RESUMO
A series of polyurethane hydrogel and polyurethane thermoplastic elastomer composite based separation membranes were successfully prepared via wet phase inversion method. The morphology, chemical structure, phase transition temperature and crystallinity of the polyurethane (PU) membranes were characterized by SEM, FTIR, DSC, and XRD, respectively. The SEM observation showed that the PU membranes exhibited irregular porous structure on the surface and path of the hole was flexural and asymmetrical in cross-section. The FTIR analysis demonstrated that thermalsensitive groups and pH-sensitive components (-N(CH3)-) were incorporated into the PU network. The DSC experiment and XRD experiment showed that the regular arrangement of PU network was destroyed partly due to the introduction of polyurethane thermoplastic elastomer. The equilibrium swelling ratio (ESR) and water flux (J) for PU membranes clearly decreased and increased with functional groups and sophisticated structure of PU membranes, respectively. In addition, the permeation experiments indicated that the permeation percentage (P) of the glycine was strongly affected by the external temperature and pH value.