First-principles study of multifunctional Mn2B3 materials with high hardness and ferromagnetism.

Transition metal boride TM2B3 is widely studied in the field of physics and materials science. However, Mn2B3 has not been found in Mn-B systems so far. Mn2B3 undergoes phase transitions from Cmcm (0-28 GPa) to C2/m (28-80 GPa) and finally to C2/c (80-200 GPa) under pressure. Among these stable phases, Cmcm- and C2/m-Mn2B3s comprise six-membered boron rings and C2/c-Mn2B3 has wavy boron chains. They all have good mechanical properties and can become potential multifunctional materials. The strong B-B covalent bonding is mainly responsible for the structural stability and hardness. Comparison of the hardness of the five TM2B3s with different bonding strengths of TM-B and B-B bonds reveals a nonlinear change in the hardness. According to the Stoner model, these structures possess ferromagnetism, and the corresponding magnetic moments are almost the same as those of GGA and GGA + U (U = 3.9 eV, J = 1 eV).

Heavy metals pollution of soil in central plains urban agglomeration (CPUA), China: human health risk assessment based on Monte Carlo simulation.

The present study conducted the concentration evaluation, pollution assessment, source analysis, and risk assessment of heavy metals in the soil of the CPUA, China, to contribute to the smooth construction of urban agglomeration. Elevated levels of mean concentrations of cadmium (Cd), chromium (Cr), and copper (Cu) in the soils were shown compared to background values. Cu and zinc (Zn) and also lead (Pb) and Cd exhibited spatial similarity. Manganese (Mn) and Cr exhibited point source characteristics such as the concentrations at a point much higher than the surrounding area. The potential ecological risk in the northern region belonged to the moderate risk level category. Cd contributed over 90% to the potential ecological risk. The health risk among children was higher than that among adults. The major exposure pathways were different for adults and children. Exposure, as shown using Hazard Index (HI), to adults was mainly through the skin contact route, while to children was through both the skin contact and ingestion route. The primary CR (carcinogenic risk) to adults was through the inhalation route, while that to children was through the ingestion route. In both children and adults, Cr was the main contributor to HI and CR. According to the Monte Carlo simulation results, the cumulative probability of exceeding the critical value of HI for children was approximately 2.8-3.0 times that for adults. According to the sensitivity analysis results, non-carcinogenic risk prevention should begin mainly by reducing exposure duration and skin contact. The cancer risk may be reduced primarily by decreasing the exposure duration and controlling ingestion. The PMF (Positive Matrix Factorization) source analysis revealed that Pb mainly came from transportation sources. In addition, Cu, Pb, and Mn were derived mainly from agricultural sources. Cr was derived mostly from a natural source, and Cd originated mainly from an industrial source.

The health risk assessment of Heavy Metals (HMs) in road dust based on Monte Carlo simulation and bio-toxicity: a case study in Zhengzhou, China.

Heavy metals (HMs) in road dust pose a significant threat to human health. The analysis of human health risks of HMs is an important theoretical basis for risk screening and management. The chemical forms and characteristics of HMs in road dust were analyzed. Based on the bio-toxicity of the different fractions of the HMs and Monte Carlo, three assessment models, including the health risk assessment based on bio-toxicity, the health risk assessment based on the Monte Carlo simulation, and the health risk assessment based on the Monte Carlo simulation and bio-toxicity, were established. Under the Traditional Model, the non-carcinogenic risks were only harmful to children, while the carcinogenic risks were not harmful to adults and children. Under the M-Traditional Model, the probability of non-carcinogenic risks being harmful to children's health was 83.17%. The probability that carcinogenic risks pose a threat to children's health was 28.61%. Considering the bio-toxicity of HMs in different chemical forms, non-carcinogenic risks and carcinogenic risks under the B-Traditional Model were all less than the corresponding critical values, indicating that the HMs in the road dust did no harm to both the adults and children. Based on the MB-Traditional Model, the chance of non-carcinogenic risks being harmful to children's health is 15.43%. Among different HMs, the non-carcinogenic risks of As are highest and the carcinogenic risks of Cr were the highest, so As and Cr should be listed as priority control contamination. MB-Traditional Model established in this study simultaneously considered bio-toxicity and random simulation and obtained more accurate results, which could provide a theoretical basis for risk analysis and management.

Photonic spin Hall effect: a new window in D-shaped fiber by weak measurements.

The enhanced photonic spin Hall effect (SHE) based on the D-shaped fiber with Ag-Ni alloy/silicon layers is proposed and theoretically investigated under excitation of surface plasmon resonance (SPR). In order to achieve the maximum transverse spin-dependent displacements for practical photonic devices, parameters such as the thickness of the Ag-Ni alloy and silicon layers in the D-shaped fiber are optimized. Theoretical modeling and numerical simulation demonstrate that the multilayer structure can effectively enhance the photonic SHE. The maximum transverse shift of 420 µm obtained with optimized parameters is larger than those in the literature. In addition, a maximum angular sensitivity of 114.6°/RIU is achieved by the wavelength interrogation method. Our concept and theoretical assessment suggest a novel and effective means to enhance the photonic SHE, bring us one step closer to the possibility to characterize parameters of dielectric layers by weak measurements, and accelerate the development of optical fibers based on the photonic SHE.

Revealing the Unusual Rigid Boron Chain Substructure in Hard and Superconductive Tantalum Monoboride.

Poor electrical conductivity severely limits the diverse applications of high hardness materials in situations where electrical conductivities are highly desired. A "covalent metal" TaB with metallic electrical conductivity and high hardness has been fabricated by a high pressure and high temperature method. The bulk modulus, 302.0(4.9) GPa, and Vickers hardness, 21.3 GPa, approaches and even exceeds that of traditional insulating hard materials. Meanwhile, temperature-dependent electrical resistivity measurements show that TaB possesses metallic conductivity that rivals some widely-used conductors, and it will transform into a superconductor at Tc =7.8 K. Contrary to common understanding, the hardness of TaB is higher than that of TaB2 , which indicates that low boron concentration borides could be mechanically better than the higher boron concentration counterparts. Compression behavior and first principles calculations denote that the high hardness is associated with the ultra-rigid covalent boron chain substructure. The hardness of TaB with different topologies of boron substructure shows that besides incorporating higher boron content, manipulating light element backbone configurations is also critical for higher hardness amongst transition metal borides with identical boron content.

Role of TM-TM Connection Induced by Opposite d-Electron States on the Hardness of Transition-Metal (TM = Cr, W) Mononitrides.

Recent reports exposed an astonishing factor of high hardness that the connection between transition-metal (TM) atoms could enhance hardness, which is in contrast to the usual understanding that TM-TM will weaken hardness as the source of metallicity. It is surprising that there are two opposite mechanical characteristics in the one TM-TM bond. To uncover the intrinsic reason, we studied two appropriate mononitrides, CrN and WN, with the same light-element (LE) content and valence electron concentration. The two high-quality compounds were synthesized by a new metathesis under high pressure, and the Vickers hardness is 13.0 GPa for CrN and 20.0 GPa for WN. Combined with theoretical calculations, we found that the strong correlation of d electrons in TM-TM could seriously affect hardness. Thus, we make the complementary suggestions of the previous hardness factors that the antibonding d-electron state in TM-TM near the Fermi level should be avoided and a strong d covalent coupling in TM-TM is very beneficial for high hardness. Our results are very important for the further design of high-hardness and multifunctional TM and LE compounds.

Double-zigzag boron chain-enhanced Vickers hardness and manganese bilayers-induced high d-electron mobility in Mn3B4.

The D7b-type structure Mn3B4 was fabricated by high-temperature and high-pressure (HPHT) methods. Hardness examination yielded an asymptotic Vickers hardness of 16.3 GPa, which is much higher than that of Mn2B and MnB2. First principle calculations and XPS results demonstrated that double zigzag boron chains form a strong covalent skeletons, which enhances this structure's integrity with high hardness. Considering that the hardensses of MnB and Mn3B4 are higher than those of Mn2B and MnB2, zigzag and double zigzag boron backbones are superior to isolated boron and graphite-like boron layer backbones for achieving higher hardness. This situation also states that a higher boron content is not the sole factor for the higher hardness in the low boron content transition metal borides. Futhermore, the co-presence of metallic manganese bilayers contribute to the high d-electron mobility and generate electrical conductivity and antiferromagnetism in Mn3B4 which provide us with a new structure prototype to design general-purpose high hardness materials.

Fano resonances in symmetric plasmonic split-ring/ring dimer nanostructures.

The optical properties of symmetric split-ring/ring dimer (SRRD) nanostructures composed of a small nanoring surrounded by an Ag splitting nanoring with a larger diameter are calculated theoretically. The apparent asymmetric Fano line shape in the spectra is related to fast switching of the bonding modes between the split-ring plasmon and ring dipole. The influence of the dimensions of the SRRD nanostructures on the spectral positions and intensity of Fano resonance is studied, and the asymmetric Fano line shape can be flexibly adjusted by varying the geometric parameters. In addition, relatively simple SRRD nanostructures have the same overall sensing figures of merit as conventional nanoparticles, thus rendering them suitable for high-performance optical sensors.

Tunable single-polarization bimetal-coated and liquid-filled photonic crystal fiber filter based on surface plasmon resonance.

A bimetal-coated single-polarization photonic crystal fiber (PCF) filter based on surface plasmon resonance (SPR) with a liquid-filled structure is designed and calculated by the finite element method (FEM). The filter has many excellent properties. The y-polarized and x-polarized modes can simultaneously filter at 1310 nm and 1560 nm with unwanted losses 544.3 dB/cm and 147.3 dB/cm, respectively, corresponding to polarized losses as low as 12.3 dB/cm and 24.0 dB/cm. The filtering range can be tuned by adjusting the diameter of the outer air holes (d1), the diameter of the inner air holes (d2), and liquid refractive index n. The filtering ranges of x-polarization and y-polarization are 1550-1990 nm and 1310-1830 nm, respectively. The crosstalk (CT) values are 462.0 dB and -107.1 dB and corresponding available bandwidths are 224 nm and 504 nm at 1310 nm and 1560 nm, respectively.

Dual-band directional scattering with all-dielectric trimer in the near-infrared region.

A silicon trimer is explored to tailor unidirectional forward scattering at multiple wavelengths in the near-infrared region with low loss using theoretical calculations and numerical simulations, which leads to the dramatic enhancement in unidirectional forward scattering and suppression of backward scattering. The higher moments in the trimer can be properly excited and balanced by breaking the symmetry of the trimer. The generalized Kerker conditions at two different wavelengths can be achieved in the trimer to further improve the scattering directivity. Our results provide insights into future development of all-dielectric low-loss nanoantennas in the near-infrared region.

Emergent property of high hardness for C-rich ruthenium carbides: partial covalent Ru-Ru bonds.

Hard materials are being investigated all the time by combining transition metals with light elements. Combining a structure search with first-principles functional calculations, we first discovered three stable stoichiometric C-rich ruthenium carbides in view of three synthesis routes, namely, the ambient phases of Ru2C3 and RuC, and two high pressure phases of RuC4. There is a phase transition of RuC4 from the P3[combining macron]m1 structure to the R3[combining macron]m structure above 98 GPa. The calculations of elastic constants and phonon dispersions show their mechanical and dynamical stability. The large elastic modulus, high Debye temperature and the estimated hardness values suggest that these hard ruthenium carbides have good mechanical properties. The analyses of electronic structure and chemical bonding indicate that chemical bonding, not carbon content, is the key factor for the hardness in these metallic C-rich ruthenium carbides. The partial covalent Ru-C bonds and strong covalent C-C bonds are responsible for the high hardness. Moreover, the emergence of partial covalent Ru-Ru bonds can enhance the hardness of RuC, while the ionic Ru-Ru bonds can weaken the hardness of Ru2C3.

Real-time HER2 status detected on circulating tumor cells predicts different outcomes of anti-HER2 therapy in histologically HER2-positive metastatic breast cancer patients.

BACKGROUND: This study was initiated to investigate the difference in HER2 status between tumor tissue and circulating tumor cells (CTCs), as well as the predictive value of CTC HER2 status for predicting the outcomes of anti-HER2 therapy in histologically HER2-positive metastatic breast cancer (MBC) patients. METHODS: HER2 expression on CTCs was detected using a CellSearch system within 7 days before a new line of anti-HER2 therapy was begun. According to the criterion proposed in our previous report, patients were defined as CTC HER2-positive or -negative. After close follow-up, the correlation between CTC HER2 status and the outcome of the treatment was evaluated by statistical analysis. RESULTS: CTCs were detected in 57.4 % (58/101) of the patients. Notably, 62.1 % (36/58) of these patients had an inconsistent HER2 status between their tissue and CTCs. The discordant rate may correlate with the time interval between histological and CTC HER2 testing and is more likely to occur in the subgroup of patients with an interval of > 1 year than in those with an interval < 1 year (70.7 % vs. 41.2 %, P = 0.043). For PFS, positive HER2 status on CTCs was shown to be a valuable predictor, both in univariate (HR = 0.321, 95%CI, 0.156-0.62, P = 0.0011) and multivariate (HR = 0.383, 95%CI, 0.166-0.831, P = 0.019) Cox regression analysis. Meanwhile, Kaplan-Meier survival curves revealed that the median PFS of CTC HER2-positive patients was significantly longer than CTC HER2-negative ones (8.5 vs. 3.5 months, P < 0.001). CONCLUSIONS: HER2 status on CTCs was different from that of tumor tissues and predicted a different outcome of the patients' anti-HER2 therapy. This difference may be correlated with the time interval between tissue and CTC HER2 testing, indicating the necessity of real-time HER2 analysis for histologically HER2-positive MBC patients.

Investigating Robust Honeycomb Borophenes Sandwiching Manganese Layers in Manganese Diboride.

We report a robust honeycomb boron layers sandwiching manganese layers compound, MnB2, synthesized by high pressure and high temperature. First-principle calculation combined with X-ray photoelectron spectrum unravel that the honeycomb boron structure was stabilized by filling the empty π-band via grabbing electrons from manganese layers. Honeycomb boron layers sandwiching manganese layers is an extraordinary prototype of this type of sandwiched structure exhibiting electronic conductivity and ferromagnetism. Hydrostatic compression of the crystal structure, thermal expansion, and the hardness testing reveal that the crystal structure is of strong anisotropy. The strong anisotropy and first-principle calculation suggests that B-B bonds in the honeycomb boron structure are a strong directional covalent feature, while the Mn-B bonds are soft ionic nature. Sandwiching honeycomb boron layers with manganese layers that combine p-block elements with magnetic transition metal elements could endow its novel physical and chemical properties.

Ground state structures of tantalum tetraboride and triboride: an ab initio study.

Tantalum-boron compounds, which are potential candidates for superhard multifunctional materials, may possess multiple stoichiometries and structures under pressure. Using first-principle methods, ground-state TaB3 with the monoclinic C2/m space group and high-pressure TaB4 with the orthorhombic Amm2 space group have been found. They are more stable than the previously proposed structures. High-pressure boron-rich Amm2-TaB4 can be quenched to ambient pressure. The ground-state C2/m-TaB3 and high-pressure Amm2-TaB4 are two potential ultra-incompressible and hard materials with a calculated hardness of 17.02 GPa and 30.02 GPa at ambient pressure, respectively. Detailed electronic structure and chemical bonding analysis proved that the high hardness value of Amm2-TaB4 mainly stems from the strong covalent boron-boron bonds in graphene-like B layers as well as B-B bonds between layers.

MiRNA-145-5p inhibits gastric cancer progression via the serpin family E member 1- extracellular signal-regulated kinase-1/2 axis.

BACKGROUND: MicroRNAs (miRNAs) regulate gene expression and play a critical role in cancer physiology. However, there is still a limited understanding of the function and regulatory mechanism of miRNAs in gastric cancer (GC). AIM: To investigate the role and molecular mechanism of miRNA-145-5p (miR145-5p) in the progression of GC. METHODS: Real-time polymerase chain reaction (RT-PCR) was used to detect miRNA expression in human GC tissues and cells. The ability of cancer cells to migrate and invade was assessed using wound-healing and transwell assays, respectively. Cell proliferation was measured using cell counting kit-8 and colony formation assays, and apoptosis was evaluated using flow cytometry. Expression of the epithelial-mesenchymal transition (EMT)-associated protein was determined by Western blot. Targets of miR-145-5p were predicated using bioinformatics analysis and verified using a dual-luciferase reporter system. Serpin family E member 1 (SERPINE1) expression in GC tissues and cells was evaluated using RT-PCR and immunohistochemical staining. The correlation between SERPINE1 expression and overall patient survival was determined using Kaplan-Meier plot analysis. The association between SERPINE1 and GC progression was also tested. A rescue experiment of SERPINE1 overexpression was conducted to verify the relationship between this protein and miR-145-5p. The mechanism by which miR-145-5p influences GC progression was further explored by assessing tumor formation in nude mice. RESULTS: GC tissues and cells had reduced miR-145-5p expression and SERPINE1 was identified as a direct target of this miRNA. Overexpression of miR-145-5p was associated with decreased GC cell proliferation, invasion, migration, and EMT, and these effects were reversed by forcing SERPINE1 expression. Kaplan-Meier plot analysis revealed that patients with higher SERPINE1 expression had a shorter survival rate than those with lower SERPINE1 expression. Nude mouse tumorigenesis experiments confirmed that miR-145-5p targets SERPINE1 to regulate extracellular signal-regulated kinase-1/2 (ERK1/2). CONCLUSION: This study found that miR-145-5p inhibits tumor progression and is expressed in lower amounts in patients with GC. MiR-145-5p was found to affect GC cell proliferation, migration, and invasion by negatively regulating SERPINE1 levels and controlling the ERK1/2 pathway.

[Acupoint application for Hashimoto's thyroiditis with liver-qi stagnation: a randomized controlled trial].

OBJECTIVE: To observe the clinical efficacy and safety of acupoint application for Hashimoto's thyroiditis (HT) with liver-qi stagnation. METHODS: One hundred and fifty patients of HT with liver-qi stagnation were randomly divided into an acupoint application group (75 cases, 11 cases were excluded, 5 cases dropped out) and a control group (75 cases, 12 cases excluded, 3 cases dropped out). Based on the health education combined with conventional western medicine treatment, the patients in the acupoint application group were treated with acupoint application, while the patients in the control group were treated with placebo acupoint application. Shenque (CV 8), bilateral Yongquan (KI 1), Yeshi, and ashi point were selected in both groups, with Yeshi treated once a week and the remaining acupoints treated every other day, for a total of 4 weeks. The serum levels of thyroglobulin antibody (TgAb), thyroid peroxidase antibody (TPOAb), free triiodothyronine (FT3), free thyroxine (FT4), and thyroid-stimulating hormone (TSH), as well as the thickness of thyroid left lobe, right lobe, and isthmus, TCM symptom score, hospital anxiety and depression scale (HADS) score, and MOS 36-item short form health survey (SF-36) score were compared between the two groups before and after treatment. Adverse reactions in both groups were observed. RESULTS: Compared with before treatment, in the acupoint application group, the serum levels of TgAb and TPOAb were reduced after treatment (P<0.05), and the scores of role physical (RP), body pain (BP), vitality (VT), role emotional (RE), and mental health (MH) in SF-36 were increased after treatment (P<0.01, P<0.001). The thickness of the thyroid isthmus after treatment was smaller than that before treatment (P<0.05), and the TCM symptom scores and HADS anxiety (HADS-A) scores after treatment were lower than those before treatment (P<0.001, P<0.01) in both groups. In the control group, the scores of physical function (PF), RP, BP, VT, and RE in SF-36 after treatment were higher than those before treatment (P<0.05, P<0.01, P<0.001). There was no statistically significant difference in serum FT3, FT4, and TSH levels within the groups (P>0.05). There was no statistically significant difference in the above indexes between the two groups (P>0.05). The incidence of adverse reactions in the acupoint application group and the control group was 20.0% (15/75) and 10.7% (8/75) respectively, with skin allergy being the main adverse reaction. CONCLUSION: Acupoint application could reduce the serum levels of TgAb and TPOAb in patients of HT with liver-qi stagnation, alleviate thyroid enlargement, improve TCM symptoms and anxiety, and improve quality of life, with safe and reliable clinical efficacy.

Enhancing intercropping sustainability: Manipulating soybean rhizosphere microbiome through cropping patterns.

Understanding the responses of soybean rhizosphere and functional microbiomes in intercropping scenarios holds promise for optimizing nitrogen utilization in legume-based intercropping systems. This study investigated three cropping layouts under film mulching: sole soybean (S), soybean-maize intercropping in one row (IS), and soybean-maize intercropping in two rows (IIS), each subjected to two nitrogen levels: 110 kg N ha-1 (N110) and 180 kg N ha-1 (N180). Our findings reveal that cropping patterns alter bacterial and nifh communities, with approximately 5 % of soybean rhizosphere bacterial amplicon sequence variants (ASVs) and 42 % of rhizosphere nifh ASVs exhibiting altered abundances (termed sensitive ASVs). Root traits and soil properties shape these communities, with root traits exerting greater influence. Sensitive ASVs drive microbial co-occurrence networks and deterministic processes, predicting 85 % of yield variance and 78 % of partial factor productivity of nitrogen, respectively. These alterations impact bacterial and nifh diversity, complexity, stability, and deterministic processes in legume-based intercropping systems, enhancing performance in terms of yield, nitrogen utilization efficiency, land equivalent ratio, root nodule count, and nodule dry weight under IIS patterns with N110 compared to other treatments. Our findings underscore the importance of field management practices in shaping rhizosphere-sensitive ASVs, thereby altering microbial functions and ultimately impacting the productivity of legume-based intercropping systems. This mechanistic understanding of soybean rhizosphere microbial responses to intercropping patterns offers insights for sustainable intercropping enhancements through microbial manipulation.

International tourism and business productivity: does eco-friendly technologies matter?

This research is aimed at determining whether eco-friendly technologies go beyond and above in providing business productivity in international tourism. For this, the study obtained data from different databases, and this data range consisted of 2010-2020. The study applied the co-integration analysis, random and static technique, regression analysis technique, split analysis technique, and mediating effect tests on Chinese data. This research shows that tourism business innovation contributed 12%, value proposition as 9%, internal marketing as 16%, customer relationship management as 19.3%, tourists motivation as 34.05%, tourists time as 18.94%, green technological adoption as 17.3%, tourists visit intention as 8.11%, and green technical transfer as 28.1% in study model. Thus, the findings confirmed that international tourism and business productivity have a dynamic empirical nexus with the mediating role of eco-friendly technology adoption. Furthermore, such findings are robust empirically and validate the empirical connections among the study variables. These results imply that Chinese tourism industry stakeholders may use eco-friendly technologies to good effect, significantly enhancing tourism business productivity, international tourists' satisfaction, and tourists' revisit intentions. Hence, the study also directs practical implications related to the study topicality and China's tourism industry for prudent growth acquisition.

Effect of anesthesia assistance on the detection rate of precancerous lesions and early esophageal squamous cell cancer in esophagogastroduodenoscopy screening: A retrospective study based on propensity score matching.

Background: Esophagogastroduodenoscopy (EGD) screening is vital for the early diagnosis of esophageal squamous cell cancer (ESCC). However, improvement in the detection rate of precancerous lesions and early ESCC with anesthesia assistance (AA) has not yet been investigated. This retrospective study aimed to evaluate the effect of AA on the detection rate of precancerous lesions and early ESCC in patients undergoing EGD screening and identify risk factors affecting the detection rate. Methods: We reviewed patients' electronic medical records who underwent EGD screening between May 2019 and August 2020. Patients were divided into two groups based on whether they received AA: those in Group A underwent EGD screening with AA, and patients in Group O underwent EGD screening without AA. Propensity score matching (PSM) was used to account for differences in baseline characteristics. Detection rates of precancerous lesions and early ESCC were compared between the two groups following PSM. Binary logistic regression was used to identify risk factors affecting the detection rate. Results: The final analysis included 21,835 patients (Group A = 13,319, Group O = 8,516) from 28,985 patients who underwent EGD screening during the study period. Following PSM, 6009 patients remained in each group for analysis. There was no significant difference in the detection rate of precancerous lesions and early ESCC between Groups A and O (1.1% vs. 0.8%, p > 0.05). Binary logistic regression showed that age (50-59 years, 60-69 years and 70-79 years), higher endoscopist seniority, high-definition (HD) endoscopy, narrow-band imaging (NBI), and number of endoscopic images were all independent risk factors that affected the detection rate of precancerous lesions and early ESCC. Conclusion: There was no statistically significant difference in the detection rate of precancerous lesions and early ESCC between patients who underwent EGD screening with and without AA. All independent risk factors that affected the detection rate of precancerous lesions and early ESCC included the following: age (50-59 years, 60-69 years and 70-79 years), higher endoscopist seniority, HD endoscopy, NBI, and number of endoscopic images. Endoscopists should consider all these factors as much as possible when performing EGD screening.

Conservation priority and run of homozygosity pattern assessment of global chicken genetic resources.

The conservation of genetic resources is becoming increasingly important for the sustainable development of the poultry industry. In the present study, we systematically analyzed the population structure, conservation priority, runs of homozygosity (ROH) of chicken breeds globally, and proposed rational conservation strategies. We used a 600K Affymetrix Axiom HD genotyping SNP array dataset of 2,429 chickens from 134 populations. The chickens were divided into 5 groups based on their country of origin and sampling location: Asian chickens (AS-LOC), African chickens (AF), European local chickens (EU-LOC), Asian breeds sampled in Germany (AS-DE), and European breeds sampled in Germany (EU-DE). The results indicated that the population structure was consistent with the actual geographical distribution of the populations. AS-LOC had the highest positive contribution to the total gene (HT, 1.00%,) and allelic diversity (AT, 0.0014%), the lowest inbreeding degree and the fastest linkage disequilibrium (LD) decay rate; the lowest contribution are derived by European ex situ chicken breeds (EU-DE:HT = -0.072%, AT = -0.0014%), which showed the highest inbreeding and slowest LD decay. Breeds farmed in ex situ (AS-DE, EU-DE) conditions exhibited reduced genetic diversity and increased inbreeding due to small population size. Given limited funds, it is a better choice for government to conserve the breeds with the highest contribution to genetic diversity in each group. Therefore, we evaluated the contribution of each breed to genetic and allelic diversity in 5 groups. Among each group, KUR(AF), BANG(AS-LOC), ALxx(EU-LOC), BHwsch(AS-DE), and ARw(EU-DE) had the highest contribution to gene diversity in the order of the above grouping. Similarly, according to the allelic diversity standard (in the same order), ZIMxx, PIxx, ALxx, SHsch, and ARsch had the highest contribution. After analyzing ROH, we found a total of 144,708 fragments and 27 islands. The gene and genome regions identified by the ROH islands and QTLs indicate that chicken breeds have potential for adaptation to different production systems. Based on these findings, it is recommended to prioritize the conservation of breeds with the highest genetic diversity in each group, while paying more attention to the conservation of Asian and African breeds. Furthermore, providing a valuable reference for the conservation and utilization of chicken.