Theoretical investigation on regulating photophysical properties and proton transfer behavior by electronegativity for near-infrared emitting styryl dyes.

Our main focus is to explore the atomic electronegativity-dependent photoinduced behavior of styryl derivatives (HBO, HBS, and HBSe). The results of structural parameter calculation by the DFT method show that the intramolecular hydrogen bonds of normal and tautomer form are strengthened and weakened, respectively, in an excited state (S1), which is conducive to the excited intramolecular proton transfer (ESIPT) process. The enhancement of excited hydrogen bond is beneficial to the ESIPT process from the aspects of infrared vibration frequency (IR), Mulliken's charge analysis, and density gradient reduction (RDG). Additionally, by determining the bond energy with the band critical point (BCP) parameter, we found that the lower the electronegativity of the atom, the larger the hydrogen bond strength at the excited state and the more likely ESIPT reaction occurs. Meanwhile, the intramolecular H-bonds O-H…N in HBO, HBS, and HBSe are enhanced with the weakened electron-withdrawing capacity of the atom (from O to S and Se). Subsequently, frontier molecular orbital (FMOs) and charge density difference (CDD) analyses essentially revealed that electron redistribution induces the ESIPT process. Low atomic electronegativity exhibits the high chemical activity of the excited state. Furthermore, to demonstrate the electronegativity-dependent ESIPT behavior of the system, we built potential energy curves (PECs) and located the transition states (TS) of proton transfer processes.

Effect of Nitrogen Cation as "Electron Trap" at π-Linker on Properties for p-Type Photosensitizers: DFT Study.

On the basis of thieno(3,2-b)thiophene and dithieno[3,2-b:2',3'-d]thiophene (T2 and T3 moieties) as π-linker, the A, D and S series dyes were designed to investigate the effect of the introducing N+ as an "electron trap" into T2 and T3 on the properties of the dyes. The optimized structures, electronic and optical properties were investigated by the density functional theory (DFT) and time-dependent DFT (TD-DFT). The results show that the properties of the dyes are sensitive to the N+ position in π-linkers. D series dyes with electron-withdrawing units located near the donor have better properties than the corresponding A series with the electron-withdrawing units located near the acceptor. For A and D series, the N+ modified dye named T2N+1-d displays the largest red shift of the UV-vis absorption, the maximum integral values of the adsorption-wavelength curves over the visible light, the highest light harvesting efficiency (LHE, 0.996), and the strongest adsorption energy (-44.33 kcal/mol). T2N+1-d also has a large driving force of hole injection (ΔGinj, -0.74 eV), which results in a more efficient hole injection. Bearing a lengthier π-linker than T2N+1-d, the properties of T2N+1-s are further improved. T2N+1-d moiety or its increased conjugated derivatives may be a promising π-linker.

Theoretical study on optimizing dipeptidomimetic isocyanonaphthalene chemosensor and the fluorescence mechanism for detecting Hg2.

The excited (S1) state charge distribution characteristics and fluorescence mechanism of fluorescence probes benzyl (6-cyano-2-naphthoyl)-L-valinate (NPI) and benzyl (6-amino-2-naphthoyl)-L-valinate (NPA) have been discussed using density functional theory (DFT) and time-dependent density functional theory (TD-DFT). Further analysis by constructing a torsional potential energy curve (PEC) shows that a well-defined minimum energy conformation is observed when the C-C single bond between the valine benzyl ester and naphthalene ring in NPI rotates. For NPA, the most stable conformation is the naphthalene ring conformation with dihedral angle N2C1C2C3 of -30.60°, whose total energy is 0.17 kcal/mol lower than that of the second most stable conformer. The frontier molecular orbitals (FMOs) demonstrate that NPI exhibits a low degree of charge coupling, and the oscillator intensity is close to zero, indicating that it is not conducive to luminescence. However, in the S1 state, the oscillator strength of NPA is 1.2044, which is a bright state, resulting in the strong emitting. Additionally, fluorescence imaging is favored as a visual observation technique, and Stokes shift is an important physical parameter to measure fluorescence. According to the idea that changing the number and position of functional groups can affect the photophysical properties of fluorescent dyes, o-NPDI, p-NPDI and m-NPDI dyes were newly designed and o-NPDA, p-NPDA, m-NPDA produced after recognition of Hg2+. The spectral performance results show that the newly designed fluorescent dye (p-NPDA) can not only emit in the near infrared region after recognizing Hg2+, but also has a large Stokes shift (236 nm). This indirectly reflects that para-substitution is more conducive to Stokes shift, and has become one of the strategies for fluorescent dye design.

Theoretical Study of Effects of Anchoring Groups on Photovoltaic Properties of a Triarylamine-Based p-Type Sensitizer.

The effects of anchoring groups on triarylamine-based p-type dyes were studied by substituting the strong electron-withdrawing carboxyl group with the weak electron-withdrawing pyridyl and the electron-rich catechol groups. Judged by the index t, the charge separation would be improved greatly when the carboxyl group of P4 is replaced by the pyridyl or catechol groups. Although carboxyl as an anchoring group lowers the HOMO energy and facilitates the hole injection in comparison with pyridyl and catechol groups, the weak electron-withdrawing pyridyl and the electron-rich catechol groups facilitate the charge separation. E g becomes narrow as the electron-withdrawing abilities of the anchoring groups decrease or as the conjugation extends. Both the extended π-spacers and the substitution of carboxyl with pyridyl and catechol groups promote the redshifts of adsorption wavelengths. The oscillator strengths for all dyes are over 2.00, indicating that all the dyes are able to harvest the sunlight strongly. The ΔG CR values of P4, DF4, and DZ4 are smaller than those of the other dyes. Also, these dyes have larger adsorption over infrared visible light, indicating that these dyes may be good candidates for p-type DSSCs.

Design of high performance p-type sensitizers with pyridinium derivatives as the acceptor by theoretical calculations.

Based on triphenylamine as an electron donor and thiophene as a π-linker, Series P and A p-type sensitizers were designed to investigate the effects of the different acceptors on the properties of the sensitizers. The optimized molecular structures, electronic and optical properties were investigated by density functional theory (DFT) and time-dependent DFT (TD-DFT). The results showed that the properties of the dyes can be tuned by the introduction of the different electron-withdrawing groups to the N atom in the pyridinium acceptor. Compared with the synthesized Series P dyes used in p-type sensitizers, the properties of Series A dyes, except for two dyes that cannot be used as p-type sensitizers, are improved by means of modifying pyridinium acceptors. Due to the suitable electron-withdrawing ability of the hexafluorodiacetylamino group in its acceptor, A6 has the narrowest energy gap (1.90 eV), the largest driving force of hole injection (ΔG inj, -0.68 eV), the high light harvesting efficiency (LHE, 0.9984) and the smallest internal reorganization energy (λ int, 5.05 kcal mol-1). Hence, A6 not only enhances electronic excitation, but also improves the reorganization energy. Importantly, A6 shows the largest red shift and the maximum integral values of the adsorption over the visible light, as well as the strongest adsorption energy (-74.80 kcal mol-1) on a NiO surface. Thus, A6 may be a promising sensitizer for the p-type dye-sensitized solar cells (DSSCs), and the acceptor of A6 may provide a new and easily accessible high performance acceptor for p-type sensitizers.

Strain energies of cubane derivatives with different substituent groups.

Homodesmotic reaction and isodesmotic reaction were designed for the computation of strain energies (SE) for a series of cubane derivatives. Total energies of the optimized geometric structures at the DFT-B3LYP/6-31G* level were used to derive the SE. The SE value of cubane is 169.13 kcal/mol for homodesmotic reaction, which is in good agreement with the experimental value. The variation of SE with respect to the number of substituents is similar for the homodesmotic reaction and isodesmotic reaction. The SE values of polynitrocubane and polydifluoroaminocubane increase slightly as up to four substituent groups being added to the cage skeleton. On contrary, the SE dramatically increases when the number of substituent groups m increases from 5 up to 8. For polynitratocubane, the SE decreases slightly at the beginning then increases as the number of group increases. For polyazidocubane, there are very small group effects on the SE. Among four types of substituent groups, the nitro group has greatest effect on the strain energy of caged cubane skeleton. The calculated SE value of octanitrocubane is 257.20 kcal/mol, while that of octaazidocubane is 166.48 kcal/mol via isodesmotic reaction. The azido group releases the strain energy of cubane skeleton when the number of azido groups is less than 7. The interactions among the substituted groups deviated from group additivity. The substituted groups withdraw electrons from the cubane, reducing the repulsion between C-C bonds and resulting the release the strain of the skeleton for isomers with fewer substituents. Group repulsions increase sharply with more and more nitro, nitrato and difluoroamino groups being attached to cubane, resulting large strains of the skeleton. The average negative charges of the substituted groups influence the strain energy of cubane derivatives.

Theoretical study on the structural, vibrational, and thermodynamic properties of the (Br2GaN3)n (n = 1-4) clusters.

The molecular geometries, vibrational properties, and thermodynamic properties of the clusters (Br(2)GaN(3))( n )(n = 1-4) were studied at the B3LYP/6-311+G* level. The optimized clusters (Br(2)GaN(3))( n )(n = 2-4) were all found to possess a cyclic structure consisting of Ga atoms bridged by the α-nitrogen of the azide groups. A discussion of the relationships between the geometrical parameters and the degree of oligomerization n is provided. Features in the IR spectra were assigned by vibrational analysis. Trends in thermodynamic properties with temperature and degree of oligomerization n are discussed. Thermodynamic analysis of the gas-phase reaction showed that the formation of the clusters (Br(2)GaN(3))( n )(n = 2-4) is thermodynamically favorable considering the enthalpies at 298.2 K. The calculated results for the Gibbs free energies were negative, which indicates that the oligomerizations can occur spontaneously at 298.2 K.