Adsorption Process Optimization and Adsorbent Evaluation Based on Langmuir Isotherm Model.

Adsorption separation is considered one of the most commonly used gas purification methods. At present, the most widely used adsorption methods are mainly pressure swing adsorption (PSA) and temperature swing adsorption (TSA). In both adsorption methods, a comprehensive understanding of the equilibrium data and the adsorption capacity of the adsorbent is essential for process design and optimization, and the adsorption isotherm can provide a powerful aid in this regard. In this study, through mathematical analysis of the Langmuir isotherm model, the optimal cyclic adsorption conditions and the optimal thermodynamic parameters (entropy change and enthalpy change) under PSA and TSA were obtained. In addition, the isotherm model can be used to predict the isobaric adsorption capacity, and the objective function was established according to the cyclic adsorption capacity and the regeneration sensible heat consumption per unit adsorption capacity to calculate the optimal adsorption/desorption temperatures and optimal cyclic adsorption capacity of various adsorbents.

Mild synthesis of superadhesive hydrogel electrolyte with low interfacial resistance and enhanced ionic conductivity for flexible zinc ion battery.

Flexible aqueous battery is considered to be one of the most promising energy storage devices for powering flexible electronics. However, inferior interfacial compatibility in electrode-electrolyte interfaces and inefficient ionic channel of electrolytes usually result in potential troubles when applied in practical applications. Herein, we report a mild synthetic route to a sodium lignosulfonate-polyacrylamide hydrogel electrolyte with a high adhesiveness to achieve low electrode-electrolyte interfacial resistance and fast ionic conduction. Comprehensive experiments show that the catechol groups from sodium lignosulfonate demonstrate strong interactions with both cathode and anode materials, and thus greatly reduce the contact resistances across the electrodes. Meanwhile, the existence of sulfonate groups significantly enhances the ionic conductivity of the hydrogel electrolyte. Benefiting from this design, a low ohmic resistance of 3.8 Ω (i.e., 11.4 Ω cm2 ), a low charge transfer resistance of 22.5 Ω (i.e., 67.5 Ω cm2 ), a high ionic conductivity of 31.1 mS cm-1 as well as a 100% capacity retention upon harsh bending deformation can be realized in the flexible zinc ion battery, which are significantly superior to those in the traditional candidates. The present investigation provides new insight into addressing the interfacial issue plaguing flexible energy storage devices.