RESUMO
The contents of eight carbonaceous subfractions were determined by simultaneously collecting PM2.5 samples from four sites in different functional areas of Tianjin in 2021. The results showed that the organic carbon (OC) concentration was 3.7 µg·m-3 to 4.4 µg·m-3, and the elemental carbon (EC) concentration was 1.6 µg·m-3 to 1.7 µg·m-3, with the highest OC concentration in the central urban area. There was no significant difference in EC concentration. The concentration of PM2.5 showed the distribution characteristics of the surrounding city>central city>peripheral area. The OC/EC minimum ratio method was used to estimate the concentrations of secondary organic carbon (SOC) in PM2.5, and the results showed that the secondary pollution was more prominent in the surrounding city, with SOC accounting for 48.8%. The correlation between carbon subcomponents in each functional area showed the characteristics of the peripheral area>central area>surrounding area, all showing the strongest correlation between EC1 and OC2 and EC1 and OC4. By including the carbon component concentration into the positive definite matrix factorization (PMF) model for source apportionment, the results showed that road dust sources(9.7%-23.5%), coal-combustion sources (10.2%-13.3%), diesel vehicle exhaust (12.6%-20.2%)and gasoline vehicle exhaust (18.9%-38.8%)were the main sources of carbon components in PM2.5 in Tianjin. The pollution sources of carbon components were different in different functional areas, with the central city and peripheral areas mainly affected by gasoline vehicle exhaust; the surrounding city was more prominently affected by the secondary pollution and diesel vehicle exhaust.
RESUMO
This study aims to identify unique signatures from residential coal combustion in China across various combustion conditions and coal types. Using a Thermal/Spectral Carbon Analyzer with a Photoionization Time-of-Flight Mass Spectrometer (TSCA-PI-TOF-MS), we focus on the optical properties and organic mass spectra of the emissions. Bituminous coal emerged as the primary emitter of total carbon, releasing 729 µg C/mg PM2.5 under smoldering and 894 µg C/mg PM2.5 under flaming. Carbon fractions mainly comprised OC1 and OC2, except for anthracite's dominance of EC1 under smoldering. Pyrolysis carbon absorption shifted from 405, 445 and 532 nm during smoldering to near-infrared bands (635-980 nm) during flaming for both bituminous and anthracite coal. Conversely, clean coal exhibited an inverse trend, attributed to additives enhancing oxygen-containing organic compounds and long-chain hydrocarbons released in charring process. Sample of bituminous coal began charring at OC3 step, while anthracite began earlier at OC2 step, particularly pronounced under flaming. Clean coal displayed unconventional charring at OC1 step under smoldering condition, producing signature compounds like butenal, methylfuran, furanylalcohol, and naphthol. The mass spectra of bituminous coal featured characteristic peaks, including m/z 192 (methylphenanthrene), 206, 220 (alkylated phenanthrenes), and 234 (retene). Anthracite coal showed a potential tracer at m/z 223, shifting from OC1 in smoldering to OC2 in flaming. Clean coal under flaming condition exhibited elevated levels of aromatic compounds, indicating potential toxicity, with peaks at m/z 178 (phenanthrene), 228 (chrysene/benz[a]anthracene), 234 (retene), 242 (methylchrysene), and 252 (benzo[a]pyrene, benzo[k]fluoranthene). Results also showed that the broader mass spectra range in the OC3 and OC4 steps across all coal types suggests that high-temperature pyrolysis promotes diversity. These findings contribute to refined source apportionment of carbon emissions from residential coal combustion and provide the scientific basis for the formulation of air pollution prevention strategies, crucial for coal-dependent regions.
RESUMO
Dual isotopes of nitrogen and oxygen of NO3- are crucial tools for quantifying the formation pathways and precursor NOx sources contributing to atmospheric nitrate. However, further research is needed to reduce the uncertainty associated with NOx proportional contributions. The acquisition of nitrogen isotopic composition from NOx emission sources lacks regulation, and its impact on the accuracy of contribution results remains unexplored. This study identifies key influencing factors of source isotopic composition through statistical methods, based on a detailed summary of δ15N-NOx values from various sources. NOx emission sources are classified considering these factors, and representative means, standard deviations, and 95 % confidence intervals are determined using the bootstrap method. During the sampling period in Tianjin in 2022, the proportional nitrate formation pathways varied between sites. For suburban and coastal sites, the ranking was [Formula: see text] (NO2 + OH radical) > [Formula: see text] (N2O5 + H2O) > [Formula: see text] (NO3 + DMS/HC), while the rural site exhibited similar fractional contributions from all three formation pathways. Fossil fuel NOx sources consistently contributed more than non-fossil NOx sources in each season among three sites. The uncertainties in proportional contributions varied among different sources, with coal combustion and biogenic soil emission showing lower uncertainties, suggesting more stable proportional contributions than other sources. The sensitivity analysis clearly identifies that the isotopic composition of 15N-enriched and 15N-reduced sources significantly influences source contribution results, emphasizing the importance of accurately characterizing the localized and time-efficient nitrogen isotopic composition of NOx emission sources. In conclusion, this research sheds light on the importance of addressing uncertainties in NOx proportional contributions and emphasizes the need for further exploration of nitrogen isotopic composition from NOx emission sources for accurate atmospheric nitrate studies.