Toxicological inhalation studies in rats to substantiate grouping of zinc oxide nanoforms.

BACKGROUND: Significant variations exist in the forms of ZnO, making it impossible to test all forms in in vivo inhalation studies. Hence, grouping and read-across is a common approach under REACH to evaluate the toxicological profile of familiar substances. The objective of this paper is to investigate the potential role of dissolution, size, or coating in grouping ZnO (nano)forms for the purpose of hazard assessment. We performed a 90-day inhalation study (OECD test guideline no. (TG) 413) in rats combined with a reproduction/developmental (neuro)toxicity screening test (TG 421/424/426) with coated and uncoated ZnO nanoforms in comparison with microscale ZnO particles and soluble zinc sulfate. In addition, genotoxicity in the nasal cavity, lungs, liver, and bone marrow was examined via comet assay (TG 489) after 14-day inhalation exposure. RESULTS: ZnO nanoparticles caused local toxicity in the respiratory tract. Systemic effects that were not related to the local irritation were not observed. There was no indication of impaired fertility, developmental toxicity, or developmental neurotoxicity. No indication for genotoxicity of any of the test substances was observed. Local effects were similar across the different ZnO test substances and were reversible after the end of the exposure. CONCLUSION: With exception of local toxicity, this study could not confirm the occasional findings in some of the previous studies regarding the above-mentioned toxicological endpoints. The two representative ZnO nanoforms and the microscale particles showed similar local effects. The ZnO nanoforms most likely exhibit their effects by zinc ions as no particles could be detected after the end of the exposure, and exposure to rapidly soluble zinc sulfate had similar effects. Obviously, material differences between the ZnO particles do not substantially alter their toxicokinetics and toxicodynamics. The grouping of ZnO nanoforms into a set of similar nanoforms is justified by these observations.

An Adverse Outcome Pathway (AOP) for forestomach tumors induced by non-genotoxic initiating events.

The utility of rodent forestomach tumor data for hazard and risk assessment has been examined for decades because humans do not have a forestomach, and these tumors occur by varying modes of action (MOAs). We have used the MOA for ethyl acrylate (EA) to develop an Adverse Outcome Pathway (AOP) for forestomach tumors caused by non-genotoxic initiating events. These tumors occur secondary to site of contact induced epithelial cytotoxicity and regenerative repair-driven proliferation. For EA, the critical initiating event (IE) is epithelial cytotoxicity, and supporting key events (KEs) at the cellular and tissue level are increased cell proliferation (KE1) resulting in sustained hyperplasia (KE2), with the adverse outcome of forestomach papillomas and carcinomas. For EA, a pre-molecular initiating event (pre-MIE) of sustained glutathione depletion is probable. Supporting data from butylated hydroxyanisole (BHA) are also reviewed. Although there may be some variability in the pre-MIEs and IEs for BHA and EA, they share the same KEs, and evidence for BHA confers support for the AOP. Evolved Bradford Hill considerations of biological plausibility, essentiality, and empirical support were evaluated per OECD guidance. Although an MIE is not specifically described, overall confidence in the AOP is high due to well-developed and accepted evidence streams, and the AOP can be used for regulatory applications including hazard identification and risk assessment for chemicals that act by this AOP.

Assessment of the mode of action underlying development of forestomach tumors in rodents following oral exposure to ethyl acrylate and relevance to humans.

Chronic repeated gavage dosing of high concentrations of ethyl acrylate (EA) causes forestomach tumors in rats and mice. For two decades, there has been general consensus that these tumors are unique to rodents because of: i) lack of carcinogenicity in other organs, ii) specificity to the forestomach (an organ unique to rodents which humans do not possess), iii) lack of carcinogenicity by other routes of exposure, and iv) obvious site of contact toxicity at carcinogenic doses. In 1986, EA was classified as possibly carcinogenic to humans by the International Agency for Research on Cancer (IARC). However, by applying a MOA analyses and human relevance framework assessment, the weight-of-evidence supports a cytotoxic MOA with the following key events: i) bolus delivery of EA to forestomach lumen and subsequent absorption, ii) cytotoxicity likely due to saturation of enzymatic detoxification, iii) chronic regenerative hyperplasia, and iv) spontaneous mutation due to increased cell replication and cell population. Clonal expansion of initiated cells thus results in late onset tumorigenesis. The key events in this 'wound and healing' MOA provide high confidence in the MOA as assessed by evolved Bradford-Hill Criteria. The weight-of-evidence supported by the proposed MOA, combined with a unique tissue that does not exist in humans, indicates that EA is highly unlikely to pose a human cancer hazard.

An in vitro alveolar macrophage assay for predicting the short-term inhalation toxicity of nanomaterials.

BACKGROUND: Most in vitro studies investigating nanomaterial pulmonary toxicity poorly correlate to in vivo inhalation studies. Alveolar macrophages (AMs) play an outstanding role during inhalation exposure since they effectively clear the alveoli from particles. This study addresses the applicability of an in vitro alveolar macrophage assay to distinguish biologically active from passive nanomaterials. METHODS: Rat NR8383 alveolar macrophages were exposed to 18 inorganic nanomaterials, covering AlOOH, BaSO4, CeO2, Fe2O3, TiO2, ZrO2, and ZnO NMs, amorphous SiO2 and graphite nanoplatelets, and two nanosized organic pigments. ZrO2 and amorphous SiO2 were tested without and with surface functionalization. Non-nanosized quartz DQ12 and corundum were used as positive and negative controls, respectively. The test materials were incubated with the cells in protein-free culture medium. Lactate dehydrogenase, glucuronidase, and tumour necrosis factor alpha were assessed after 16 h. In parallel, H2O2 was assessed after 1.5 h. Using the no-observed-adverse-effect concentrations (NOAECs) from available rat short-term inhalation studies (STIS), the test materials were categorized as active (NOAEC < 10 mg/m(3)) or passive. RESULTS: In vitro data reflected the STIS categorization if a particle surface area-based threshold of <6000 mm(2)/mL was used to determine the biological relevance of the lowest observed significant in vitro effects. Significant effects that were recorded above this threshold were assessed as resulting from test material-unspecific cellular 'overload'. Test materials were assessed as active if ≥2 of the 4 in vitro parameters undercut this threshold. They were assessed as passive if 0 or 1 parameter was altered. An overall assay accuracy of 95 % was achieved. CONCLUSIONS: The in vitro NR8383 alveolar macrophage assay allows distinguishing active from passive nanomaterials. Thereby, it allows determining whether in vivo short-term inhalation testing is necessary for hazard assessment. Results may also be used to group nanomaterials by biological activity. Further work should aim at validating the assay.

Comparative short-term inhalation toxicity of five organic diketopyrrolopyrrole pigments and two inorganic iron-oxide-based pigments.

Diketopyrrolopyrroles (DPP) are a relatively new class of organic high-performance pigments. The present inhalation and particle characterization studies were performed to compare the effects of five DPP-based pigments (coarse and fine Pigment Red 254, coarse and fine meta-chloro DPP isomer and one form of mixed chlorinated DPP isomers) and compare it to coarse and fine inorganic Pigment Red 101. Wistar rats were exposed head-nose to atmospheres of the respective materials for 6 h/day on 5 consecutive days. Target concentrations were 30 mg/m(3) as high dose for all compounds and selected based occupational exposure limits for respirable nuisance dust. Toxicity was determined after end of exposure and after 3-week recovery using broncho-alveolar lavage fluid (BALF) and microscopic examinations of the entire respiratory tract. Mixed chlorinated DPP isomers and coarse meta-chloro DPP isomer caused marginal changes in BALF, consisting of slight increases of polymorphonuclear neutrophils, and in case of coarse meta-chloro DPP increased MCP-1 and osteopontin levels. Mixed chlorinated DPP isomers, Pigment Red 254, and meta-chloro DPP caused pigment deposits and phagocytosis by alveolar macrophages, slight hypertrophy/hyperplasia of the bronchioles and alveolar ducts, but without evidence of inflammation. In contrast, only pigment deposition and pigment phagocytosis were observed after exposure to Pigment Red 101. All pigments were tolerated well and caused only marginal effects in BALF or no effects at all. Only minor effects were seen on the lung by microscopic examination. There was no evidence of systemic inflammation based on acute-phase protein levels in blood.

Case studies putting the decision-making framework for the grouping and testing of nanomaterials (DF4nanoGrouping) into practice.

Case studies covering carbonaceous nanomaterials, metal oxide and metal sulphate nanomaterials, amorphous silica and organic pigments were performed to assess the Decision-making framework for the grouping and testing of nanomaterials (DF4nanoGrouping). The usefulness of the DF4nanoGrouping for nanomaterial hazard assessment was confirmed. In two tiers that rely exclusively on non-animal test methods followed by a third tier, if necessary, in which data from rat short-term inhalation studies are evaluated, nanomaterials are assigned to one of four main groups (MGs). The DF4nanoGrouping proved efficient in sorting out nanomaterials that could undergo hazard assessment without further testing. These are soluble nanomaterials (MG1) whose further hazard assessment should rely on read-across to the dissolved materials, high aspect-ratio nanomaterials (MG2) which could be assessed according to their potential fibre toxicity and passive nanomaterials (MG3) that only elicit effects under pulmonary overload conditions. Thereby, the DF4nanoGrouping allows identifying active nanomaterials (MG4) that merit in-depth investigations, and it provides a solid rationale for their sub-grouping to specify the further information needs. Finally, the evaluated case study materials may be used as source nanomaterials in future read-across applications. Overall, the DF4nanoGrouping is a hazard assessment strategy that strictly uses animals as a last resort.

A decision-making framework for the grouping and testing of nanomaterials (DF4nanoGrouping).

The European Centre for Ecotoxicology and Toxicology of Chemicals (ECETOC) 'Nano Task Force' proposes a Decision-making framework for the grouping and testing of nanomaterials (DF4nanoGrouping) that consists of 3 tiers to assign nanomaterials to 4 main groups, to perform sub-grouping within the main groups and to determine and refine specific information needs. The DF4nanoGrouping covers all relevant aspects of a nanomaterial's life cycle and biological pathways, i.e. intrinsic material and system-dependent properties, biopersistence, uptake and biodistribution, cellular and apical toxic effects. Use (including manufacture), release and route of exposure are applied as 'qualifiers' within the DF4nanoGrouping to determine if, e.g. nanomaterials cannot be released from a product matrix, which may justify the waiving of testing. The four main groups encompass (1) soluble nanomaterials, (2) biopersistent high aspect ratio nanomaterials, (3) passive nanomaterials, and (4) active nanomaterials. The DF4nanoGrouping aims to group nanomaterials by their specific mode-of-action that results in an apical toxic effect. This is eventually directed by a nanomaterial's intrinsic properties. However, since the exact correlation of intrinsic material properties and apical toxic effect is not yet established, the DF4nanoGrouping uses the 'functionality' of nanomaterials for grouping rather than relying on intrinsic material properties alone. Such functionalities include system-dependent material properties (such as dissolution rate in biologically relevant media), bio-physical interactions, in vitro effects and release and exposure. The DF4nanoGrouping is a hazard and risk assessment tool that applies modern toxicology and contributes to the sustainable development of nanotechnological products. It ensures that no studies are performed that do not provide crucial data and therefore saves animals and resources.

Applicability of rat precision-cut lung slices in evaluating nanomaterial cytotoxicity, apoptosis, oxidative stress, and inflammation.

The applicability of rat precision-cut lung slices (PCLuS) in detecting nanomaterial (NM) toxicity to the respiratory tract was investigated evaluating sixteen OECD reference NMs (TiO2, ZnO, CeO2, SiO2, Ag, multi-walled carbon nanotubes (MWCNTs)). Upon 24-hour test substance exposure, the PCLuS system was able to detect early events of NM toxicity: total protein, reduction in mitochondrial activity, caspase-3/-7 activation, glutathione depletion/increase, cytokine induction, and histopathological evaluation. Ion shedding NMS (ZnO and Ag) induced severe tissue destruction detected by the loss of total protein. Two anatase TiO2 NMs, CeO2 NMs, and two MWCNT caused significant (determined by trend analysis) cytotoxicity in the WST-1 assay. At non-cytotoxic concentrations, different TiO2 NMs and one MWCNT increased GSH levels, presumably a defense response to reactive oxygen species, and these substances further induced a variety of cytokines. One of the SiO2 NMs increased caspase-3/-7 activities at non-cytotoxic levels, and one rutile TiO2 only induced cytokines. Investigating these effects is, however, not sufficient to predict apical effects found in vivo. Reproducibility of test substance measurements was not fully satisfactory, especially in the GSH and cytokine assays. Effects were frequently observed in negative controls pointing to tissue slice vulnerability even though prepared and handled with utmost care. Comparisons of the effects observed in the PCLuS to in vivo effects reveal some concordances for the metal oxide NMs, but less so for the MWCNT. The highest effective dosages, however, exceeded those reported for rat short-term inhalation studies. To become applicable for NM testing, the PCLuS system requires test protocol optimization.

Application of short-term inhalation studies to assess the inhalation toxicity of nanomaterials.

BACKGROUND: A standard short-term inhalation study (STIS) was applied for hazard assessment of 13 metal oxide nanomaterials and micron-scale zinc oxide. METHODS: Rats were exposed to test material aerosols (ranging from 0.5 to 50 mg/m3) for five consecutive days with 14- or 21-day post-exposure observation. Bronchoalveolar lavage fluid (BALF) and histopathological sections of the entire respiratory tract were examined. Pulmonary deposition and clearance and test material translocation into extra-pulmonary organs were assessed. RESULTS: Inhaled nanomaterials were found in the lung, in alveolar macrophages, and in the draining lymph nodes. Polyacrylate-coated silica was also found in the spleen, and both zinc oxides elicited olfactory epithelium necrosis. None of the other nanomaterials was recorded in extra-pulmonary organs. Eight nanomaterials did not elicit pulmonary effects, and their no observed adverse effect concentrations (NOAECs) were at least 10 mg/m3. Five materials (coated nano-TiO2, both ZnO, both CeO2) evoked concentration-dependent transient pulmonary inflammation. Most effects were at least partially reversible during the post-exposure period.Based on the NOAECs that were derived from quantitative parameters, with BALF polymorphonuclear (PMN) neutrophil counts and total protein concentration being most sensitive, or from the severity of histopathological findings, the materials were ranked by increasing toxic potency into 3 grades: lower toxic potency: BaSO4; SiO2.acrylate (by local NOAEC); SiO2.PEG; SiO2.phosphate; SiO2.amino; nano-ZrO2; ZrO2.TODA; ZrO2.acrylate; medium toxic potency: SiO2.naked; higher toxic potency: coated nano-TiO2; nano-CeO2; Al-doped nano-CeO2; micron-scale ZnO; coated nano-ZnO (and SiO2.acrylate by systemic no observed effect concentration (NOEC)). CONCLUSION: The STIS revealed the type of effects of 13 nanomaterials, and micron-scale ZnO, information on their toxic potency, and the location and reversibility of effects. Assessment of lung burden and material translocation provided preliminary biokinetic information. Based upon the study results, the STIS protocol was re-assessed and preliminary suggestions regarding the grouping of nanomaterials for safety assessment were spelled out.

Time course of lung retention and toxicity of inhaled particles: short-term exposure to nano-Ceria.

Two Ceria nanomaterials (NM-211 and NM-212) were tested for inhalation toxicity and organ burdens in order to design a chronic and carcinogenicity inhalation study (OECD TG No. 453). Rats inhaled aerosol concentrations of 0.5, 5, and 25 mg/m(3) by whole-body exposure for 6 h/day on 5 consecutive days for 1 or 4 weeks with a post-exposure period of 24 or 129 days, respectively. Lungs were examined by bronchoalveolar lavage and histopathology. Inhaled Ceria is deposited in the lung and cleared with a half-time of 40 days; at aerosol concentrations higher than 0.5 mg/m(3), this clearance was impaired resulting in a half-time above 200 days (25 mg/m(3)). After 5 days, Ceria (>0.5 mg/m(3)) induced an early inflammatory reaction by increases of neutrophils in the lung which decreased with time, with sustained exposure, and also after the exposure was terminated (during the post-exposure period). The neutrophil number observed in bronchoalveolar lavage fluid (BALF) was decreasing and supplemented by mononuclear cells, especially macrophages which were visible in histopathology but not in BALF. Further progression to granulomatous inflammation was observed 4 weeks post-exposure. The surface area of the particles provided a dose metrics with the best correlation of the two Ceria's inflammatory responses; hence, the inflammation appears to be directed by the particle surface rather than mass or volume in the lung. Observing the time course of lung burden and inflammation, it appears that the dose rate of particle deposition drove an initial inflammatory reaction by neutrophils. The later phase (after 4 weeks) was dominated by mononuclear cells, especially macrophages. The progression toward the subsequent granulomatous reaction was driven by the duration and amount of the particles in the lung. The further progression of the biological response will be determined in the ongoing long-term study.

A critical appraisal of existing concepts for the grouping of nanomaterials.

The grouping of substances serves to streamline testing for regulatory purposes. General grouping approaches for chemicals have been implemented in, e.g., the EU chemicals regulation. While specific regulatory frameworks for the grouping of nanomaterials are unavailable, this topic is addressed in different publications, and preliminary guidance is provided in the context of substance-related legislation or the occupational setting. The European Centre for Ecotoxicology and Toxicology of Chemicals Task Force on the Grouping of Nanomaterials reviewed available concepts for the grouping of nanomaterials for human health risk assessment. In their broad conceptual design, the evaluated approaches are consistent or complement each other. All go beyond the determination of mere structure-activity relationships and are founded on different aspects of the nanomaterial life cycle. These include the NM's material properties and biophysical interactions, specific types of use and exposure, uptake and kinetics, and possible early and apical biological effects. None of the evaluated grouping concepts fully take into account all of these aspects. Subsequent work of the Task Force will aim at combining the available concepts into a comprehensive 'multiple perspective' framework for the grouping of nanomaterials that will address all of the mentioned aspects of their life cycles.

Comparative inhalation toxicity of multi-wall carbon nanotubes, graphene, graphite nanoplatelets and low surface carbon black.

BACKGROUND: Carbon nanotubes, graphene, graphite nanoplatelets and carbon black are seemingly chemically identical carbon-based nano-materials with broad technological applications. Carbon nanotubes and carbon black possess different inhalation toxicities, whereas little is known about graphene and graphite nanoplatelets. METHODS: In order to compare the inhalation toxicity of the mentioned carbon-based nanomaterials, male Wistar rats were exposed head-nose to atmospheres of the respective materials for 6 hours per day on 5 consecutive days. Target concentrations were 0.1, 0.5, or 2.5 mg/m3 for multi-wall carbon nanotubes and 0.5, 2.5, or 10 mg/m3 for graphene, graphite nanoplatelets and low-surface carbon black. Toxicity was determined after end of exposure and after three-week recovery using broncho-alveolar lavage fluid and microscopic examinations of the entire respiratory tract. RESULTS: No adverse effects were observed after inhalation exposure to 10 mg/m3 graphite nanoplatelets or relatively low specific surface area carbon black. Increases of lavage markers indicative for inflammatory processes started at exposure concentration of 0.5 mg/m3 for multi-wall carbon nanotubes and 10 mg/m3 for graphene. Consistent with the changes in lavage fluid, microgranulomas were observed at 2.5 mg/m3 multi-wall carbon nanotubes and 10 mg/m3 graphene. In order to evaluate volumetric loading of the lung as the key parameter driving the toxicity, deposited particle volume was calculated, taking into account different methods to determine the agglomerate density. However, the calculated volumetric load did not correlate to the toxicity, nor did the particle surface burden of the lung. CONCLUSIONS: The inhalation toxicity of the investigated carbon-based materials is likely to be a complex interaction of several parameters. Until the properties which govern the toxicity are identified, testing by short-term inhalation is the best option to identify hazardous properties in order to avoid unsafe applications or select safer alternatives for a given application.

Toxico-/biokinetics of nanomaterials.

Nanomaterials (NM) offer great technological advantages but their risks to human health are still under discussion. For toxicological testing and evaluation, information on the toxicokinetics of NM is essential as it is different from that of most other xenobiotics. This review provides an overview on the toxicokinetics of NM available to date. The toxicokinetics of NM depends on particle size and shape, protein binding, agglomeration, hydrophobicity, surface charge and protein binding. In most studies with topical skin application, unintentional permeation and systemic availability were not observed; permeation for some NM with distinct properties was observed in animals. Upon inhalation, low levels of primary model nanoparticles became systemically available, but many real-world engineered NM aggregate in aerosols, do not disintegrate in the lung, and do not become systemically available. NM are prone to lymphatic transport, and many NM are taken up by the mononuclear phagocyte system (MPS) acting as a depot. Their half-life in blood depends on their uptake by MPS rather than their elimination from the body. NM reaching the GI tract are excreted with the feces, but of some NM low levels are absorbed and become systemically available. Some quantum dots were not observably excreted in urine nor in feces. Some model quantum dots, however, were efficiently excreted by the kidneys below, but not above 5-6 nm hydrodynamic diameter, while nanotubes 20-30 nm thick and 500-2,000 nm long were abundant in urine. NM are typically not metabolized. Some NM cross the blood-brain barrier favored by a negative surface charge.

Hazard identification of inhaled nanomaterials: making use of short-term inhalation studies.

A major health concern for nanomaterials is their potential toxic effect after inhalation of dusts. Correspondingly, the core element of tier 1 in the currently proposed integrated testing strategy (ITS) is a short-term rat inhalation study (STIS) for this route of exposure. STIS comprises a comprehensive scheme of biological effects and marker determination in order to generate appropriate information on early key elements of pathogenesis, such as inflammatory reactions in the lung and indications of effects in other organs. Within the STIS information on the persistence, progression and/or regression of effects is obtained. The STIS also addresses organ burden in the lung and potential translocation to other tissues. Up to now, STIS was performed in research projects and routine testing of nanomaterials. Meanwhile, rat STIS results for more than 20 nanomaterials are available including the representative nanomaterials listed by the Organization for Economic Cooperation and Development (OECD) working party on manufactured nanomaterials (WPMN), which has endorsed a list of representative manufactured nanomaterials (MN) as well as a set of relevant endpoints to be addressed. Here, results of STIS carried out with different nanomaterials are discussed as case studies. The ranking of different nanomaterials potential to induce adverse effects and the ranking of the respective NOAEC are the same among the STIS and the corresponding subchronic and chronic studies. In another case study, a translocation of a coated silica nanomaterial was judged critical for its safety assessment. Thus, STIS enables application of the proposed ITS, as long as reliable and relevant in vitro methods for the tier 1 testing are still missing. Compared to traditional subacute and subchronic inhalation testing (according to OECD test guidelines 412 and 413), STIS uses less animals and resources and offers additional information on organ burden and progression or regression of potential effects.

Nanostructured calcium silicate hydrate seeds accelerate concrete hardening: a combined assessment of benefits and risks.

Nanotechnology creates new possibilities to control and improve material properties for civil infrastructure. Special focus in this area is put on Portland cement and gypsum. Together their annual production is by far larger than for any other material worldwide. Nanomodification of these materials can be done during the few hours between dissolution and hardening, especially by nucleation of the re-crystallization with suitable colloids. Here we report first results in homogeneous seeding of the precipitation of calcium silicate hydrates within a real Portland cement composition. The occupational safety during the production phase and during mixing of concrete paste is addressed in detail by in vivo testing. We perform 5-day inhalation with 21-day recovery in rats and analyze organ-specific toxicity and 71 endpoints from bronchoalveolar lavage (BALF) and blood. In BALF parameters, no test-related changes were observed, indicating the generally low toxicity of the test material. Some mild lesions were observed in larynx level. In the lungs, all animals of the 50 mg/m³ concentration group revealed a minimal to mild increase in alveolar macrophages, which recovered back to control level.

Short-term rat inhalation study with aerosols of acrylic ester-based polymer dispersions containing a fraction of nanoparticles.

Aqueous polymer dispersions are important raw materials used in a variety of industrial processes. They may contain particles with diameters ranging from 10 to 1500 nm. Polymer exposure alone may cause pulmonary lesions after inhalation exposure. Polymer dispersions with increased proportions of nano-sized particles are being developed for improved material characteristics, and this may pose even increased pulmonary hazards upon potential inhalation exposure. In a 5-day screening study, male rats were nose-only exposed to aerosols generated from 2 dispersions of acrylic ester polymers with identical chemical composition but different nano-sized particle proportions at particle concentrations of 3 and 10 mg/m³. Immediately and 19 days after the end of inhalation, necropsies were conducted with major emphasis on respiratory tract histopathology. Three and 23 days after the end of inhalation, bronchoalveolar lavage was performed to screen for early pulmonary injury and inflammation. In contrast to the adverse effects known for other materials in short-term inhalation studies, none of the tested preparations of acrylic ester polymers elicited any adverse effect at the end of the inhalation or postinhalation periods. No shift in toxicity could be observed by the increased proportion of nano-sized polymer particles. Under the conditions of this study, the no observable adverse effect levels for both preparations were >10 mg/m³, that is 2- to 3-fold beyond current nuisance dust threshold limit values.

On the lifecycle of nanocomposites: comparing released fragments and their in-vivo hazards from three release mechanisms and four nanocomposites.

Nanocomposites are the dominating class of nanomaterials to come into consumer contact, and were in general assumed to pose low risk. The first data is now emerging on the exposure from nanocomposites, but little is yet known about their hypothetical nanospecific physiological effects, giving ample room for speculation. For the first time, this comprehensive study addresses these aspects in a systematic series of thermoplastic and cementitious nanocomposite materials. Earlier reports that 'chalking', the release of pigments from weathered paints, also occurs for nanocomposites, are confirmed. In contrast, mechanical forces by normal consumer use or do-it-yourself sanding do not disrupt nanofillers (nanoparticles or nanofibers) from the matrix. Detailed evidence is provided for the nature of the degradation products: no free nanofillers are detected up to the detection threshold of 100 ppm. Sanding powders measuring 1 to 80 µm in diameter are identified with the original material, still containing the nanofillers. The potential hazard from aerosols generated by sanding nanocomposites up to the nuisance dust limit is also investigated. In-vivo instillation in rats is used to quantify physiological effects on degradation products from abraded nanocomposites, in comparison to the abraded matrix without nanofiller and to the pure nanofiller. In this pioneering and preliminary evaluation, the hazards cannot be distinguished with or without nanofiller.

Genotoxicity investigations on nanomaterials: methods, preparation and characterization of test material, potential artifacts and limitations--many questions, some answers.

Nanomaterials display novel properties to which most toxicologists have not consciously been exposed before the advent of their practical use. The same properties, small size and particular shape, large surface area and surface activity, which make nanomaterials attractive in many applications, may contribute to their toxicological profile. This review describes what is known about genotoxicity investigations on nanomaterials published in the openly available scientific literature to-date. The most frequently used test was the Comet assay: 19 studies, 14 with positive outcome. The second most frequently used test was the micronucleus test: 14 studies, 12 of them with positive outcome. The Ames test, popular with other materials, was less frequently used (6 studies) and was almost always negative, the bacterial cell wall possibly being a barrier for many nanomaterials. Recommendations for improvements emerging from analyzing the reports summarized in this review are: Know what nanomaterial has been tested (and in what form); Consider uptake and distribution of the nanomaterial; Use standardized methods; Recognize that nanomaterials are not all the same; Use in vivo studies to correlate in vitro results; Take nanomaterials specific properties into account; Learn about the mechanism of nanomaterials genotoxic effects. It is concluded that experiences with other, non-nano, substances (molecules and larger particles) taught us that mechanisms of genotoxic effects can be diverse and their elucidation can be demanding, while there often is an immediate need to assess the genotoxic hazard. Thus a practical, pragmatic approach is the use of a battery of standard genotoxicity testing methods covering a wide range of mechanisms. Application of these standard methods to nanomaterials demands adaptations and the interpretation of results from the genotoxicity tests may need additional considerations. This review should help to improve standard genotoxicity testing as well as investigations on the underlying mechanism and the interpretation of genotoxicity data on nanomaterials.

Development of a short-term inhalation test in the rat using nano-titanium dioxide as a model substance.

Evidence suggests that short-term inhalation studies may provide comparable prediction of respiratory tract toxicity to 90-day studies, presenting the opportunity to save time and resources in screening inhalation toxicity of test substances. The aim of this study was to develop a short-term inhalation test that could be employed to provide early evidence on respiratory tract effects which might occur from long-term exposure to aerosols of nano-materials. Male Wistar rats were exposed to aerosols of 0 (control), 2, 10 and 50 mg/m(3) nano-titanium dioxide (TiO2) by inhalation for 6 h/day for 5 days. Necropsies were performed either immediately after the last exposure or after 3 and 16 days post exposure (study days 5, 8 and 21, respectively). Treatment with nano-TiO2 resulted in morphological changes in the lung, with 50 mg/m(3) nano-TiO2 producing an increase in lung weight. Lung inflammation was associated with dose-dependent increases in bronchoalveolar lavage fluid (BALF) total cell and neutrophil counts, total protein content, enzyme activities and levels of a number of cell mediators. No indications of systemic effects could be found by measurement of appropriate clinical pathology parameters. Cell replication (determined by incorporation of 5-bromo-2'-deoxyuridine) was increased at all nano-TiO2 dose levels in large/medium bronchi and terminal bronchioles. The effects on the parameters measured were most prominent either on study day 5 or 8, with some endpoints returning to control levels by day 21. Overall, the pulmonary effects of nano-TiO2 observed in this short-term study were comparable to those previously reported in subchronic inhalation studies.

In vitro genotoxicity studies: n-Butyl acrylate L5178Y mouse lymphoma (TK+/- locus assay), 2-Ethylhexyl acrylate gene mutation assay in Chinese hamster V79 cells, and 2-Ethylhexyl acrylate micronucleus test in human lymphocytes.

Available point mutation tests have shown inconsistent results with various acrylates. Most of those tests were performed prior to OECD guidelines and appropriate data regarding cytotoxicity are not given. Data from three current OECD guideline compliant experiments conducted under GLP are provided. They include (a) an in vitro mouse lymphoma (TK+/-) assay (OECD 490) [3], (b) an in vitro HPRT locus gene mutation assay utilizing cultures of Chinese hamster V79 cells (OECD 476) [1], and (c) an in vitro micronucleus test in human lymphocytes (OECD 487) [2]. Test materials were not mutagenic under these experimental conditions, adding to the weight-of-evidence of non-genotoxicity for this group of chemicals.