RESUMO
Discovered in the 1920s, cytochrome bd is a terminal oxidase that has received renewed attention as a drug target since its atomic structure was first determined in 2016. Only found in prokaryotes, we study it here as a drug target for Mycobacterium tuberculosis (Mtb). Most previous drug discovery efforts toward cytochrome bd have involved analogues of the canonical substrate quinone, known as Aurachin D. Here, we report six new cytochrome bd inhibitor scaffolds determined from a computational screen and confirmed on target activity through in vitro testing. These scaffolds provide new avenues for lead optimization toward Mtb therapeutics.
Assuntos
Antituberculosos , Inibidores Enzimáticos , Mycobacterium tuberculosis , Mycobacterium tuberculosis/enzimologia , Mycobacterium tuberculosis/efeitos dos fármacos , Antituberculosos/farmacologia , Antituberculosos/química , Inibidores Enzimáticos/farmacologia , Inibidores Enzimáticos/química , Tuberculose/tratamento farmacológico , Oxirredutases/antagonistas & inibidores , Oxirredutases/metabolismo , Oxirredutases/química , Modelos Moleculares , Simulação de Acoplamento MolecularRESUMO
AmberTools is a free and open-source collection of programs used to set up, run, and analyze molecular simulations. The newer features contained within AmberTools23 are briefly described in this Application note.
RESUMO
Our previous article has established the theory of molecular dynamics (MD) simulations for systems modeled with the polarizable Gaussian multipole (pGM) electrostatics [Wei et al., J. Chem. Phys. 153(11), 114116 (2020)]. Specifically, we proposed the covalent basis vector framework to define the permanent multipoles and derived closed-form energy and force expressions to facilitate an efficient implementation of pGM electrostatics. In this study, we move forward to derive the pGM internal stress tensor for constant pressure MD simulations with the pGM electrostatics. Three different formulations are presented for the flexible, rigid, and short-range screened systems, respectively. The analytical formulations were implemented in the SANDER program in the Amber package and were first validated with the finite-difference method for two different boxes of pGM water molecules. This is followed by a constant temperature and constant pressure MD simulation for a box of 512 pGM water molecules. Our results show that the simulation system stabilized at a physically reasonable state and maintained the balance with the externally applied pressure. In addition, several fundamental differences were observed between the pGM and classic point charge models in terms of the simulation behaviors, indicating more extensive parameterization is necessary to utilize the pGM electrostatics.
RESUMO
Molecular dynamics simulations of biomolecules have been widely adopted in biomedical studies. As classical point-charge models continue to be used in routine biomolecular applications, there have been growing demands on developing polarizable force fields for handling more complicated biomolecular processes. Here, we focus on a recently proposed polarizable Gaussian Multipole (pGM) model for biomolecular simulations. A key benefit of pGM is its screening of all short-range electrostatic interactions in a physically consistent manner, which is critical for stable charge-fitting and is needed to reproduce molecular anisotropy. Another advantage of pGM is that each atom's multipoles are represented by a single Gaussian function or its derivatives, allowing for more efficient electrostatics than other Gaussian-based models. In this study, we present an efficient formulation for the pGM model defined with respect to a local frame formed with a set of covalent basis vectors. The covalent basis vectors are chosen to be along each atom's covalent bonding directions. The new local frame can better accommodate the fact that permanent dipoles are primarily aligned along covalent bonds due to the differences in electronegativity of bonded atoms. It also allows molecular flexibility during molecular simulations and facilitates an efficient formulation of analytical electrostatic forces without explicit torque computation. Subsequent numerical tests show that analytical atomic forces agree excellently with numerical finite-difference forces for the tested system. Finally, the new pGM electrostatics algorithm is interfaced with the particle mesh Ewald (PME) implementation in Amber for molecular simulations under the periodic boundary conditions. To validate the overall pGM/PME electrostatics, we conducted an NVE simulation for a small water box of 512 water molecules. Our results show that to achieve energy conservation in the polarizable model, it is important to ensure enough accuracy on both PME and induction iteration. It is hoped that the reformulated pGM model will facilitate the development of future force fields based on the pGM electrostatics for applications in biomolecular systems and processes where polarization plays crucial roles.
Assuntos
Substâncias Macromoleculares/química , Simulação de Dinâmica Molecular , Modelos Químicos , Eletricidade EstáticaRESUMO
Immersed interface method (IIM) is a promising high-accuracy numerical scheme for the Poisson-Boltzmann model that has been widely used to study electrostatic interactions in biomolecules. However, the IIM suffers from instability and slow convergence for typical applications. In this study, we introduced both analytical interface and surface regulation into IIM to address these issues. The analytical interface setup leads to better accuracy and its convergence closely follows a quadratic manner as predicted by theory. The surface regulation further speeds up the convergence for nontrivial biomolecules. In addition, uncertainties of the numerical energies for tested systems are also reduced by about half. More interestingly, the analytical setup significantly improves the linear solver efficiency and stability by generating more precise and better-conditioned linear systems. Finally, we implemented the bottleneck linear system solver on GPUs to further improve the efficiency of the method, so it can be widely used for practical biomolecular applications. © 2019 Wiley Periodicals, Inc.
Assuntos
Biologia Computacional , Proteínas/metabolismo , Água/metabolismo , Algoritmos , Teoria da Densidade Funcional , Simulação de Dinâmica Molecular , Proteínas/química , Eletricidade Estática , Propriedades de Superfície , Água/químicaRESUMO
Steroids are one of the most widely used groups of medicines presently. There are some steroid drugs that have acquired with the transformation of microorganism. It's indispensability to screen the strain that is able to utilize steroids to generate new products. This study has screened a transformation strain WHX1301 that have ability to convert cholesterol. Based on the 16S rRNA gene sequence comparison, the isolate WHX1301 has been demonstrated to most similar as Streptomyces cellulosae. Separation and purification of transformation product were identifying by NMR and ESI-MS. The major of product was 2,7-dihydroxycholesterol, and the by-product were 7-Hydroxycholestane-3,5-diene, Cholesterane-3,5-diene. Fortunately, 2,7-dihydroxycholesterol has inhibitory activity against xanthine oxidase with a 34.8% inhibition rate at a concentration of 20 µg/ml. Using the resting cells of Streptomyces cellulosae WHX1301 to transform cholesterol, the product yield can reach 76%. Present paper is the first report regarding the microbial transformation of steroids by Streptomyces cellulosae.
RESUMO
Molecular surfaces play a pivotal role in elucidating the properties and functions of biological complexes. While various surfaces have been proposed for specific scenarios, their widespread adoption faces challenges due to limited efficiency stemming from hand-crafted modeling designs. In this work, we proposed a general framework that incorporates both the point cloud concept and neural networks. The use of matrix multiplication in this framework enables efficient implementation across diverse platforms and libraries. We applied this framework to develop the GENIUSES (Grid-robust Efficient Neural Interface for Universal Solvent-Excluded Surface) model for constructing SES. GENIUSES demonstrates high accuracy and efficiency across data sets with varying conformations and complexities. Compared to the classical implementation of SES in the AMBER software package, our framework achieved a 26-fold speedup while retaining â¼95% accuracy when ported to the GPU platform using CUDA. Greater speedups can be obtained in large-scale systems. Importantly, our model exhibits robustness against variations in the grid spacing. We have integrated this infrastructure into AMBER to enhance accessibility for research in drug screening and related fields, where efficiency is of paramount importance.
RESUMO
Induced dipole models have proven to be effective tools for simulating electronic polarization effects in biochemical processes, yet their potential has been constrained by energy conservation issue, particularly when historical data is utilized for dipole prediction. This study identifies error outliers as the primary factor causing this failure of energy conservation and proposes a comprehensive scheme to overcome this limitation. Leveraging maximum relative errors as a convergence metric, our data demonstrates that energy conservation can be upheld even when using historical information for dipole predictions. Our study introduces the multi-order extrapolation method to quicken induction iteration and optimize the use of historical data, while also developing the preconditioned conjugate gradient with local iterations to refine the iteration process and effectively remove error outliers. This scheme further incorporates a "peek" step via Jacobi under-relaxation for optimal performance. Simulation evidence suggests that our proposed scheme can achieve energy convergence akin to that of point-charge models within a limited number of iterations, thus promising significant improvements in efficiency and accuracy.
RESUMO
A key advantage of polarizable force fields is their ability to model the atomic polarization effects that play key roles in the atomic many-body interactions. In this work, we assessed the accuracy of the recently developed polarizable Gaussian Multipole (pGM) models in reproducing quantum mechanical (QM) interaction energies, many-body interaction energies, as well as the nonadditive and additive contributions to the many-body interactions for peptide main-chain hydrogen-bonding conformers, using glycine dipeptide oligomers as the model systems. Two types of pGM models were considered, including that with (pGM-perm) and without (pGM-ind) permanent atomic dipoles. The performances of the pGM models were compared with several widely used force fields, including two polarizable (Amoeba13 and ff12pol) and three additive (ff19SB, ff15ipq, and ff03) force fields. Encouragingly, the pGM models outperform all other force fields in terms of reproducing QM interaction energies, many-body interaction energies, as well as the nonadditive and additive contributions to the many-body interactions, as measured by the root-mean-square errors (RMSEs) and mean absolute errors (MAEs). Furthermore, we tested the robustness of the pGM models against polarizability parameterization errors by employing alternative polarizabilities that are either scaled or obtained from other force fields. The results show that the pGM models with alternative polarizabilities exhibit improved accuracy in reproducing QM many-body interaction energies as well as the nonadditive and additive contributions compared with other polarizable force fields, suggesting that the pGM models are robust against the errors in polarizability parameterizations. This work shows that the pGM models are capable of accurately modeling polarization effects and have the potential to serve as templates for developing next-generation polarizable force fields for modeling various biological systems.
Assuntos
Peptídeos , Reprodução , Dipeptídeos , Glicina , HidrogênioRESUMO
Molecular modeling at the atomic level has been applied in a wide range of biological systems. The widely adopted additive force fields typically use fixed atom-centered partial charges to model electrostatic interactions. However, the additive force fields cannot accurately model polarization effects, leading to unrealistic simulations in polarization-sensitive processes. Numerous efforts have been invested in developing induced dipole-based polarizable force fields. Whether additive atomic charge models or polarizable induced dipole models are used, proper parameterization of the electrostatic term plays a key role in the force field developments. In this work, we present a Python program called PyRESP for performing atomic multipole parameterizations by reproducing ab initio electrostatic potential (ESP) around molecules. PyRESP provides parameterization schemes for several electrostatic models, including the RESP model with atomic charges for the additive force fields and the RESP-ind and RESP-perm models with additional induced and permanent dipole moments for the polarizable force fields. PyRESP is a flexible and user-friendly program that can accommodate various needs during force field parameterizations for molecular modeling of any organic molecules.
Assuntos
Eletricidade Estática , Modelos MolecularesRESUMO
Implicit solvent models, such as Poisson-Boltzmann models, play important roles in computational studies of biomolecules. A vital step in almost all implicit solvent models is to determine the solvent-solute interface, and the solvent excluded surface (SES) is the most widely used interface definition in these models. However, classical algorithms used for computing SES are geometry-based, so that they are neither suitable for parallel implementations nor convenient for obtaining surface derivatives. To address the limitations, we explored a machine learning strategy to obtain a level set formulation for the SES. The training process was conducted in three steps, eventually leading to a model with over 95% agreement with the classical SES. Visualization of tested molecular surfaces shows that the machine-learned SES overlaps with the classical SES in almost all situations. Further analyses show that the machine-learned SES is incredibly stable in terms of rotational variation of tested molecules. Our timing analysis shows that the machine-learned SES is roughly 2.5 times as efficient as the classical SES routine implemented in Amber/PBSA on a tested central processing unit (CPU) platform. We expect further performance gain on massively parallel platforms such as graphics processing units (GPUs) given the ease in converting the machine-learned SES to a parallel procedure. We also implemented the machine-learned SES into the Amber/PBSA program to study its performance on reaction field energy calculation. The analysis shows that the two sets of reaction field energies are highly consistent with a 1% deviation on average. Given its level set formulation, we expect the machine-learned SES to be applied in molecular simulations that require either surface derivatives or high efficiency on parallel computing platforms.
RESUMO
Implicit solvent models based on the Poisson-Boltzmann equation (PBE) have been widely used to study electrostatic interactions in biophysical processes. These models often treat the solvent and solute regions as high and low dielectric continua, leading to a large jump in dielectrics across the molecular surface which is difficult to handle. Higher order interface schemes are often needed to seek higher accuracy for PBE applications. However, these methods are usually very liberal in the use of grid points nearby the molecular surface, making them difficult to use on high-performance computing platforms. Alternatively, the harmonic average (HA) method has been used to approximate dielectric interface conditions near the molecular surface with surprisingly good convergence and is well suited for high-performance computing. By adopting a 7-point stencil, the HA method is advantageous in generating simple 7-banded coefficient matrices, which greatly facilitate linear system solution with dense data parallelism, on high-performance computing platforms such as a graphics processing unit (GPU). However, the HA method is limited due to its lower accuracy. Therefore, it would be of great interest for high-performance applications to develop more accurate methods while retaining the simplicity and effectiveness of the 7-point stencil discretization scheme. In this study, we have developed two new algorithms based on the spirit of the HA method by introducing more physical interface relations and imposing the discretized Poisson's equation to the second order, respectively. Our testing shows that, for typical biomolecules, the new methods significantly improve the numerical accuracy to that comparable to the second-order solvers and with â¼65% overall efficiency gain on widely available high-performance GPU platforms.