Improving Crystallinity and Out-of-Plane Orientation in Quasi-2D Ruddlesden-Popper Perovskite by Fluorinated Organic Salt for Light-Emitting Diodes.

Fluoro-substituted aromatic alkylammonium spacer cations are found effective to improve the performance of quasi-2D perovskite light-emitting diodes (PeLEDs). The fluorine substitution is generally attributed to the defect passivation, quantum well width control, and energy level adjustments. However, the substituted cations can also affect the crystallization process but is not thoroughly studied. Herein, a comparison study is carried out using bare PEA cation and three different fluoro-substituted PEA (x-F-PEA, x = o, ortho; m, meta; p, para) cations to investigate the impacts of different substitution sites on the perovskite crystallization and orientations. By using GIWAXS, p-F-PEA cation is found to induce the strongest preferential out-of-plane orientations with the best crystallinity in quasi-2D perovskite. Using dynamic light scattering (DLS) methods, larger colloidal particles (630 nm) are revealed in p-F-PEA precursor solutions than the PEA cations (350 nm). The larger particles can accelerate the crystallization process and induce out-of-plane orientation from increased dipole-dipole interaction. The transient absorption measurement confirms longer radiative recombination lifetime, proving beneficial effect of p-F-PEA cation. As a result, the fabricated p-F-PEA-based PeLEDs achieved the highest EQE of 15.2%, which is higher than those of PEA- (8.8%), o-F-PEA- (4.3%), and m-F-PEA-based (10.3%) PeLEDs.

Isomerization in Alkynyl-Protected Gold Nanoclusters.

We report the controlled synthesis and structures of two isomeric gold nanoclusters, whose compositions are determined to be Au23(C≡CBut)15 (denoted as Au23-1 and Au23-2) by single-crystal X-ray diffraction and matrix-assisted laser desorption ionization time-of-flight mass spectrometry. This is the first time isomerism is discovered in alkynyl-protected gold nanoclusters. The metal-to-ligand ratios in these two clusters are different from known Aun(SR)m systems and have not been observed in the Aux(C≡CPh)y family. This pair of isomers exhibits different optical properties, although they have similar structures and identical components. For both Au23 clusters, time-dependent density functional theory calculations revealed the frontier orbitals highest occupied molecular orbital (HOMO)-1, HOMO, and lowest unoccupied molecular orbital (LUMO) are mainly constructed from the Au15 kernel and V-shaped alkynyl-gold motifs. The HOMO → LUMO transition of Au23-1 is optically forbidden, whereas it is allowed in Au23-2. It is also found that Au23-2 cluster can be transformed to Au23-1 spontaneously under ambient conditions. This work offers further insight into the synthesis and isomerism of all-alkynyl-protected gold nanoclusters and will stimulate more investigation of isomeric metal nanoclusters.

Copper(II)-Catalyzed Asymmetric Photoredox Reactions: Enantioselective Alkylation of Imines Driven by Visible Light.

Asymmetric photoredox catalysis offers exciting opportunities to develop new synthetic approaches to chiral molecules through novel reaction pathways. Employing the first-row transition metal complexes as the chiral photoredox catalysts remains, however, a formidable challenge, although these complexes are economic, environmentally friendly, and often exhibit special reactivities. We report in this Article the development of one class of highly efficient asymmetric/photoredox bifunctional catalysts based on the copper(II) bisoxazoline complexes (CuII-BOX) for the light-induced enantioselective alkylation of imines. The reactions proceed under very mild conditions and without a need for any other photosensitizer. The simple catalytic system and readily tunable chiral ligands enable a significantly high level of enantioselectivity for the formation of chiral amine products bearing a tetrasubstituted carbon stereocenter (36 examples, up to 98% ee). Overall, the CuII-BOX catalysts initiate the radical generation, and also govern the subsequent stereoselective transformations. This strategy utilizing chiral complexes comprised of a first-row transition metal and a flexible chiral ligand as the asymmetric photoredox catalysts provides an effective platform for the development of green asymmetric synthetic methods.

Ligand-Controlled Doping Effects in Alloy Nanoclusters Au4 Ag23 and Au5 Ag24.

The syntheses and properties of two bimetallic nanoclusters [Au4 Ag23 (C≡CtBu)10 (dppf)4 Cl7 ](PF6 )2 and [Au5 Ag24 (C≡CC6 H4 -p-tBu)16 (dppf)4 Cl4 ](PF6 )3 are reported. The Au atoms distributed in both the cores and the surface motifs are clearly determined. The two nanoclusters show distinctly different geometric structures and electronic properties, which are attributed to the subtle changes in the surface alkynyl structures.

Reliable lateral Zn deposition along (002) plane by oxidized PAN separator for zinc-ion batteries.

Aqueous zinc ion batteries (AZIBs) are the promising candidate for energy storage where safety and low cost are the major concerns. However, the uneven and random electrodeposition of Zn has become a serious impediment to the deep recharging of AZIBs. Conventional modifications on zinc substrate can promote homogenous zinc deposition initially, but not sustainably. Here, an oxidized polyacrylonitrile (OPAN) membrane with a conjugated planar structure is proposed as a zinc ion battery separator. This separator can continuously regulate the growth of Zn with (002) texture to inhibit dendrites. In addition, the separator has a fast Zn2+ ion transfer, which can spontaneously repel SO42- and relieve side reactions. As a result, the Zn-symmetric batteries show cycle lifetime of more than 1300 hours at 1 mA cm-2 and 1 mA h cm-2, and kept stable for more than 160 hours even at 65% high discharge of depth (DOD). The MnO2//Zn full celled assembled with an OPAN separator had very little decay for 5000 cycles at 2 A g-1. This work provides a new method for realizing the continuous and uniform deposition of Zn metals, which also provides a new route for batteries with metallic anodes.

High-Voltage and Stable Manganese Hexacyanoferrate/Zinc Batteries Using Gel Electrolytes.

Because of the high safety and environmental friendliness, aqueous zinc-ion batteries have gained a lot of attention in recent years. Prussian blue and its analogues are regarded as a promising cathode material of zinc-ion batteries. Manganese hexacyanoferrate is appropriate among them due to its high operating voltage, large capacity, and cheap price. However, the poor cycling stability of manganese hexacyanoferrate, mainly caused by transition metal dissolution, side reaction, and phase transition, greatly restricts its practical application. In this work, gelatin is used to limit the content of free water in the electrolyte, thus reducing the dissolution effect of transition metal manganese. The introduction of gelatin improves the durability of the Zn anode as well. The optimized MnHCF/gel-0.3/Zn battery displays a high reversible capacity (120 mAh·g-1 at 0.1 A·g-1), an excellent rate performance (42.7 mAh·g-1 at 2 A·g-1), and a good capacity retention (65% at 0.5 A·g-1 after 1000 cycles).

Liquid Phase Graphene Exfoliation with a Vibration-Based Acoustofluidic Effector.

Liquid phase exfoliation (LPE) has emerged as a promising method for the industrial-scale production of graphene. However, one of its critical steps, namely sonication, has faced challenges due to high power consumption and low efficiency, leading to limited applicability in industrial settings. This study introduces a novel, cost-effective microfluidic sonication device designed to significantly reduce power consumption while efficiently assisting the LPE process for graphene production. By coupling a capillary with a buzzer and applying an appropriate electric signal, simulation and particle tracing experiments reveal the generation of robust shear forces resulting from acoustic streaming and cavitation when the capillary end is immersed in the liquid. For the first time, the capillary-based sonication device was effectively utilized for graphene exfoliation in a DMF (N,N-Dimethylformamide) + NaOH liquid phase system. The SEM (Scanning Electron Microscope) and Raman characterization results corroborate the successful exfoliation of 100 nm with thicknesses below 10 nm graphene sheets from graphite flakes using this pioneering device. The values of I2D/IG increase after processing, which suggests the exfoliation of graphite flakes into thinner graphene sheets. The vibration-based acoustofluidic effector represents a versatile and scalable miniature device, capable of being employed individually for small-batch production, thereby optimizing the utilization of raw 2D materials, particularly in experimental scenarios. Alternatively, it holds the potential for large-scale manufacturing through extensive parallelization, offering distinct advantages in terms of cost-efficiency and minimal power consumption.

Bifunctional Alloy/Solid-Electrolyte Interphase Layer for Enhanced Potassium Metal Batteries Via Prepassivation.

Potassium (K) metal batteries have attracted great attention owing to their low price, widespread distribution, and comparable energy density. However, the arbitrary dendrite growth and side reactions of K metal are attributed to high environmental sensitivity, which is the Achilles' heel of its commercial development. Interface engineering between the current collector and K metal can tailor the surface properties for K-ion flux accommodation, dendrite growth inhibition, parasitic reaction suppression, etc. We have designed bifunctional layers via prepassivation, which can be recognized as an O/F-rich Sn-K alloy and a preformed solid-electrolyte interphase (SEI) layer. This Sn-K alloy with high substrate-related binding energy and Fermi level demonstrates strong potassiophilicity to homogeneously guide K metal deposition. Simultaneously, the preformed SEI layer can effectually eliminate side reactions initially, which is beneficial for the spatially and temporally KF-rich SEI layer on K metal. K metal deposition and protection can be implemented by the bifunctional layers, delivering great performance with a low nucleation overpotential of 0.066 V, a high average Coulombic efficiency of 99.1%, and durable stability of more than 900 h (1 mA cm-2, 1 mAh cm-2). Furthermore, the high-voltage platform, energy, and power densities of K metal batteries can be realized with a conventional Prussian blue analogue cathode. This work provides a paradigm to passivate fragile interfaces for alkali metal anodes.

The Formation Mechanism of (001) Facet Dominated α-FAPbI3 Film by Pseudohalide Ions for High-Performance Perovskite Solar Cells.

Formamidinium lead triiodide (α-FAPbI3 ) has been widely used in high-efficiency perovskite solar cells due to its small band gap and excellent charge-transport properties. Recently, some additives show facet selectivity to generate a (001) facet-dominant film during crystallization. However, the mechanism to realize such (001) facet selectivity is not fully understood. Here, the authors attempted to use three ammonia salts NH4 X (X are pseudohalide anions) to achieve better (001) facet selectivity in perovskite crystallization and improved crystallinity. After addition, the (001) facet dominance is generally increased with the best effect from SCN- anions. The theoretical calculation revealed three mechanisms of such improvements. First, pseudohalide anions have larger binding energy than the iodine ion to bind the facets including (110), (210), and (111), slowing down the growth of these facets. The large binding energy also reduces nucleation density and improves crystallinity. Second, pseudohalide ions improve phase purity by increasing the formation energies of the δ-phase and other hexagonal polytypes, retarding the α- to δ-phase transition. Third, the strong binding of these anions can also effectively passivate the iodine vacancies and suppress nonradiative recombination. As a result, the devices show a power conversion efficiency of 24.11% with a Voc of 1.181 V.

Durable modulation of Zn(002) plane deposition via reproducible zincophilic carbon quantum dots towards low N/P ratio zinc-ion batteries.

Aqueous zinc-ion batteries (ZIBs) are promising candidates for next-generation energy storage systems due to their intrinsic safety, environmental friendliness, and low cost. However, the uncontrollable Zn dendrite growth during cycling is still a critical challenge for the long-term operation of ZIBs, especially under harsh lean-Zn conditions. Herein, we report nitrogen and sulfur-codoped carbon quantum dots (N,S-CDs) as zincophilic electrolyte additives to regulate the Zn deposition behaviors. The N,S-CDs with abundant electronegative groups can attract Zn2+ ions and co-deposit with Zn2+ ions on the anode surface, inducing a parallel orientation of the (002) crystal plane. The deposition of Zn preferentially along the (002) crystal direction fundamentally avoids the formation of Zn dendrites. Moreover, the co-depositing/stripping feature of N,S-CDs under an electric field force ensures the reproducible and long-lasting modulation of the Zn anode stability. Benefiting from these two unique modulation mechanisms, stable cyclability of the thin Zn anodes (10 and 20 µm) at a high depth of discharge (DOD) of 67% and high Zn||Na2V6O16·3H2O (NVO, 11.52 mg cm-2) full-cell energy density (144.98 W h Kg-1) at a record-low negative/positive (N/P) capacity ratio of 1.05 are achieved using the N,S-CDs as an additive in ZnSO4 electrolyte. Our findings not only offer a feasible solution for developing actual high-energy density ZIBs but also provide in-depth insights into the working mechanism of CDs in regulating Zn deposition behaviors.

Controllable and Homogeneous Lithium Electrodeposition via Lithiophilic Anchor Points.

Uncontrollable growth of lithium (Li) dendrites and low Coulombic efficiency induce security hazards and a short cycling lifespan of Li metal batteries. In this study, well-aligned ZnO nanorods on a periodic three-dimensional (3D) copper mesh (CM) are modified as lithiophilic anchor points to regulate the electrodeposition behavior of Li metal anodes. The in situ generated LiZn/Li2O arrays can efficiently guide the homogeneous Li electrodeposition along the nanorods. The porous structure of CM provides void space for the well-controlled lateral growth of Li starting from nanorod arrays. Moreover, the high surface area generated by both CM and the ZnO nanorods favors the charge transfer with low local current densities along the anode. Compared with bare Li anodes, Li-ZnO@CM anodes exhibited prolonged cycling stability for symmetric cells and superior capacity retention within Li/LiFePO4 full cells, demonstrating the effective design principles of ZnO@CM for stabilizing Li metal batteries.

Self-Healing of Prussian Blue Analogues with Electrochemically Driven Morphological Rejuvenation.

Maintaining the morphology of electrode materials with high invertibility contributes to the prolonged cyclic stability of battery systems. However, the majority of electrode materials tend to degrade during the charge-discharge process owing to the inevitable increase in entropy. Herein, a self-healing strategy is designed to promote morphology rejuvenation in Prussian blue analogue (PBA) cathodes by cobalt doping. Experimental characterization and theoretical calculations demonstrate that a trace amount of cobalt can decelerate the crystallization process and restore the cracked areas to ensure perfect cubic structures of PBA cathodes. The electric field controls the kinetic dynamics, rather than the conventional thermodynamics, to realize the "electrochemically driven dissolution-recrystallization process" for the periodic self-healing phenomenon. The properties of electron transportation and ion diffusion in bulk PBA are also improved by the doping strategy, thus boosting the cyclability with 4000 cycles in a diluent electrolyte. This discovery provides a new paradigm for the construction of self-healing electrodes for cathodes.

Hierarchical Stratiform of a Fluorine-Doped NiO Prism as an Enhanced Anode for Lithium-Ion Storage.

Doping is regarded as a prominent strategy to optimize the crystal structure and composition of battery materials to withstand the anisotropic expansion induced by the repeated insertion and extraction of guest ions. The well-known knowledge and experience obtained from doping engineering predominate in cathode materials but have not been fully explored for anodes yet. Here, we propose the practical doping of fluorine ions into the host lattice of nickel oxide to unveil the correlation between the crystal structure and electrochemical properties. Multiple ion transmission pathways are created by the orderly two-dimensional nanosheets, and thus the stress/strain can be significantly relieved with trace fluorine doping, ensuring the mechanical integrity of the active particle and superior electrochemical properties. Density functional theory calculations manifest that the F doping in NiO could improve crystal structural stability, modulate the charge distribution, and enhance the conductivity, which promotes the performance of lithium-ion storage.

[Au7Ag9(dppf)3(CF3CO2)7BF4]n: a linear nanocluster polymer from molecular Au7Ag8 clusters covalently linked by silver atoms.

We report the total structure determination of a covalently bonded nanocluster polymer [Au7Ag9(dppf)3(CF3CO2)7BF4]n (1). This features a one-dimensional linear chain, consisting of unique molecular building blocks, Au7Ag8(dppf)3(CF3CO2)7 clusters, which are linked together by Ag-O bonds rather than Au-Au interactions or bidentate organic bridges as previously reported.

A chiral nickel DBFOX complex as a bifunctional catalyst for visible-light-promoted asymmetric photoredox reactions.

The enantioselective photoredox reaction of α,ß-unsaturated carbonyl compounds and tertiary/secondary α-silylamines was enabled by a readily available single NiII-DBFOX catalyst (DBFOX = 4,6-bis((R)-4-phenyl-4,5-dihydrooxazol-2-yl)dibenzo[b,d]furan) under visible light conditions. The non-precious chiral catalyst is involved in the photochemical process to initiate single electron transfer and at the same time provides a well-organized chiral environment for the subsequent radical transformations. Good to excellent enantioselectivities (80-99% ee) were obtained for the formation of chiral γ-amino carboxylic acid derivatives and γ-lactams.

Inhibiting Receptor of Advanced Glycation End Products Attenuates Pressure Overload-Induced Cardiac Dysfunction by Preventing Excessive Autophagy.

The receptor for advanced glycation end products (RAGE) is involved in heart failure (HF) by mediating diverse pathologic processes, including the promotion of inflammation and autophagy. However, the role of RAGE in pressure overload-induced HF is not well understood. We found that stimulation of RAGE triggered the death of neonatal rat ventricular myocytes (NRVMs), while cell death was alleviated by ATG5 knockdown. Using transverse aortic constriction (TAC) in mice as a model of pressure overload-induced HF, we demonstrated that RAGE knockout or RAGE blockade attenuated cardiac hypertrophy and fibrosis as well as cardiac dysfunction at 8 weeks after TAC. Importantly, RAGE knockout reversed upregulation of autophagy related proteins (LC3BII/I and Beclin 1) and reduced cardiomyocyte death, indicating that excessive autophagy after TAC was inhibited. Moreover, RAGE knockout or blockade reduced the upregulation of pp65-NFκB and BNIP3, which mediate autophagy. Taken together, these results suggest that RAGE plays an important role in the progression of HF by regulating autophagy. Therefore, inhibition of the RAGE-autophagy axis could be a promising new strategy for treatment of heart failure.