Constructing Novel High Dielectric Constant Polyimides Containing Dipolar Pendant Groups with Enhanced Orientational Polarization.

Polymer dielectrics with high dielectric constant are urgently demanded for potential electrical and pulsed power applications. The design of polymers with side chains containing dipolar groups is considered an effective method for preparing materials with a high dielectric constant and low loss. This study synthesizes and comprehensively compare the dielectric properties of novel polyimides with side chains containing urea (BU-PI), carbamate (BC-PI), and sulfonyl (BS-PI) functional groups. The novel polyimides exhibit relatively high dielectric constant and low dielectric loss values due to the enhanced orientational polarization and suppressed dipole-dipole interactions of dipolar groups. In particular, BU-PI containing urea pendant groups presents the highest dielectric constant of 6.14 and reasonably low dielectric loss value of 0.0097. The strong γ transitions with low activation energies derived from dielectric spectroscopy measurements have been further evaluated to demonstrate the enhanced free rotational motion of urea pendant dipoles. In energy storage applications, BU-PI achieves a discharged energy density of 6.92 J cm-3 and a charge-discharge efficiency above 83% at 500 MV m-1. This study demonstrates that urea group, as dipolar pendant group, can provide polymers with better dielectric properties than the most commonly used sulfonyl groups.

Ferroelectric polymers exhibiting behaviour reminiscent of a morphotropic phase boundary.

Piezoelectricity-the direct interconversion between mechanical and electrical energies-is usually remarkably enhanced at the morphotropic phase boundary of ferroelectric materials1-4, which marks a transition region in the phase diagram of piezoelectric materials and bridges two competing phases with distinct symmetries1,5. Such enhancement has enabled the recent development of various lead and lead-free piezoelectric perovskites with outstanding piezoelectric properties for use in actuators, transducers, sensors and energy-harvesting applications5-8. However, the morphotropic phase boundary has never been observed in organic materials, and the absence of effective approaches to improving the intrinsic piezoelectric responses of polymers9,10 considerably hampers their application to flexible, wearable and biocompatible devices. Here we report stereochemically induced behaviour in ferroelectric poly(vinylidene fluoride-co-trifluoroethylene) (P(VDF-TrFE)) copolymers, which is similar to that observed at morphotropic phase boundaries in perovskites. We reveal that compositionally tailored tacticity (the stereochemical arrangement of chiral centres related to the TrFE monomers11,12) can lead to intramolecular order-to-disorder evolution in the crystalline phase and thus to an intermediate transition region that is reminiscent of the morphotropic phase boundary, where competing ferroelectric and relaxor properties appear simultaneously. Our first-principles calculations confirm the crucial role of chain tacticity in driving the formation of this transition region via structural competition between the trans-planar and 3/1-helical phases. We show that the P(VDF-TrFE) copolymer with the morphotropic composition exhibits a longitudinal piezoelectric coefficient of -63.5 picocoulombs per newton, outperforming state-of-the-art piezoelectric polymers10. Given the flexibility in the molecular design and synthesis of organic ferroelectric materials, this work opens up the way for the development of scalable, high-performance piezoelectric polymers.

Anisotropic Semicrystalline Homopolymer Dielectrics for High-Temperature Capacitive Energy Storage.

High-temperature dielectric polymers are in high demand for powering applications in extreme environments. Here, we have developed high-temperature homopolymer dielectrics with anisotropy by leveraging the hierarchical structure in semicrystalline polymers. The lamellae have been aligned parallel to the surface in the dielectric films. This structural arrangement resembles the horizontal alignment of nanosheet fillers in polymer nanocomposites and nanosheet-like lamellae in block copolymers, which has been proven to provide the optimal topological structure for electrical energy storage. The unique ordering of lamellae in our dielectric films endue a significantly increased breakdown strength and a reduced leakage current compared to amorphous films. This novel approach of enhancing the capacitive energy storage properties by controlled orientation of lamellae in homopolymer offers a new perspective for the design of high-temperature polymer dielectrics.

Side-Chain-Type High Dielectric-Constant Dipolar Polyimides with Temperature Resistance.

Innovative dielectric materials with high-temperature resistance and outstanding dielectric properties have attracted tremendous attention in advanced electronical fields. Polyimide(PI) is considered a promising candidate for the modern electronic industry due to its excellent dielectric properties and comprehensive properties. However, the limited-adjustable range of dielectric constant and the difficulty to obtain a high dielectric constant restrict the application of PI as high dielectric materials. Herein, a novel diamine monomer (2,2'-bis((methylsulfonyl)methyl)-[1,1'-biphenyl]-4,4'-diamine (BSBPA)) containing a rigid biphenyl structure and high dipolar sulfonyl pendant groups is designed for high dielectric polyimides. The rigid biphenyl and polar sulfonyl pendant groups can reasonably optimize the molecular structure and orientational polarization of polyimides to improve their dielectric properties and thermal properties. Moreover, the effect of different bridge linkages on the dielectric properties is studied by using the different dianhydrides. Thus, the PI-BSBPA films especially the DSDA-BSBPA film (DSDA: 3,3',4,4'-diphenylsulfonetetracarboxylic dianhydride) achieve great thermal properties (T5%d of 377 °C and Tg of 358 °C) and excellent dielectric properties (6.95 at 1 kHz) along with high discharged energy density of 5.25 J cm-3 and charge-discharge efficiency of 90%. The collaborative control of main-chain and side-chain engineering is effective to endow the polyimides with high-temperature tolerance and high dielectric performance.

Comparison of the imaging and clinical characteristics between Initial and Recurrent Alcoholic Acute Pancreatitis: a retrospective cross-sectional study.

MATERIALS: Patients with alcoholic acute pancreatitis in our hospital were recruited from Jan 2019 to July 2022 and divided into IAAP and RAAP groups. All patients underwent Contrast-Enhanced Computerized Tomography (CECT) or Magnetic Resonance Imaging (MRI) after administration. Imaging manifestations, local complications, severity scores on the Modified CT/MR Severity Index (MCTSI/MMRSI), Extrapancreatic Inflammation on CT/MR (EPIC/M), clinical severity [Bedside Index for Severity in Acute Pancreatitis (BISAP) Acute Physiology and Chronic Health Evaluation (APACHE-II)], and clinical prognosis were compared between the two groups.Results: 166 patients were recruited for this study, including 134 IAAP (male sex 94%) and 32 RAAP patients (male sex 100%). On CECT or MRI, IAAP patients were more likely to develop ascites and Acute Necrosis collection (ANC) than RAAP patients (ascites:87.3%vs56.2%; P = .01; ANC:38%vs18.7%; P < .05). MCTSI/MMRSI and EPIC/M scores were higher in IAAP than in RAAP patients(MCTSI/MMRSI:6.2vs5.2; P < .05; EPIC/M:5.4vs3.8; P < .05).Clinical severity scores (APACHE-II and BISAP), length of stay, and systemic complications [Systemic Inflammatory Response Syndrome (SIRS), respiratory failure] were higher in the IAAP group than in the RAAP group (P < .05). No mortality outcomes were reported in either group while hospitalized.Conclusions: Patients with IAAP had more severe disease than those with RAAP. These results may be helpful for differentiating care paths for IAAP and RAAP, which are essential for management and timely treatment in clinical practice.

PCL scaffold combined with rat tail collagen type I to reduce keratocyte differentiation and prevent corneal stroma fibrosis after injury.

The cornea is one of the major refractive eye components and could be easily injured. An ineffective healing of corneal stromal wound may cause fibrosis and even loss of vision. Therefore, it is pivotal to prevent corneal fibrosis after injury. In this study, a poly (ε-caprolactone) (PCL) microfibrous scaffold infused with rat tail collagen type I was fabricated to obtain a 3D composite material. Physical and biological properties of PCL/collagen scaffold were evaluated, the effect of PCL/collagen scaffold on the proliferation and differentiation of limbal stromal stem cells (LSSCs) were detected in vitro, the differentiation of keratocytes as well as the expression and arrangement of extracellular matrix (ECM) influenced by PCL/collagen scaffold were investigated in vivo. RNA-sequencing on normal and injured corneas was carried out to find out the differential enriched pathways and gene expression. We discovered that the PCL/collagen scaffold simulated the stromal structure with properties that were most similar to the native cornea, the PCL/collagen scaffold exhibited good mechanical and biological properties. We also observed that the PCL/collagen scaffold reduced keratocyte differentiation. Injured corneas treated with PCL/collagen scaffold exhibited more regular collagen distribution and less fibroblasts and myofibroblasts distribution. By RNA-sequencing, we observed that in injured group, ECM-related pathway was enriched and several ECM-related genes were up-regulated. This study provides evidence that application of PCL/collagen scaffold could be a new therapeutic strategy for corneal injury.

Chirality-induced relaxor properties in ferroelectric polymers.

Relaxor ferroelectrics exhibit outstanding dielectric, electromechanical and electrocaloric properties, and are the materials of choice for acoustic sensors, solid-state coolers, transducers and actuators1-4. Despite more than five decades of intensive study, relaxor ferroelectrics remain one of the least understood material families in ferroelectric materials and condensed matter physics5-14. Here, by combining X-ray diffraction, atomic force microscope infrared spectroscopy and first-principles calculations, we reveal that the relaxor behaviour of ferroelectric polymers originates from conformational disorder, completely different from classic perovskite relaxors, which are typically characterized by chemical disorder. We show that chain chirality is essential to the formation of the disordered helix conformation arising from local distortions of gauche torsional angles, which consequently give rise to relaxor properties in polymers. This study not only sheds light on the fundamental mechanisms of relaxor ferroelectrics, but also offers guidance for the discovery of new ferroelectric relaxor organic materials for flexible, scalable and biocompatible sensor and energy applications.

NIR-II AIEgens: A Win-Win Integration towards Bioapplications.

Fluorescence imaging in the second near-infrared (NIR-II) window facilitated by aggregation-induced emission luminogens (AIEgens) is an emerging research field. NIR-II AIEgens overcome limitations imposed by penetration depth and fluorescence efficiency, offering high-performance imaging with enhanced precision. Some reported NIR-II AIEgens demonstrate capabilities for fluorescence and photoacoustic bimodal imaging, and fluorescence imaging guided photothermal therapy, which not only improves diagnosis accuracy but provides an efficient theranostic platform to accelerate preclinical translation as well. This minireview summarizes recent efforts on exploiting NIR-II AIEgens with regard to molecular design strategies and bioapplications, and puts forward current challenges and promising prospects. This timely sketch should benefit the further exploitation of diverse and multifunctional NIR-II AIEgens for a wide array of applications.

Interface-Strengthened Polymer Nanocomposites with Reduced Dielectric Relaxation Exhibit High Energy Density at Elevated Temperatures Utilizing a Facile Dual Crosslinked Network.

High-temperature ceramic/polymer nanocomposites with large energy density as the reinforcement exhibit great potential for energy storage applications in modern electronic and electrical power systems. Yet, a general drawback is that the increased dielectric constant is usually achieved at the cost of decreased breakdown strength, thus leading to moderate improvement of energy density and even displaying a marked deterioration under high temperatures and high electric fields. Herein, a new strategy is reported to simultaneously improve breakdown strength and discharged energy density by a step-by-step, controllable dual crosslinking process, which constructs a strengthened interface as well as reduces molecular chains relaxation under elevated temperatures. Great breakdown strength and discharged energy density is achieved in the dual crosslinked network BT-BCB@DPAES nanocomposites at elevated temperatures when compared to noninterfacial-strengthened, BT/DPAES composites, i.e., an enhanced breakdown strength and a discharged energy density of 442 MV m-1 and 3.1 J cm-3 , increasing by 66% and 162%, and a stable cyclic performance over 10 000 cycles is demonstrated at 150 °C. Moreover, the enhancement through the synergy of two crosslinked networks is rationalized via a comprehensive phase-field model for the composites. This work offers a strategy to enhance the electric storage performances of composites at high temperatures.

Three-Pronged Attack by Homologous Far-red/NIR AIEgens to Achieve 1+1+1>3 Synergistic Enhanced Photodynamic Therapy.

Photodynamic therapy (PDT) has long been shown to be a powerful therapeutic modality for cancer. However, PDT is undiversified and has become stereotyped in recent years. Exploration of distinctive PDT methods is thus highly in demand but remains a severe challenge. Herein, an unprecedented 1+1+1>3 synergistic strategy is proposed and validated for the first time. Three homologous luminogens with aggregation-induced emission (AIE) characteristics were rationally designed based on a simple backbone. Through slight structural tuning, these far-red/near-infrared AIE luminogens are capable of specifically anchoring to mitochondria, cell membrane, and lysosome, and effectively generating reactive oxygen species (ROS). Notably, biological studies demonstrated combined usage of three AIE photosensitizers gives multiple ROS sources simultaneously derived from several organelles, which gives superior therapeutic effect than that from a single organelle at the same photosensitizers concentration. This strategy is conceptually and operationally simple, providing an innovative approach and renewed awareness of improving therapeutic effect through three-pronged PDT.

Evaluation of Structure-Function Relationships of Aggregation-Induced Emission Luminogens for Simultaneous Dual Applications of Specific Discrimination and Efficient Photodynamic Killing of Gram-Positive Bacteria.

Bacterial infectious diseases, especially those caused by Gram-positive bacteria, have been seriously threatening human health. Preparation of a multifunctional system bearing both rapid bacterial differentiation and effective antibacterial effects is highly in demand, but remains a severe challenge. Herein, we rationally designed and successfully developed a sequence of aggregation-induced emission luminogens (AIEgens) with orderly enhanced D-A strength. Evaluation of structure-function relationships reveals that AIEgens having intrinsic positive charge and proper ClogP value are able to stain Gram-positive bacteria. Meanwhile, one of the presented AIEgens (TTPy) can generate reactive oxygen species (ROS) in extraordinarily high efficiency under white light irradiation due to the smaller singlet-triplet energy gap. Thanks to the NIR emission, excellent specificity to Gram-positive bacteria, and effective ROS generation efficiency, TTPy has been proved to perform well in selective photodynamic killing of Gram-positive bacteria in vitro, such as S. aureus and S. epidermidis, even in S. aureus-infected rat wounds.

Bioinspired Polymer Nanocomposites Exhibit Giant Energy Density and High Efficiency at High Temperature.

Polymer dielectrics are ubiquitous in advanced electric energy storage systems. However, the relatively low operating temperature significantly menaces their widespread application at high temperatures, such as for hybrid vehicles and aerospace power electronics. Spider silk, a natural nanocomposite comprised of biopolymer chains and crystal protein nanosheets combined by multiple interfacial interactions, exhibits excellent mechanical properties even at elevated temperatures. Inspired by the hierarchical nanostructure of spider silk, poly(aryl ether sulfone) is anchored to the surface of wide bandgap artificial nanosheets to prepare the nanocomposites with nanoconfinement effect. The bioinspired strategy successfully improves the mechanical and electrical performances of the nanocomposite. Owing to the structural-enabled enhancements, the nanocomposites exhibit excellent breakdown strength and electrical energy storage performance at high temperatures. In detail, giant discharged energy density (2.7 J cm-3 ) and high charge-discharge efficiency (>90%) are simultaneously achieved at 150 °C and 400 MV m-1 . Notably, under 500 MV m-1 , the discharged energy density reaches 4.2 J cm-3 , which is the record high discharged energy density among polymer-based dielectrics at 150 °C. This work demonstrates a viable strategy to design high-temperature polymer dielectrics by constructing nanoconfinement in the nanocomposites.

Limbal niche cells can reduce the angiogenic potential of cultivated oral mucosal epithelial cells.

BACKGROUND: Autologous cultivated oral mucosal epithelial transplantation (COMET) is an important treatment for limbal stem cell deficiency. However, peripheral corneal neovascularization after surgery hinders its application. This study aims to employ a culture system using allogenic limbal niche cells (LNCs) instead of mouse-derived 3T3 cells as a feeder layer that could relieve postoperative neovascularization. METHODS: Rat oral mucosal epithelial cells (OMECs) were co-cultured with rat LNCs or 3T3 cells. Cultivated oral mucosal epithelial cells (COMECs) of different culture systems were identified by hematoxylin and eosin staining and immunocytochemistry. The expression levels of the angiogenesis-related factors were analyzed by RT-qPCR and western blotting/ELISA. Angiogenic potential was reconfirmed by cell viability and tube formation assays with human umbilical vein endothelial cells (HUVECs). RESULTS: COMECs were obtained from both culture systems successfully. Immunocytochemistry showed approximately equal percentages of positive staining cells for p63α (p = 0.9177), ABCG2 (p = 0.526), Ki67 (p = 0.0987), and CK3 (p = 0.4000) in COMECs of different groups. RT-qPCR and western blotting/ELISA showed that COMECs of the LNC group expressed a significantly lower amount of basic fibroblast growth factor (bFGF) (p = 0.0038 for RT-qPCR, p = 0.0026 for western blotting) but more pigment epithelium-derived factor (PEDF) (p = 0.0172 for RT-qPCR, p = 0.0253 for western blotting) and soluble fms-like tyrosine kinase-1 (sFlt-1) (p < 0.0001 for RT-qPCR, p = 0.0064 for ELISA) than the COMECs of the 3T3 group. Furthermore, compared with COMECs of the 3T3 group, COMECs of the LNC group could reduce the viability (p = 0.0002) and tube formation (p = 0.0002) of HUVECs. CONCLUSIONS: LNCs could substitute 3T3 cells for expanding OMECs in vitro, and the COMECs obtained in this system are less likely to induce postsurgical neovascularization, which provides an alternative option for an ex vivo culture system and promotes the application of COMET.

Boosting Non-Radiative Decay to Do Useful Work: Development of a Multi-Modality Theranostic System from an AIEgen.

The efficient utilization of energy dissipating from non-radiative excited-state decay of fluorophores was only rarely reported. Herein, we demonstrate how to boost the energy generation of non-radiative decay and use it for cancer theranostics. A novel compound (TFM) was synthesized which possesses a rotor-like twisted structure, strong absorption in the far red/near-infrared region, and it shows aggregation-induced emission (AIE). Molecular dynamics simulations reveal that the TFM aggregate is in an amorphous form consisting of disordered molecules in a loose packing state, which allows efficient intramolecular motions, and consequently elevates energy dissipation from the pathway of thermal deactivation. These intrinsic features enable TFM nanoparticles (NPs) to display a high photothermal conversion efficiency (51.2 %), an excellent photoacoustic (PA) effect, and effective reactive oxygen species (ROS) generation. In vivo evaluation shows that the TFM NPs are excellent candidates for PA imaging-guided phototherapy.

[Prevalence and molecular characterization of Giardia lamblia isolates from goats in Anhui Province].

Five hundred and six fresh fecal samples were collected from Lu'an, Fuyang, Suzhou, Chizhou, Wuhu, Chuzhou and Bozhou in Anhui Province, and detected firstly by direct smear microscopy. The microscopy-positive samples were amplified by nested PCR targeting the triosephosphate isomerase (TPI) and glutamate dehydrogenase(GDH) genes. The positive PCR products were sequenced in both directions. The sequences were analyzed by ClustalX 1.81 for sequence alignment and the neighbor-joining trees were constructed by Mega 5.05. Thirty-two out of 506 fecal specimens were diagnosed as Giardia-positive by microscopy with an infection rate of 6.3%. 23 and 16 of the samples were typed as assemblage E by the TPI (530 bp) and GDH (450 bp) genes, respectively. These findings indicated that there was a different distribution of subtypes of assemblage E in different areas. The zoonosis genotypes such as assemblage A or B was not found in the present study.

Study on the Shear Resistance Performance of Grouped Stud Connectors.

In order to further investigate the grouped stud effect on the force properties of stud connectors, based on the premise that the correctness of the finite element simulation method, in this paper, a finite element model of grouped stud connectors was developed, and the grouped stud effect and its sensitivity factors were analyzed in order to validate the recommended formula for calculating the shear capacity of grouped stud connectors. Results show that the number of grouped stud rows and stud row spacing have a significant influence on the grouped stud effect, and the unevenness coefficient of grouped stud force is negatively correlated with the number of grouped stud rows as well as the grouped stud row spacing. Grouped stud connectors with commonly used concrete grades greater than C50 and height-to-diameter ratios of greater than 4 in steel-concrete composite structural bridges are insensitive to changes in the concrete strength grades and the length of the studs. The direction of force transmission for grouped stud changes with the change in loading angle and the unevenness coefficient of force for the grouped stud will therefore be reduced. By comparing the results of the 62 existing groups of grouped stud connectors push-out tests, the mean of the tested to calculated value ratio was found to be 1.12, the variance was 0.023, the dispersion was small, and it was shown that the recommended formula has a high degree of accuracy. The results of this paper can be used as a theoretical basis for the study of the shear stress performance of grouped stud connectors.

Ultraviolet-Irradiated All-Organic Nanocomposites with Polymer Dots for High-Temperature Capacitive Energy Storage.

Polymer dielectrics capable of operating efficiently at high electric fields and elevated temperatures are urgently demanded by next-generation electronics and electrical power systems. While inorganic fillers have been extensively utilized to improved high-temperature capacitive performance of dielectric polymers, the presence of thermodynamically incompatible organic and inorganic components may lead to concern about the long-term stability and also complicate film processing. Herein, zero-dimensional polymer dots with high electron affinity are introduced into photoactive allyl-containing poly(aryl ether sulfone) to form the all-organic polymer composites for high-temperature capacitive energy storage. Upon ultraviolet irradiation, the crosslinked polymer composites with polymer dots are efficient in suppressing electrical conduction at high electric fields and elevated temperatures, which significantly reduces the high-field energy loss of the composites at 200 °C. Accordingly, the ultraviolet-irradiated composite film exhibits a discharged energy density of 4.2 J cm-3 at 200 °C. Along with outstanding cyclic stability of capacitive performance at 200 °C, this work provides a promising class of dielectric materials for robust high-performance all-organic dielectric nanocomposites.

Hydrogen Bonding of Aramid Boosts High-Temperature Capacitive Properties of Polyetherimide Blends.

Polyetherimide (PEI) is the state-of-the-art commercial high-temperature polymer dielectric with excellent thermal and chemical stability and relatively high high-temperature capacitive energy storage properties. The rotation of the dipoles in the PEI chains brings the ß-relaxation which seriously increases the leakage current and decreases the charge-discharge efficiency. In this work, hydrogen bonds have been introduced to limit the dipole rotation of PEI by blending aramids [1,4-poly(ether fluoromethyl naphthalene amide), PNFA] into the PEI matrix. By introducing 10 wt % PNFA, the ß-relaxation of the blend has been significantly reduced which could be observed from the dielectric spectrum. To explore the mechanism of limited ß-relaxation, we analyze the hydrogen bonds in the blend films by infrared spectroscopy and found that the maximum content of hydrogen-bonded carbonyl formed between PNFA and PEI chains was 14.3% when the content of PNFA was 30 wt %. The content of hydrogen bonds formed between PNFA and PEI was positively correlated with the energy storage performance of the blends. The maximum discharged energy density with an efficiency above 90% of the blend film with 30 wt % PNFA reaches 4.1 J cm-3 at 150 °C, which is about 350% higher than that of pristine PEI. This work shows that composing hydrogen bonds by the blending method could be a viable strategy for enhancing the high-temperature energy storage performance of polymer dielectrics, which could be achieved by large-scale preparation and has feasible industrial production prospects.

Computed tomography angiography-based radiomics model to identify high-risk carotid plaques.

Background: Extracranial atherosclerosis is one of the major causes of stroke. Carotid computed tomography angiography (CTA) is a widely used imaging modality that allows detailed assessments of plaque characteristics. This study aimed to develop and test radiomics models of carotid plaques and perivascular adipose tissue (PVAT) to distinguish symptomatic from asymptomatic plaques and compare the diagnostic value between radiomics models and traditional CTA model. Methods: A total of 144 patients with carotid plaques were divided into symptomatic and asymptomatic groups. The traditional CTA model was built by the traditional radiological features of carotid plaques measured on CTA images which were screened by univariate analysis and multivariable logistic regression. We extracted and screened radiomics features from carotid plaques and PVAT. Then, a support vector machine was used for building plaque and PVAT radiomics models, as well as a combined model using traditional CTA features and radiomics features. The diagnostic value between radiomics models and traditional CTA model was compared in identifying symptomatic carotid plaques by Delong method. Results: The area under curve (AUC) values of traditional CTA model were 0.624 and 0.624 for the training and validation groups, respectively. The plaque radiomics model and PVAT radiomics model achieved AUC values of 0.766, 0.740 and 0.759, 0.618 in the two groups, respectively. Meanwhile, the combined model of plaque and PVAT radiomics features and traditional CTA features had AUC values of 0.883 and 0.840 for the training and validation groups, respectively, and the receiver operating characteristic curves of combined model were significantly better than those of traditional CTA model in the training group (P<0.001) and validation group (P=0.029). Conclusions: The combined model of the radiomics features of carotid plaques and PVAT and the traditional CTA features significantly contributes to identifying high-risk carotid plaques compared with traditional CTA model.

Cephalopod-inspired polymer composites with mechanically tunable infrared properties.

Cephalopods have evolved an all-soft skin that can rapidly display colors for protection, predation, or communication. Development of synthetic analogs to mimic such color-changing abilities in the infrared (IR) region is pivotal to a variety of technologies ranging from soft robotics, flexible displays, dynamic thermoregulatory systems, to adaptive IR disguise platforms. However, the integration of tissue-like mechanical properties and rapid IR modulation ability into smart materials remains challenging. Here, by drawing inspiration from cephalopod skin, we develop an all-soft adaptive IR composite that can dynamically change its IR appearance upon equiaxial stretching. The biomimetic composite is built entirely from soft materials of liquid metal droplets and elastic elastomer, which are analogs of chromatophores and dermal layer of cephalopod skin, respectively. Driven by externally applied strains, the liquid metal inclusions transition between a contracted droplet state with corrugated surface and an expanded platelet state with relatively smooth surface, enabling dynamic variations in the IR reflectance/emissivity of the composite and ultimately resulting in reversible IR adaption. Strain-actuated flexible IR displays and pneumatically-driven soft devices that can dynamically manipulate their IR appearance are demonstrated as examples of the applicability of this material in emerging adaptive soft electronics.