Functional Surfactant-Induced Long-Range Compressive Strain in Curved Ultrathin Nanodendrites Boosts Electrocatalysis.

Curved ultrathin PtPd nanodendrites (CNDs) with long-range compressive strain and highly branched feature are first prepared by a functional surfactant-induced strategy. Precise synthesis realized the construction of both curved and flat PtPd nanodendrites (NDs) with the same atomic ratio, which contributed to exploration of the strain effect on electrocatalytic performance alone. Abundant evidence is provided to confirm that the long-range compressive strain in curved PtPd architectures can effectively tailor the local coordination environment of active sites, lower the position of the d-band center, weaken the adsorption energy of the intermediates (e.g., H* and CO*), and ultimately increase their intrinsic activity. The density functional theory (DFT) calculations further reveal that the introduction of compressive strain weakens the Gibbs free-energy of the intermediate (ΔGH*), which is favorable for accelerating the hydrogen evolution reaction (HER) kinetics. A similar enhanced electrocatalytic performance can also be found in the methanol oxidation reaction (MOR).

Beagle dog 90-day oral toxicity study of a novel coccidiostat - ethanamizuril.

BACKGROUND: Triazine coccidiostats are widely used in chickens and turkeys for coccidiosis control. Ethanamizuril is a novel triazine compound that exhibits anticoccidial activity in poultry. This study was designed to evaluate the subchronic toxicity of ethanamizuril in beagle dogs at doses of 12, 60 or 300 mg/kg/day in diet for 90 days. RESULTS: Ethanamizuril was well tolerated at low and middle dosages in beagle dogs, and no drug-related toxical effects were observaed in terms of survival, clinical observations, organs weight and damage in these dose groups. However, in high dose administration group, food consumption and histologic changes in kidneys were noticed in both sexes of beagle dog, although the renal lesions were finally resolved at the end of 4 weeks exposure of ethanamizuril. CONCLUSIONS: No-observed-adverse-effect level (NOAEL) was considered for ethanamizuril at dose of 60 mg/kg/day in Beagle dog. This result added toxicity effects of ethanamizuril to the safety database, which might guide safely using of ethanamizuril as a novel coccidiostat.

Virus-Templated Nickel Phosphide Nanofoams as Additive-Free, Thin-Film Li-Ion Microbattery Anodes.

Transition metal phosphides are a new class of materials generating interest as alternative negative electrodes in lithium-ion batteries. However, metal phosphide syntheses remain underdeveloped in terms of simultaneous control over phase composition and 3D nanostructure. Herein, M13 bacteriophage is employed as a biological scaffold to develop 3D nickel phosphide nanofoams with control over a range of phase compositions and structural elements. Virus-templated Ni5 P4 nanofoams are then integrated as thin-film negative electrodes in lithium-ion microbatteries, demonstrating a discharge capacity of 677 mAh g-1 (677 mAh cm-3 ) and an 80% capacity retention over more than 100 cycles. This strong electrochemical performance is attributed to the virus-templated, nanostructured morphology, which remains electronically conductive throughout cycling, thereby sidestepping the need for conductive additives. When accounting for the mass of additional binder materials, virus-templated Ni5 P4 nanofoams demonstrate the highest practical capacity reported thus far for Ni5 P4 electrodes. Looking forward, this synthesis method is generalizable and can enable precise control over the 3D nanostructure and phase composition in other metal phosphides, such as cobalt and copper.

Electrochemical Interphases for High-Energy Storage Using Reactive Metal Anodes.

Stable electrochemical interphases play a critical role in regulating transport of mass and charge in all electrochemical energy storage (EES) systems. In state-of-the-art rechargeable lithium ion batteries, they are rarely formed by design but instead spontaneously emerge from electrochemical degradation of electrolyte and electrode components. High-energy secondary batteries that utilize reactive metal anodes (e.g., Li, Na, Si, Sn, Al) to store large amounts of charge by alloying and/or electrodeposition reactions introduce fundamental challenges that require rational design in order to stabilize the interphases. Chemical instability of the electrodes in contact with electrolytes, morphological instability of the metal-electrolyte interface upon plating and stripping, and hydrodynamic-instability-induced electroconvection of the electrolyte at high currents are all known to cause metal electrode-electrolyte interfaces to continuously evolve in morphology, uniformity, and composition. Additionally, metal anodes undergo large changes in volume during lithiation and delithiation, which means that even in the rare cases where spontaneously formed solid electrode-electrolyte interphases (SEIs) are in thermodynamic equilibrium with the electrode, the SEI is under dynamic strain, which inevitably leads to cracking and/or rupture during extended battery cycling. There is an urgent need for interphases that are able to overcome each of these sources of instability with minimal losses of electrolyte and electrode components. Complementary chemical synthesis strategies are likewise urgently needed to create self-limited and mechanically durable SEIs that are able to flex and shrink to accommodate volume change. These needs are acute for practically relevant cells that cannot utilize large excesses of anode and electrolyte as employed in proof-of-concept-type experiments reported in the scientific literature. This disconnect between practical needs and research practices makes it difficult to translate promising literature results, underscoring the importance of research designed to reveal principles for good interphase design. This Account considers the fundamental processes involved in interphase formation, stability, and failure and on that basis identifies design principles, synthesis procedures, and characterization methods for enabling stable metal anode-electrolyte interfaces for EES. We first review results from experimental, continuum theoretical, and computational analyses of interfacial transport to identify fundamental connections between the composition of the SEI at metal-electrolyte interfaces and stability. Design principles and tools for creating stable artificial solid-electrolyte interphases (ASEIs) based on polymers, ionic liquids, ceramics, nanoparticles, salts, and their combinations are subsequently discussed. Interphases composed of a second electrochemically active material that stores charge by different processes from the underlying metal electrode emerge as particularly attractive routes toward so-called hybrid electrodes that enable facile scale-up of ASEI designs for commercially relevant EES.

Determination of ethanamizuril, a novel triazine coccidiostat, in rat plasma by ultra-performance liquid chromatography system-tandem mass spectrometry and its application in a toxicological study.

Ethanamizuril is a new triazine compound that has the potential to be a novel anticoccidial drug. Toxicological studies in experimental rats were performed to understand the safety profile of ethanamizuril for drug product development. In this study, a novel, selective and accurate ultra-performance liquid chromatography tandem mass spectrometry method has been developed for the determination of ethanamizuril concentrations in rat plasma. With 4-nitro-o-cresol as an internal standard, sample pretreatment involved a one-step extraction with acetonitrile of 100 µL plasma. The detection was carried out by electrospray ionization mass spectrometry in negative ion mode with selected ion recording. The standard curves were linear (r2 ≥ 0.999) over the concentration range of 0.1-100 µg/mL. The relative standard deviations of intra- and inter-day precisions were less than 8.4 and 8.87%, respectively. The mean extraction recovery of ethanamizuril from rat plasma was 97.68-102.57%. The method was fully validated and successfully applied to monitor plasma concentrations of ethanamizuril in a short-term toxicity study and two-generation reproduction toxicity study. The result of the study confirmed that the elimination of ethanamizuril in rats is slow.

Building Organic/Inorganic Hybrid Interphases for Fast Interfacial Transport in Rechargeable Metal Batteries.

We report a facile in situ synthesis that utilizes readily accessible SiCl4 cross-linking chemistry to create durable hybrid solid-electrolyte interphases (SEIs) on metal anodes. Such hybrid SEIs composed of Si-interlinked OOCOR molecules that host LiCl salt exhibit fast charge-transfer kinetics and as much as five-times higher exchange current densities, in comparison to their spontaneously formed analogues. Electrochemical analysis and direct optical visualization of Li and Na deposition in symmetric Li/Li and Na/Na cells show that the hybrid SEI provides excellent morphological control at high current densities (3-5 mA cm-2 ) for Li and even for notoriously unstable Na metal anodes. The fast interfacial transport attributes of the SEI are also found to be beneficial for Li-S cells and stable electrochemical cycling was achieved in galvanostatic studies at rates as high as 2 C. Our work therefore provides a promising approach towards rational design of multifunctional, elastic SEIs that overcome the most serious limitations of spontaneously formed interphases on high-capacity metal anodes.

Metal-Sulfur Battery Cathodes Based on PAN-Sulfur Composites.

Sulfur/polyacrylonitrile composites provide a promising route toward cathode materials that overcome multiple, stubborn technical barriers to high-energy, rechargeable lithium-sulfur (Li-S) cells. Using a facile thermal synthesis procedure in which sulfur and polyacrylonitrile (PAN) are the only reactants, we create a family of sulfur/PAN (SPAN) nanocomposites in which sulfur is maintained as S3/S2 during all stages of the redox process. By entrapping these smaller molecular sulfur species in the cathode through covalent bonding to and physical confinement in a conductive host, these materials are shown to completely eliminate polysulfide dissolution and shuttling between lithium anode and sulfur cathode. We also show that, in the absence of any of the usual salt additives required to stabilize the anode in traditional Li-S cells, Li-SPAN cells cycle trouble free and at high Coulombic efficiencies in simple carbonate electrolytes. Electrochemical and spectroscopic analysis of the SPAN cathodes at various stages of charge and discharge further show a full and reversible reduction and oxidation between elemental sulfur and Li-ions in the electrolyte to produce Li2S as the only discharge product over hundreds of cycles of charge and discharge at fixed current densities.

Identification and comprehensive analyses of the CBL and CIPK gene families in wheat (Triticum aestivum L.).

BACKGROUND: Calcineurin B-like (CBL) proteins belong to a unique group of calcium sensors in plant that decode the Ca(2+) signature by interacting with CBL-interacting protein kinases (CIPKs). Although CBL-CIPK complexes have been shown to play important roles in the responses to various stresses in plants, little is known about their functions in wheat. RESULTS: A total of seven TaCBL and 20 TaCIPK genes were amplified from bread wheat, Triticum aestivum cv. Chinese Spring. Reverse-transcriptase-polymerase chain reaction (RT-PCR) and in silico expression analyses showed that TaCBL and TaCIPK genes were expressed at different levels in different tissues, or maintained at nearly constant expression levels during the whole life cycle of the wheat plant. Some TaCBL and TaCIPK genes showed up- or down-regulated expressions during seed germination. Preferential interactions between TaCBLs and TaCIPKs were observed in yeast two-hybrid and bimolecular fluorescence complementation experiments. Analyses of a deletion series of TaCIPK proteins with amino acid variations at the C-terminus provided new insights into the specificity of the interactions between TaCIPKs and TaCBLs, and indicated that the TaCBL-TaCIPK signaling pathway is very complex in wheat because of its hexaploid genome. The expressions of many TaCBLs and TaCIPKs were responsive to abiotic stresses (salt, cold, and simulated drought) and abscisic acid treatment. Transgenic Arabidopsis plants overexpressing TaCIPK24 exhibited improved salt tolerance through increased Na(+) efflux and an enhanced reactive oxygen species scavenging capacity. CONCLUSIONS: These results contribute to our understanding of the functions of CBL-CIPK complexes and provide the basis for selecting appropriate genes for in-depth functional studies of CBL-CIPK in wheat.

A rice calcium-dependent protein kinase OsCPK9 positively regulates drought stress tolerance and spikelet fertility.

BACKGROUND: In plants, calcium-dependent protein kinases (CDPKs) are involved in tolerance to abiotic stresses and in plant seed development. However, the functions of only a few rice CDPKs have been clarified. At present, it is unclear whether CDPKs also play a role in regulating spikelet fertility. RESULTS: We cloned and characterized the rice CDPK gene, OsCPK9. OsCPK9 transcription was induced by abscisic acid (ABA), PEG6000, and NaCl treatments. The results of OsCPK9 overexpression (OsCPK9-OX) and OsCPK9 RNA interference (OsCPK9-RNAi) analyses revealed that OsCPK9 plays a positive role in drought stress tolerance and spikelet fertility. Physiological analyses revealed that OsCPK9 improves drought stress tolerance by enhancing stomatal closure and by improving the osmotic adjustment ability of the plant. It also improves pollen viability, thereby increasing spikelet fertility. In OsCPK9-OX plants, shoot and root elongation showed enhanced sensitivity to ABA, compared with that of wild-type. Overexpression and RNA interference of OsCPK9 affected the transcript levels of ABA- and stress-responsive genes. CONCLUSIONS: Our results demonstrated that OsCPK9 is a positive regulator of abiotic stress tolerance, spikelet fertility, and ABA sensitivity.

The wheat aquaporin gene TaAQP7 confers tolerance to cold stress in transgenic tobacco.

Aquaporin proteins (AQPs) have been shown to be involved in abiotic stress responses. However, the precise role of AQPs, especially in response to cold stress, is not understood in wheat (Triticum aestivum). In the present study, quantitative real time polymerase chain reaction (qRT-PCR) analysis revealed that TaAQP7 expression increased in leaves, but decreased in roots after cold treatment. Expression of TaAQP7 in tobacco plants resulted in increased root elongation and better growth compared with wild-type (WT) plants under cold stress. Moreover, after cold treatment, the transgenic tobacco lines exhibited higher chlorophyll contents, lower levels of malondialdehyde (MDA), and less ion leakage (IL) than WT plants. Thus, expression of TaAQP7 enhanced cold stress tolerance in transgenic tobacco. Taken together, our results suggest that TaAQP7 confers cold stress tolerance by relieving membrane damage in the transgenic plants.

Low-Temperature and High-Rate Rechargeable Aluminum Batteries Enabled by Ternary Eutectic Electrolytes.

Rechargeable aluminum batteries (RABs) have garnered extensive scientific attention as a promising alternative chemistry due to the inherent advantages associated with aluminum (Al) metal anodes, including their high theoretical capacities, cost-effectiveness, environmental friendliness, and inherent non-flammable properties. Nonetheless, the practical energy density of RABs is constrained by the electrolytes that support lower operational voltage windows. Herein, we report a ternary eutectic electrolyte composed of 1-ethyl-3-methylimidazolium chloride ([C2C1im]Cl):1-butyl-3-methylimidazolium chloride ([C4C1im]Cl):aluminum chloride (AlCl3) for the application of RABs. The electrolyte exhibits a high operational potential window (~3V vs. Al/Al3+ on SS 316) and high ionic conductivity (~8.3 mS.cm-1) while exhibiting only a low temperature glass transition at -65 oC suitable for all-climate conditions. Al||graphene nanoplatelets cell delivers a high capacity of ~117 mAh/g, and ~43 mAh/g at a very high current densities of 1A/g and 5A/g, respectively. The cells render a reversible capacity of 20 mAh/g at -20 oC and 17 mAh/g at -40 oC, indicating their suitability for operation under extreme environmental conditions. We comprehensively evaluated the design and optimization of carbon paper-based battery systems. The ternary eutectic electrolyte demonstrates exceptional electrochemical performance, thus signifying its substantial potential for utilization in high-performance energy storage systems in all climates.

Expression profiling of ALOG family genes during inflorescence development and abiotic stress responses in rice (Oryza sativa L.).

The ALOG (Arabidopsis LSH1 and Oryza G1) family proteins, namely, DUF640 domain-containing proteins, have been reported to function as transcription factors in various plants. However, the understanding of the response and function of ALOG family genes during reproductive development and under abiotic stress is still largely limited. In this study, we comprehensively analyzed the structural characteristics of ALOG family proteins and their expression profiles during inflorescence development and under abiotic stress in rice. The results showed that OsG1/OsG1L1/2/3/4/5/6/7/8/9 all had four conserved helical structures and an inserted Zinc-Ribbon (ZnR), the other four proteins OsG1L10/11/12/13 lacked complete Helix-1 and Helix-2. In the ALOG gene promoters, there were abundant cis-acting elements, including ABA, MeJA, and drought-responsive elements. Most ALOG genes show a decrease in expression levels within 24 h under ABA and drought treatments, while OsG1L2 expression levels show an upregulated trend under ABA and drought treatments. The expression analysis at different stages of inflorescence development indicated that OsG1L1/2/3/8/11 were mainly expressed in the P1 stage; in the P4 stage, OsG1/OsG1L4/5/9/12 had a higher expression level. These results lay a good foundation for further studying the expression of rice ALOG family genes under abiotic stresses, and provide important experimental support for their functional research.

Corrigendum: Expression profiling of ALOG family genes during inflorescence development and abiotic stress responses in rice (Oryza sativa L.).

[This corrects the article DOI: 10.3389/fgene.2024.1381690.].

Nondestructive analysis of dragonfly eye beads from the warring states period, excavated from a Chu tomb at the Shenmingpu site, Henan Province, China.

Dragonfly eye beads are considered to be the earliest types of glass objects in China, and in the past have been considered as evidence of culture interaction or trade between West and East Asia. In this article, synchrotron radiation microcomputed tomography and µ-probe energy dispersive X-ray fluorescence were used to determine the chemical composition, microstructure, and manufacturing technology of four dragonfly eye beads, excavated from a Chu tomb at the Shenmingpu site, Henan Province, China, dated stylistically to the Middle and Late Warring State Period (475 BC-221 BC). First, a nondestructive method was used to differentiate the material types including faience (glazed quartz), frit, glazed pottery (clay ceramic), and glass. Three beads were identified as faience and one bead as glazed pottery. The glaze recipe includes quartz, saltpeter, plant ash, and various copper, and is classified as belonging to the K2O-CaO-SiO2 glass system, which indicates that these beads were not imported from the West. Based on computed tomography slices, the manufacturing technology of the faience eye beads appears to include the use of an inner core, molding technology, and the direct application glazing method. These manufacturing features are consistent with the techniques used in China during this same time period for bronze mold-casting, proto-porcelain, and glass.

Synthesis of Graphene Quantum Dots Enhanced Nano Ca(OH)2 from Ammoniated CaCl2.

Ca(OH)2 nanoparticles are effective materials for cultural heritage restoration, hazardous substance absorption and photocatalyst. However, many methods are complex, and the particle sizes are usually above 80-100 nm, involving mediocre efficacy for application in the stone restoration field. In this work, Nano Ca(OH)2 with diameters less than 70 nm and composited with Graphene Quantum Dots (GQDs) were successfully synthesized in aqueous media. The morphology and structure of the nanoparticles were investigated with TEM, HRTEM, XRD, Raman and FTIR. The particle size distribution and relative kinetic stability of the Ca(OH)2 in ethanol were performed using a laser particle size analyzer and spectrophotometer. Firstprinciple calculations based on the spin-polarized density functional theory (DFT) were carried out to study the reaction process and combination model. The nanoparticles, as prepared, are composed of primary hexagonal crystals and high ammoniated precursors, which have a positive effect on reducing the grain size, and interacted with the GQDs hybrid process. According to the First-principle calculations results, the energy variation of the whole reaction process and the bonding mode between Ca(OH)2 and GQDs can be understood better.

A Secondary Al-CO2 Battery Enabled by Aluminum Iodide as a Homogeneous Redox Mediator.

As an emerging energy storage concept, Al-CO2 batteries have not yet been demonstrated as a rechargeable system that can deliver a high discharge voltage and a high capacity. In this work, we present a homogeneous redox mediator to access a rechargeable Al-CO2 battery with an ultralow overpotential of 0.05 V. In addition, the resulting rechargeable Al-CO2 cell can maintain a high discharge voltage of 1.12 V and delivers a high capacity of 9394 mAh/gcarbon. Nuclear magnetic resonance (NMR) analysis indicates that the discharge product is aluminum oxalate which can facilitate the reversible operation of Al-CO2 batteries. The rechargeable Al-CO2 battery system demonstrated here holds great promise as a low-cost and high-energy alternative for future grid energy storage applications. Meanwhile, the Al-CO2 battery system could facilitate capture and concentration of atmospheric CO2, ultimately benefiting both the energy and environmental sectors of society.

Heterodimers with a cucurbitane-type triterpenoid skeleton from the branches of Elaeocarpus dubius.

Four undescribed and two known cucurbitane-type triterpenoids, including two heterodimers, elaeocarpudubins A and B, were isolated from the branches of Elaeocarpus dubius (Elaeocarpaceae). The chemical structures of these undescribed isolates were determined by analyses of 1D and 2D NMR and MS data, electronic circular dichroism (ECD) calculations, and chemical transformation. Biogenetically, elaeocarpudubins A and B might be derived from cucurbitacin F through Michael addition with vitamin C and (-)-catechin, respectively. These six isolates were evaluated for their cytotoxic activities against human leukemia HL-60, human lung adenocarcinoma A549, human hepatoma SMMC-7721, human breast cancer MCF-7, human colon cancer SW480, and paclitaxel-resistant A549 (A549/Taxol) cell lines, for their antioxidant properties using the 1,1-diphenyl-2-picrylhydrazyl (DPPH) radical scavenging assay, and for their differentiation effects on nerve growth factor (NGF)-mediated neurite outgrowth in rat pheochromocytoma PC12 cells. Cucurbitacins F (IC50 of 4.98-38.11 µM) and D (IC50 of 0.03-4.40 µM) showed growth-inhibitory activities against these six cancer cell lines. Elaeocarpudubin B (IC50 of 61.04 µM) and elaeocarpudoside B (IC50 of 6.93 µM) showed antioxidant activities. Elaeocarpudubin B and elaeocarpudoside B also showed neurite outgrowth-promoting activities in PC12 cells at a concentration of 10 µM.

UV ageing studies: evaluation of lightfastness declarations of commercial acrylic paints.

The lightfastness declarations of several different commercial acrylic paints and different quality series were tested by artificial UV ageing. To evaluate their lightfastness declarations, three acrylic colours (cadmium red, ultramarine blue and chromium oxide green) from six companies (Lascaux, Liquitex, Lukas, Rembrandt, Schmincke, and Winsor & Newton) were analysed before and after UV exposure. Characterisation and identification of these materials were carried out with Py-GC/MS, FTIR-ATR analyses, and colour measurements. Particular attention was focused on the Py-GC/MS measurements and on comparison of the single-shot method for pyrolysis of polymers and the double-shot mode which enables a unique combination of pyrolysis methods for analysis of polymers and thermal desorption for documentation of the volatile compounds. Depending on the particular company and the specific value of the lightfastness declaration, different binding media (i.e. poly(EA/MMA), poly(nBA/MMA), and poly(2-EHA/MMA)), and fillers (i.e. kaolinite, calcium carbonate, barite, and talc) were characterised and identified by Py-GC/MS and FTIR-ATR analyses. After UV exposure, several alteration processes with consequent formation of volatile compounds or new products were observed by both techniques, especially for the blue paints. In particular, the double-shot mode of Py-GC/MS enabled the detection of oxidation products, which could not be detected with the single-shot mode. Comparison of the lightfastness declarations for each of the blue, green, and red paints and the noted alterations broadly agreed for most of the paints.

Photochemical degradation study of polyvinyl acetate paints used in artworks by Py-GC/MS.

Photochemical degradation of commercial polyvinyl acetate (PVAc) homopolymer and PVAc paints mixed with burnt umber, cobalt blue, cadmium red dark, nickel azo yellow and titanium white commonly used for artworks were studied by pyrolysis-gas chromatography/mass spectrometry (Py-GC/MS) and Fourier transform infrared spectroscopy-attenuated total reflectance (FTIR-ATR). Py-GC/MS with single-shot technique was used for the characterization of the thermal degradation of PVAc at different temperatures, while the double-shot technique of Py-GC/MS was used to reveal the differences in the specimens before and after UV ageing, including the changes of detectable amounts of deacetylation product - acetic acid and plasticizers such as diethyl phthalate (DEP). Furthermore, the relative concentration of the pyrolysis products of the paint samples could be measured and compared in the second step of the double-shot Py-GC/MS, which are highly dependent on the presence of pigments and the ageing status of PVAc paints.

Study on the mechanism of the black crust formation on the ancient marble sculptures and the effect of pollution in Beijing area.

In Beijing area, the precious stone objects often suffer from the black crusts on the specific parts of the objects, in order to understand the forming mechanism of the black crusts, samples from the stone sculptures in Beijing Stone Carving Art Museum, ZHIHUA Temple and Museum of Western Zhou Yandu Relics were taken and studied. Nondestructive measurement was carried out firstly to acquire main elements of the samples by portable X-ray spectrum (pXRF). Morphology and microstructure of typical black crust samples were examined by ultra-depth of field microscope (UDFM) and scanning electron microscopy coupled with energy dispersive spectroscopy (SEM-EDS). Compositions of black crusts and body rocks were evaluated with X-ray diffraction (XRD), Raman spectra and mapping. Inductively coupled plasma optical emission spectrometry (ICP-OES) and pyrolysis-gas chromatography/mass spectrometry (Py-GCMS) were used to identify the major pollution sources leading to the black crusts. Through this study, the composition of the black crusts was revealed. Different gypsum crystals and carbonaceous species were found. Pollutant elements analysis and pyrolysis products provide indicators of the pollution sources. As consequence of strong photochemical oxidation processes and the high temperature from June to September in Beijing, more acid rain precursors can be formed. Frequent sulphation process occurs on the CaCO3/CaMg(CO3)2 surface. Combining morphology results and atmospheric data, the formation of black crusts in Beijing can be deduced.