Gene and Photothermal Combination Therapy: Principle, Materials, and Amplified Anticancer Intervention.

Gene therapy (GT) and photothermal therapy (PTT) have emerged as promising alternatives to chemotherapy and radiotherapy for cancer treatment, offering noninvasiveness and reduced side effects. However, their efficacy as standalone treatments is limited. GT exhibits slow response rates, while PTT is confined to local tumor ablation. The convergence of GT and PTT, known as GT-PTT, facilitated by photothermal gene nanocarriers, has attracted considerable attention across various disciplines. In this integrated approach, GT reciprocates PTT by sensitizing cellular response to heat, while PTT benefits GT by improving gene translocation, unpacking, and expression. Consequently, this integration presents a unique opportunity for cancer therapy with rapid response and improved effectiveness. Extensive efforts over the past few years have been dedicated to the development of GT-PTT, resulting in notable achievements and rapid progress from the laboratory to potential clinical applications. This comprehensive review outlines recent advances in GT-PTT, including synergistic mechanisms, material systems, imaging-guided therapy, and anticancer applications. It also explores the challenges and future prospects in this nascent field. By presenting innovative ideas and insights into the implementation of GT-PTT for enhanced cancer therapy, this review aims to inspire further progress in this promising area of research.

Tunable Emission of Low-Dimensional Organic Metal Halides by Stoichiometric Ratio and Metal Center.

Low-dimensional (LD) organic metal halides (OMHs) have a bright future due to their excellent photoelectric characteristics and unique structure. However, the synthesis and emission control of LD-OMHs are still unclear. Herein, the different dimensional (zero-dimensional (0D), one-dimensional (1D), and three-dimensional (3D)) of OMHs were obtained by the reaction of 1,4-diazabicyclo (2.2.2) octane with PbBr2 in different stoichiometric ratios. This discovery shows that the structure and properties of OMHs can be regulated while maintaining the functional organic cations of OMHs, which broadens the path for the development of functional LD-OMHs. Among them, 0D-OMH 1 and 1D-OMH 3 have narrow-band (full width at half-maximum (fwhm) = 74 nm) and broad-band (fwhm = 201 nm) emission, respectively. We found that when organic cations have no contribution to the formation of conduction band minimum and valence band maximum, and the distances between polyhedrons are larger than the van der Waals diameter of the halogen atom, the effect of phonons on exciton transitions can be reduced to achieve a narrow-band emission. Further, Cu(I)- and Mn (II)-based 0D-OMHs were synthesized, which have high photoluminescence quantum yield (PLQY) (33.97 and 47.33%, respectively). When the emitting of 0D-OMHs produced by the interaction of the metal-center and halogens, the asymmetric planar metal-halogen structure will result in a higher PLQY.

N6-methyladenosine modification of OIP5-AS1 promotes glycolysis, tumorigenesis, and metastasis of gastric cancer by inhibiting Trim21-mediated hnRNPA1 ubiquitination and degradation.

BACKGROUND: Opa-interacting protein 5 antisense transcript 1 (OIP5-AS1) has been demonstrated to play vital roles in development and progression of tumors such as gastric cancer (GC). However, the detailed molecular mechanism of OIP5-AS1 has not been completely elucidated. Our study aimed to investigate the role and the epigenetic regulation mechanism of OIP5-AS1 in GC. METHODS: OIP5-AS1 expression in GC tissues was detected by RT-qPCR. Loss- and gain-of-function experiments were conducted to assess the biological function of OIP5-AS1 in vitro and in vivo. The interaction of OIP5-AS1 with insulin-like growth factor 2 mRNA-binding protein 3 (IGF2BP3) or heterogeneous nuclear nucleoprotein A1 (hnRNPA1) was verified by bioinformatics analysis, RNA pull-down assays, and RNA immunoprecipitation assays. RESULTS: In this study, we identified that OIP5-AS1 is specifically overexpressed in GC tumor tissues and cell lines and correlated with a poor prognosis. The loss of OIP5-AS1 suppressed the proliferation, migration, invasion, epithelial-mesenchymal transition (EMT), and glycolysis of GC cells, but the ectopic expression of OIP5-AS1 had the opposite impact. Meanwhile, knockdown of OIP5-AS1 inhibited tumor growth in patient-derived xenograft models, as well as repressed tumor metastasis. Mechanistically, IGF2BP3 could bind to OIP5-AS1 by N6-methyladenosine (m6A) modification sites on OIP5-AS1, thereby stabilizing OIP5-AS1. Moreover, OIP5-AS1 prevented Trim21-mediated ubiquitination and degradation of hnRNPA1, stabilizing hnRNPA1 protein and promoting the malignant progression of GC by regulating PKM2 signaling pathway. CONCLUSIONS: In conclusion, this study highlighted that OIP5-AS1 is an oncogenic m6A-modified long non-coding RNA (lncRNA) in GC and that IGF2BP3/OIP5-AS1/hnRNPA1 axis may provide a potential diagnostic or prognostic target for GC.

Ghrelin may protect against vascular endothelial injury in Acute traumatic coagulopathy by mediating the RhoA/ROCK/MLC2 pathway.

Ghrelin exerts widespread effects in several diseases, but its role and mechanism in Acute Traumatic Coagulopathy (ATC) are largely unknown. The effect of ghrelin on cell proliferation was examined using three assays: 3-(4,5-dimethyl-2-thiazolyl)-2,5-diphenyl-2-H-tetrazolium bromide (MTT), Lactate Dehydrogenase (LDH), and flow cytometry. The barrier function of the endothelial cells was evaluated using the Trans-Endothelial Electrical Resistance (TEER) and the endothelial permeability assay. An ATC mouse model was established to evaluate the in vivo effects of ghrelin. The Ras homolog family member A (RhoA) overexpression plasmid or adenovirus was used to examine the molecular mechanism of ghrelin. Ghrelin enhanced Human Umbilical Vein Endothelial Cells (HUVEC) proliferation and endothelial cell barrier function and inhibited HUVEC permeability damage in vitro. Additionally, ghrelin decreased the activated Partial Thromboplastin Time (aPTT) and Prothrombin Time (PT) in mice blood samples in the ATC mouse model. Ghrelin also improved the pathological alterations in postcava. Mechanistically, ghrelin acts through the RhoA/ Rho-associated Coiled-coil Containing Kinases (ROCK)/ Myosin Light Chain 2 (MLC2) pathway. Furthermore, the protective effects of ghrelin, both in vitro and in vivo, were reversed by RhoA overexpression. Our findings demonstrate that ghrelin may reduce vascular endothelial cell damage and endothelial barrier dysfunction by blocking the RhoA pathway, suggesting that ghrelin may serve as a potential therapeutic target for ATC treatment.

Photoluminescence Enhancement in Silica-Confined Ligand-Free Perovskite Nanocrystals by Suppression of Silanol-Induced Traps and Phase Impurities.

The detriments of intrinsic silanol groups in mesoporous silica to the photoluminescence (PL) of lead halide perovskite nanocrystals (LHP NCs) confined in the template have never been determined and clearly elucidated. Here, we disclose that silanol-induced Cs+ and Br- deficiencies prompt the generation of traps and CsPb2Br5 impurities. The temperature-dependent PL spectra verify the higher energetic barrier of trap states in CsPbBr3 NCs confined in silanol-rich mesoporous silica. Femtosecond transient absorption spectra reveal the trapped state mediates a broadband photoinduced absorption and long-lived decay pathway of CsPbBr3 NCs in silanol-rich templates. A remarkable improvement (up to 160-fold) in PL quantum yields is realized by simple silanol elimination. This work demonstrates the detrimental effects of silanol sites on the PL properties of LHP NCs impregnated in mesoporous silica and provides a new perspective for the ligand-free synthesis of high-quality LHP NCs in mesoporous templates by facile impregnation for practical applications.

Ligand Engineering Enables Efficient Pure Red Tin-Based Perovskite Light-Emitting Diodes.

With increasing ecological and environmental concerns, tin (Sn)-based perovskite light-emitting diodes (PeLEDs) are competitive candidates for future displays because of their environmental friendliness, excellent photoelectric properties, and low-cost solution-processed fabrication. Nonetheless, their electroluminescence (EL) performance still lags behind that of lead (Pb)-based PeLEDs due to the fast crystallization rate of Sn-based perovskite films and undesired oxidation from Sn2+ to Sn4+ , leading to poor film morphology and coverage, as well as high density defects. Here, we propose a ligand engineering strategy to construct high-quality phenethylammonium tin iodide (PEA2 SnI4 ) perovskite films by using L-glutathione reduced (GSH) as surface ligands toward efficient pure red PEA2 SnI4 -based PeLEDs. We show that the hydrogen-bond and coordinate interactions between GSH and PEA2 SnI4 effectively reduce the crystallization rate of the perovskites and suppress the oxidation of Sn2+ and formation of defects. The improved pure red perovskite films not only show excellent uniformity, density, and coverage but also exhibit enhanced optical properties and stability. Finally, state-of-the-art pure red PeLEDs achieve a record external quantum efficiency of 9.32 % in the field of PEA2 SnI4 -based devices. This work demonstrates that ligand engineering represents a feasible route to enhance the EL performance of Sn-based PeLEDs.

Long non-coding RNA FEZF1-AS1 promotes rectal cancer progression by competitively binding miR-632 with FAM83A.

The long non-coding RNA (lncRNA) forebrain embryonic zinc finger protein 1 antisense RNA1 (FEZF1-AS1) was recently identified as an oncogenic gene in several types of tumors. The biological function of FEZF1-AS1 in rectal cancer progression, however, remains unknown. In the present study, we discover that FEZF1-AS1 is significantly upregulated in rectal cancer tissues and cells. Knocking down of FEZF1-AS1 suppresses cell proliferation, migration, and invasion , and tumorigenesis . Furthermore, FEZF1-AS1 functions as a competing endogenous RNA (ceRNA) for miR-632, resulting in the suppression of family with sequence similarity 83, member A (FAM83A). Overall, our findings reveal that FEZF1-AS1/miR-632/FAM83A axis plays an oncogenic role in rectal cancer progression, suggesting that it may be a novel therapeutic target for rectal cancer.

Organic Sulfonium-Stabilized High-Efficiency Cesium or Methylammonium Lead Bromide Perovskite Nanocrystals.

Herein, we report a new X-type ligand, i.e., organic sulfonium bromide, for high-efficiency CsPbBr3 and MAPbBr3 (MA=methylammonium) perovskite nanocrystals (PNCs). We first confirmed the facile synthesis of the titled ligands in N,N-dimethylformamide at room temperature. By reacting dodecylmethylsulfide with allyl bromide, (3-bromopropyl)trimethoxysilane, and 1,4-dibromobutane, respectively, three representative ligands (named DAM, DSM, and DMM) are acquired. All of them result in CsPbBr3 and MAPbBr3 PNCs with near-unity photoluminescence quantum yield (PLQY) and decent ambient stability (no less than 90 % PLQY after 2 months) using a room-temperature ligand-assisted reprecipitation technique. Among them, DSM and DMM endow CsPbBr3 PNCs with higher thermal/light stability arising from the cross-linkable or bidentate ligand structure. Further, DSM-CsPbBr3 PNCs can be incorporated into polystyrene through in situ thermal polymerization and the composite shows a record-high PLQY of 93.8 %.

Ultrasensitive Temperature Sensing Based on Ligand-Free Alloyed CsPbClx Br3-x Perovskite Nanocrystals Confined in Hollow Mesoporous Silica with High Density of Halide Vacancies.

Temperature sensing based on fluorescent semiconductor nanocrystals has recently received immense attention. Enhancing the trap-facilitated thermal quenching of the fluorescence should be an effective approach to achieve high sensitivity for temperature sensing. Compared with conventional semiconductor nanocrystals, the defect-tolerant feature of lead halide perovskite nanocrystals (LHP NCs) endows them with high density of defects. Here, hollow mesoporous silica (h-SiO2 ) template-assisted ligand-free synthesis and halogen manipulation (chloride-importing) are proposed to fabricate highly defective yet fluorescent CsPbCl1.2 Br1.8 NCs confined in h-SiO2 (CsPbCl1.2 Br1.8 NCs@h-SiO2 ) for ultrasensitive temperature sensing. The trap barrier heights, exciton-phonon scattering, and trap state filling process in the CsPbCl1.2 Br1.8 NCs@h-SiO2 and CsPbBr3 NCs@h-SiO2 are studied to illustrate the higher temperature sensitivity of CsPbCl1.2 Br1.8 NCs@h-SiO2 at physiological temperature range. By integrating the thermal-sensitive CsPbCl1.2 Br1.8 NCs@h-SiO2 and thermal-insensitive K2 SiF6 :Mn4+ phosphor into the flexible ethylene-vinyl acetate polymer matrix, ratiometric temperature sensing from 30.0 °C to 45.0 °C is demonstrated with a relative temperature sensitivity up to 13.44% °C-1 at 37.0 °C. The composite film shows high potential as a thermometer for monitoring the body temperature. This work demonstrates the unparalleled temperature sensing performance of LHP NCs and provides new inspiration on switching the defects into advantages in sensing applications.

Down-Conversion Nitride Materials for Solid State Lighting: Recent Advances and Perspectives.

Advances in solid state white lighting technologies witness the explosive development of phosphor materials (down-conversion luminescent materials). A large amount of evidence has demonstrated the revolutionary role of the emerging nitride phosphors in producing superior white light-emitting diodes for lighting and display applications. The structural and compositional versatility together with the unique local coordination environments enable nitride materials to have compelling luminescent properties such as abundant emission colors, controllable photoluminescence spectra, high conversion efficiency, and small thermal quenching/degradation. Here, we summarize the state-of-art progress on this novel family of luminescent materials and discuss the topics of materials discovery, crystal chemistry, structure-related luminescence, temperature-dependent luminescence, and spectral tailoring. We also overview different types of nitride phosphors and their applications in solid state lighting, including general illumination, backlighting, and laser-driven lighting. Finally, the challenges and outlooks in this type of promising down-conversion materials are highlighted.

LncRNA OIP5-AS1 facilitates gastric cancer cell growth by targeting the miR-422a/ANO1 axis.

OPA-interacting protein 5 antisense transcript 1 (OIP5-AS1) plays an important regulatory role in various types of cancers. However, the functional role and regulatory mechanisms of OIP5-AS1 in gastric cancer (GC) remain largely unknown. In this study, we found that the expression of OIP5-AS1 was increased in GC tissues compared with that in adjacent non-cancerous tissues, which was significantly associated with shorter overall survival time of patients. In addition, OIP5-AS1 expression was also increased in GC cell lines including NCI-N87, MKN-45, BGC-823 and SGC-7901, when compared with that in normal gastric epithelial cell line GES-1. Knockdown of OIP5-AS1 markedly suppressed the proliferation and colony formation activities of GC cells, induced G0/G1 arrest and apoptosis of GC cells in vitro, and restrained tumor growth in vivo. Mechanistically, OIP5-AS1 functions as an oncogenic competing endogenous RNA by binding to and sequestering miR-422a to elevate the expression of anoctamin-1. Our study first demonstrated that OIP5-AS1 is a critical and powerful regulator of GC pathogenesis and may represent a novel candidate target for GC therapy.

Aggregation-Induced Emission Gold Clustoluminogens for Enhanced Low-Dose X-ray-Induced Photodynamic Therapy.

The use of gold nanoparticles as radiosensitizers is an effective way to boost the killing efficacy of radiotherapy while drastically limiting the received dose and reducing the possible damage to normal tissues. Herein, we designed aggregation-induced emission gold clustoluminogens (AIE-Au) to achieve efficient low-dose X-ray-induced photodynamic therapy (X-PDT) with negligible side effects. The aggregates of glutathione-protected gold clusters (GCs) assembled through a cationic polymer enhanced the X-ray-excited luminescence by 5.2-fold. Under low-dose X-ray irradiation, AIE-Au strongly absorbed X-rays and efficiently generated hydroxyl radicals, which enhanced the radiotherapy effect. Additionally, X-ray-induced luminescence excited the conjugated photosensitizers, resulting in a PDT effect. The in vitro and in vivo experiments demonstrated that AIE-Au effectively triggered the generation of reactive oxygen species with an order-of-magnitude reduction in the X-ray dose, enabling highly effective cancer treatment.

Synthesis and Photoluminescence Properties of a Blue-Emitting La3Si8N11O4:Eu2+ Phosphor.

Eu2+-doped La3Si8N11O4 phosphors were synthesized by the high temperature solid-state method, and their photoluminescence properties were investigated in this work. La3Si8N11O4:Eu2+ exhibits a strong broad absorption band centered at 320 nm, spanning the spectral range of 300-600 nm due to 4f7 → 4f65d1 electronic transitions of Eu2+. The emission spectra show a broad and asymmetric band peaking at 481-513 nm depending on the Eu2+ concentration, and the emission color can be tuned in a broad range owing to the energy transfer between Eu2+ ions occupying two independent crystallographic sites. Compared to the Ce3+-doped La3Si8N11O4, the Eu2+-doped one shows a larger thermal quenching, predominantly owing to photoionization. Under 320 nm excitation, the internal and external quantum efficiencies are 44 and 33%, respectively.

Eu2+-Doped Sr2B2-2xSi2+3xAl2-xN8+x: A Boron-Containing Orange-Emitting Nitridosilicate with Interesting Composition-Dependent Photoluminescence Properties.

Novel Sr2-yEuyB2-2xSi2+3xAl2-xN8+x phosphors were investigated as a function of the boron and aluminum over silicon ratio and as a function of the Eu2+ concentration. Samples were prepared via solid-state reaction synthesis by carefully controlling the synthesis conditions and composition. At high boron and aluminum content, that is, x = 0, a Eu2+ 5d-4f emission is observed of which the maximum shifts from 595 nm for low Eu concentrations (y = 0.005) toward 623 nm for high Eu concentrations (y = 0.5). The samples can be excited by UV or blue light up to ∼475 nm. Substitution of [B2Al]9+ units by [Si3N]9+ units, increasing x up to 0.15, greatly improves the luminescence efficiency up to 46% and shows a very large redshift of the excitation bands with ∼100 nm, while the emission band shifts with ∼10 nm. The shifts are attributed to the lowering of the 5d level as a result of the decreased Eu-N distance upon substitution. Temperature-dependent measurements show that the Eu2+ 5d-4f emission is largely thermally quenched at room temperature for x = 0 due to thermal ionization toward the conduction band, explaining the low luminescence efficiency. The lowering of the 5d level at larger values of x reduces the thermal ionization and consequently increases the thermal stability and quantum efficiency, resulting in strongly luminescent blue-to-orange conversion phosphors that are interesting for light-emitting diode applications.

Study on Trap Levels in SrSi2AlO2N3:Eu2+,Ln3+ Persistent Phosphors Based on Host-Referred Binding Energy Scheme and Thermoluminescence Analysis.

We investigated the effect of trivalent lanthanide substitution on a novel oxynitride persistent phosphor SrSi2AlO2N3:Eu2+,Ln3+, which shows green persistent luminescence for more than 2 h. First, an energy level diagram by using the host-referred binding energy (HRBE) scheme was constructed. The location of the energy levels of all divalent and trivalent lanthanides referred to the energy band of the host SrSi2AlO2N3 was estimated. Then, thermoluminescence (TL) measurements in the target persistent phosphors were performed to obtain direct experimental results on the trap depth. We found that the trap levels based on the TL measurements coincided well with the 4f ground states of divalent lanthanide codopants in SrSi2AlO2N3:Eu2+,Ln3+. The result strongly suggests the effective traps for persistent luminescence in SrSi2AlO2N3:Eu2+,Ln3+ could be due to the aliovalent substitution of Ln3+ for Sr2+, which can be controlled by selecting suitable codopant Ln3+. The work shows the HRBE scheme may offer a way to understand the nature of defects in the persistent phosphor as well as a possible guideline to design new persistent phosphors with required trap depths.

Prevention of thermal- and moisture-induced degradation of the photoluminescence properties of the Sr2Si5N8:Eu(2+) red phosphor by thermal post-treatment in N2-H2.

A red phosphor of Sr2Si5N8:Eu(2+) powder was synthesized by a solid state reaction. The synthesized phosphor was thermally post-treated in an inert and reductive N2-H2 mixed-gas atmosphere at 300-1200 °C. The main phase of the resultant phosphor was identified as Sr2Si5N8. A passivation layer of ∼0.2 µm thickness was formed around the phosphor surface via thermal treatment. Moreover, two different luminescence centers of Eu(SrI) and Eu(SrII) in the synthesized Sr2Si5N8:Eu(2+) phosphor were proposed to be responsible for 620 nm and 670 nm emissions, respectively. More interestingly, thermal- and moisture-induced degradation of PL intensity was effectively reduced by the formation of a passivation layer around the phosphor surface, that is, the relative PL intensity recovered 99.8% of the initial intensity even after encountering thermal degradation; both moisture-induced degraded external and internal QEs were merely 1% of the initial QEs. The formed surface layer was concluded to primarily prevent the Eu(2+) activator from being oxidized, based on the systemic analysis of the mechanisms of thermal- and moisture-induced degradation.

Highly efficient narrow-band green and red phosphors enabling wider color-gamut LED backlight for more brilliant displays.

In this contribution, we propose to combine both narrow-band green (ß-sialon:Eu(2+)) and red (K(2)SiF(6):Mn(4+)) phosphors with a blue InGaN chip to achieve white light-emitting diodes (wLEDs) with a large color gamut and a high efficiency for use as the liquid crystal display (LCD) backlighting. ß-sialon:Eu(2+), prepared by a gas-pressure sinteing technique, has a peak emission at 535 nm, a full width at half maximum (FWHM) of 54 nm, and an external quantum efficiency of 54.0% under the 450 nm excitation. K(2)SiF(6):Mn(4+) was synthesized by a twe-step co-precipitation methods, and exhibits a sharp line emission spectrum with the most intensified peak at 631 nm, a FWHM of ~3 nm, and an external quantum efficiency of 54.5%. The prepared three-band wLEDs have a high color temperature of 11,184 - 13,769 K (i.e., 7,828 - 8,611 K for LCD displays), and a luminous efficacy of 91 - 96 lm/W, measured under an applied current of 120 mA. The color gamut defined in the CIE 1931 and CIE 1976 color spaces are 85.5 - 85.9% and 94.3 - 96.2% of the NTSC stanadard, respectively. These optical properties are better than those phosphor-cpnverted wLED backlights using wide-band green or red phosphoprs, suggesting that the two narrow-band phosphors investigated are the most suitable luminescent materials for achieving more bright and vivid displays.

Strong Energy-Transfer-Induced Enhancement of Luminescence Efficiency of Eu(2+)- and Mn(2+)-Codoped Gamma-AlON for Near-UV-LED-Pumped Solid State Lighting.

A series of Eu(2+)- and Mn(2+)-codoped γ-AlON (Al1.7O2.1N0.3) phosphors was synthesized at 1800 °C under 0.5 MPa N2 by using the gas-pressure sintering method (GPS). Eu(2+) and Mn(2+) ions were proved to enter into γ-AlON host lattice by means of XRD, CL, and EDS measurements. Under 365 nm excitation, two emission peaks located at 472 and 517 nm, resulting from 4f(6)5d(1) → 4f(7) and (4)T1(4G) → (6)A1 electron transitions of Eu(2+) and Mn(2+), respectively, can be observed. Energy transfer from Eu(2+) to Mn(2+) was evidenced by directly observing appreciable overlap between the excitation spectrum of Mn(2+) and the emission spectrum of Eu(2+) as well as by the decreased decay time of Eu(2+) with increasing Mn(2+) concentration. The critical energy-transfer distance between Eu(2+) and Mn(2+) and the energy-transfer efficiency were also calculated. The mechanism of energy transfer was identified as a resonant type via a dipole-dipole mechanism. The external quantum efficiency was increased 7 times (from 7% for γ-AlON:Mn(2+) to 49% for γ-AlON:Mn(2+),Eu(2+) under 365 nm excitation), and color-tunable emissions from blue-green to green-yellow were also realized with the Eu(2+) → Mn(2+) energy transfer in γ-AlON.

Europium(ii)-activated oxonitridosilicate yellow phosphor with excellent quantum efficiency and thermal stability - a robust spectral conversion material for highly efficient and reliable white LEDs.

Knowing the physicochemical properties of a material is of great importance to design and utilize it in a suitable way. In this paper, we conduct a comprehensive survey of photoluminescence spectra, localized cathodoluminescence, temperature-dependent luminescence efficiency, and applications of Eu(2+)-doped Sr0.5Ba0.5Si2O2N2 in solid-state lighting. This phosphor exhibits a broad emission band with a maximum at 560-580 nm and a full-width at half maximum of 92-103 nm upon blue light excitation, whereas a dual-band emission (i.e., 470 nm and 550 nm) is observed under electron beam irradiation due to perhaps the intergrowth of BaSi2O2N2:Eu(2+) and Sr0.5+σBa0.5-σSi2O2N2:Eu(2+) in each phosphor particle. Under 450 nm blue light irradiation, this yellow phosphor exhibits excellent luminescence properties with absorption, internal and external efficiencies of 83.2, 87.7 and 72.6%, respectively. Furthermore, it also possesses high thermal stability, with the quantum efficiency being decreased by only 4.2% at 150 °C and a high quenching temperature of 450 °C. High-efficiency white LEDs using the title phosphor have a luminous efficacy, color temperature and color rendition of ∼120 lm W(-1), 6000 K and 61, respectively, validating its suitability for use in solid-state white lighting.

Water-Soluble Quantum Dots for Inkjet Printing Color Conversion Films with Simultaneous High Efficiency and Stability.

Water-soluble quantum dots (QDs) are necessary to prepare patterned pixels or films for high-resolution displays with less environmental burden but are very limited by the trade-off between photoluminescence and stability of QDs. In this work, we proposed synthesizing water-soluble QDs with simultaneous excellent luminescence properties and high stability by coating the amphiphilic poly(maleic anhydride-alt-1-octadecene)-ethanol amine (PMAO-EA) polymer on the surface of silane-treated QDs. These coated QDs show a photoluminescence quantum yield (PLQY) as high as 94%, and they have good photoluminescence stability against light irradiation and thermal attacks, owing to the suppression of the nonradiative recombination by the polymer layer and the isolation of oxygen and water by the silica layer. The water-soluble QDs, mixed with ethylene glycol, enable inkjet printing of QD color conversion films (QD-CCFs) with an average diameter of 68 µm for each pixel and a high PLQY of 91%. The QD-CCFs are demonstrated to fabricate red-emitting mini-LEDs by combining with blue mini-LED chips, which have an external quantum efficiency as high as 25.86% and a luminance of 2.44 × 107 cd/m2. We believe that the proposed strategy is applicable to other water-soluble QDs and paves an avenue for inkjet printing environmentally friendly QD-CCFs for mini/micro-LED displays.