RESUMO
Borehole strain gauges play a crucial role in geophysical, seismological, and crustal dynamics studies. While existing borehole strain gauges are proficient in measuring horizontal strains within vertical boreholes, their effectiveness in capturing vertical and oblique strains is limited due to technical constraints arising from the cylindrical probe's characteristics. However, the accurate measurement of three-dimensional strain is essential for a comprehensive understanding of crustal tectonics, dynamics, and geophysics, particularly considering the diverse geological structures and force sources within the crustal medium. In this study, we present a novel approach to address this challenge by enhancing an existing horizontal-component borehole strain gauge with a bellows structure and line strain measurement technology to enable vertical and borehole oblique strain measurements. Integrating these enhancements with horizontal strain measurement capabilities enables comprehensive three-dimensional borehole strain measurements within the same hole section. The system was deployed and tested at the Gongxian seismic station in Sichuan Province. Clear observations of solid tides were recorded across horizontal, oblique, and vertical measurement units, with the tidal morphology and amplitude being consistent with the theoretical calculations. The achieved measurement sensitivity of 10-10 meets the requirements for borehole strain measurement, enabling the characterization of three-dimensional strain states within boreholes through association methods.
RESUMO
Deficiency in human coagulation factor VIII (FVIII) causes hemophilia A (HA). Patients with HA may suffer from spontaneous bleeding, which can be life-threatening. Recombinant FVIII (rFVIII) is an established treatment and prevention agent for bleeding in patients with HA. Human plasma-derived FVIII (pdFVIII), commonly used in clinical practice, is relatively difficult to prepare. In this study, we developed a novel B-domain-deleted rFVIII, produced and formulated without the use of animal or human serum-derived components. rFVIII promoted the generation of activated factor X and downstream thrombin, and, similar to that of other available FVIII preparations, its activity was inhibited by FVIII inhibitors. In addition, rFVIII has ideal binding affinity to human von Willebrand factor. Activated FVIII (FVIIIa) could be degraded by activated protein C and lose its procoagulant activity. In vitro, commercially available recombinant FVIII (Xyntha) and pdFVIII were used as controls, and there were no statistical differences between rFVIII and commercial FVIII preparations, which demonstrates the satisfactory efficacy and potency of rFVIII. In vivo, HA mice showed that infusion of rFVIII rapidly corrected activated partial thromboplastin time, similar to Xyntha. Moreover, different batches of rFVIII were comparable. Overall, our results demonstrate the potential of rFVIII as an effective strategy for the treatment of FVIII deficiency.
Assuntos
Fator VIII , Proteínas Recombinantes , Animais , Humanos , Camundongos , Fator VIII/farmacologia , Fator VIII/uso terapêutico , Hemofilia A/tratamento farmacológico , Hemorragia , Modelos Animais , Proteínas Recombinantes/farmacologia , Proteínas Recombinantes/uso terapêuticoRESUMO
The Pt-Sn bimetallic system is a much studied and commercially used catalyst for propane dehydrogenation. The traditionally prepared catalyst, however, suffers from inhomogeneity and phase separation of the active Pt-Sn phase. Colloidal chemistry offers a route for the synthesis of Pt-Sn bimetallic nanoparticles (NPs) in a systematic, well-defined, tailored fashion over conventional methods. Here, the successful synthesis of well-defined ≈2 nm Pt, PtSn, and Pt3 Sn nanocrystals with distinct crystallographic phases is reported; hexagonal close packing (hcp) PtSn and fcc Pt3 Sn show different activity and stability depending on the hydrogen-rich or poor environment in the feed. Moreover, face centred cubic (fcc) Pt3 Sn/Al2 O3 , which exhibited the highest stability compared to hcp PtSn, shows a unique phase transformation from an fcc phase to an L12 -ordered superlattice. Contrary to PtSn, H2 cofeeding has no effect on the Pt3 Sn deactivation rate. The results reveal structural dependency of the probe reaction, propane dehydrogenation, and provide a fundamental understanding of the structure-performance relationship on emerging bimetallic systems.
RESUMO
Crystallization of colloidal nanocrystals into superlattices represents a practical bottom-up process with which to create ordered metamaterials with emergent functionalities. With precise control over the size, shape and composition of individual nanocrystals, various single- and multi-component nanocrystal superlattices have been produced, the lattice structures and chemical compositions of which can be accurately engineered. Nanocrystal superlattices are typically prepared by carefully controlling the assembly process through solvent evaporation or destabilization or through DNA-guided crystallization. Slow solvent evaporation or cooling of nanocrystal solutions (over hours or days) is the key element for successful crystallization processes. Here we report the rapid growth (seconds) of micrometre-sized, face-centred-cubic, three-dimensional nanocrystal superlattices during colloidal synthesis at high temperatures (more than 230 degrees Celsius). Using in situ small-angle X-ray scattering, we observe continuous growth of individual nanocrystals within the lattices, which results in simultaneous lattice expansion and fine nanocrystal size control due to the superlattice templates. Thermodynamic models demonstrate that balanced attractive and repulsive interparticle interactions dictated by the ligand coverage on nanocrystal surfaces and nanocrystal core size are responsible for the crystallization process. The interparticle interactions can also be controlled to form different superlattice structures, such as hexagonal close-packed lattices. The rational assembly of various nanocrystal systems into novel materials is thus facilitated for both fundamental research and for practical applications in the fields of magnetics, electronics and catalysis.
Assuntos
Cristalização , Nanopartículas/química , Temperatura , Ácidos/química , DNA/química , Ligantes , Magnetismo , Paládio/química , Espalhamento a Baixo Ângulo , Termodinâmica , Difração de Raios XRESUMO
This corrects the article DOI: 10.1038/nature23308.
RESUMO
This paper presents a high-precision component-type vertical pendulum tiltmeter based on an FPGA (Field Programmable Gate Array) that improves the utility and reliability of geophysical field tilt observation instruments. The system is designed for rapid deployment and offers flexible and efficient adaptability. It comprises a pendulum body, a triangular platform, a locking motor and sealing cover, a ratiometric measurement bridge, a high-speed ADC, and an FPGA embedded system. The pendulum body is a plumb-bob-type single-suspension wire vertical pendulum capable of measuring ground tilt in two orthogonal directions simultaneously. It is installed on a triangular platform, sealed as a whole, and equipped with a locking motor to withstand a free-fall impact of 2 m. The system utilizes a differential capacitance ratio bridge in the measurement circuit, replacing analog circuits with high-speed AD sampling and FPGA digital signal processing technology. This approach reduces hardware expenses and interferences from active devices. The system also features online compilation functionality for flexible measurement parameter settings, high reliability, ease of use, and rapid deployment without the need for professional technical personnel. The proposed tiltmeter holds significant importance for further research in geophysics.
RESUMO
In this study, an FPGA(Field Programmable Gate Array)-based borehole strain measurement system was designed that makes extensive use of digital signal processing operations to replace analog circuits. Through the formidable operational capability of FPGA, the sampled data were filtered and denoised to improve the signal-to-noise ratios. Then, with the goal of not reducing observational accuracy, the signal amplification circuit was removed, the excitation voltage was reduced, and the dynamic range of the primary adjustments was expanded to 130 dB. The system's online compilation function made it more flexible to changes in measurement parameters, allowing it to adapt to various needs. In addition, the efficiency of the equipment use was enhanced. The actual observational results showed that this study's FPGA-based borehole strain measurement system had a voltage resolution higher than 1 µV. Clear solid tides were successfully recorded in low-frequency bands, and seismic wave strain was accurately recorded in high-frequency bands. The arrival times and seismic phases of the seismic waves S and P were clearly recorded, which met the requirements for geophysical field deformation observations. Therefore, the system proposed in this study is of major significance for future analyses of geophysical and crust deformation observations.
RESUMO
Machine learning techniques are seeing increased usage for predicting new materials with targeted properties. However, widespread adoption of these techniques is hindered by the relatively greater experimental efforts required to test the predictions. Furthermore, because failed synthesis pathways are rarely communicated, it is difficult to find prior datasets that are sufficient for modeling. This work presents a closed-loop machine learning-based strategy for colloidal synthesis of nanoparticles, assuming no prior knowledge of the synthetic process, in order to show that synthetic discovery can be accelerated despite limited data availability.
RESUMO
Accumulating studies indicates that circular RNAs (circRNAs) play an imperative role in modulating cancer progression and metastasis. In the previous study, elevated circ_0029426 was first observed in glioblastoma (GBM) tissues compared with normal tissues by circRNA microarray. Our aim is to study the function and mechanism of circ_0029426 in GBM. Quantitative reverse transcription polymerase chain reaction was used to detect relative circ_0029426 expression in GBM tissue samples and cells. Fisher's exact test was used to evaluate the expression of circ_0029426 and clinical parameters.The Kaplan-Meier method and Cox regression were analyzed to evaluate the link between circ_0029426 expression and the overall survival of patients with GBM. Loss/gain-of function experiments were performed to measure GBM cell growth, apoptosis, migration, and invasion. Dual luciferase reporter assays were applied to detect the binding ability between circ_0029426 and miR-197. As a result, the circ_0029426 expression is tightly correlated with patients' clinical severity and prognosis. Functionally, circ_0029426 strikingly promoted cell proliferation, migration and invasion, and inhibited cell apoptosis. Mechanistically, miR-197 was predicted and verified to be sponged by circ_0029426. More importantly, the oncogenic functions of circ_0029426 are partially attributed to its suppression on miR-197. Collectively, circ_0029426 may be taken as a potential therapeutic target for GBM.
Assuntos
Biomarcadores Tumorais/genética , Proliferação de Células , Regulação Neoplásica da Expressão Gênica , Glioblastoma/patologia , MicroRNAs/genética , RNA Circular/genética , Apoptose , Movimento Celular , Feminino , Seguimentos , Glioblastoma/genética , Glioblastoma/metabolismo , Humanos , Masculino , Pessoa de Meia-Idade , Invasividade Neoplásica , Prognóstico , Células Tumorais CultivadasRESUMO
Compared to monometallic nanocrystals (NCs), bimetallic ones often exhibit superior properties due to their wide tunability in structure and composition. A detailed understanding of their synthesis at the atomic scale provides crucial knowledge for their rational design. Here, exploring the Pt-Sn bimetallic system as an example, we study in detail the synthesis of PtSn NCs using in situ synchrotron X-ray scattering. We show that when Pt(II) and Sn(IV) precursors are used, in contrast to a typical simultaneous reduction mechanism, the PtSn NCs are formed through an initial reduction of Pt(II) to form Pt NCs, followed by the chemical transformation from Pt to PtSn. The kinetics derived from the in situ measurements shows fast diffusion of Sn into the Pt lattice accompanied by reordering of these atoms into intermetallic PtSn structure within 300 s at the reaction temperature (â¼280 °C). This crucial mechanistic understanding enables the synthesis of well-defined PtSn NCs with controlled structure and composition via a seed-mediated approach. This type of in situ characterization can be extended to other multicomponent nanostructures to advance their rational synthesis for practical applications.
RESUMO
Catalytic CO2 reduction to fuels and chemicals is a major pursuit in reducing greenhouse gas emissions. One approach utilizes the reverse water-gas shift reaction, followed by Fischer-Tropsch synthesis, and iron is a well-known candidate for this process. Some attempts have been made to modify and improve its reactivity, but resulted in limited success. Now, using ruthenium-iron oxide colloidal heterodimers, close contact between the two phases promotes the reduction of iron oxide via a proximal hydrogen spillover effect, leading to the formation of ruthenium-iron core-shell structures active for the reaction at significantly lower temperatures than in bare iron catalysts. Furthermore, by engineering the iron oxide shell thickness, a fourfold increase in hydrocarbon yield is achieved compared to the heterodimers. This work shows how rational design of colloidal heterostructures can result in materials with significantly improved catalytic performance in CO2 conversion processes.
RESUMO
CO2 reduction to higher value products is a promising way to produce fuels and key chemical building blocks while reducing CO2 emissions. The reaction at atmospheric pressure mainly yields CH4 via methanation and CO via the reverse water-gas shift (RWGS) reaction. Describing catalyst features that control the selectivity of these two pathways is important to determine the formation of specific products. At the same time, identification of morphological changes occurring to catalysts under reaction conditions can be crucial to tune their catalytic performance. In this contribution we investigate the dependency of selectivity for CO2 reduction on the size of Ru nanoparticles (NPs) and on support. We find that even at rather low temperatures (210 °C), oxidative pretreatment induces redispersion of Ru NPs supported on CeO2 and leads to a complete switch in the performance of this material from a well-known selective methanation catalyst to an active and selective RWGS catalyst. By utilizing in situ X-ray absorption spectroscopy, we demonstrate that the low-temperature redispersion process occurs via decomposition of the metal oxide phase with size-dependent kinetics, producing stable single-site RuO x/CeO2 species strongly bound to the CeO2 support that are remarkably selective for CO production. These results show that reaction selectivity can be heavily dependent on catalyst structure and that structural changes of the catalyst can occur even at low temperatures and can go unseen in materials with less defined structures.
RESUMO
In the past two decades, the synthetic development of magnetic nanoparticles (NPs) has been intensively explored for both fundamental scientific research and technological applications. Different from the bulk magnet, magnetic NPs exhibit unique magnetism, which enables the tuning of their magnetism by systematic nanoscale engineering. In this review, we first briefly discuss the fundamental features of magnetic NPs. We then summarize the synthesis of various magnetic NPs, including magnetic metal, metallic alloy, metal oxide, and multifunctional NPs. We focus on the organic phase syntheses of magnetic NPs with precise control over their sizes, shapes, compositions, and structures. Finally we discuss the applications of various magnetic NPs in sensitive diagnostics and therapeutics, high-density magnetic data recording and energy storage, as well as in highly efficient catalysis.
RESUMO
We report a new strategy for stabilizing Fe nanoparticles (NPs) in the preparation of SmCo5-Fe nanocomposites. We coat the presynthesized Fe NPs with SiO2 and assemble the Fe/SiO2 NPs with Sm-Co-OH to form a mixture. After reductive annealing at 850 °C in the presence of Ca, we obtain SmCo5-Fe/SiO2 composites. Following aqueous NaOH washing and compaction, we produced exchange-coupled SmCo5-Fe nanocomposites with Fe NPs controlled at 12 nm. Our work demonstrates a successful strategy of stabilizing high moment magnetic NPs in a hard magnetic matrix to produce a nanocomposite with tunable magnetic properties.
RESUMO
Promoters enhance the performance of catalytic active phases by increasing rates, stability, and/or selectivity. The process of identifying promoters is in most cases empirical and relies on testing a broad range of catalysts prepared with the random deposition of active and promoter phases, typically with no fine control over their localization. This issue is particularly relevant in supported bimetallic systems, where two metals are codeposited onto high-surface area materials. We here report the use of colloidal bimetallic nanocrystals to produce catalysts where the active and promoter phases are colocalized to a fine extent. This strategy enables a systematic approach to study the promotional effects of several transition metals on palladium catalysts for methane oxidation. In order to achieve these goals, we demonstrate a single synthetic protocol to obtain uniform palladium-based bimetallic nanocrystals (PdM, M = V, Mn, Fe, Co, Ni, Zn, Sn, and potentially extendable to other metal combinations) with a wide variety of compositions and sizes based on high-temperature thermal decomposition of readily available precursors. Once the nanocrystals are supported onto oxide materials, thermal treatments in air cause segregation of the base metal oxide phase in close proximity to the Pd phase. We demonstrate that some metals (Fe, Co, and Sn) inhibit the sintering of the active Pd metal phase, while others (Ni and Zn) increase its intrinsic activity compared to a monometallic Pd catalyst. This procedure can be generalized to systematically investigate the promotional effects of metal and metal oxide phases for a variety of active metal-promoter combinations and catalytic reactions.
RESUMO
Tin (Sn) is known to be a good catalyst for electrochemical reduction of CO2 to formate in 0.5 M KHCO3. But when a thin layer of SnO2 is coated over Cu nanoparticles, the reduction becomes Sn-thickness dependent: the thicker (1.8 nm) shell shows Sn-like activity to generate formate whereas the thinner (0.8 nm) shell is selective to the formation of CO with the conversion Faradaic efficiency (FE) reaching 93% at -0.7 V (vs reversible hydrogen electrode (RHE)). Theoretical calculations suggest that the 0.8 nm SnO2 shell likely alloys with trace of Cu, causing the SnO2 lattice to be uniaxially compressed and favors the production of CO over formate. The report demonstrates a new strategy to tune NP catalyst selectivity for the electrochemical reduction of CO2 via the tunable core/shell structure.
RESUMO
Fully ordered face-centered tetragonal (fct) FePt nanoparticles (NPs) are synthesized by thermal annealing of the MgO-coated dumbbell-like FePt-Fe3O4 NPs followed by acid washing to remove MgO. These fct-FePt NPs show strong ferromagnetism with room temperature coercivity reaching 33 kOe. They serve as a robust electrocatalyst for the oxygen reduction reaction (ORR) in 0.1 M HClO4 and hydrogen evolution reaction (HER) in 0.5 M H2SO4 with much enhanced activity (the most active fct-structured alloy NP catalyst ever reported) and stability (no obvious Fe loss and NP degradation after 20â¯000 cycles between 0.6 and 1.0 V (vs RHE)). Our work demonstrates a reliable approach to FePt NPs with much improved fct-ordering and catalytic efficiency for ORR and HER.
RESUMO
Monodisperse cobalt (Co) nanoparticles (NPs) were synthesized and stabilized against oxidation via reductive annealing at 600 °C. The stable Co NPs are active for catalyzing the oxygen evolution reaction (OER) in 0.1 M KOH, producing a current density of 10 mA/cm(2) at an overpotential of 0.39 V (1.62 V vs RHE, no iR-correction). Their catalysis is superior to the commercial Ir catalyst in both activity and stability. These Co NPs are also assembled into a monolayer array on the working electrode, allowing the detailed study of their intrinsic OER activity. The Co NPs in the monolayer array show 15 times higher turnover frequency (2.13 s(-1)) and mass activity (1949 A/g) than the NPs deposited on conventional carbon black (0.14 s(-1) and 126 A/g, respectively) at an overpotential of 0.4 V. These stable Co NPs are a promising new class of noble-metal-free catalyst for water splitting.
RESUMO
We report a facile synthesis of monodisperse ferrimagnetic Co(x)Fe(3-x)O4 nanocubes (NCs) through thermal decomposition of Fe(acac)3 and Co(acac)2 (acac = acetylacetonate) in the presence of oleic acid and sodium oleate. The sizes of the NCs are tuned from 10 to 60 nm, and their composition is optimized at x = 0.6 to show strong ferrimagnetism with the 20 nm Co0.6Fe2.4O4 NCs showing a room temperature Hc of 1930 Oe. The ferrimagnetic NCs are self-assembled at the water-air interface into a large-area (in square centimeter) monolayer array with a high packing density and (100) texture. The 20 nm NC array can be recorded at linear densities ranging from 254 to 31 kfci (thousand flux changes per inch). The work demonstrates the great potential of solution-phase synthesis and self-assembly of magnetic array for magnetic recording applications.
RESUMO
As an important and necessary step of sampling biological specimens, the separation of malignant cells from a mixed population of cells usually requires sophisticated instruments and/or expensive reagents. For health care in the developing regions, there is a need for an inexpensive sampling method to capture tumor cells for rapid and accurate diagnosis. Here we show that an underexplored generic difference-overexpression of ectophosphatases-between cancer and normal cells triggers the d-tyrosine phosphate decorated magnetic nanoparticles (Fe3O4-p(d-Tyr)) to adhere selectively on cancer cells upon catalytic dephosphorylation, which enables magnetic separation of cancer cells from mixed population of cells (e.g., cocultured cancer cell (HeLa-GFP) and stromal cells (HS-5)). Moreover, the Fe3O4-p(d-Tyr) nanoparticles also selectively inhibit cancer cells in the coculture. As a general method to broadly target cancer cells without highly specific ligand-receptor interactions (e.g., antibodies), the use of an enzymatic reaction to spatiotemporally modulate the state of various nanostructures in cellular environments will ultimately lead to the development of new theranostic applications of nanomaterials.