A Sterically Accessible Monomeric Stibine Oxide Activates Organotetrel(IV) Halides, Including C-F and Si-F Bonds.

Phosphine oxides and arsine oxides are common laboratory reagents with diverse applications that stem from the chemistry exhibited by these monomeric species. Stibine oxides are, in contrast, generally dimeric or oligomeric species because of the reactivity-quenching self-association of the highly polarized stiboryl (Sb=O/Sb+-O-) group. We recently isolated Dipp3SbO (Dipp = 2,6-diisopropylphenyl), the first example of a kinetically stabilized monomeric stibine oxide, which exists as a bench-stable solid and bears an unperturbed stiboryl group. Herein, we report the isolation of Mes3SbO (Mes = mesityl), in which the less bulky substituents maintain the monomeric nature of the compound but unlock access to a wider range of reactivity at the unperturbed stiboryl group relative to Dipp3SbO. Mes3SbO was found to be a potent Lewis base in the formation of adducts with the main-group Lewis acids PbMe3Cl and SnMe3Cl. The accessible Lewis acidity at the Sb atom results in a change in the reactivity with GeMe3Cl, SiMe3Cl, and CPh3Cl. With these species, Mes3SbO formally adds the E-Cl (E = Ge, Si, C) bond across the unsaturated stiboryl group to form a 5-coordinate stiborane. The biphilicity of Mes3SbO is sufficiently potent to activate even the C-F and Si-F bonds of C(p-MeOPh)3F and SiEt3F, respectively. These results mark a significant contribution to an increasingly rich literature on the reactivity of polar, unsaturated main-group motifs. Furthermore, these results highlight the utility of a kinetic stabilization approach to access unusual bonding motifs with unquenched reactivity that can be leveraged for small-molecule activation.

Silver 2,4'-Bipyridine Coordination Polymer for the High-Capacity Trapping of Perrhenate, A Pertechnetate Surrogate.

Pertechnetate, the most stable form of the radionuclide 99Tc in aerobic aqueous systems, is a hazardous anion present in nuclear waste. Its high mobility in water makes the remediation of the anion challenging. In the past decade, significant effort has been placed into finding materials capable of adsorbing this species. Here, we present the synthesis and high-resolution crystal structure of the coordination polymer [Ag(2,4'-bipyridine)]NO3, which is capable of sequestering perrhenate─a pertechnetate surrogate─through anion exchange to form another new coordination polymer, [Ag(2,4'-bipyridine)]ReO4. Both the beginning and end structures were solved by single-crystal X-ray diffraction and the adsorption reaction was monitored through inductively coupled plasma-optical emission spectroscopy and UV-vis spectroscopy. The exchange reaction follows a pseudo-second-order mechanism and the maximum adsorption capacity is 764 mg ReO4/g [Ag(2,4'-bipyridine)]NO3, one of the highest recorded for a coordination polymer or metal-organic framework. A solvent-mediated recrystallization mechanism was determined by monitoring the ion-exchange reaction by scanning electron microscopy-energy-dispersive spectroscopy and powder X-ray diffraction.

H-Atom Assignment and Sb-O Bonding of [Mes3SbOH][O3SPh] Confirmed by Neutron Diffraction, Multipole Modeling, and Hirshfeld Atom Refinement.

Neutron wavelength-resolved Laue diffraction experiments permit accurate refinement of the H-atom positions and anisotropic displacement parameters of [Mes3SbOH][O3SPh]. A multipole-based charge density refinement and a topological analysis of the refined electron density were also performed. Hirshfeld atom refinement (HAR) recovers the neutron-determined H-atom parameters, and the quantum-mechanical electron density used in HAR recovers the electron density topology from the refined multipole model. These results confirm that [Mes3SbOH][O3SPh] does indeed feature a hydroxystibonium cation with a nominal Sb-O single bond and not a stibine oxide with an Sb=O/Sb+-O- bond.

Analysis of Oxygen-Pnictogen Bonding with Full Bond Path Topological Analysis of the Electron Density.

A variety of methods are available to investigate the bonding in inorganic compounds. In contrast to wavefunction-based analyses, topological analysis of the electron density affords the advantage of analyzing a physical observable: the electron density. Classical topological analyses of bonding interactions within the atoms in molecules framework typically involve location of a bond path between two atoms and evaluation of a range of real-space functions at the (3, -1) critical point in the electron density that exists on that bond path. We show here that counter-intuitive trends are obtained from the analysis of the electron density (ρ), the Laplacian (∇2ρ), and ellipticity (ε) at the O-E (3, -1) critical points in the coupled-cluster singles doubles electron densities of a series of compounds featuring a range of oxygen-pnictogen bond types: EO+, HEO, H2EOH, H3EOH+, and H3EO (where E = N, P, As, Sb, or Bi). If, instead, these real-space functions are evaluated along the length of the bond path, the discrepancies in the trends are resolved. We show that robust results are also obtained using electron densities from less computationally demanding density functional theory calculations. The increased computational efficiency allowed us to also investigate organic derivatives of these oxygen-pnictogen-bonded compounds and observe that the trends hold in these instances as well. We anticipate that these results will be of use to inorganic chemists engaged in the synthesis and evaluation of novel bonding interactions, particularly those involving heavy main-group elements.

Therapeutic Potential of Two Visible Light Responsive Luminescent photoCORMs: Enhanced Cellular Internalization Driven by Lipophilicity.

Herein we report the synthesis, characterization, and cellular internalization properties of two visible-light active luminescent Mn-based photoCORMs. The enhanced membrane permeability of the photoactive Mn carbonyl complex (photoCORM) derived from a designed lipophilic ligand namely, [Mn(CO)3(Imdansyl)(L1)](CF3SO3) (1) (where L1 = a diazabutadiene-based ligand containing two highly lipophilic adamantyl motifs, Imdansyl = dansylimidazole) promoted rapid internalization within human colorectal adenocarcinoma (HT-29) cells compared to [Mn(CO)3(Imdansyl)(L2)](CF3SO3) (2) (where L2 = a diazabutadiene ligand bearing two hydrophilic 1,3,5-triazaadamantyl group). Colocalization experiments using membrane stain indicate different extents of localization of the two CO complexes within the cellular matrix. Visible-light triggered CO release from the lipophilic photoCORM induced caspase-3/7 activation on HT-29 cells, which was detected using confocal microscopy. The rapid accumulation of the lipophilic photoCORM 1 in the cellular membrane resulted in more efficient CO-induced cell death compared to the hydrophilic analogue 2.

Photochemistry of 2-butenedial and 4-oxo-2-pentenal under atmospheric boundary layer conditions.

Unsaturated 1,4-dicarbonyl compounds, such as 2-butenedial and 4-oxo-2-pentenal are produced in the atmospheric boundary layer from the oxidation of aromatic compounds and furans. These species are expected to undergo rapid photochemical processing, affecting atmospheric composition. In this study, the photochemistry of (E)-2-butenedial and both E and Z isomers of 4-oxo-2-pentenal was investigated under natural sunlight conditions at the large outdoor atmospheric simulation chamber EUPHORE. Photochemical loss rates, relative to j(NO2), are determined to be j((E)-2-butenedial)/j(NO2) = 0.14 (±0.02), j((E)-4-oxo-2-pentenal)/j(NO2) = 0.18 (±0.01), and j((Z)-4-oxo-2-pentenal)/j(NO2) = 0.20 (±0.03). The major products detected for both species are a furanone (30-42%) and, for (E)-2-butenedial, maleic anhydride (2,5-furandione) (12-14%). The mechanism appears to proceed predominantly via photoisomerization to a ketene-enol species following γ-H abstraction. The lifetimes of the ketene-enol species in the dark from 2-butenedial and 4-oxo-2-pentenal are determined to be 465 s and 235 s, respectively. The ketene-enol can undergo ring closure to yield the corresponding furanone, or further unimolecular rearrangement which can subsequently form maleic anhydride. A minor channel (10-15%) also appears to form CO directly. This is presumed to be via a molecular elimination route of an initial biradical intermediate formed in photolysis, with an unsaturated carbonyl (detected here but not quantified) as co-product. α-Dicarbonyl and radical yields are very low, which has implications for ozone production from the photo-oxidation of unsaturated 1,4-dicarbonyls in the boundary layer. Photochemical removal is determined to be the major loss process for these species in the boundary layer with lifetimes of the order of 10-15 minutes, compared to >3 hours for reaction with OH.

Characterization of Primary Organic Aerosol from Domestic Wood, Peat, and Coal Burning in Ireland.

An aerosol chemical speciation monitor (ACSM) was deployed to study the primary nonrefractory submicron particulate matter emissions from the burning of commercially available solid fuels (peat, coal, and wood) typically used in European domestic fuel stoves. Organic mass spectra (MS) from burning wood, peat, and coal were characterized and intercompared for factor analysis against ambient data. The reference profiles characterized in this study were used to estimate the contribution of solid fuel sources, along with oil combustion, to ambient pollution in Galway, Ireland using the multilinear engine (ME-2). During periods influenced by marine air masses, local source contribution had dominant impact and nonsea-spray primary organic emissions comprised 88% of total organic aerosol mass, with peat burning found to be the greatest contributor (39%), followed by oil (21%), coal (17%), and wood (11%). In contrast, the resolved oxygenated organic aerosol (OOA) dominated the aerosol composition in continental air masses, with contributions of 50%, compared to 12% in marine air masses. The source apportionment results suggest that the use of domestic solid fuels (peat, wood, and coal) for home heating is the major source of evening and night-time particulate pollution events despite their small use.

Simulation of particle diversity and mixing state over Greater Paris: a model-measurement inter-comparison.

Air quality models are used to simulate and forecast pollutant concentrations, from continental scales to regional and urban scales. These models usually assume that particles are internally mixed, i.e. particles of the same size have the same chemical composition, which may vary in space and time. Although this assumption may be realistic for continental-scale simulations, where particles originating from different sources have undergone sufficient mixing to achieve a common chemical composition for a given model grid cell and time, it may not be valid for urban-scale simulations, where particles from different sources interact on shorter time scales. To investigate the role of the mixing state assumption on the formation of particles, a size-composition resolved aerosol model (SCRAM) was developed and coupled to the Polyphemus air quality platform. Two simulations, one with the internal mixing hypothesis and another with the external mixing hypothesis, have been carried out for the period 15 January to 11 February 2010, when the MEGAPOLI winter field measurement campaign took place in Paris. The simulated bulk concentrations of chemical species and the concentrations of individual particle classes are compared with the observations of Healy et al. (Atmos. Chem. Phys., 2013, 13, 9479-9496) for the same period. The single particle diversity and the mixing-state index are computed based on the approach developed by Riemer et al. (Atmos. Chem. Phys., 2013, 13, 11423-11439), and they are compared to the measurement-based analyses of Healy et al. (Atmos. Chem. Phys., 2014, 14, 6289-6299). The average value of the single particle diversity, which represents the average number of species within each particle, is consistent between simulation and measurement (2.91 and 2.79 respectively). Furthermore, the average value of the mixing-state index is also well represented in the simulation (69% against 59% from the measurements). The spatial distribution of the mixing-state index shows that the particles are not mixed in urban areas, while they are well mixed in rural areas. This indicates that the assumption of internal mixing traditionally used in transport chemistry models is well suited to rural areas, but this assumption is less realistic for urban areas close to emission sources.

Molecular composition of organic aerosols at urban background and road tunnel sites using ultra-high resolution mass spectrometry.

Organic aerosol composition in the urban atmosphere is highly complex and strongly influenced by vehicular emissions which vary according to the make-up of the vehicle fleet. Normalized test measurements do not necessarily reflect real-world emission profiles and road tunnels are therefore ideal locations to characterise realistic traffic particle emissions with minimal interference from other particle sources and from atmospheric aging processes affecting their composition. In the current study, the composition of fine particles (diameter ≤2.5 µm) at an urban background site (Elms Road Observatory Site) and a road tunnel (Queensway) in Birmingham, UK, were analysed with direct infusion, nano-electrospray ionisation ultrahigh resolution mass spectrometry (UHRMS). The overall particle composition at these two sites is compared with an industrial harbour site in Cork, Ireland, with special emphasis on oxidised mono-aromatics, polycyclic aromatic hydrocarbons (PAHs) and nitro-aromatics. Different classification criteria, such as double bond equivalents, aromaticity index and aromaticity equivalent are used and compared to assess the fraction of aromatic components in the approximately one thousand oxidized organic compounds at the different sampling locations.

Single-particle speciation of alkylamines in ambient aerosol at five European sites.

Alkylamines are associated with both natural and anthropogenic sources and have been detected in ambient aerosol in a variety of environments. However, little is known about the ubiquity or relative abundance of these species in Europe. In this work, ambient single-particle mass spectra collected at five sampling sites across Europe have been analysed for their alkylamine content. The aerosol time-of-flight mass spectrometer (ATOFMS) data used were collected in Ireland (Cork), France (Paris, Dunkirk and Corsica) and Switzerland (Zurich) between 2008 and 2013. Each dataset was queried for mass spectral marker ions associated with the following ambient alkylamines: dimethylamine (DMA), trimethylamine (TMA), diethylamine (DEA), triethylamine (TEA), dipropylamine (DPA) and tripropylamine (TPA). The fraction of ambient particles that contained detectable alkylamines ranged from 1 to 17 % depending on location, with the highest fractions observed in Paris and Zurich in the winter months. The lowest fractions were observed at coastal sites, where the influence of animal husbandry-related alkylamine emissions is also expected to be lowest. TMA was the most ubiquitous particle phase alkylamine detected and was observed at all locations. Alkylamines were found to be internally mixed with both sulphate and nitrate for each dataset, suggesting that aminium salt formation may be important at all sites investigated. Interestingly, in Corsica, all alkylamine particles detected were also found to be internally mixed with methanesulphonic acid (MSA), indicating that aminium methanesulphonate salts may represent a component of marine ambient aerosol in the summer months. Internal mixing of alkylamines with sea salt was not observed, however. Alkylamine-containing particle composition was found to be reasonably homogeneous at each location, with the exception of the Corsica and Dunkirk sites, where two and four distinct mixing states were observed, respectively.

Gas- and Particle-Phase Products from the Chlorine-Initiated Oxidation of Polycyclic Aromatic Hydrocarbons.

The chlorine atom (Cl)-initiated oxidation of three polycyclic aromatic hydrocarbons (PAHs; namely, naphthalene, acenaphthylene, and acenaphthene) was investigated. Experiments were performed in an atmospheric simulation chamber using a proton transfer reaction time-of-flight mass spectrometer (TOF-MS) and an aerosol TOF-MS to characterize the oxidation products in the gas and particle phases, respectively. The major products identified from the reaction of Cl atoms with naphthalene were phthalic anhydride and chloronaphthalene, indicating that H atom abstraction and Cl addition reaction pathways are both important. Acenaphthenone was the principal product arising from reaction of Cl with acenaphthene, while 1,8-naphthalic anhydride, acenaphthenone, acenaphthenequinone, and chloroacenaphthenone were all identified as products of acenaphthylene oxidation, confirming that the cylcopenta-fused ring controls the reactivity of these PAHs toward Cl atoms. Possible reaction mechanisms are proposed for the formation of these products, and favored pathways have been suggested. Large yields of secondary organic aerosol (SOA) were also observed in all experiments, and the major products were found to undergo significant partitioning to the particle-phase. This work suggests that Cl-initiated oxidation could play an important role in SOA formation from PAHs under specific atmospheric conditions where the Cl atom concentration is high, such as the marine boundary layer.

Kinetics of the gas-phase reactions of chlorine atoms with naphthalene, acenaphthene, and acenaphthylene.

Reactions of polycyclic aromatic hydrocarbons (PAHs) with chlorine atoms may occur in specific areas such as coastal regions and the marine boundary layer. In this work, rate constants for the gas-phase reactions of naphthalene, acenaphthene, and acenaphthylene with chlorine atoms have been measured using the relative rate technique. Experiments were performed at room temperature (293 ± 2 K) and atmospheric pressure in an atmospheric simulation chamber using a proton-transfer reaction mass spectrometer (PTR-MS) to monitor the concentrations of PAHs and the reference compounds (acetone, methanol, 1,3,5-trimethylbenzene, and isoprene) as a function of time. The rate constants obtained in this work were (in units of cm(3) molecule(-1) s(-1)) (4.22 ± 0.46) × 10(-12), (3.01 ± 0.82) × 10(-10), and (4.69 ± 0.82) × 10(-10) for naphthalene, acenaphthene, and acenaphthylene, respectively. These are the first measurements of the rate constants for gas-phase reactions of Cl atoms with acenaphthene and acenaphthylene. The rate constant determined in this study for the reaction of naphthalene with Cl atoms is not in agreement with the only other previously reported value in the literature. The results are used to assess the potential role of chlorine atom reactions in the atmospheric oxidation of PAHs.

Recent advances in the stabilization of monomeric stibinidene chalcogenides and stibine chalcogenides.

The elucidation of novel bonding situations at heavy p-block elements has greatly advanced recent efforts to access useful reactivity at earth-abundant main-group elements. Molecules with unsaturated bonds between heavier, electropositive elements and lighter, electronegative elements are often highly polarized and competent in small-molecule activations, but the reactivity of these molecules may be quenched by self-association of monomers to form oligomeric species where the polar, unsaturated groups are assembled in a head-to-tail fashion. In this Frontier, we discuss the synthetic strategies employed to isolate monomeric σ2,λ3-stibinidene chalcogenides (RSbCh) and monomeric σ4,λ5-stibine chalcogenides (R3SbCh). These classes of molecules each feature polarized antimony-chalcogenide bonds (Sb = Ch/Sb+-Ch-). We highlight how the synthesis and isolation of these molecules has led to the discovery of novel reactivity and has shed light on fundamental aspects of inorganic structure and bonding. Despite these advances, there are critical aspects of this chemistry that remain underdeveloped and we provide our perspective on yet-unrealized synthetic targets that may be achieved with the continued development of the strategies described herein.

Disease types and pathogenic mechanisms induced by PM2.5 in five human systems: An analysis using omics and human disease databases.

Atmospheric fine particulate matter (PM2.5) can harm various systems in the human body. Due to limitations in the current understanding of epidemiology and toxicology, the disease types and pathogenic mechanisms induced by PM2.5 in various human systems remain unclear. In this study, the disease types induced by PM2.5 in the respiratory, circulatory, endocrine, and female and male urogenital systems have been investigated and the pathogenic mechanisms identified at molecular level. The results reveal that PM2.5 is highly likely to induce pulmonary emphysema, reperfusion injury, malignant thyroid neoplasm, ovarian endometriosis, and nephritis in each of the above systems respectively. The most important co-existing gene, cellular component, biological process, molecular function, and pathway in the five systems targeted by PM2.5 are Fos proto-oncogene (FOS), extracellular matrix, urogenital system development, extracellular matrix structural constituent conferring tensile strength, and ferroptosis respectively. Differentially expressed genes that are significantly and uniquely targeted by PM2.5 in each system are BTG2 (respiratory), BIRC5 (circulatory), NFE2L2 (endocrine), TBK1 (female urogenital) and STAT1 (male urogenital). Important disease-related cellular components, biological processes, and molecular functions are specifically induced by PM2.5. For example, response to wounding, blood vessel morphogenesis, body morphogenesis, negative regulation of response to endoplasmic reticulum stress, and response to type I interferon are the top uniquely existing biological processes in each system respectively. PM2.5 mainly acts on key disease-related pathways such as the PD-L1 expression and PD-1 checkpoint pathway in cancer (respiratory), cell cycle (circulatory), apoptosis (endocrine), antigen processing and presentation (female urogenital), and neuroactive ligand-receptor interaction (male urogenital). This study provides a novel analysis strategy for elucidating PM2.5-related disease types and is an important supplement to epidemiological investigation. It clarifies the risks of PM2.5 exposure, elucidates the pathogenic mechanisms, and provides scientific support for promoting the precise prevention and treatment of PM2.5-related diseases.

Entomological assessment of hessian fabric transfluthrin vapour emanators for protecting against outdoor-biting Aedes aegypti in coastal Tanzania.

BACKGROUND: A low technology emanator device for slowly releasing vapour of the volatile pyrethroid transfluthrin was recently developed in Tanzania that provides robust protection against night biting Anopheles and Culex vectors of malaria and filariasis for several months. Here these same emanator devices were assessed in Dar es Salaam city, as a means of protection against outdoor-biting Aedes (Stegomia) aegypti, the most important vector of human arboviruses worldwide, in parallel with similar studies in Haiti and Brazil. METHODS: A series of entomological experiments were conducted under field and semi-field conditions, to evaluate whether transfluthrin emanators protect against wild Ae. aegypti, and also compare the transfluthrin responsiveness of Ae. aegypti originating from wild-caught eggs to established pyrethroid-susceptible Ae. aegypti and Anopheles gambiae colonies. Preliminary measurements of transfluthrin vapour concentration in air samples collected near treated emanators were conducted by gas chromatography-mass spectrometry. RESULTS: Two full field experiments with four different emanator designs and three different transfluthrin formulations consistently indicated negligible reduction of human landing rates by wild Ae. aegypti. Under semi-field conditions in large cages, 50 to 60% reductions of landing rates were observed, regardless of which transfluthrin dose, capture method, emanator placement position, or source of mosquitoes (mildly pyrethroid resistant wild caught Ae. aegypti or pyrethroid-susceptible colonies of Ae. aegypti and An. gambiae) was used. Air samples collected immediately downwind from an emanator treated with the highest transfluthrin dose (15g), contained 12 to 19 µg/m3 transfluthrin vapour. CONCLUSIONS: It appears unlikely that the moderate levels of pyrethroid resistance observed in wild Ae. aegypti can explain the modest-to-undetectable levels of protection exhibited. While potential inhalation exposure could be of concern for the highest (15g) dose evaluated, 3g of transfluthrin appears sufficient to achieve the modest levels of protection that were demonstrated entomologically. While the generally low levels of protection against Aedes reported here from Tanzania, and from similar entomological studies in Haiti and Brazil, are discouraging, complementary social science studies in Haiti and Brazil suggest end-users perceive valuable levels of protection against mosquitoes. It therefore remains unclear whether transfluthrin emanators have potential for protecting against Aedes vectors of important human arboviruses.

Variation in pnictogen-oxygen bonding unlocks greatly enhanced Brønsted basicity for the monomeric stibine oxide.

Phosphine oxides and arsine oxides feature highly polarized pnictoryl groups (Pn+-O-/Pn = O; Pn = P, As) and react as Brønsted bases through O-centered lone pairs. We recently reported the first example of a monomeric stibine oxide, Dipp3SbO (Dipp = diisopropylphenyl), allowing periodic trends in pnictoryl bonding to be extended to antimony for the first time. Computational studies suggest that, as the pnictogen atom becomes heavier, delocalization of electron density from the O-centered lone pairs to the Pn-C σ* orbitals is attenuated, destabilizing the lone pairs and increasing the donor capacity of the pnictine oxide. Herein, we assess the Brønsted basicity of a series of monomeric pnictine oxides (Dipp3PnO; Pn = P, As, and Sb). Stoichiometric reactivity between Dipp3PnO and a series of acids demonstrates the greatly enhanced ability of Dipp3SbO to accept protons relative to the lighter congeners, consistent with theoretical isodesmic reaction enthalpies and proton affinities. 1H NMR spectrometric titrations allow for the pKaH,MeCN determination of Dipp3AsO and Dipp3SbO, revealing a 106-fold increase in Brønsted basicity from Dipp3AsO to Dipp3SbO. The increased basicity can be exploited in catalysis; Dipp3SbO exhibits dramatically increased catalytic efficiency in the Brønsted base-catalyzed transesterification between p-nitrophenyl acetate and 2,2,2-trifluoroethanol. Our results unambiguously confirm the drastic increase in Brønsted basicity from Dipp3PO < Dipp3AsO < Dipp3SbO, a direct consequence of the variation in the electronic structure of the pnictoryl bond as the pnictogen atom increases in atomic number.

Isolation, bonding and reactivity of a monomeric stibine oxide.

In contrast to phosphine oxides and arsine oxides, which are common and exist as stable monomeric species featuring the corresponding pnictoryl functional group (Pn=O/Pn+-O-; Pn = P, As), stibine oxides are generally polymeric, and the properties of the unperturbed stiboryl group (Sb=O/Sb+-O-) remain unexplored. We now report the isolation of the monomeric stibine oxide, Dipp3SbO (where Dipp = 2,6-diisopropylphenyl). Spectroscopic, crystallographic and computational studies provide insight into the nature of the Sb=O/Sb+-O- bond. Moreover, isolation of Dipp3SbO allows the chemistry of the stiboryl group to be explored. Here we show that Dipp3SbO can act as a Brønsted base, a hydrogen-bond acceptor and a transition-metal ligand, in addition engaging in 1,2-addition, O-for-F2 exchange and O-atom transfer. In all cases, the reactivity of Dipp3SbO differed from that of the lighter congeners Dipp3AsO and Dipp3PO.

Rapid formation of secondary organic aerosol from the photolysis of 1-nitronaphthalene: role of naphthoxy radical self-reaction.

The chemical composition of secondary organic aerosol (SOA) formed from the photolysis of 1-nitronaphthalene in a series of simulation chamber experiments has been investigated using an aerosol time-of-flight mass spectrometer (ATOFMS). The resulting SOA is characterized by the presence of a dimer (286 Da) proposed to be formed through the self-reaction of naphthoxy radicals along with the expected product nitronaphthol. The molecular formulas of the SOA products were confirmed by collecting filter samples and analyzing the extracts using ultrahigh resolution mass spectrometry. Further evidence for the radical self-reaction mechanism was obtained by photolyzing 1-nitronaphthalene in the presence of excess nitrobenzene, where it was shown that the resulting SOA contained a product consistent with the cross-reaction of phenoxy and naphthoxy radicals. The naphthoxy dimer was formed from the photolysis of 1-nitronaphthalene under a variety of different experimental conditions including the presence of excess butyl ether as an OH scavenger and the presence of ambient air and particles. However, formation of the dimer was suppressed when 1-nitronaphthalene was photolyzed in the presence of excess NO and nitronaphthol was instead found to be the dominant particle-phase product indicating that the yield of the dimer is dependent upon the concentration of pre-existing NO(x). The results of this work suggest that photolysis of 1-nitronaphthalene represents a previously unidentified pathway to SOA formation in the troposphere. Analogous mechanisms may also be important for other nitrated polycyclic aromatic hydrocarbons.

A new on-line SPE LC-HRMS method for the analysis of Perfluoroalkyl and Polyfluoroalkyl Substances (PFAS) in PM2.5 and its application for screening atmospheric particulates from Dublin and Enniscorthy, Ireland.

A sensitive analytical method has been developed and validated for the determination of 16 polyfluorinated alkyl substances (PFAS) in fine airborne particulate matter (PM2.5) using on-line solid phase extraction (SPE) coupled with liquid chromatography (LC) - negative electrospray ionisation high resolution mass spectrometry (-) ESI-HRMS. On-line SPE allows simultaneous sample clean-up from interfering matrices and lower limits of detection (LODs) by injecting a large volume of sample into the LC system without compromising chromatographic efficiency and resolution. The method provides LODs in the range 0.08-0.5 pg/mL of sample extract allowing detection of selected PFAS in aerosol particles at low fg/m3 level and showed good tolerance to the considered PM matrix. The validated method was applied for analysis of PFAS in ambient PM2.5 samples collected at two urban locations in Ireland, i.e., Enniscorthy and Dublin. Several PFAS were observed above the detection limit, including perfluorobutyrate (PFBA), perfluorooctanoic acid (PFOA), perfluorooctanesulfonic acid (PFOS), perfluorobutanesulfonic acid (L-PFBS) and perfluorononanoic acid (PFNA), as well as fluorotelomer sulfonates: 4:2 FTS, 6:2 FTS and 8:2 FTS. The results indicate that some toxic PFAS, such as PFOS and PFOA, are still detected in the environment despite being phased out from production and subject to restricted use in the EU and USA for more than two decades. Observation of fluorotelomer sulfonates (4:2 FTS, 6:2 FTS and 8:2 FTS, which are used as alternatives for legacy PFOA and PFOS) in ambient PM2.5 samples raises a concern about their persistence in the atmosphere and impact on human health considering emerging evidence that they could have similar health endpoints as PFOA and PFOS. To our knowledge, this is the first study to identify PFAS in ambient PM2.5 at urban locations in Ireland and also the first study to detect 4:2 and 8:2 fluorotelomer sulfonates in atmospheric aerosol particles.

Real-time Monitoring of Aerosol Generating Dental Procedures.

OBJECTIVE: We aimed to quantify aerosol concentrations produced during different dental procedures under different mitigation processes. METHOD: Aerosol concentrations were measured by the Optical Particle Sensor (OPS) and Wideband Integrated Bioaerosol Sensor (WIBS) during routine, time-recorded dental procedures on a manikin head in a partitioned enclosure. Four different, standardised dental procedures were repeated in triplicate for three different mitigation measures. RESULT: Both high-volume evacuation (HVE) and HVE plus local exhaust ventilation (LEV) eradicated all procedure-related aerosols, and the enclosure stopped procedure-related aerosols escaping. Aerosols recorded by the OPS and WIBS were 84 and 16-fold higher than background levels during tooth 16 FDI notation (UR6) drilling, and 11 and 24-fold higher during tooth 46 FDI notation (LR6) drilling, respectively. Ultrasonic scaling around the full lower arch (CL) or the full upper arch (CU) did not generate detectable aerosols with mitigation applied. Without mitigation the largest concentration of inhalable particles during procedures observed by the WIBS and OPS was during LR6 (139/cm3) and UR6 (28/cm3) drilling, respectively. Brief aerosol bursts were recorded during drilling procedures with HVE, these did not occur with LEV, suggesting LEV provides protection against operator errors. Variation was observed in necessary fallow times (49 - 280 minutes) without mitigation, while no particles remained airborne when mitigation was utilised. CONCLUSION: This data demonstrates that correctly positioned HVE or LEV is effective in preventing airborne spread and persistence of inhalable particles originating from dental AGPs. Additionally, a simple enclosure restricts the spread of aerosols outside of the operating area. CLINICAL SIGNIFICANCE: Employing correctly positioned HVE and LEV in non-mechanically ventilated clinics can prevent the dispersal and persistence of inhalable airborne particles during dental AGPs. Moreover, using enclosures have the additive effect of restricting aerosol spread outside of an operating area.