HCC. Nodule size (> or =2 cm) and delayed enhancing rim are the strongest predictors of HCC.

Use of 3D Printed Models to Create Molds for Shaping Implants for Surgical Repair of Orbital Fractures.

RATIONALE AND OBJECTIVES: Surgical repair of an isolated orbital fracture requires anatomically accurate implant shape and placement. We describe a three-dimensional (3D) printing technique to customize the shape of commercially available absorbable implants. MATERIALS AND METHODS: We reviewed our early experience with three cases in which 3D printed molds were utilized for fracture repair. The institution's medical records were reviewed to assess operative time for orbital floor blow-out fracture repairs. Thin section computed tomography (CT) images were loaded into a clinical 3D visualization software, and stereolithography models were created. The models were loaded into stereolithography editing software in which the nonfractured side was mirrored and overlaid with the fractured side. Sterilizable 3D printed molds were created using the fracture images as well as the virtual mirrored images. The molds were taken to the operating room and used to shape a customized orbital implant for fracture repair, using off-the-shelf bioabsorbable implants. RESULTS: The three patients treated using 3D printed molds had excellent outcomes, with decreased postoperative edema and rapid resolution of ocular misalignment/strabismus. Surgical times were decreased from an average of 93.3 minutes using standard implants to 48.3 minutes following adoption of 3D printed molds. CONCLUSION: Three-dimensional printed models can be used to create molds for shaping bioabsorbable implants for customized surgical repair, improving fit, reducing tissue handling and postoperative edema, and reducing surgical times.

Three-Dimensional Printing Facilitates Creation of a Biliary Endoscopy Phantom for Interventional Radiology-Operated Endoscopy Training.

PURPOSE: To create a three-dimensional endoscopic model of the biliary tract from magnetic-resonance cholangiopancreatography imaging and to evaluate its effectiveness as a tool for training in endoscopic biliary interventions. MATERIALS AND METHODS: A magnetic-resonance cholangiopancreatography study was performed on a patient with biliary obstruction secondary to a distal bile duct cholangiocarcinoma. Using Vitrea, a three-dimensional volume-rendered image was created, and exported as a standard tessellated language file. The standard tessellated language model was then edited with MeshMixer. Three cylindrical entry ports were created. The ports were aligned and overlapped with the dominant ducts in three separate areas of the model and fused to the model. A 0.2 cm shell was created around the model and the model was hollowed. The ends of the ports were cut off, allowing access to the hollowed-out model. The model was printed at 125% scale to allow easy access with a 9.5-French (≤3.23 mm) endoscope. The model was printed using a Stratasys Dimension Elite Plus printer. After printing, the model was post-processed to remove support materials. A 10-question survey was administered to all trainees before and after use of the printed phantom to practice endoscopy skills. RESULTS: 11 trainees participated in the three-dimensional endoscopy simulation with most of the trainees (73%) having no prior formal endoscopy training. Using a 10-point Likert scale, the mean comfort-level of the trainees to use endoscopy alone for cholecystostomy, percutaneous biliary drainage, percutaneous nephrostomy, and percutaneous gastrostomy increased by 38.9%, 32.8%, 32.8%, and 34.3%, respectively, following the training experience. CONCLUSION: The use of a three-dimensionally printed endoscopic model as a simulation tool has the potential to improve trainee comfort using endoscopy during interventional radiology procedures.

Do radiology and other health care presentations posted on the Internet contain accessible protected health information?

PURPOSE: To determine the prevalence of protected health information (PHI) in PowerPoint presentations available for downloading from the Internet. MATERIALS AND METHODS: No institutional review board approval was needed for this project, which involved no patient subjects. Two Google searches, each limited to PowerPoint files, were performed by using the criteria "Cardiac CT" and "Magnetic Resonance Imaging." The first 100 hits of each search were downloaded from the source Web site. The presentations were examined for the PHI contained on any images, links, or notes pages. RESULTS: Two hundred presentations were evaluated. There were 143 presentations with images, image links, or notes, and 52 (36%) of these contained PHI. There were 129 presentations containing radiologic images; 51 (40%) of these contained PHI, and 31 (24%) showed the patient's name. At least 132 (66%) of the 200 presentations originated from the United States. Thirty-five (37%) of 94 presentations with images, image links, or notes contained PHI. Eighty-six U.S. presentations contained radiologic images; 34 (40%) of these contained PHI, and 19 (22%) showed the patient's name. CONCLUSION: Online or other distributions of PowerPoint presentations that contain radiologic images often contain PHI, and this may violate laws, including the U.S. Health Insurance Portability and Accountability Act.

Possible biliary disease: diagnostic performance of high-spatial-resolution isotropic 3D T2-weighted MRCP.

PURPOSE: To retrospectively assess the diagnostic performance of magnetic resonance cholangiopancreatography (MRCP) performed by using a high-spatial-resolution isotropic three-dimensional (3D) fast-recovery fast spin-echo (FSE) sequence with parallel imaging for the evaluation of possible biliary disease. MATERIALS AND METHODS: This HIPAA-compliant study was approved by the institutional review board; informed consent was waived. Ninety-five patients (58 female, 37 male; mean age, 51 years; range, 15-91 years) underwent MRCP by using the respiratory-triggered isotropic 3D fast-recovery FSE sequence and endoscopic or percutaneous direct visualization between March 2003 and June 2007. Two independent readers evaluated the MRCP images for strictures, dilatation, and intraductal filling defects. Sensitivity, specificity, and interobserver agreement (kappa statistics) were determined. RESULTS: The respective sensitivity and specificity for strictures, dilatation, and intraductal filling defects (all choledocholithiasis) were 86% (40 of 47) and 94% (45 of 48), 98% (57 of 58) and 100% (37 of 37), and 68% (19 of 28) and 97% (65 of 67) for reader 1 and 88% (41 of 47) and 94% (45 of 48), 96% (56 of 58) and 100% (37 of 37), and 75% (21 of 28) and 99% (66 of 67) for reader 2. The sensitivity for stones larger than 3 mm was 94% (15 of 16) for reader 1 and 100% (16 of 16) for reader 2, whereas the sensitivity for stones 3 mm or smaller was 33% (four of 12) for reader 1 and 42% (five of 12) for reader 2. Agreement between readers was good to excellent, with kappa values of 0.76, 0.85, and 0.98 for strictures, dilatation, and choledocholithiasis, respectively. CONCLUSION: MRCP by using the respiratory-triggered isotropic 3D fast-recovery FSE sequence with parallel imaging demonstrates excellent diagnostic capabilities for possible biliary disease, although it is limited for stones 3 mm or smaller in size.

Stress urinary incontinence: relative importance of urethral support and urethral closure pressure.

PURPOSE: Treatment strategies for stress incontinence are based on the concept that urethral mobility is the predominant causal factor with sphincter function a secondary contributor. To our knowledge the relative importance of these 2 factors has not been assessed in properly controlled studies. MATERIALS AND METHODS: The Research on Stress Incontinence Etiology project is a case-control study that compared 103 women with stress incontinence and 108 asymptomatic controls in groups matched for age, race, parity and hysterectomy. Urethral closure pressure, urethral and pelvic organ support, levator ani muscle function and intravesical pressure were measured and analyzed using logistic regression and multivariable modeling. RESULTS: Mean +/- SD maximal urethral closure pressure was 42% lower in cases (40.8 +/- 17.1 vs 70.2 +/- 22.4 cm H(2)O, d = 1.47). Lesser effect sizes were seen for support parameters, including resting urethral axis and urethrovaginal support (d = 0.41 and 0.50, respectively). Other pelvic floor parameters, including genital hiatus size and urethral axis during muscle contraction (d = 0.60 and 0.58, respectively), differed but levator strength and levator defect status did not. Maximum cough pressure, which is an assessment of stress on the continence mechanism, was also different (d = 0.43). After adjusting for body mass index the maximal urethral closure pressure alone correctly classified 50% of cases. Adding the best predictors for urethrovaginal support and cough strength to the model added 11% of predictive ability. CONCLUSIONS: The finding that maximal urethral closure pressure and not urethral support is the factor most strongly associated with stress incontinence implies that improving urethral function may have therapeutic promise.

Imaging in gastric anisakiasis.

Gastrointestinal anisakiasis is an uncommon zoonotic parasitic infection caused by consumption of raw or undercooked seafood infected with nematodes of genus Anisakis. Given the non-specific clinical presentation of acute abdomen, nausea, and vomiting these patients are often subject to radiologic imaging. We present ultrasound and computed tomography imaging features in a case of gastric anisakiasis demonstrating characteristic features of diffuse gastric submucosal edema, perigastric stranding and trace ascites that helped to further elaborate the clinical history of uncooked fish consumption prompting timely endoscopic diagnosis and management.

Diagnostic accuracy of MDCT in differentiating gallbladder cancer from acute and xanthogranulomatous cholecystitis.

OBJECTIVE: To determine the diagnostic accuracy of multi-detector CT (MDCT) for differentiating gallbladder cancer from acute and xanthogranulomatous cholecystitis using previously described imaging features. METHODS: In this IRB approved HIPAA-compliant retrospective cohort study, contrast-enhanced MDCT of histologically confirmed acute cholecystitis (n = 17), xanthogranulomatous cholecystitis (n = 25), and gallbladder cancer (n = 18) were reviewed independently by three abdominal radiologists blinded to outcome. The primary outcome was the diagnostic accuracy of MDCT for the differentiation of gallbladder cancer from cholecystitis (acute and xanthogranulomatous) using various imaging parameters. Kappa (κ) statistics and two-way mixed-model single-measure intra-class correlation statistics (ICC) were calculated for each imaging feature and the final radiologic diagnosis. RESULTS: Inter-rater agreement was moderate to substantial (κ = 0.43-0.70), sensitivity 0.67-0.78, specificity 0.22-0.33 and the positive likelihood ratio was 4.28-8.56 for the differentiation of gallbladder cancer from benign gallbladder pathology. Only three imaging findings: disrupted gallbladder mucosa (κ = 0.68), intraluminal gallstones (κ = 0.66), and gallbladder wall thickness (ICC = 0.63) had substantial inter-rater agreement. The following had slight or no agreement: intramural hypoattenuating nodules (κ = 0.17), transient hepatic attenuation differences (κ = 0.14), gallbladder wall calcification (κ = -0.01), gallbladder wall enhancement (κ = 0.18), and omental or mesenteric invasion (κ = 0.08). In the final multivariate model, the following were significant predictors useful in making or excluding diagnosis of gallbladder cancer: focal gallbladder wall thickening (p = 0.003, OR: 13.09 [95% CI: 2.40-71.48]), pericholecystic "fat stranding" (p = 0.018, OR: 0.10 [95% CI: 0.01-0.66]), and maximum short axis lymph node diameter (p = 0.043, OR: 1.18 [95% CI: 1.00-1.38]). CONCLUSION: MDCT has moderate sensitivity, poor specificity, and moderate-to-substantial inter-rater repeatability for the differentiation of gallbladder cancer from acute and xanthogranulomatous cholecystitis.

MRI of sonographically indeterminate adnexal masses.

OBJECTIVE: The purpose of this study was to assess the ability of MRI to characterize sonographically indeterminate adnexal masses and to define the sonographic features contributing to indeterminate diagnoses. MATERIALS AND METHODS: Two blinded radiologists retrospectively reviewed the MRI examinations of 87 patients with 95 sonographically indeterminate adnexal masses. Reviewers determined the origin of a mass, its tissue content (cystic, solid, complex cystic, or cystic and solid), tissue characteristics (fat, blood, fibrous, or leiomyomatous), and benignity versus malignancy. Sonograms were reviewed by three reviewers to determine the origin of a mass, its tissue content, and reasons for an indeterminate diagnosis. Sensitivity and specificity of MRI were calculated, and agreement of sonography and MRI with the final diagnosis was determined using kappa statistics. The final diagnosis was determined by histopathology, surgical findings, or imaging or clinical follow-up. RESULTS: The sensitivity of MRI for identifying malignancy (n = 5) was 100% and its specificity for benignity (n = 90) was 94%. Excellent agreement was seen between MRI and the final diagnosis for determining the origin (kappa = 0.93), tissue content (kappa = 0.98), and tissue characteristics (kappa = 0.91) of a mass. Sonography had poor agreement with the final diagnosis for the origin (kappa = 0.19) and tissue content (kappa = 0.33) of a mass. The main reasons for indeterminate sonographic diagnoses were the inability to determine origin because of location and large mass size and the appearances of purely solid or complex cystic masses. CONCLUSION: Sonographically indeterminate adnexal masses of uncertain origin and solid or complex cystic content benefit from further evaluation with MRI, which is highly accurate for identifying the origin of a mass and characterizing its tissue content, obviating surgery.

What the Patient Wants: An Analysis of Radiology-Related Inquiries From a Web-Based Patient Portal.

PURPOSE: With the development of patient portals, the opportunity exists to identify gaps in practice by analyzing priorities patients place on the receipt and comprehension of radiology reports. Our purpose was to describe the nature of radiology-specific patient information requests by analysis of patient-initiated messages submitted through a web-based electronic patient portal. METHODS: Institutional review board approval was obtained and informed consent waived for this HIPAA-compliant retrospective cross-sectional study. All patient-initiated messages submitted to the web-based patient portal at a large academic medical center between October 1, 2014 and December 11, 2014 were analyzed. Messages containing radiology-specific key terms including "x-ray," "xray," "xr," "ct," "cat," "mri," "scan," "ultrasound," "image," and "radiology" were identified and messages categorized by content. The demographics of message writers were also analyzed. Diagnostic imaging studies performed during this period were tabulated by modality. Proportions were compared with χ2 tests. RESULTS: During the time period studied, there were 1,597 messages from 1,489 patients inquiring about 1,609 examinations. Messages containing ≥1 radiology-specific keyword were significantly more likely to originate from women than from men (64% [946/1,489] versus 36% [543/1,489], P < .0001), with 53% of studies (52,322/98,897) performed on female patients and 47% (46,575/98,897) on male patients. The relative percentages of modality-specific patient inquiries were significantly discrepant (P < .001) from actual scan volume for some modalities (MRI: 38% [607/1,609] versus 11% [11,152/98,897], CT: 25% [400/1,609] versus 19% [19,032/98,897], plain radiography: 23% [368/1,609] versus 55% [54,497/98,897]). The most common inquiry was for imaging results (33% [521/1,597], P < .001); these were submitted a median of 5 days (range: 0-368 days) after imaging. The radiology turnaround time (between exam completion in the Radiology Information System and signoff on report) was 5 hours, versus 70 hours for referring provider review. Inquiries about radiation dose or radiation risk represented 0.1% (2/1,597) of all inquiries. CONCLUSION: Patients submitting radiology-specific messages through an electronic patient portal are most concerned about imaging results, particularly those pertaining to advanced (CT and MRI) imaging studies.

Magnetic resonance imaging and 3-dimensional analysis of external anal sphincter anatomy.

OBJECTIVE: To use magnetic resonance images of living women and 3-dimensional modeling software to identify the component parts and characteristic features of the external anal sphincter (EAS) that have visible separation or varying origins and insertions. METHODS: Detailed structural analysis of anal sphincter anatomy was performed on 3 pelvic magnetic resonance imaging (MRI) data sets selected for image clarity from ongoing studies involving nulliparous women. The relationships of anal sphincter structures seen in axial, sagittal, and coronal planes were examined using the 3-D Slicer 2.1b1 software program. The following were requirements for sphincter elements to be considered separate: 1) a clear and consistently visible separation or 2) a different origin or insertion. The characteristic features identified in this way were then evaluated in images from an additional 50 nulliparas for the frequency of feature visibility. RESULTS: There were 3 components of the EAS that met criteria as being "separate" structures. The main body (EAS-M) is separated from the subcutaneous external anal sphincter (SQ-EAS) by a clear division that could be observed in all (100%) of the MRI scans reviewed. The wing-shaped end (EAS-W) has fibers that do not cross the midline ventrally, but have lateral origins near the ischiopubic ramus. This EAS-W component was visible in 76% of the nulliparas reviewed. CONCLUSION: Three distinct external anal sphincter components can be identified by MRI in the majority of nulliparous women.