RESUMO
In-building disinfectants are commonly applied to control the growth of pathogens in plumbing, particularly in facilities such as hospitals that house vulnerable populations. However, their application has not been well optimized, especially with respect to interactive effects with pipe materials and potential unintended effects, such as enrichment of antibiotic resistance genes (ARGs) across the microbial community. Here, we used triplicate convectively mixed pipe reactors consisting of three pipe materials (PVC, copper, and iron) for replicated simulation of the distal reaches of premise plumbing and evaluated the effects of incrementally increased doses of chlorine, chloramine, chlorine dioxide, and copper-silver disinfectants. We used shotgun metagenomic sequencing to characterize the resulting succession of the corresponding microbiomes over the course of 37 weeks. We found that both disinfectants and pipe material affected ARG and microbial community taxonomic composition both independently and interactively. Water quality and total bacterial numbers were not found to be predictive of pathogenic species markers. One result of particular concern was the tendency of disinfectants, especially monochloramine, to enrich ARGs. Metagenome assembly indicated that many ARGs were enriched specifically among the pathogenic species. Functional gene analysis was indicative of a response of the microbes to oxidative stress, which is known to co/cross-select for antibiotic resistance. These findings emphasize the need for a holistic evaluation of pathogen control strategies for plumbing.
Assuntos
Desinfetantes , Água Potável , Engenharia Sanitária , Desinfetantes/farmacologia , Abastecimento de Água , Antibacterianos/farmacologia , Cobre , Proliferação de CélulasRESUMO
Strain comparison is important to population genetics and to evaluate relapses in patients with Mycobacterium avium complex (MAC) lung disease, but the "gold standard" of pulsed-field gel electrophoresis (PFGE) is time-consuming and complex. We used variable-number tandem repeats (VNTR) for fingerprinting of respiratory isolates of M. intracellulare from patients with underlying bronchiectasis, to establish a nonsequence-based database for population analysis. Different genotypes identified by PFGE underwent species identification using a 16S rRNA gene multiplex PCR. Genotypes of M. intracellulare were confirmed by internal transcribed spacer 1 (ITS1) sequencing and characterized using seven VNTR primers. The pattern of VNTR amplicon sizes and repeat number defined each specific VNTR type. Forty-two VNTR types were identified among 84 genotypes. PFGE revealed most isolates with the same VNTR type to be clonal or exhibit similar grouping of bands. Repetitive sequence-based PCR (rep-PCR) showed minimal pattern diversity between VNTR types compared to PFGE. Fingerprinting of relapse isolates from 31 treated patients using VNTR combined with 16S multiplex PCR unambiguously and reliably distinguished different genotypes from the same patient, with results comparable to those of PFGE. VNTR for strain comparison is easier and faster than PFGE, is as accurate as PFGE, and does not require sequencing. Starting with a collection of 167 M. intracellulare isolates, VNTR distinguished M. intracellulare into 42 clonal groups. Comparison of isolates from different geographic areas, habitats, and clinical settings is now possible.
Assuntos
Genótipo , Repetições Minissatélites , Complexo Mycobacterium avium/classificação , Complexo Mycobacterium avium/genética , Infecção por Mycobacterium avium-intracellulare/diagnóstico , Alelos , Técnicas de Tipagem Bacteriana , Bases de Dados de Ácidos Nucleicos , Humanos , Dados de Sequência Molecular , Tipagem de Sequências Multilocus , RNA Ribossômico 16SRESUMO
Recent studies have shown that respiratory isolates from pulmonary disease patients and household water/biofilm isolates of Mycobacterium avium could be matched by DNA fingerprinting. To determine if this is true for Mycobacterium intracellulare, household water sources for 36 patients with Mycobacterium avium complex (MAC) lung disease were evaluated. MAC household water isolates from three published studies that included 37 additional MAC respiratory disease patients were also evaluated. Species identification was done initially using nonsequencing methods with confirmation by internal transcribed spacer (ITS) and/or partial 16S rRNA gene sequencing. M. intracellulare was identified by nonsequencing methods in 54 respiratory cultures and 41 household water/biofilm samples. By ITS sequencing, 49 (90.7%) respiratory isolates were M. intracellulare and 4 (7.4%) were Mycobacterium chimaera. In contrast, 30 (73%) household water samples were M. chimaera, 8 (20%) were other MAC X species (i.e., isolates positive with a MAC probe but negative with species-specific M. avium and M. intracellulare probes), and 3 (7%) were M. avium; none were M. intracellulare. In comparison, M. avium was recovered from 141 water/biofilm samples. These results indicate that M. intracellulare lung disease in the United States is acquired from environmental sources other than household water. Nonsequencing methods for identification of nontuberculous mycobacteria (including those of the MAC) might fail to distinguish closely related species (such as M. intracellulare and M. chimaera). This is the first report of M. chimaera recovery from household water. The study underscores the importance of taxonomy and distinguishing the many species and subspecies of the MAC.
Assuntos
Complexo Mycobacterium avium/classificação , Complexo Mycobacterium avium/isolamento & purificação , Tuberculose Pulmonar/microbiologia , Microbiologia da Água , Biofilmes , DNA Bacteriano/química , DNA Bacteriano/genética , DNA Ribossômico/química , DNA Ribossômico/genética , DNA Espaçador Ribossômico/química , DNA Espaçador Ribossômico/genética , Características da Família , Humanos , RNA Ribossômico 16S/genética , Análise de Sequência de DNARESUMO
Some very effective antimicrobial coatings exploit copper or cuprous oxide (Cu2O) as the active agent. The aim of this study is to determine which species is the active antimicrobial - dissolved ions, the Cu2O solid, or reactive oxygen species. Copper ions were leached from Cu2O into various solutions and the leachate tested for both dissolved copper and the efficacy in killing Pseudomonas aeruginosa. The concentration of copper species leached from Cu2O into aqueous solution varied greatly with the composition of the aqueous solution. For a range of solution buffers, killing of P. aeruginosa was highly correlated with the concentration of copper in the leachate. Further, 10 µL bacterial suspension droplets were placed on Cu2O coatings, with or without a polymer barrier layer, and tested for bacterial kill. Killing occurred without contact between bacterium and solid, demonstrating that contact with Cu2O is not necessary. We therefore conclude that soluble copper species are the antimicrobial agent, and that the most potent species is Cu+. The solid quickly raises and sustains the concentration of soluble copper species near the bacterium. Killing via soluble copper ions rather than contact should allow copper coatings to kill bacteria even when fouled, which is an important practical consideration.
Assuntos
Anti-Infecciosos , Cobre , Cobre/farmacologia , Antibacterianos/farmacologia , Anti-Infecciosos/farmacologia , Bactérias , Pseudomonas aeruginosa , ÍonsRESUMO
Antimicrobial coatings have a finite lifetime because of wear, depletion of the active ingredient, or surface contamination that produces a barrier between the pathogen and the active ingredient. The limited lifetime means that facile replacement is important. Here, we describe a generic method for rapidly applying and reapplying antimicrobial coatings to common-touch surfaces. The method is to deposit an antimicrobial coating on a generic adhesive film (wrap), and then to attach that modified wrap to the common-touch surface. In this scenario, the adhesion of the wrap and antimicrobial efficacy are separated and can be optimized independently. We demonstrate the fabrication of two antimicrobial wraps, both using cuprous oxide (Cu2O) as the active ingredient. The first uses polyurethane (PU) as the polymeric binder and the second uses polydopamine (PDA). Our antimicrobial PU/Cu2O and PDA/Cu2O wraps, respectively, kill >99.98% and >99.82% of the human pathogen, P. aeruginosa, in only 10 min, and each of them kill >99.99% of the bacterium in 20 min. These antimicrobial wraps can be removed and replaced on the same object in <1 min with no tools. Wraps are already frequently used by consumers to coat drawers or cars for aesthetic or protective purposes.
RESUMO
Antimicrobial coatings can be used to reduce the transmission of infectious agents that are spread by contact. An effective coating should kill microbes in the time between users, which is sometimes minutes or less. Fast killing requires fast transport, and our proposed method of fast transport is a porous coating where the contaminated liquid imbibes (infiltrates) into the pores to achieve rapid contact with active material inside the pores. We test the hypothesis that a porous antimicrobial coating will enable faster inactivation of microorganisms than a planar coating of the same material. We use hydrophilic pores with dimensions of 5-100 µm such that liquid droplets imbibe in seconds, and from there transport distances and times are short, defined by the pore size rather than the droplet size. Our coating has two levels of structure: (A) a porous scaffold and (B) an antimicrobial coating within the pore structure containing the active ingredient. Two scaffolds are studied: stainless steel and poly(methyl methacrylate) (PMMA). The active ingredient is electrolessly deposited copper. To enhance adhesion and growth of copper, a layer of polydopamine (PDA) is deposited on the scaffold prior to deposition of the copper. This porous copper coating kills 99.84% of Pseudomonas aeruginosa within 3 min, which is equivalent to a half-life of 27 s. In contrast, the same layer of PDA/copper on a nonporous coating kills 79.65% in the same time frame, consistent with the hypothesis that the killing rate is increased by the addition of porosity. Using the porous PMMA scaffold, the porous antimicrobial coating kills >99.99% P. aeruginosa in 5 min, which is equivalent to a half-life of 21 s. The higher rate of kill on the porous antimicrobial solid is appropriate for hindering the spread of infectious agents on common-use objects.
Assuntos
Anti-Infecciosos , Polimetil Metacrilato , Porosidade , Cobre/química , Antibacterianos/farmacologia , Antibacterianos/química , Anti-Infecciosos/farmacologiaRESUMO
A framework is needed to account for interactive effects of plumbing materials and disinfectants on opportunistic pathogens (OPs) in building water systems. Here we evaluated free chlorine, monochloramine, chlorine dioxide, and copper-silver ionization (CSI) for controlling Pseudomonas aeruginosa and Acinetobacter baumannii as two representative OPs that colonize hot water plumbing, in tests using polyvinylchloride (PVC), copper-PVC, and iron-PVC convectively-mixed pipe reactors (CMPRs). Pipe materials vulnerable to corrosion (i.e., iron and copper) altered the pH, dissolved oxygen, and disinfectant levels in a manner that influenced growth trends of the two OPs and total bacteria. P. aeruginosa grew well in PVC CMPRs, poorly in iron-PVC CMPRs, and was best controlled by CSI disinfection, whereas A. baumannii showed the opposite trend for pipe material and was better controlled by chlorine and chlorine dioxide. Various scenarios were identified in which pipe material and disinfectant can interact to either hinder or accelerate growth of OPs, illustrating the difficulties of controlling OPs in portions of plumbing systems experiencing warm, stagnant water.
RESUMO
Antimicrobial coatings can inhibit the transmission of infectious diseases when they provide a quick kill that is achieved long after the coating application. Here, we describe the fabrication and testing of a glass coating containing Ag2O microparticles that was prepared from sodium silicate at room temperature. The half-lives of both methicillin-resistant Staphylococcus aureus (MRSA) and Pseudomonas aeruginosa on this coating are only 2-4 min. The half-life of Clostridioides difficile spores is about 9-12 min, which is extremely short for a spore. Additional tests on MRSA demonstrate that the coating retains its antimicrobial activity after abrasion and that an increased loading of Ag2O leads to a shorter half-life. This coating combines the properties of optical transparency, robustness, fast kill, and room temperature preparation that are highly desirable for an antimicrobial coating.
RESUMO
Desiccation-tolerance of cells of four strains of Mycobacterium chimaera and individual strains of Mycobacterium avium, Mycobacterium intracellulare, Mycobacterium abscessus, and Mycobacterium chelonae were measured by two methods. The survival of water-acclimated cells both in filter paper and on the surface of stainless-steel coupons were measured. In filter paper at 40% relative humidity at 25 °C, survival of patient isolates of M. avium and M. chimaera cells was 28% and 34% after 21 days of incubation, whereas it was 100% for the Sorin 3T isolate of M. chimaera. On stainless-steel biofilms after 42 days of incubation at 40% relative humidity at 25 °C, survival of water-acclimated cells of M. intracellulare was above 100%, while M. chelonae cells did not survive beyond 21 days, and survival of water-acclimated cells of M. avium and M. abscessus was 18% and 14%, respectively. On stainless-steel coupons, survival of patient and Sorin 3T isolates of M. chimaera was quite similar, specifically between 14% and 28% survival, after 42 days of incubation at 40% relative humidity at 25 °C. The experiments would support the hypothesis that some nontuberculous mycobacterial species are relatively desiccation-tolerant, whereas others are not. Further, long-term survival of the two M. chimaera strains is consistent with the presence of that species in Sorin 3T heater-coolers shipped throughout the world.
RESUMO
Transparent antimicrobial coatings can maintain the aesthetic appeal of surfaces and the functionality of a touch-screen while adding the benefit of reducing disease transmission. We fabricated an antimicrobial coating of silver oxide particles in a silicate matrix on glass. The matrix was grown by a modified Stöber sol-gel process with vapor-phase water and ammonia. A coating on glass with 2.4 mg of Ag2O per mm2 caused a reduction of 99.3% of SARS-CoV-2 and >99.5% of Pseudomonas aeruginosa, Staphylococcus aureus, and methicillin-resistant Staphylococcus aureus compared to the uncoated glass after 1 h. We envisage that screen protectors with transparent antimicrobial coatings will find particular application to communal touch-screens, such as in supermarkets and other check-out or check-in facilities where a number of individuals utilize the same touch-screen in a short interval.
Assuntos
Anti-Infecciosos/química , Infecções Bacterianas/prevenção & controle , COVID-19/prevenção & controle , Óxidos/química , Compostos de Prata/química , Amônia/química , Anti-Infecciosos/farmacologia , Infecções Bacterianas/microbiologia , COVID-19/virologia , Vidro/química , Humanos , Staphylococcus aureus Resistente à Meticilina/efeitos dos fármacos , Staphylococcus aureus Resistente à Meticilina/patogenicidade , Óxidos/farmacologia , Pseudomonas aeruginosa/efeitos dos fármacos , Pseudomonas aeruginosa/patogenicidade , SARS-CoV-2/efeitos dos fármacos , SARS-CoV-2/patogenicidade , Silicatos/química , Compostos de Prata/farmacologia , Água/químicaRESUMO
Antimicrobial coatings are one method to reduce the spread of microbial diseases. Transparent coatings preserve the visual properties of surfaces and are strictly necessary for applications such as antimicrobial cell phone screens. This work describes transparent coatings that inactivate microbes within minutes. The coatings are based on a polydopamine (PDA) adhesive, which has the useful property that the monomer can be sprayed, and then the monomer polymerizes in a conformal film at room temperature. Two coatings are described (1) a coating where PDA is deposited first and then a thin layer of copper is grown on the PDA by electroless deposition (PDA/Cu) and (2) a coating where a suspension of Cu2O particles in a PDA solution is deposited in a single step (PDA/Cu2O). In the second coating, PDA menisci bind Cu2O particles to the solid surface. Both coatings are transparent and are highly efficient in inactivating microbes. PDA/Cu kills >99.99% of Pseudomonas aeruginosa and 99.18% of methicillin-resistant Staphylococcus aureus (MRSA) in only 10 min and inactivates 99.98% of SARS-CoV-2 virus in 1 h. PDA/Cu2O kills 99.94% of P. aeruginosa and 96.82% of MRSA within 10 min and inactivates 99.88% of SARS-CoV-2 in 1 h.
Assuntos
Antibacterianos/farmacologia , Antivirais/farmacologia , Resistência Microbiana a Medicamentos/efeitos dos fármacos , SARS-CoV-2/efeitos dos fármacos , COVID-19/virologia , Humanos , Staphylococcus aureus Resistente à Meticilina/efeitos dos fármacos , Pseudomonas aeruginosa/efeitos dos fármacos , Propriedades de SuperfícieRESUMO
Mycobacterium avium is capable of an adaptive, reversible response to high-temperature survival depending on its growth temperature. Trehalose concentrations of M. avium cells grown at 42 °C were significantly higher compared to those of cells grown at 25 °C. Further, the survival of cells of M. avium grown at 42 °C and exposed to 65 °C were significantly higher than the survival of cells grown at 25 °C. This adaptive response to growth temperature may play a role in the persistence of M. avium in premise plumbing.
RESUMO
Cetylpyridinium chloride (CPC) is widely used to decontaminate water samples for the cultivation of nontuberculous mycobacteria (NTM). The rationale for using CPC is that it kills more non mycobacteria than NTM and thereby prevents the outgrowth and detection of mycobacterial colonies on solid media. The few CPC-susceptibility measurements that have been published, suggest that CPC-decontamination does kill significant numbers of NTM. We confirm that observation here and further demonstrate that CPC-susceptibility varied significantly by one log between representative NTM species and between strains of the same species. CPC-susceptibility was the same for cells collected from cultures or water-acclimated (P = 0.6485, T-test) and CPC-susceptibility was relatively similar over the range of commonly employed CPC dosages. We conclude that use of CPC as decontaminating agent may lead to failure to recover an NTM isolate and considerable underestimates of NTM numbers.
RESUMO
OBJECTIVE/BACKGROUND: A published survey of bacteria in showerhead biofilm samples revealed that Methylobacterium spp. and Mycobacterium spp. seldom coexisted in biofilms. METHODS: To confirm that information, biofilm samples were collected from household plumbing of Mycobacterium avium patients and Methylobacterium spp. and M. avium numbers were measured by direct colony counts. RESULTS: The results demonstrated that if Methylobacterium spp. were present, Mycobacterium spp. were absent, and the opposite. CONCLUSION: The data demonstrate that microbial populations in biofilms can influence the presence or absence of opportunistic premise plumbing pathogens and, thereby, increase the range of strategies to reduce exposure to waterborne pathogens. Finally, by assessing for the visual presence of methylobacteria as pink pigmentation on showers and shower curtains, homeowners and managers of hospitals and other buildings can quickly determine whether a premise plumbing biofilm sample has mycobacteria with a high degree of assurance.
Assuntos
Methylobacterium/isolamento & purificação , Mycobacterium/isolamento & purificação , Engenharia Sanitária/instrumentação , Biofilmes , Utensílios Domésticos , Humanos , Methylobacterium/crescimento & desenvolvimento , Methylobacterium/fisiologia , Mycobacterium/crescimento & desenvolvimento , Mycobacterium/fisiologia , Microbiologia da ÁguaRESUMO
[This corrects the article DOI: 10.1371/journal.pntd.0005068.].
RESUMO
Lung disease caused by nontuberculous mycobacteria (NTM) is an emerging infectious disease of global significance. Epidemiologic studies have shown the Hawaiian Islands have the highest prevalence of NTM lung infections in the United States. However, potential environmental reservoirs and species diversity have not been characterized. In this cross-sectional study, we describe molecular and phylogenetic comparisons of NTM isolated from 172 household plumbing biofilms and soil samples from 62 non-patient households and 15 respiratory specimens. Although non-uniform geographic sampling and availability of patient information were limitations, Mycobacterium chimaera was found to be the dominant species in both environmental and respiratory specimens. In contrast to previous studies from the continental U.S., no Mycobacterium avium was identified. Mycobacterium intracellulare was found only in respiratory specimens and a soil sample. We conclude that Hawai'i's household water sources contain a unique composition of Mycobacterium avium complex (MAC), increasing our appreciation of NTM organisms of pulmonary importance in tropical environments.