Direct Incorporation of Dinitrogen into an Aliphatic C-H Bond.

The activation of dinitrogen (N2) and direct incorporation of its N atom into C-H bonds to create aliphatic C-N compounds remains unresolved. Incompatible conditions between dinitrogen reduction and C-H functionalization make this process extremely challenging. Herein, we report the first example of dinitrogen insertion into an aliphatic Csp3-H bond on the ligand scaffold of a 1,3-propane-bridged [N2N]2--type dititanium complex. Mechanistic investigations on the behaviors of dinuclear and mononuclear Ti complexes indicated the intramolecular synergistic effect of two Ti centers at a C-N bond-forming step. Computational studies revealed the critical isomerization between the inactive side-on N2 complex and the active nitridyl complex, which is responsible for the Csp3-H amination. This strategy maps an efficient route toward the future synthesis of aliphatic amines directly from N2.

Benchmark Study of Density Functional Theory Methods in Geometry Optimization of Transition Metal-Dinitrogen Complexes.

The current benchmark study is focused on determining the most precise theoretical method for optimizing the geometry of transition metal-dinitrogen complexes. To accomplish this goal, seven density functional (DF) methods from five distinct classes of density functional theory (DFT) have been selected, including B3LYP-D3(BJ), BP86-D3(BJ), PBE0-D3(BJ), ωB97X-D, M06, M06-L, and TPSSh-D3(BJ). These DFs will be utilized with the Karlsruhe basis set (def2-SVP). To carry out this benchmark study, a total of forty-two structurally diverse transition metal-dinitrogen compounds with experimentally known X-ray data have been selected from the Cambridge Crystallographic Data Centre (CCDC). Based on a comparison of the theoretical data with experimental values (X-ray) of the selected transition metal-dinitrogen compounds, statistical parameters such as root-mean-square deviation (RMSD) and N-N and M-N bond lengths are obtained to evaluate the performance of the seven chosen DFs. According to the obtained results, among all DFT methods used in the study, Minnesota functionals (M06 and M06-L) and TPSSh-D3(BJ) show good performance, with lower RMSD values. This suggests that these three methods are the most reliable for optimizing the geometry of transition metal-dinitrogen complexes. Based on the absolute errors of the N-N and M-N bond lengths relative to the X-ray data, further analysis is conducted, and it is determined that M06-L is the best functional for optimizing the geometry of transition metal-dinitrogen compounds. Additionally, the influence of using a high-level basis set (def2-TZVP) compared to def2-SVP on the calculated RMSD among the seven chosen methods is found to be negligible.

(n-Bu)4NBr-Promoted N2 Splitting to Molybdenum Nitride.

Splitting of N2 via six-electron reduction and further functionalization to value-added products is one of the most important and challenging chemical transformations in N2 fixation. However, most N2 splitting approaches rely on strong chemical or electrochemical reduction to generate highly reactive metal species to bind and activate N2, which is often incompatible with functionalizing agents. Catalytic and sustainable N2 splitting to produce metal nitrides under mild conditions may create efficient and straightforward methods for N-containing organic compounds. Herein, we present that a readily available and nonredox (n-Bu)4NBr can promote N2-splitting with a Mo(III) platform. Both experimental and theoretical mechanistic studies suggest that simple X- (X = Br, Cl, etc.) anions could induce the disproportionation of MoIII[N(TMS)Ar]3 at the early stage of the catalysis to generate a catalytically active {MoII[N(TMS)Ar]3}- species. The quintet MoII species prove to be more favorable for N2 fixation kinetically and thermodynamically, compared with the quartet MoIII counterpart. Especially, computational studies reveal a distinct heterovalent {MoII-N2-MoIII} dimeric intermediate for the N≡N triple bond cleavage.

[Comparison of outcomes of mixed unicompartmental knee arthroplasty and total knee arthroplasty in the treatment of medial osteoarthritis of the knee].

OBJECTIVE: To evaluate outcomes of mixed unicompartmental knee arthroplasty(UKA) and total knee arthroplasty(TKA) in the treatment of medial osteoarthritis(OA) of the knee. METHODS: Retrospective analysis of 156 patients, 44 males and 112 females, aged from 50 to 75 years old with an average of(58.76±4.97) years old, who underwent knee arthroplasty from October 2017 to October 2019. The patients were divided into two groups:81 cases(81 knees) underwent TKA, including 23 males and 58 females, aged from 51 to 75 years old with an average of (58.60±5.01) years old, and 75 case (75 knees) underwent UKA with mixed phase 3 Oxford, including 21 males and 54 females, aged from 50 to 72 years old with an average of (58.92±4.95) years old. The two groups were compared regarding to the clinical outcomes, assessed using surgical information and complications, American Knee Society score(AKSS) clinical score and functional score. Radiographs were assessed using hip-knee-ankle angle(HKA), tibial component valgus/varus angle(TCVA), tibial component posterior slope angle(TCPSA), femoral component valgus/varus angle(FCVA), femoral component posterior slope angle(FCPSA), looking for bearing dislocation, prosthesis loosening, progression of OA in lateral compartment. RESULTS: Intraoperative bleeding, operative time and hospital days were significantly better in the UKA group than in the TKA group (P<0.05), and there were no postoperative complications in either group. Patients in both groups were enrolled with an average follow-up time of (38.01±8.90) months, ranged from 24 to 54 months. AKSS functional, AKSS clinical, HKA in both groups significantly improved at the final follow-up compared with those before operation. At the final follow-up, the UKA group was significantly better than the TKA group in AKSS functional and AKSS clinical, whereas HKA in the TKA group was better. At the final follow-up. TCVA and FCVA between the two groups were not significantly different, while TCPSA and FCPSA in the UKA group were significantly greater than the TKA group. No signs of progression of OA to the lateral compartment were observed. CONCLUSION: Mixed phase 3 Oxford UKA in medial unicompartmental knee osteoarthritis was considerably better than TKA for less blood loss, shorter operation time, shorter hospital stay, rapid postoperative recovery, helping achieve satisfactory function, provided satisfactory outcome.

Prevalence of osteoporosis in patients awaiting unicompartmental knee arthroplasty: a cross-sectional study.

Objectives: Osteoporosis may contribute to failure of unicompartmental knee arthroplasty (UKA), yet the prevalence of osteoporosis in the population awaiting UKA has not been adequately studied. The objectives of this study were to report the prevalence of osteoporosis in people awaiting UKA and the rate of anti-osteoporosis treatment, and to explore factors associated with osteoporosis prevalence in people awaiting UKA. Methods: Participants awaiting UKA from January 2019 to May 2023 were consecutively enrolled. Participants ' age, gender, BMI, knee K-L score, VAS score, history of previous DXA testing, history of anti-osteoporosis treatment, and possible underlying risk factors were recorded. All participants were given a dual-energy x-ray absorptiometry (DXA) test after the visit. The diagnosis of osteoporosis was made according to the World Health Organization criteria. Compare the prevalence of osteoporosis between people waiting for UKA and the general population. Risk factors associated with osteoporosis were analyzed using multiple linear regression and binary logistic regression models. Results: A total of 340 participants were included in the study, 259 in female and 81 in male, with a mean age of 63.53 years (range: 41-84 years), and all participants completed UKA and had DXA prior to UKA. The prevalence of osteoporosis was 40.88% (44.79% in female and 28.40% in male). The prevalence of osteoporosis was higher in female than in male (p<0.001). The prevalence of osteoporosis in the population waiting for UKA was significantly higher than that in the general population (p < 0.001). DXA testing was performed in 12.06% within 1 year prior to the visit. The percentage of those who had received anti-osteoporosis treatment was 20.59% (20.86% in osteoporosis, 22.39% in Osteopenia and 16.42% in normal bone mass). The correlation between age, gender, body mass index, visual analogue scale score and osteoporosis was statistically significant. Conclusion: Osteoporosis is common in people waiting for UKA, but screening and treatment rates are low. Female patients of advanced age and low weight combined with significant pain should be considered for osteoporosis screening and appropriate treatment before UKA.

Multicomponent double Mannich alkylamination involving C(sp2)-H and benzylic C(sp3)-H bonds.

Alkylamines are ubiquitous in pharmaceuticals, materials and agrochemicals. The Mannich reaction is a well-known three-component reaction for preparing alkylamines and has been widely used in academic research and industry. However, the nucleophilic components in this process rely on C(sp2)-H and activated C(sp3)-H bonds while the unactivated C(sp3)-H bonds involved Mannich alkylamination is a long-standing challenge. Here, we report an unprecedented multicomponent double Mannich alkylamination for both C(sp2)-H and unactivated benzylic C(sp3)-H bonds. In this process, various 3-alkylbenzofurans, formaldehyde and alkylamine hydrochlorides assemble efficiently to furnish benzofuran-fused piperidines. Mechanistic studies and density functional theory (DFT) calculations revealed a distinctive pathway that a multiple Mannich reaction and retro-Mannich reaction of benzofuran and dehydrogenation of benzylic C(sp3)-H bonds were key steps to constitute the alkylamination. This protocol furnishes a Mannich alkylamine synthesis from unusual C-H inputs to access benzofuran-fused piperidines with exceptional structural diversity, molecular complexity and drug-likeness. Therefore, this work opens a distinctive vision for the alkylamination of unactivated C(sp3)-H bonds, and provides a powerful tool in diversity-oriented synthesis (DOS) and drug discovery.